| Age | Commit message (Collapse) | Author |
|---|
|
Pull ARM updates from Russell King:
- UEFI boot and runtime services support for ARM from Ard Biesheuvel
and Roy Franz.
- DT compatibility with old atags booting protocol for Nokia N900
devices from Ivaylo Dimitrov.
- PSCI firmware interface using new arm-smc calling convention from
Jens Wiklander.
- Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
support these instructions from Nicolas Pitre.
- L2x0 cache updates from Dirk B and Linus Walleij.
- Randconfig fixes from Arnd Bergmann.
- ARMv7M (nommu) updates from Ezequiel Garcia
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
ARM: 8481/2: drivers: psci: replace psci firmware calls
ARM: 8480/2: arm64: add implementation for arm-smccc
ARM: 8479/2: add implementation for arm-smccc
ARM: 8478/2: arm/arm64: add arm-smccc
ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
ARM: add UEFI stub support
ARM: wire up UEFI init and runtime support
ARM: only consider memblocks with NOMAP cleared for linear mapping
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm[64] perf updates from Will Deacon:
"In the past, I have funnelled perf updates through the respective
architecture trees, but now that the arm/arm64 perf driver has been
largely consolidated under drivers/perf/, it makes more sense to send
a separate pull, particularly as I'm listed as maintainer for all the
files involved. I offered the branch to arm-soc, but Arnd suggested
that I just send it to you directly.
So, here is the arm/arm64 perf queue for 4.5. The main features are
described below, but the most useful change is from Drew, which
advertises our architected event mapping in sysfs so that the perf
tool is a lot more user friendly and no longer requires the use of
magic hex constants for profiling common events.
- Support for the CPU PMU in Cortex-A72
- Add sysfs entries to describe the architected events and their
mappings for PMUv{1-3}"
* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: add support for Cortex-A72
arm64: perf: add format entry to describe event -> config mapping
ARM: perf: add format entry to describe event -> config mapping
arm64: kernel: enforce pmuserenr_el0 initialization and restore
arm64: perf: Correct Cortex-A53/A57 compatible values
arm64: perf: Add event descriptions
arm64: perf: Convert event enums to #defines
arm: perf: Add event descriptions
arm: perf: Convert event enums to #defines
drivers/perf: kill armpmu_register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Here is the core arm64 queue for 4.5. As you might expect, the
Christmas break resulted in a number of patches not making the final
cut, so 4.6 is likely to be larger than usual. There's still some
useful stuff here, however, and it's detailed below.
The EFI changes have been Reviewed-by Matt and the memblock change got
an "OK" from akpm.
Summary:
- Support for a separate IRQ stack, although we haven't reduced the
size of our thread stack just yet since we don't have enough data
to determine a safe value
- Refactoring of our EFI initialisation and runtime code into
drivers/firmware/efi/ so that it can be reused by arch/arm/.
- Ftrace improvements when unwinding in the function graph tracer
- Document our silicon errata handling process
- Cache flushing optimisation when mapping executable pages
- Support for hugetlb mappings using the contiguous hint in the pte"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (45 commits)
arm64: head.S: use memset to clear BSS
efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
arm64: entry: remove pointless SPSR mode check
arm64: mm: move pgd_cache initialisation to pgtable_cache_init
arm64: module: avoid undefined shift behavior in reloc_data()
arm64: module: fix relocation of movz instruction with negative immediate
arm64: traps: address fallout from printk -> pr_* conversion
arm64: ftrace: fix a stack tracer's output under function graph tracer
arm64: pass a task parameter to unwind_frame()
arm64: ftrace: modify a stack frame in a safe way
arm64: remove irq_count and do_softirq_own_stack()
arm64: hugetlb: add support for PTE contiguous bit
arm64: Use PoU cache instr for I/D coherency
arm64: Defer dcache flush in __cpu_copy_user_page
arm64: reduce stack use in irq_handler
arm64: mm: ensure that the zero page is visible to the page table walker
arm64: Documentation: add list of software workarounds for errata
arm64: mm: place __cpu_setup in .text
arm64: cmpxchg: Don't incldue linux/mmdebug.h
arm64: mm: fold alternatives into .init
...
|
|
Dell Latitude E5550 (1028:062c) has a white noise problem like other
Latitude E models, and it gets fixed by the very same quirk as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110591
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:
PCI-MSI 442368-edge snd_hda_intel:card1
PCI-MSI 49152-edge snd_hda_intel:card0
NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation. This can be used
generically for other drivers as well. The changes for others will
follow later -- tiwai
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add virt_ barriers to list of barriers to check for
presence of a comment.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Introduction of __smp barriers cleans up a bunch of duplicate code, but
it gives people an additional handle onto a "new" set of barriers - just
because they're prefixed with __* unfortunately doesn't stop anyone from
using it (as happened with other arch stuff before.)
Add a checkpatch test so it will trigger a warning.
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
SMP-only barriers were missing in checkpatch.pl
Refactor code slightly to make adding more variants easier.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
checkpatch.pl wants arrays of strings declared as follows:
static const char * const names[] = { "vq-1", "vq-2", "vq-3" };
Currently the find_vqs() function takes a const char *names[] argument
so passing checkpatch.pl's const char * const names[] results in a
compiler error due to losing the second const.
This patch adjusts the find_vqs() prototype and updates all virtio
transports. This makes it possible for virtio_balloon.c, virtio_input.c,
virtgpu_kms.c, and virtio_rpmsg_bus.c to use the checkpatch.pl-friendly
type.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
|
|
In balloon_page_dequeue, pages_lock should cover the loop
(ie, list_for_each_entry_safe). Otherwise, the cursor page could
be isolated by compaction and then list_del by isolation could
poison the page->lru.{prev,next} so the loop finally could
access wrong address like this. This patch fixes the bug.
general protection fault: 0000 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000
RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130
RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246
RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d
RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68
RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000
R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0
R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060
FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0
Stack:
0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060
0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020
ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060
Call Trace:
[<ffffffff812c86d3>] leak_balloon+0x93/0x1a0
[<ffffffff812c8bc7>] balloon+0x217/0x2a0
[<ffffffff8143739e>] ? __schedule+0x31e/0x8b0
[<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0
[<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0
[<ffffffff8105b6e9>] kthread+0xc9/0xe0
[<ffffffff8105b620>] ? kthread_park+0x60/0x60
[<ffffffff8143b4af>] ret_from_fork+0x3f/0x70
[<ffffffff8105b620>] ? kthread_park+0x60/0x60
Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89
RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130
RSP <ffff8800a7fefdc0>
---[ end trace 43cf28060d708d5f ]---
Kernel panic - not syncing: Fatal exception
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Cc: <stable@vger.kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
|
|
During my compaction-related stuff, I encountered a bug
with ballooning.
With repeated inflating and deflating cycle, guest memory(
ie, cat /proc/meminfo | grep MemTotal) is decreased and
couldn't be recovered.
The reason is balloon_lock doesn't cover release_pages_balloon
so struct virtio_balloon fields could be overwritten by race
of fill_balloon(e,g, vb->*pfns could be critical).
This patch fixes it in my test.
Cc: <stable@vger.kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As per: lkml.kernel.org/r/20150921112252.3c2937e1@mschwide
atomics imply a barrier on s390, so s390 should change
smp_mb__before_atomic and smp_mb__after_atomic to barrier() instead of
smp_mb() and hence should not use the generic versions.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The s390 kernel is SMP to 99.99%, we just didn't bother with a
non-smp variant for the memory-barriers. If the generic header
is used we'd get the non-smp version for free. It will save a
small amount of text space for CONFIG_SMP=n.
Suggested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
drivers/xen/events/events_fifo.c uses rmb() to communicate with the
other side.
For guests compiled with CONFIG_SMP, smp_rmb would be sufficient, so
rmb() here is only needed if a non-SMP guest runs on an SMP host.
Switch to the virt_rmb barrier which serves this exact purpose.
Pull in asm/barrier.h here to make sure the file is self-contained.
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
include/xen/interface/io/ring.h uses
full memory barriers to communicate with the other side.
For guests compiled with CONFIG_SMP, smp_wmb and smp_mb
would be sufficient, so mb() and wmb() here are only needed if
a non-SMP guest runs on an SMP host.
Switch to virt_xxx barriers which serve this exact purpose.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
drivers/xen/xenbus/xenbus_comms.c uses
full memory barriers to communicate with the other side.
For guests compiled with CONFIG_SMP, smp_wmb and smp_mb
would be sufficient, so mb() and wmb() here are only needed if
a non-SMP guest runs on an SMP host.
Switch to virt_xxx barriers which serve this exact purpose.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
We need a full barrier after writing out event index, using
virt_store_mb there seems better than open-coding. As usual, we need a
wrapper to account for strong barriers.
It's tempting to use this in vhost as well, for that, we'll
need a variant of smp_store_mb that works on __user pointers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Looks like future sh variants will support a 4-byte cas which will be
used to implement 1 and 2 byte xchg.
This is exactly what we do for llsc now, move the portable part of the
code into a separate header so it's easy to reuse.
Suggested-by: Rich Felker <dalias@libc.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This completes the xchg implementation for sh architecture. Note: The
llsc variant is tricky since this only supports 4 byte atomics, the
existing implementation of 1 byte xchg is wrong: we need to do a 4 byte
cmpxchg and retry if any bytes changed meanwhile.
Write this in C for clarity.
Suggested-by: Rich Felker <dalias@libc.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
virtio ring uses smp_wmb on SMP and wmb on !SMP,
the reason for the later being that it might be
talking to another kernel on the same SMP machine.
This is exactly what virt_xxx barriers do,
so switch to these instead of homegrown ifdef hacks.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This reverts commit 9e1a27ea42691429e31f158cce6fc61bc79bb2e9.
While that commit optimizes !CONFIG_SMP, it mixes
up DMA and SMP concepts, making the code hard
to figure out.
A better way to optimize this is with the new __smp_XXX
barriers.
As a first step, go back to full rmb/wmb barriers
for !SMP.
We switch to __smp_XXX barriers in the next patch.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Guests running within virtual machines might be affected by SMP effects even if
the guest itself is compiled without SMP support. This is an artifact of
interfacing with an SMP host while running an UP kernel. Using mandatory
barriers for this use-case would be possible but is often suboptimal.
In particular, virtio uses a bunch of confusing ifdefs to work around
this, while xen just uses the mandatory barriers.
To better handle this case, low-level virt_mb() etc macros are made available.
These are implemented trivially using the low-level __smp_xxx macros,
the purpose of these wrappers is to annotate those specific cases.
These have the same effect as smp_mb() etc when SMP is enabled, but generate
identical code for SMP and non-SMP systems. For example, virtual machine guests
should use virt_mb() rather than smp_mb() when synchronizing against a
(possibly SMP) host.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for x86,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This defines __smp_xxx barriers for xtensa,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for tile,
for use by virtualization.
Some smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Note: for 32 bit, keep smp_mb__after_atomic around since it's faster
than the generic implementation.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for sparc,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
sh variant of smp_store_mb() calls xchg() on !SMP which is stronger than
implied by both the name and the documentation.
define __smp_store_mb instead: code in asm-generic/barrier.h
will then define smp_store_mb correctly depending on
CONFIG_SMP.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for s390,
for use by virtualization.
Some smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Note: smp_mb, smp_rmb and smp_wmb are defined as full barriers
unconditionally on this architecture.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for mips,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Note: the only exception is smp_mb__before_llsc which is mips-specific.
We define both the __smp_mb__before_llsc variant (for use in
asm/barriers.h) and smp_mb__before_llsc (for use elsewhere on this
architecture).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for metag,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Note: as __smp_XX macros should not depend on CONFIG_SMP, they can not
use the existing fence() macro since that is defined differently between
SMP and !SMP. For this reason, this patch introduces a wrapper
metag_fence() that doesn't depend on CONFIG_SMP.
fence() is then defined using that, depending on CONFIG_SMP.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for ia64,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
This reduces the amount of arch-specific boiler-plate code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for blackfin,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for arm,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
This reduces the amount of arch-specific boiler-plate code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for arm64,
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
Note: arm64 does not support !SMP config,
so smp_xxx and __smp_xxx are always equivalent.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
This defines __smp_xxx barriers for powerpc
for use by virtualization.
smp_xxx barriers are removed as they are
defined correctly by asm-generic/barriers.h
This reduces the amount of arch-specific boiler-plate code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On !SMP, most architectures define their
barriers as compiler barriers.
On SMP, most need an actual barrier.
Make it possible to remove the code duplication for
!SMP by defining low-level __smp_xxx barriers
which do not depend on the value of SMP, then
use them from asm-generic conditionally.
Besides reducing code duplication, these low level APIs will also be
useful for virtualization, where a barrier is sometimes needed even if
!SMP since we might be talking to another kernel on the same SMP system.
Both virtio and Xen drivers will benefit.
The smp_xxx variants should use __smp_XXX ones or barrier() depending on
SMP, identically for all architectures.
We keep ifndef guards around them for now - once/if all
architectures are converted to use the generic
code, we'll be able to remove these.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
As on most architectures, on x86 read_barrier_depends and
smp_read_barrier_depends are empty. Drop the local definitions and pull
the generic ones from asm-generic/barrier.h instead: they are identical.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On x86/um CONFIG_SMP is never defined. As a result, several macros
match the asm-generic variant exactly. Drop the local definitions and
pull in asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On mips dma_rmb, dma_wmb, smp_store_mb, read_barrier_depends,
smp_read_barrier_depends, smp_store_release and smp_load_acquire match
the asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On metag dma_rmb, dma_wmb, smp_store_mb, read_barrier_depends,
smp_read_barrier_depends, smp_store_release and smp_load_acquire match
the asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On arm64 nop, read_barrier_depends, smp_read_barrier_depends
smp_store_mb(), smp_mb__before_atomic and smp_mb__after_atomic match the
asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On arm smp_store_mb, read_barrier_depends, smp_read_barrier_depends,
smp_store_release, smp_load_acquire, smp_mb__before_atomic and
smp_mb__after_atomic match the asm-generic variants exactly. Drop the
local definitions and pull in asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On sparc 64 bit dma_rmb, dma_wmb, smp_store_mb, smp_mb, smp_rmb,
smp_wmb, read_barrier_depends and smp_read_barrier_depends match the
asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
nop uses __asm__ __volatile but is otherwise identical to
the generic version, drop that as well.
This is in preparation to refactoring this code area.
Note: nop() was in processor.h and not in barrier.h as on other
architectures. Nothing seems to depend on it being there though.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On s390 read_barrier_depends, smp_read_barrier_depends
smp_store_mb(), smp_mb__before_atomic and smp_mb__after_atomic match the
asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
On powerpc read_barrier_depends, smp_read_barrier_depends
smp_store_mb(), smp_mb__before_atomic and smp_mb__after_atomic match the
asm-generic variants exactly. Drop the local definitions and pull in
asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
On ia64 smp_rmb, smp_wmb, read_barrier_depends, smp_read_barrier_depends
and smp_store_mb() match the asm-generic variants exactly. Drop the
local definitions and pull in asm-generic/barrier.h instead.
This is in preparation to refactoring this code area.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
asm-generic/barrier.h defines a nop() macro.
To be able to use this header on ia64, we shouldn't
call local functions/variables nop().
There's one instance where this breaks on ia64:
rename the function to iosapic_nop to avoid the conflict.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Allow architectures to override smp_store_release
and smp_load_acquire by guarding the defines
in asm-generic/barrier.h with ifndef directives.
This is in preparation to reusing asm-generic/barrier.h
on architectures which have their own definition
of these macros.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
With commit b92b8b35a2e ("locking/arch: Rename set_mb() to smp_store_mb()")
it was made clear that the context of this call (and thus set_mb)
is strictly for CPU ordering, as opposed to IO. As such all archs
should use the smp variant of mb(), respecting the semantics and
saving a mandatory barrier on UP.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1445975631-17047-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change, limiting the return values for coldfire gpio get
function"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/gpio: Be sure to clamp return value
|
