summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-20arm64: dts: imx8mq: Add src node interruptsAnson Huang
Interrupts is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20arm64: dts: imx8m: assign clocks for A53Peng Fan
Assign IMX8M*_CLK_A53_SRC's parent to system pll1 and assign IMX8M*_CLK_A53_CORE's parent to arm pll out as what is done in drivers/clk/imx/clk-imx8m*.c, then we could remove the settings in driver which triggers lockdep warning. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20arm64: dts: freescale: sl28: enable LPUART1Michael Walle
Now that the LPUART has support for the LS1028A SoC, also enable it on our board. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20ARM: dts: imx50: Remove unused iomuxc-gpr nodeFabio Estevam
The iomuxc-gpr node is not used and causes the following dtc warning with W=1: arch/arm/boot/dts/imx50.dtsi:286.28-289.6: Warning (unique_unit_address): /soc/bus@50000000/iomuxc@53fa8000: duplicate unit-address (also used in node /soc/bus@50000000/iomuxc-gpr@53fa8000) Remove the node to fix the warning. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20arm64: dts: ls1043a-rdb: add compatible for boardYangbo Lu
Add compatible for board to identify. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-19arm64: dts: meson: add ethernet interrupt to wetek dtsiChristian Hewitt
Add Ethernet interrupt details to the WeTek Hub/Play2 dtsi to resolve an issue with Ethernet probing in mainline u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200518025451.16401-1-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: add support for the Smartlabs SML-5442TWChristian Hewitt
The Smartlabs SML-5442TW is based on the Amlogic P231 reference design but with the following differences: - The Yellow and Blue LEDs are available but disabled - The Red and Green LEDs are used to signal off/on status - uart_AO can be accessed after opening the case; soldered pins exist - QCA9377 instead of the usual Ampak/Broadcom module Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200510124129.31575-4-christianshewitt@gmail.com
2020-05-19dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TWChristian Hewitt
The SML-5442TW is an STB for O2 Czech IPTV/VOD and DVB-T/T2 based on the Amlogic P231 reference design using the S905D chipset. Specs: 2GB DDR3 RAM 8GB eMMC storage 10/100 Base-T Ethernet 802.11 a/b/g/n/ac + BT 4.1 HS sdio wireless module (QCA9377) 2x single colour and 1x dual colour LEDs on the front panel 1x reset button on the front panel HDMI 2.0 (4k@60p) video Composite video + 2-channel audio output on 3.5mm jack S/PDIF audio output Single DVB-T/T2 tuner (AVL6762/MxL608) 2x USB 2.0 ports 1x micro SD card slot UART pins (internal) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200510124129.31575-3-christianshewitt@gmail.com
2020-05-19dt-bindings: add vendor prefix for Smartlabs LLCChristian Hewitt
Smartlabs LLC are a professional integrator of Interactive TV solutions and IPTV/VOD devices [1]. [1] https://www.smartlabs.tv/en/about/ Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200510124129.31575-2-christianshewitt@gmail.com
2020-05-19arm64: dts: meson: g12: add internal DAC glueJerome Brunet
add the internal DAC glue support on the g12 and sm1 family This glue connects the different TDM interfaces of the SoC to the internal audio DAC codec. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-8-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: g12: add internal DACJerome Brunet
add internal audio DAC support on the g12 and sm1 SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-7-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-pc: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 9J4 connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-6-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-ac: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 9J5 connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-5-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-cc: add internal DAC supportJerome Brunet
Add the internal DAC support on the libretech CC. The output of this DAC is provided on the 3.5mm jack connector. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-4-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: p230-q200: add internal DAC supportJerome Brunet
Add the necessary bits to support the internal audio DAC the p230/q200 reference design derivated boards. The output of this DAC is provided on the 3.5mm jack connector Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-3-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: gxl: add acodec supportJerome Brunet
Add the internal audio DAC to the gxl SoC DT Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506221656.477379-2-jbrunet@baylibre.com
2020-05-19arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4Dongjin Kim
Add the board support for the Hardkernel Odroid-C4 single board computer. The Odroid-C4 is the Odroid-C2 successor with same form factor, but using a modern Amlogic S905X3 (SM1) SoC and 4x USB3 ports. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200506080702.6645-3-narmstrong@baylibre.com
2020-05-19dt-bindings: arm: amlogic: add odroid-c4 bindingsNeil Armstrong
Add the board bindings for the Hardkernel Odroid-C4 single board computer. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200506080702.6645-2-narmstrong@baylibre.com
2020-05-19arm64: dts: meson-sm1: add cpu thermal nodesNeil Armstrong
Add thermal nodes for the Amlogic SM1 SoCs based on the G12A and G12B thermal nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512093916.19676-3-narmstrong@baylibre.com
2020-05-19arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsiNeil Armstrong
The G12B thermal nodes should be in the meson-g12b.dtsi file. Fixes: 195f140318a9 ("arm64: dts: meson: g12b: add cooling properties") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512093916.19676-2-narmstrong@baylibre.com
2020-05-19arm64: dts: meson: libretech-pc: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-7-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-ac: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-6-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: libretech-cc: add initial audio playback supportJerome Brunet
Add initial audio support limited to HDMI i2s. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-5-jbrunet@baylibre.com
2020-05-19arm64: dts: meson: p230-q200: add initial audio playback supportJerome Brunet
Add basic audio support on the p230/q200 reference design. This initial support is limited to HDMI i2s and SPDIF (LPCM). Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
2020-05-19arm64: dts: meson-gx: add aiu supportJerome Brunet
Add the AIU audio device to the Amlogic GX SoC family DT. ATM, this device provides the i2s and spdif output stages and also the hdmi and internal codec glues. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20200421163935.775935-3-jbrunet@baylibre.com
2020-05-19Merge branch 'reset/meson-gxl-dac' of git://git.pengutronix.de/pza/linux ↵Kevin Hilman
into HEAD * 'reset/meson-gxl-dac' of git://git.pengutronix.de/pza/linux: dt-bindings: reset: meson: add gxl internal dac reset
2020-05-19ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"Martin Blumenstingl
Let the PHY generate the RX and TX delay on the Odroid-C1 and MXIII Plus. Previously we did not know that these boards used an RX delay. We assumed that setting the TX delay on the MAC side It turns out that these boards also require an RX delay of 2ns (verified on Odroid-C1, but the u-boot code uses the same setup on both boards). Ethernet only worked because u-boot added this RX delay on the MAC side. The 4ns TX delay was also wrong and the result of using an unsupported RGMII TX clock divider setting. This has been fixed in the driver with commit bd6f48546b9cb7 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs"). Switch to phy-mode "rgmii-id" to let the PHY side handle all the delays, (as recommended by the Ethernet maintainers anyways) to correctly describe the need for a 2ns RX as well as 2ns TX delay on these boards. This fixes the Ethernet performance on Odroid-C1 where there was a huge amount of packet loss when transmitting data due to the incorrect TX delay. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512215148.540322-3-martin.blumenstingl@googlemail.com
2020-05-19ARM: dts: meson: Add the Ethernet "timing-adjustment" clockMartin Blumenstingl
Add the "timing-adjusment" clock now that we now that this is connected to the PRG_ETHERNET registers. It is used internally to generate the RGMII RX delay no the MAC side (if needed). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200512215148.540322-2-martin.blumenstingl@googlemail.com
2020-05-19ARM: dts: meson8m2: Use the Meson8m2 specific USB2 PHY compatibleMartin Blumenstingl
Use the Meson8m2 specific USB2 PHY compatible string. The 3.10 vendor kernel has at least one known difference between Meson8 and Meson8m2: Meson8m2 sets the ACA_ENABLE bit while Meson8 doesn't. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200515202520.1487514-1-martin.blumenstingl@googlemail.com
2020-05-19ARM: dts: meson: add the gadget mode properties to the USB0 controllerMartin Blumenstingl
Testing with a USB RNDIS connection and iperf3 gives the following results: - From the host computer to the device at ~250Mbit/s - From the device to the host computer at ~76Mbit/s Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200504195105.2909711-1-martin.blumenstingl@googlemail.com
2020-05-19arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399Johan Jonker
The pd_tcpc0 and pd_tcpc1 nodes are currently a sub node of pd_vio. In the rk3399 TRM figure of the 'Power Domain Partition' and in the table of 'Power Domain and Voltage Domain Summary' these power domains are positioned directly under VD_LOGIC, so fix that in 'rk3399.dtsi'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Link: https://lore.kernel.org/r/20200428203003.3318-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-18arm64: dts: qcom: sc7180: Correct the pdc interrupt rangesMaulik Shah
Few PDC interrupts do not map to respective parent GIC interrupt. Fix this by correcting the pdc interrupt map. Fixes: 22f185ee81d2 ("arm64: dts: qcom: sc7180: Add pdc interrupt controller") Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1589804402-27130-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-18arm64: dts: qcom: sc7180: add IPA informationAlex Elder
Add IPA-related nodes and definitions to "sc7180.dtsi". Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200518214939.9730-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-19ARM: dts: rockchip: add rga node for rk322xJustin Swartz
Add a node to define the presence of RGA, a 2D raster graphic acceleration unit. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20200419125134.29923-2-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19ARM: dts: remove disable-wp from rk3229-xms6 emmcJustin Swartz
Remove the disable-wp attribute from &emmc as it is, according to Documentation/devicetree/bindings/mmc/mmc-controller.yaml: "Not used in combination with eMMC or SDIO." Suggested-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20200406135006.23759-2-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19ARM: dts: enable WLAN for Mecer Xtreme Mini S6Justin Swartz
The Mecer Xtreme Mini S6 features a wireless module, based on a Realtek 8723BS, which provides WLAN and Bluetooth connectivity via SDIO and UART interfaces respectively. Define a simple MMC power sequence that declares the GPIO pins connected to the module's WLAN Disable and Bluetooth Disable pins as active low reset signals, because both signals must be deasserted for WLAN radio operation. Configure the host's SDIO interface for High Speed mode with 1.8v I/O signalling and IRQ detection over a 4-bit wide bus. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20200406135006.23759-1-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: add bus-width properties to mmc nodes for px30Johan Jonker
'bus-width' and pinctrl containing the bus-pins should be in the same file, so add them to all mmc nodes in 'px30.dtsi'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200416183053.6045-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19ARM: dts: rockchip: remove identical #include from rk3288.dtsiJohan Jonker
There are 2 identical '#include' for 'rk3288-power.h', so remove one of them. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200403180159.13387-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19ARM: dts: rockchip: rename and label gpio-led subnodesJohan Jonker
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds: 'blue', 'green', 'sleep' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc nodeJohan Jonker
The mmc-controller.yaml didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20191219121954.2450-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: rename and label gpio-led subnodesJohan Jonker
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds: 'work' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200428144933.10953-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix defines in pd_vio node for rk3399Johan Jonker
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pd_vio@15: 'pd_tcpc0@RK3399_PD_TCPC0', 'pd_tcpc1@RK3399_PD_TCPC1' do not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+' Fix error by replacing the wrong defines by the ones mentioned in 'rk3399-power.h'. make -k ARCH=arm64 dtbs_check Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200428203003.3318-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepiJohan Jonker
A test with the command below this error: arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy: '#phy-cells' is a required property 'phy' is a reserved nodename and should not be used for pinctrl, so change it to 'gmac'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-6-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepiJohan Jonker
A test with the command below gives this error: arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy@1: '#phy-cells' is a required property The phy nodename is used by a phy-handle. The parent node is compatible with "snps,dwmac-mdio", so change nodename to 'ethernet-phy', for which '#phy-cells' is not a required property make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-5-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4Johan Jonker
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy: '#phy-cells' is a required property arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy: '#phy-cells' is a required property arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy: '#phy-cells' is a required property 'phy' is a reserved nodename and should not be used for pinctrl, so change it to 'gmac'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4Johan Jonker
A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy@1: '#phy-cells' is a required property arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy@1: '#phy-cells' is a required property arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy@1: '#phy-cells' is a required property The rtl8211e node is used by a phy-handle. The parent node is compatible with "snps,dwmac-mdio", so change nodename to 'ethernet-phy', for which '#phy-cells' is not a required property. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1Johan Jonker
A test with the command below gives this error: arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: phy@0: '#phy-cells' is a required property The rtl8211f node is used by a phy-handle. The parent node is compatible with "snps,dwmac-mdio", so change nodename to 'ethernet-phy', for which '#phy-cells' is not a required property. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19arm64: dts: rockchip: fix phy nodename for rk3328Johan Jonker
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: phy@0: '#phy-cells' is a required property The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200321215423.12176-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-18include: dt-bindings: rockchip: remove unused definesJohan Jonker
The Rockchip dtsi and dts files have been bulk-converted for the remaining raw gpio numbers into their descriptive counterparts and also got rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings, so remove the unused defines in 'rockchip.h' to prevent that someone start using them again. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200512203524.7317-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-18arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2Johan Jonker
The defines RK_FUNC_1 and RK_FUNC_2 are deprecated, so replace them with the preferred form. Restyle properties in the same line. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200512203524.7317-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-09-18 09:34:55 +0000