summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-21drm/vc4: Use drm_mode_copy()Ville Syrjälä
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
2022-02-21drm/panel: nt35560: Support also ACX424AKMLinus Walleij
Add some code and config to also support the ACX424AKM used in some Sony (Ericsson) Mobile phones. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-3-linus.walleij@linaro.org
2022-02-21drm/panel: nt35560: Support more panel IDsLinus Walleij
These IDs were found in the wild in a Sony Xperia vendor tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-2-linus.walleij@linaro.org
2022-02-21drm/panel: Rename Sony ACX424 to Novatek NT35560Linus Walleij
A code drop from Sony Mobile reveals that the ACX424 panels are built around the Novatek NT35560 panel controllers so just bite the bullet and rename the driver and all basic symbols so that we can modify this driver to cover any other panels also using the Novatek NT35560 display controller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-1-linus.walleij@linaro.org
2022-02-16drm/panel-edp: Add eDP sharp panel supportSankeerth Billakanti
Add support for the 14" sharp,lq140m1jw46 eDP panel. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1644494255-6632-5-git-send-email-quic_sbillaka@quicinc.com
2022-02-16dt-bindings: display: simple: Add sharp LQ140M1JW46 panelSankeerth Billakanti
Add support for sharp LQ140M1JW46 display panel. It is a 14" eDP panel with 1920x1080 display resolution. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1644494255-6632-2-git-send-email-quic_sbillaka@quicinc.com
2022-02-16fbdev: Don't sort deferred-I/O pages by defaultThomas Zimmermann
Fbdev's deferred I/O sorts all dirty pages by default, which incurs a significant overhead. Make the sorting step optional and update the few drivers that require it. Use a FIFO list by default. Most fbdev drivers with deferred I/O build a bounding rectangle around the dirty pages or simply flush the whole screen. The only two affected DRM drivers, generic fbdev and vmwgfx, both use a bounding rectangle. In those cases, the exact order of the pages doesn't matter. The other drivers look at the page index or handle pages one-by-one. The patch sets the sort_pagelist flag for those, even though some of them would probably work correctly without sorting. Driver maintainers should update their driver accordingly. Sorting pages by memory offset for deferred I/O performs an implicit bubble-sort step on the list of dirty pages. The algorithm goes through the list of dirty pages and inserts each new page according to its index field. Even worse, list traversal always starts at the first entry. As video memory is most likely updated scanline by scanline, the algorithm traverses through the complete list for each updated page. For example, with 1024x768x32bpp each page covers exactly one scanline. Writing a single screen update from top to bottom requires updating 768 pages. With an average list length of 384 entries, a screen update creates (768 * 384 =) 294912 compare operation. Fix this by making the sorting step opt-in and update the few drivers that require it. All other drivers work with unsorted page lists. Pages are appended to the list. Therefore, in the common case of writing the framebuffer top to bottom, pages are still sorted by offset, which may have a positive effect on performance. Playing a video [1] in mplayer's benchmark mode shows the difference (i7-4790, FullHD, simpledrm, kernel with debugging). mplayer -benchmark -nosound -vo fbdev ./big_buck_bunny_720p_stereo.ogg With sorted page lists: BENCHMARKs: VC: 32.960s VO: 73.068s A: 0.000s Sys: 2.413s = 108.441s BENCHMARK%: VC: 30.3947% VO: 67.3802% A: 0.0000% Sys: 2.2251% = 100.0000% With unsorted page lists: BENCHMARKs: VC: 31.005s VO: 42.889s A: 0.000s Sys: 2.256s = 76.150s BENCHMARK%: VC: 40.7156% VO: 56.3219% A: 0.0000% Sys: 2.9625% = 100.0000% VC shows the overhead of video decoding, VO shows the overhead of the video output. Using unsorted page lists reduces the benchmark's run time by ~32s/~25%. v2: * Make sorted pagelists the special case (Sam) * Comment on drivers' use of pagelist (Sam) * Warn about the overhead in comment Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_stereo.ogg # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-3-tzimmermann@suse.de
2022-02-16fbdev/defio: Early-out if page is already enlistedThomas Zimmermann
Return early if a page is already in the list of dirty pages for deferred I/O. This can be detected if the page's list head is not empty. Keep the list head initialized while the page is not enlisted to make this work reliably. v2: * update comment and fix spelling (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-2-tzimmermann@suse.de
2022-02-16dt-bindings: display: ssd1307fb: Add myself as binding co-maintainerJavier Martinez Canillas
The ssd130x DRM driver also makes use of this Device Tree binding to allow existing users of the fbdev driver to migrate without the need to change their Device Trees. Add myself as another maintainer of the binding, to make sure that I will be on Cc when patches are proposed for it. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133935.3278933-1-javierm@redhat.com
2022-02-16MAINTAINERS: Add entry for Solomon SSD130x OLED displays DRM driverJavier Martinez Canillas
To make sure that tools like the get_maintainer.pl script will suggest to Cc me if patches are posted for this driver. Also include the Device Tree binding for the old ssd1307fb fbdev driver since the new DRM driver was made compatible with the existing binding. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133915.3278886-1-javierm@redhat.com
2022-02-16drm/solomon: Add SSD130x OLED displays I2C supportJavier Martinez Canillas
The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over I2C. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-5-javierm@redhat.com
2022-02-16drm: Add driver for Solomon SSD130x OLED displaysJavier Martinez Canillas
This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon OLED display controllers. It's only the core part of the driver and a bus specific driver is needed for each transport interface supported by the display controllers. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-4-javierm@redhat.com
2022-02-16drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()Javier Martinez Canillas
Add support to convert from XR24 to reversed monochrome for drivers that control monochromatic display panels, that only have 1 bit per pixel. The function does a line-by-line conversion doing an intermediate step first from XR24 to 8-bit grayscale and then to reversed monochrome. The drm_fb_gray8_to_mono_reversed_line() helper was based on code from drivers/gpu/drm/tiny/repaper.c driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-3-javierm@redhat.com
2022-02-16drm/format-helper: Add drm_fb_xrgb8888_to_gray8_line()Javier Martinez Canillas
Pull the per-line conversion logic into a separate helper function. This will allow to do line-by-line conversion in other helpers that convert to a gray8 format. Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-2-javierm@redhat.com
2022-02-16drm/modes: Fix drm_mode_copy() docsVille Syrjälä
There is no object id in drm_display_mode anymore. Remove stale comments to the contrary. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-2-ville.syrjala@linux.intel.com Acked-by: Maxime Ripard <maxime@cerno.tech>
2022-02-16drm/vc4: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214020530.1714631-1-chi.minghao@zte.com.cn
2022-02-15drm/panel-edp: Allow querying the detected panel via debugfsDouglas Anderson
Recently we added generic "edp-panel"s probed by EDID. To support panels in this way we look at the panel ID in the EDID and look up the panel in a table that has power sequence timings. If we find a panel that's not in the table we will still attempt to use it but we'll use conservative timings. While it's likely that these conservative timings will work for most nearly all panels, the performance of turning the panel off and on suffers. We'd like to be able to reliably detect the case that we're using the hardcoded timings without relying on parsing dmesg. This allows us to implement tests that ensure that no devices get shipped that are relying on the conservative timings. Let's add a new debugfs entry to panel devices. It will have one of: * UNKNOWN - We tried to detect a panel but it wasn't in our table. * HARDCODED - We're not using generic "edp-panel" probed by EDID. * A panel name - This is the name of the panel from our table. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.3.I209d72bcc571e1d7d6b793db71bf15c9c0fc9292@changeid
2022-02-15drm: Plumb debugfs_init through to panelsDouglas Anderson
We'd like panels to be able to add things to debugfs underneath the connector's directory. Let's plumb it through. A panel will be able to put things in a "panel" directory under the connector's directory. Note that debugfs is not ABI and so it's always possible that the location that the panel gets for its debugfs could change in the future. NOTE: this currently only works if you're using a modern architecture. Specifically the plumbing relies on _both_ drm_bridge_connector and drm_panel_bridge. If you're not using one or both of these things then things won't be plumbed through. As a side effect of this change, drm_bridges can also get callbacks to put stuff underneath the connector's debugfs directory. At the moment all bridges in the chain have their debugfs_init() called with the connector's root directory. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
2022-02-15drm/bridge: ti-sn65dsi86: Use drm_bridge_connectorDouglas Anderson
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge connector. It should use the normal drm_bridge_connector. Let's switch to do that, removing all of the custom code. NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR support for ti-sn65dsi86 and that would still be a useful thing to do in the future. It was attempted in the past [1] but put on the back burner. However, unless we instantly change ti-sn65dsi86 fully from not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_ supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit of time when we support both. This is a better way to support the old way where the driver hand rolls things itself. A new notes about the implementation here: * When using the drm_bridge_connector the connector should be created after all the bridges, so we change the ordering a bit. * I'm reasonably certain that we don't need to do anything to "free" the new drm_bridge_connector. If drm_bridge_connector_init() returns success then we know drm_connector_init() was called with the `drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a .destroy() that does all the cleanup. drm_connector_init() calls __drm_mode_object_add() with a drm_connector_free() that will call the .destroy(). * I'm also reasonably certain that I don't need to "undo" the drm_bridge_attach() if drm_bridge_connector_init() fails. The "detach" function is private and other similar code doesn't try to undo the drm_bridge_attach() in error cases. There's also a comment indicating the lack of balance at the top of drm_bridge_attach(). [1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.1.I3ab26b7f197cc56c874246a43e57913e9c2c1028@changeid
2022-02-15drm/radeon: remove resource accounting v2Christian König
Use the one provided by TTM instead. v2: drop new_mem parameter as well Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-5-christian.koenig@amd.com
2022-02-14drm/bridge: anx7625: Fix overflow issue on reading EDIDPin-Yen Lin
The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
2022-02-14drm/amdgpu: remove VRAM accounting v2Christian König
This is provided by TTM now. Also switch man->size to bytes instead of pages and fix the double printing of size and usage in debugfs. v2: fix size checking as well Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-8-christian.koenig@amd.com
2022-02-14drm/amdgpu: remove PL_PREEMPT accountingChristian König
This is provided by TTM now. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-7-christian.koenig@amd.com
2022-02-14drm/amdgpu: remove GTT accounting v2Christian König
This is provided by TTM now. Also switch man->size to bytes instead of pages and fix the double printing of size and usage in debugfs. v2: fix size checking as well Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-6-christian.koenig@amd.com
2022-02-14drm/sprd: check the platform_get_resource() return valueKevin Tang
platform_get_resource() may fail and return NULL, so check it's value before using it. Reported-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/all/20220117084156.9338-1-kevin3.tang@gmail.com v1 -> v2: - new patch
2022-02-14drm/sprd: fix potential NULL dereferenceKevin Tang
'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/all/20220117084044.9210-1-kevin3.tang@gmail.com v1 -> v2: - Split checking platform_get_resource() return value to a separate patch - Use dev_warn() instead of removing the warning log
2022-02-14drm/sprd: remove the selected DRM_KMS_CMA_HELPER in kconfigKevin Tang
On commit 43531edd53f0 ("drm/sprd: add Unisoc's drm kms master"), adds the config DRM_SPRD, which selects DRM_KMS_CMA_HELPER. However, commit 09717af7d13d ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option") just removed the DRM_KMS_CMA_HELPER. So the select DRM_KMS_CMA_HELPER refers to a non-existing kconfig symbol. Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Kevin Tang <kevin3.tang@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/all/20220117083820.6893-2-kevin3.tang@gmail.com v1 -> v2: - fix commit comments long lines issue and drop "On linux-next" comments
2022-02-14drm/ttm: add common accounting to the resource mgr v3Christian König
It makes sense to have this in the common manager for debugging and accounting of how much resources are used. v2: cleanup kerneldoc a bit v3: drop the atomic, update counter under lock instead Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> (v1) Reviewed-by: Matthew Auld <matthew.auld@intel.com> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-2-christian.koenig@amd.com
2022-02-14drm/ttm: fix resource manager size type and descriptionChristian König
Leave the man->size units as driver defined. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-1-christian.koenig@amd.com Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2022-02-14dt-bindings: drm/bridge: anx7625: Add aux-bus nodeHsin-Yi Wang
List panel under aux-bus node if it's connected to anx7625's aux bus. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-4-hsinyi@chromium.org
2022-02-14drm/bridge: anx7625: Support reading edid through aux channelHsin-Yi Wang
Support reading edid through aux channel if panel is connected to aux bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function: 1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move anx7625_parse_dt() after. 2. Use pm runtime autosuspend since aux transfer function is called multiple times when reading edid. 3. No-op if aux transfer length is 0. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-3-hsinyi@chromium.org
2022-02-14drm/bridge: anx7625: Convert to use devm_kzallocHsin-Yi Wang
Use devm_kzalloc instead of kzalloc and drop kfree(). Let the memory handled by driver detach. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-2-hsinyi@chromium.org
2022-02-14drm/bridge: anx7625: send DPCD command to downstreamXin Ji
Send DPCD command to downstream before anx7625 power down, let downstream monitor enter into standby mode. Signed-off-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213103437.3363848-1-hsinyi@chromium.org
2022-02-14drm/ingenic: Fix support for JZ4780 HDMI outputPaul Boddie
We have to make sure that - JZ_LCD_OSDC_ALPHAEN is set - plane f0 is disabled as it's not working yet Tested on MIPS Creator CI20 board. Signed-off-by: Paul Boddie <paul@boddie.org.uk> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Fixes: ef2f5d0aa121 ("drm/ingenic: prepare ingenic drm for later addition of JZ4780") Signed-off-by: Paul Cercueil <paul@crapouillou.net> [pcercuei: add proper fixes commit, slightly reword commit description] Link: https://patchwork.freedesktop.org/patch/msgid/9d3a2000d2bb014f1afb0613537bdc523202135d.1644681054.git.hns@goldelico.com
2022-02-14drm/gem-shmem: Don't store mmap'ed buffers in core dumpsThomas Zimmermann
Set the VM_DONTDUMP flag on mmap'ed VMAs to omit them from core dumps. It's display-buffer memory; who knows what secrets these buffers contain. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-3-tzimmermann@suse.de
2022-02-14drm/gem-shmem: Set vm_ops in static initializerThomas Zimmermann
Initialize default vm_ops in static initialization of the GEM SHMEM funcs, instead of the mmap code. It's simply better style. GEM helpers will later set a VMA's vm_ops from the default automatically. v2: * also update the drivers that build upon GEM SHMEM Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-2-tzimmermann@suse.de
2022-02-12dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT SchemaSam Ravnborg
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. Based on .txt binding from Zubair Lutfullah Kakakhel Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/c806c6007f7bb090bf96ff6bd827f03e88bf4712.1644675566.git.hns@goldelico.com
2022-02-12drm/lima: avoid error task dump attempt when not enabledErico Nunes
Currently when users try to run an application with lima and that hits an issue such as a timeout, a message saying "fail to save task state" and "error task list is full" is shown in dmesg. The error task dump is a debug feature disabled by default, so the error task list is usually not going to be available at all. The message can be misleading and creates confusion in bug reports. We can avoid that code path and that particular message when the user has not explicitly set the max_error_tasks parameter to enable the feature. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Reviewed-by: Qiang Yu <yuq825@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209093700.30901-1-nunes.erico@gmail.com
2022-02-11drm/amdgpu: Fix htmldoc warningAndrey Grodzovsky
Update function name. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211205500.601391-1-andrey.grodzovsky@amd.com
2022-02-11dt-bindings: gpu: mali-bifrost: describe clocks for the rk356x gpuAlex Bee
The Bifrost GPU in Rockchip RK356x SoCs has a core and a bus clock. Reflect this in the SoC specific part of the binding. Signed-off-by: Alex Bee <knaerzche@gmail.com> [move the changes to the SoC section] Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220209215549.94524-2-michael.riesch@wolfvision.net
2022-02-11drm/panfrost: Handle IDVS_GROUP_SIZE featureAlyssa Rosenzweig
The IDVS group size feature was missing. It is used on some Bifrost and Valhall GPUs, and is the last kernel-relevant Bifrost feature we're missing. This feature adds an extra IDVS group size field to the JM_CONFIG register. In kbase, the value is configurable via the device tree; kbase uses 0xF as a default if no value is specified. Until we find a device demanding otherwise, let's always set the 0xF default on devices which support this feature mimicking kbase's behaviour. Tuning this register slightly improves performance of index-driven vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is improved from 1026 to 1037. Geometry-heavy scenes like -bshading are improved from 1068 to 1098. Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211145849.3148-1-alyssa.rosenzweig@collabora.com
2022-02-11drm/syncobj: flatten dma_fence_chains on transferChristian König
It is illegal to add a dma_fence_chain as timeline point. Flatten out the fences into a dma_fence_array instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220209182600.434803-1-christian.koenig@amd.com
2022-02-10drm/bridge: dw-hdmi: use safe format when first in bridge chainNeil Armstrong
When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
2022-02-10drm/fb-helper: Clip damage area horizontallyThomas Zimmermann
Clip the damage area horizontally if only a single scanline has been changed. This is helpful to reduce the memcpy overhead for small writes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-6-tzimmermann@suse.de
2022-02-10drm/fb-helper: Clip damage area to written memory rangeThomas Zimmermann
Write helpers used to mark the complete screen as dirty. This is wasteful for writes that only change a small portion of the screen. Fix the problem by computing the damaged area from the written memory range and perform damage handling accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-5-tzimmermann@suse.de
2022-02-10drm/fb-helper: Calculate damaged area in separate helperThomas Zimmermann
Add drm_fb_helper_memory_range_to_clip(), a helper function that accepts an linear range of video memory and converts it into a rectangle. The computed rectangle describes the damaged area in terms of scanlines and pixels per scanline. While at it, make the code more readable by using struct drm_rect and related helpers. The code was previously part of the deferred I/O helpers, but is also useful for damage handling of regular write operations. Update the deferred I/O code to use the new function. v2: * rename helper (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-4-tzimmermann@suse.de
2022-02-10drm/fb-helper: Fix vertical damage clippingThomas Zimmermann
Don't clip the damage rectangle against the viewport. This only works if the viewport is located at the beginning of the video memory and the video memory doesn't extend the screen (i.e., if there's no overallocation). Fbdev emulation transfers data from write operations into a possible shadow buffer, then into a GEM buffer object, and finally via graphics driver onto the screen. If callers write outside the currently visible area, clipping the damage rectangle against the viewport will loose these updates in the shadow buffer and the fbdev's buffer object will contain stale data. Panning the viewport to the stale area of the buffer will display obsolete data. Instead, mark all written areas as damaged, so that the damage handler updates the buffer object from the shadow buffer for all such areas. The graphics driver's later has the option of clipping the damaged area against the viewport when updating the screen from the buffer object. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-3-tzimmermann@suse.de
2022-02-10drm/fb-helper: Fix clip rectangle heightThomas Zimmermann
Computing the clip rectangle is prone to off-by-one errors when writes happen near the end of a memory page. Point the end of the memory area to the first trailing byte, so that (end - start) returns the area's length. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209161617.3553-2-tzimmermann@suse.de
2022-02-10drm/amdgpu: Fix compile error.Andrey Grodzovsky
Seems I forgot to add this to the relevant commit when submitting. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220210031724.440943-1-andrey.grodzovsky@amd.com
2022-02-09drm/amdgpu: Revert 'drm/amdgpu: annotate a false positive recursive locking'Andrey Grodzovsky
Since we have a single instance of reset semaphore which we lock only once even for XGMI hive we don't need the nested locking hint anymore. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://www.spinics.net/lists/amd-gfx/msg74120.html
generated by cgit (git 2.34.1) at 2025-09-11 07:23:19 +0000