| Age | Commit message (Collapse) | Author |
|---|
|
The recently added ECC engine support introduced a generic property
named nand-ecc-engine for ecc engine phandle. This patch adds support
for this new property.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-4-gch981213@gmail.com
|
|
this code will be used in mediatek snfi spi-mem controller with
pipelined ECC engine.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-2-gch981213@gmail.com
|
|
We need to explicitly enumerate all the ID registers which we rely on
for CPU capabilities in __read_sysreg_by_encoding(), ID_AA64SMFR0_EL1 was
missed from this list so we trip a BUG() in paths which rely on that
function such as CPU hotplug. Add the register.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220427130828.162615-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-3-yangyingliang@huawei.com
|
|
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-2-yangyingliang@huawei.com
|
|
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-1-yangyingliang@huawei.com
|
|
Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?
Global variables should not be defined in headers. This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
fails
Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().
Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
asus-nb-wmi: probe of asus-nb-wmi failed with error 2
Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.
Fixes: e3d13da7f77d ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
|
|
asus_wmi_evaluate_method_buf()
This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.
Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220413073744.GB8812@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use kobj_to_dev() instead of open-coding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220425105446.3515663-1-chi.minghao@zte.com.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use kobj_to_dev() instead of open-coding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220425105525.3515831-1-chi.minghao@zte.com.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?
Global variables should not be defined in headers. This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.
Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:
WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
...
RIP: 0010:iocg_kick_waitq+0x392/0x3a0
Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
...
<IRQ>
ioc_timer_fn+0x2e0/0x1470
call_timer_fn+0xa1/0x2c0
...
As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fails
Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().
Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
asus-nb-wmi: probe of asus-nb-wmi failed with error 2
Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.
Fixes: e3d13da7f77d ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
|
|
asus_wmi_evaluate_method_buf()
This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.
Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220413073744.GB8812@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When CONFIG_DEBUG_FS is disabled, amd_pmc_get_smu_version() is unused:
drivers/platform/x86/amd-pmc.c:196:12: warning: unused function 'amd_pmc_get_smu_version' [-Wunused-function]
static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev)
^
1 warning generated.
Eliminate the warning by moving amd_pmc_get_smu_version() to the
CONFIG_DEBUG_FS block where it is used.
Fixes: b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220418213800.21257-1-nathan@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This code is convoluted and because it can be invoked post init via the
ACPI/CPPC code, all of the initialization functionality is built in instead
of being part of init text and init data.
As a first step create separate calls for the boot and the application
processors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de
|
|
as this can share code with the preexisting APERF/MPERF code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.478362457@linutronix.de
|
|
aperfmperf_get_khz() already excludes idle CPUs from APERF/MPERF sampling
and that's a reasonable decision. There is no point in sending up to two
IPIs to an idle CPU just because someone reads a sysfs file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.419880163@linutronix.de
|
|
`nf_flowtable_udp_timeout` sysctl option is available only
if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
disabled and CONFIG_NF_FLOW_TABLE enabled, the
`nf_flowtable_udp_timeout` is not present in sysfs.
Please note, that TCP flow offload timeout sysctl option
is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.
I suppose it was a typo in commit that adds UDP flow offload
timeout and CONFIG_NF_FLOW_TABLE should be used instead.
Fixes: 975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration")
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell
pinpointed to nf_conntrack tcp_in_window() bug.
tcp trace shows following sequence:
I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]>
R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..]
R > I Flags [P.], seq 1:89, ack 1, [..]
Note 3rd ACK is from responder to initiator so following branch is taken:
} else if (((state->state == TCP_CONNTRACK_SYN_SENT
&& dir == IP_CT_DIR_ORIGINAL)
|| (state->state == TCP_CONNTRACK_SYN_RECV
&& dir == IP_CT_DIR_REPLY))
&& after(end, sender->td_end)) {
... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY.
This causes the scaling factor to be reset to 0: window scale option
is only present in syn(ack) packets. This in turn makes nf_conntrack
mark valid packets as out-of-window.
This was always broken, it exists even in original commit where
window tracking was added to ip_conntrack (nf_conntrack predecessor)
in 2.6.9-rc1 kernel.
Restrict to 'tcph->syn', just like the 3rd condtional added in
commit 82b72cb94666 ("netfilter: conntrack: re-init state for retransmitted syn-ack").
Upon closer look, those conditionals/branches can be merged:
Because earlier checks prevent syn-ack from showing up in
original direction, the 'dir' checks in the conditional quoted above are
redundant, remove them. Return early for pure syn retransmitted in reply
direction (simultaneous open).
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Changes to the "warn" mode of split lock handling mean that TIF_SLD is
never set.
Remove the bit, and the functions that use it.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-3-tony.luck@intel.com
|
|
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas
said:
Its's simply wishful thinking that stuff gets fixed because of a
WARN_ONCE(). This has never worked. The only thing which works is to
make stuff fail hard or slow it down in a way which makes it annoying
enough to users to complain.
He was talking about WBINVD. But it made me think about how we use the
split lock detection feature in Linux.
Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process
keep running with split lock detection disabled
3) Kill process that use split locks
Option 2 falls into the "wishful thinking" territory that Thomas warns does
nothing. But option 3 might not be viable in a situation with legacy
applications that need to run.
Hence make option 2 much stricter to "slow it down in a way which makes
it annoying".
Primary reason for this change is to provide better quality of service to
the rest of the applications running on the system. Internal testing shows
that even with many processes splitting locks, performance for the rest of
the system is much more responsive.
The new "warn" mode operates like this. When an application tries to
execute a bus lock the #AC handler.
1) Delays (interruptibly) 10 ms before moving to next step.
2) Blocks (interruptibly) until it can get the semaphore
If interrupted, just return. Assume the signal will either
kill the task, or direct execution away from the instruction
that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns
The work queue that re-enables split lock detection also releases the
semaphore.
There is a corner case where a CPU may be taken offline while split lock
detection is disabled. A CPU hotplug handler handles this case.
Old behaviour was to only print the split lock warning on the first
occurrence of a split lock from a task. Preserve that by adding a flag to
the task structure that suppresses subsequent split lock messages from that
task.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-2-tony.luck@intel.com
|
|
We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:
BUG: kernel NULL pointer dereference, address: 0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246
Add NULL pointer check for sof_dev_desc pointer to avoid such exception.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since
e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
kmemleak reports this issue:
unreferenced object 0xffff888009cedc00 (size 256):
comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
msr_build_context (include/linux/slab.h:621)
pm_check_save_msr (arch/x86/power/cpu.c:520)
do_one_initcall (init/main.c:1298)
kernel_init_freeable (init/main.c:1370)
kernel_init (init/main.c:1504)
ret_from_fork (arch/x86/entry/entry_64.S:304)
Reproducer:
- boot the VM with a debug kernel config (see
https://github.com/multipath-tcp/mptcp_net-next/issues/268)
- wait ~1 minute
- start a kmemleak scan
The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:
struct saved_context {
struct pt_regs regs; /* 0 168 */
/* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
u16 ds; /* 168 2 */
...
u64 misc_enable; /* 232 8 */
bool misc_enable_saved; /* 240 1 */
/* Note below odd offset values for the remainder of this struct */
struct saved_msrs saved_msrs; /* 241 16 */
/* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
long unsigned int efer; /* 257 8 */
u16 gdt_pad; /* 265 2 */
struct desc_ptr gdt_desc; /* 267 10 */
u16 idt_pad; /* 277 2 */
struct desc_ptr idt; /* 279 10 */
u16 ldt; /* 289 2 */
u16 tss; /* 291 2 */
long unsigned int tr; /* 293 8 */
long unsigned int safety; /* 301 8 */
long unsigned int return_address; /* 309 8 */
/* size: 317, cachelines: 5, members: 25 */
/* last cacheline: 61 bytes */
} __attribute__((__packed__));
Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.
The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.
At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.
Please note that it looks like this issue is not new, e.g.
https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/
https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/
[ bp: Massage + cleanup commit message. ]
Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
|
|
CLEAR_FAULTS commands can apparently sometimes trigger catastrophic
power output glitches on the ahe-50dc, so block them from being sent
at all.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220427035109.3819-1-zev@bewilderbeest.net
Fixes: d387d88ed045 ("hwmon: (pmbus) Add Delta AHE-50DC fan control module driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The GHCB specification section 2.7 states that when SEV-SNP is enabled,
a guest should not rely on the hypervisor to provide the address of the
AP jump table. Instead, if a guest BIOS wants to provide an AP jump
table, it should record the address in the SNP secrets page so the guest
operating system can obtain it directly from there.
Fix this on the guest kernel side by having SNP guests use the AP jump
table address published in the secrets page rather than issuing a GHCB
request to get it.
[ mroth:
- Improve error handling when ioremap()/memremap() return NULL
- Don't mix function calls with declarations
- Add missing __init
- Tweak commit message ]
Fixes: 0afb6b660a6b ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
|
|
Currently, get_secrets_page() is only reachable from the following call
chain:
__init snp_init_platform_device():
get_secrets_page()
so mark it as __init as well. This is also needed since it calls
early_memremap(), which is also an __init routine.
Similarly, get_jump_table_addr() is only reachable from the following
call chain:
__init setup_real_mode():
sme_sev_setup_real_mode():
sev_es_setup_ap_jump_table():
get_jump_table_addr()
so mark get_jump_table_addr() and everything up that call chain as
__init as well. This is also needed since future patches will add a
call to get_secrets_page(), which needs to be __init due to the reasons
stated above.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-2-michael.roth@amd.com
|
|
Rename the drivers/virt/coco/sevguest directory and files to sev-guest
so as to match the driver name.
[ bp: Rename Documentation/virt/coco/sevguest.rst too, as reported by sfr:
https://lore.kernel.org/r/20220427101059.3bf55262@canb.auug.org.au ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/2f5c9cb16e3a67599c8e3170f6c72c8712c47d53.1650464054.git.thomas.lendacky@amd.com
|
|
As demonstrated by commit 74bdf7815dfb ("genirq: Speedup
show_interrupts()"), irq_desc can be accessed safely in RCU read section.
Hence here resorting to rcu read lock to get rid of irq_lock_sparse().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Link: https://lore.kernel.org/r/20220422100212.22666-1-kernelfans@gmail.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
gcc-12 shows a lot of array bound warnings on s390. This is caused
by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows
that a 12 bit displacement is sufficient to access lowcore. So it
emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a
single load/store instruction. As s390 stores variables often
read/written in lowcore, this is considered problematic. Therefore
disable -Warray-bounds on s390 for gcc-12 for the time being, until
there is a better solution.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com
Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com
Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-26
This series contains updates to ice driver only.
Ivan Vecera removes races related to VF message processing by changing
mutex_trylock() call to mutex_lock() and moving additional operations
to occur under mutex.
Petr Oros increases wait time after firmware flash as current time is
not sufficient.
Jake resolves a use-after-free issue for mailbox snapshot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Writing volatile registers are instant according to Micron and do not
need any status polling. Remove status polling on volatile registers write.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-12-tudor.ambarus@microchip.com
|
|
Writing volatile registers are instant according to Cypress and do not
need any status polling. Remove status polling on volatile registers write.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-11-tudor.ambarus@microchip.com
|
|
Clean the op declaration and hide the details of each op. With this it
results a cleanner, easier to read code. No functional change expected.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Acked-by: Michael Walle <michael@walle.cc>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220420103427.47867-10-tudor.ambarus@microchip.com
|
|
Introduce template operation to remove code duplication.
Split spi_nor_cypress_octal_dtr_enable() in
spi_nor_cypress_octal_dtr_ena() spi_nor_cypress_octal_dtr_dis() as it no
longer made sense to try to keep everything alltogether: too many
"if (enable)" throughout the code, which made the code difficult to read.
Add debug messages in case spi_nor_read_id() fails.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-9-tudor.ambarus@microchip.com
|
|
Introduce template operation to remove code duplication.
Split spi_nor_micron_octal_dtr_enable() in spi_nor_micron_octal_dtr_en()
and spi_nor_micron_octal_dtr_dis() as it no longer made sense to try to
keep everything alltogether: too many "if (enable)" throughout the code,
which made the code difficult to follow. Add dev_dbg messages in case
spi_nor_read_id() fails.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-8-tudor.ambarus@microchip.com
|
|
There are manufacturers that use registers indexed by address. Some of
them support "read/write any register" opcodes. Provide core methods that
can be used by all manufacturers. SPI NOR controller ops are intentionally
not supported as we intend to move all the SPI NOR controller drivers
under the SPI subsystem.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-7-tudor.ambarus@microchip.com
|
