summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-16arm64/sme: Drop SYS_ from SMIDR_EL1 definesMark Brown
We currently have a non-standard SYS_ prefix in the constants generated for SMIDR_EL1 bitfields. Drop this in preparation for automatic register definition generation, no functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220510161208.631259-4-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64/fp: Rename SVE and SME LEN field name to _WIDTHMark Brown
The SVE and SVE length configuration field LEN have constants specifying their width called _SIZE rather than the more normal _WIDTH, in preparation for automatic generation rename to _WIDTH. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220510161208.631259-3-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64/fp: Make SVE and SME length register definition match architectureMark Brown
Currently (as of DDI0487H.a) the architecture defines the vector length control field in ZCR and SMCR as being 4 bits wide with an additional 5 bits reserved above it marked as RAZ/WI for future expansion. The kernel currently attempts to anticipate such expansion by treating these extra bits as part of the LEN field but this will be inconvenient when we start generating the defines and would cause problems in the event that the architecture goes a different direction with these fields. Let's instead change the defines to reflect the currently defined architecture, we can update in future as needed. No change in behaviour should be seen in any system, even emulated systems using the maximum allowed vector length for the current architecture. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220510161208.631259-2-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16Merge branch 'for-next/sme' into for-next/sysreg-genCatalin Marinas
* for-next/sme: (29 commits) : Scalable Matrix Extensions support. arm64/sve: Make kernel FPU protection RT friendly arm64/sve: Delay freeing memory in fpsimd_flush_thread() arm64/sme: More sensibly define the size for the ZA register set arm64/sme: Fix NULL check after kzalloc arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding() arm64/sme: Provide Kconfig for SME KVM: arm64: Handle SME host state when running guests KVM: arm64: Trap SME usage in guest KVM: arm64: Hide SME system registers from guests arm64/sme: Save and restore streaming mode over EFI runtime calls arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Add ptrace support for ZA arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Implement ZA signal handling arm64/sme: Implement streaming SVE signal handling arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement traps and syscall handling for SME arm64/sme: Implement ZA context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement SVCR context switching ...
2022-05-16kselftest/arm64: Explicitly build no BTI tests with BTI disabledMark Brown
In case a distribution enables branch protection by default do as we do for the main kernel and explicitly disable branch protection when building the test case for having BTI disabled to ensure it doesn't get turned on by the toolchain defaults. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220516182213.727589-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64/sve: Make kernel FPU protection RT friendlySebastian Andrzej Siewior
Non RT kernels need to protect FPU against preemption and bottom half processing. This is achieved by disabling bottom halves via local_bh_disable() which implictly disables preemption. On RT kernels this protection mechanism is not sufficient because local_bh_disable() does not disable preemption. It serializes bottom half related processing via a CPU local lock. As bottom halves are running always in thread context on RT kernels disabling preemption is the proper choice as it implicitly prevents bottom half processing. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220505163207.85751-3-bigeasy@linutronix.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64/sve: Delay freeing memory in fpsimd_flush_thread()Sebastian Andrzej Siewior
fpsimd_flush_thread() invokes kfree() via sve_free()+sme_free() within a preempt disabled section which is not working on -RT. Delay freeing of memory until preemption is enabled again. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220505163207.85751-2-bigeasy@linutronix.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64: mm: Make arch_faults_on_old_pte() check for migratabilityValentin Schneider
arch_faults_on_old_pte() relies on the calling context being non-preemptible. CONFIG_PREEMPT_RT turns the PTE lock into a sleepable spinlock, which doesn't disable preemption once acquired, triggering the warning in arch_faults_on_old_pte(). It does however disable migration, ensuring the task remains on the same CPU during the entirety of the critical section, making the read of cpu_has_hw_af() safe and stable. Make arch_faults_on_old_pte() check cant_migrate() instead of preemptible(). Cc: Valentin Schneider <vschneid@redhat.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20220127192437.1192957-1-valentin.schneider@arm.com Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220505163207.85751-4-bigeasy@linutronix.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16arm64: mte: Clean up user tag accessorsRobin Murphy
Invoking user_ldst to explicitly add a post-increment of 0 is silly. Just use a normal USER() annotation and save the redundant instruction. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tong Tiangen <tongtiangen@huawei.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220420030418.3189040-6-tongtiangen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16kselftest/arm64: bti: force static linkingAndre Przywara
The "bti" selftests are built with -nostdlib, which apparently automatically creates a statically linked binary, which is what we want and need for BTI (to avoid interactions with the dynamic linker). However this is not true when building a PIE binary, which some toolchains (Ubuntu) configure as the default. When compiling btitest with such a toolchain, it will create a dynamically linked binary, which will probably fail some tests, as the dynamic linker might not support BTI: =================== TAP version 13 1..18 not ok 1 nohint_func/call_using_br_x0 not ok 2 nohint_func/call_using_br_x16 not ok 3 nohint_func/call_using_blr .... =================== To make sure we create static binaries, add an explicit -static on the linker command line. This forces static linking even if the toolchain defaults to PIE builds, and fixes btitest runs on BTI enabled machines. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Fixes: 314bcbf09f14 ("kselftest: arm64: Add BTI tests") Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-16block, bfq: make bfq_has_work() more accurateYu Kuai
bfq_has_work() is using busy_queues currently, which is not accurate because bfq_queue is busy doesn't represent that it has requests. Since bfqd aready has a counter 'queued' to record how many requests are in bfq, use it instead of busy_queues. Noted that bfq_has_work() can be called with 'bfqd->lock' held, thus the lock can't be held in bfq_has_work() to protect 'bfqd->queued'. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220513023507.2625717-3-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16block, bfq: protect 'bfqd->queued' by 'bfqd->lock'Yu Kuai
If bfq_schedule_dispatch() is called from bfq_idle_slice_timer_body(), then 'bfqd->queued' is read without holding 'bfqd->lock'. This is wrong since it can be wrote concurrently. Fix the problem by holding 'bfqd->lock' in such case. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220513023507.2625717-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16block: cleanup the VM accounting in submit_bioChristoph Hellwig
submit_bio uses some extremely convoluted checks and confusing comments to only account REQ_OP_READ/REQ_OP_WRITE comments. Just switch to the plain obvious checks instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220516063654.2782792-1-hch@lst.de [axboe: fixup WRITE -> REQ_OP_WRITE] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16dt-bindings: mtd: partitions: Extend fixed-partitions bindingMikhail Zhilkin
Extend fixed-partitions binding for support of Sercomm partition parser (add "sercomm,sc-partitions" compatible). Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220516151725.885427-1-csharper2005@gmail.com
2022-05-16dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefixMikhail Zhilkin
Add "sercomm" vendor prefix for "Sercomm (Suzhou) Corporation". Company website: Link: https://www.sercomm.com/ Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220516151637.885324-1-csharper2005@gmail.com
2022-05-16mtd: phram: Allow cached mappingsVincent Whitchurch
Currently phram always uses ioremap(), but this is unnecessary when normal memory is used. If the reserved-memory node does not specify the no-map property, indicating it should be mapped as system RAM and ioremap() cannot be used on it, use a cached mapping using memremap(MEMREMAP_WB) instead. On one of my systems this improves read performance by ~70%. (Note that this driver has always used normal memcpy/memset functions on memory obtained from ioremap(), which sparse doesn't like. There is no memremap() variant which maps exactly to ioremap() on all architectures, so that behaviour of the driver is not changed to avoid affecting existing users, but the sparse warnings are suppressed in the moved code with __force.) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220510151822.1809278-1-vincent.whitchurch@axis.com
2022-05-16mtd: call of_platform_populate() for MTD partitionsRafał Miłecki
Until this change MTD subsystem supported handling partitions only with MTD partitions parsers. That's a specific / limited API designed around partitions. Some MTD partitions may however require different handling. They may contain specific data that needs to be parsed and somehow extracted. For that purpose MTD subsystem should allow binding of standard platform drivers. An example can be U-Boot (sub)partition with environment variables. There exist a "u-boot,env" DT binding for MTD (sub)partition that requires an NVMEM driver. Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220510131259.555-1-zajec5@gmail.com
2022-05-16mtd: rawnand: renesas: Use runtime PM instead of the raw clock APIMiquel Raynal
This NAND controller is part of a well defined power domain handled by the runtime PM core. Let's keep the harmony with the other RZ/N1 drivers and exclusively use the runtime PM API to enable/disable the clocks. We still need to retrieve the external clock rate in order to derive the NAND timings, but that is not a big deal, we can still do that in the probe and just save this value to reuse it later. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/linux-mtd/20220513104957.257721-3-miquel.raynal@bootlin.com
2022-05-16dt-bindings: mtd: renesas: Fix the NAND controller descriptionMiquel Raynal
Add the missing power-domain property which is needed on all the RZ/N1 SoC IPs. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220513104957.257721-2-miquel.raynal@bootlin.com
2022-05-16mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not neededPhil Edworthy
All code in clk_disable_unprepare() already checks the clk ptr using IS_ERR_OR_NULL so there is no need to check it again before calling it. A lot of other drivers already rely on this behaviour, so it's safe to do so here. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220512185033.46901-1-phil.edworthy@renesas.com
2022-05-16mtd: rawnand: rockchip: Check before clk_disable_unprepare() not neededPhil Edworthy
All code in clk_disable_unprepare() already checks the clk ptr using IS_ERR_OR_NULL so there is no need to check it again before calling it. A lot of other drivers already rely on this behaviour, so it's safe to do so here. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220512184558.45966-1-phil.edworthy@renesas.com
2022-05-16mmc: sdhci-of-arasan: Add NULL check for data fieldSai Krishna Potthuri
Add NULL check for data field retrieved from of_device_get_match_data() before dereferencing the data. Addresses-coverity: CID 305057:Dereference null return value (NULL_RETURNS) Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1652339993-27280-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-05-16nbd: Fix hung on disconnect request if socket is closed beforeXie Yongji
When userspace closes the socket before sending a disconnect request, the following I/O requests will be blocked in wait_for_reconnect() until dead timeout. This will cause the following disconnect request also hung on blk_mq_quiesce_queue(). That means we have no way to disconnect a nbd device if there are some I/O requests waiting for reconnecting until dead timeout. It's not expected. So let's wake up the thread waiting for reconnecting directly when a disconnect request is sent. Reported-by: Xu Jianhai <zero.xu@bytedance.com> Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16evm: Clean up some variablesStefan Berger
Make hmac_tfm static since it's not used anywhere else besides the file it is in. Remove declaration of hash_tfm since it doesn't exist. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-05-16evm: Return INTEGRITY_PASS for enum integrity_status value '0'Stefan Berger
Return INTEGRITY_PASS for the enum integrity_status rather than 0. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2022-05-16ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepareWan Jiabing
ERROR check is already in clk_disable() and clk_unprepare() by using IS_ERR_OR_NULL. Remove unneeded ERROR check for ftide->pclk here. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-05-16netfilter: nft_flow_offload: fix offload with pppoe + vlanFelix Fietkau
When running a combination of PPPoE on top of a VLAN, we need to set info->outdev to the PPPoE device, otherwise PPPoE encap is skipped during software offload. Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-16net: fix dev_fill_forward_path with pppoe + bridgeFelix Fietkau
When calling dev_fill_forward_path on a pppoe device, the provided destination address is invalid. In order for the bridge fdb lookup to succeed, the pppoe code needs to update ctx->daddr to the correct value. Fix this by storing the address inside struct net_device_path_ctx Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-16netfilter: nft_flow_offload: skip dst neigh lookup for ppp devicesFelix Fietkau
The dst entry does not contain a valid hardware address, so skip the lookup in order to avoid running into errors here. The proper hardware address is filled in from nft_dev_path_info Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-16netfilter: flowtable: fix excessive hw offload attempts after failureFelix Fietkau
If a flow cannot be offloaded, the code currently repeatedly tries again as quickly as possible, which can significantly increase system load. Fix this by limiting flow timeout update and hardware offload retry to once per second. Fixes: c07531c01d82 ("netfilter: flowtable: Remove redundant hw refresh bit") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-05-16net/sched: act_pedit: sanitize shift argument before usagePaolo Abeni
syzbot was able to trigger an Out-of-Bound on the pedit action: UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43 shift exponent 1400735974 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x50 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322 tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238 tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367 tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432 tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956 tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe36e9e1b59 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The 'shift' field is not validated, and any value above 31 will trigger out-of-bounds. The issue predates the git history, but syzbot was able to trigger it only after the commit mentioned in the fixes tag, and this change only applies on top of such commit. Address the issue bounding the 'shift' value to the maximum allowed by the relevant operator. Reported-and-tested-by: syzbot+8ed8fc4c57e9dcf23ca6@syzkaller.appspotmail.com Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16ALSA: usb-audio: Restore Rane SL-1 quirkTakashi Iwai
At cleaning up and moving the device rename from the quirk table to its own table, we removed the entry for Rane SL-1 as we thought it's only for renaming. It turned out, however, that the quirk is required for matching with the device that declares itself as no standard audio but only as vendor-specific. Restore the quirk entry for Rane SL-1 to fix the regression. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887 Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-16s390/cpumf: add new extended counter set for IBM z16Thomas Richter
Export the extended counter set counters of the IBM z16 via sysfs. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-16Merge tag 'linux-can-fixes-for-5.18-20220514' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-05-14 this is a pull request of 2 patches for net/master. Changes to linux-can-fixes-for-5.18-20220513: - adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"" (Thanks Jakub) Both patches are by Jarkko Nikula, target the m_can PCI driver bindings, and fix usage of wrong bit timing constants for the Elkhart Lake platform. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16m68k: math-emu: Fix dependencies of math emulation supportGeert Uytterhoeven
If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y: {standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored {standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,#8},%d0' ignored {standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored {standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored The math emulation support code is intended for 68020 and higher, and uses several instructions or instruction modes not available on coldfire or 68000. Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU support was only available on 68020 or higher. But this assumption was broken by the introduction of MMU support for M547x and M548x. Drop the dependency on MMU, as the code should work fine on 68020 and up without MMU (which are not yet supported by Linux, though). Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel has some type of floating-point support --- be it hardware or software emulated, to rule out anything below 68020). Fixes: 1f7034b9616e6f14 ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.1652446117.git.geert@linux-m68k.org
2022-05-16ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machineAndy Chi
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Andy Chi <andy.chi@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-16xfrm: fix "disable_policy" flag use when arriving from different devicesEyal Birger
In IPv4 setting the "disable_policy" flag on a device means no policy should be enforced for traffic originating from the device. This was implemented by seting the DST_NOPOLICY flag in the dst based on the originating device. However, dsts are cached in nexthops regardless of the originating devices, in which case, the DST_NOPOLICY flag value may be incorrect. Consider the following setup: +------------------------------+ | ROUTER | +-------------+ | +-----------------+ | | ipsec src |----|-|ipsec0 | | +-------------+ | |disable_policy=0 | +----+ | | +-----------------+ |eth1|-|----- +-------------+ | +-----------------+ +----+ | | noipsec src |----|-|eth0 | | +-------------+ | |disable_policy=1 | | | +-----------------+ | +------------------------------+ Where ROUTER has a default route towards eth1. dst entries for traffic arriving from eth0 would have DST_NOPOLICY and would be cached and therefore can be reused by traffic originating from ipsec0, skipping policy check. Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead of the DST in IN/FWD IPv4 policy checks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-16i915/guc/reset: Make __guc_reset_context aware of guilty enginesUmesh Nerlige Ramappa
There are 2 ways an engine can get reset in i915 and the method of reset affects how KMD labels a context as guilty/innocent. (1) GuC initiated engine-reset: GuC resets a hung engine and notifies KMD. The context that hung on the engine is marked guilty and all other contexts are innocent. The innocent contexts are resubmitted. (2) GT based reset: When an engine heartbeat fails to tick, KMD initiates a gt/chip reset. All active contexts are marked as guilty and discarded. In order to correctly mark the contexts as guilty/innocent, pass a mask of engines that were reset to __guc_reset_context. Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 303760aa914b7f5ac9602dbb4b471a2ad52eeb3e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-05-16drm/i915/dmc: Add MMIO range restrictionsAnusha Srivatsa
Bspec has added some steps that check forDMC MMIO range before programming them v2: Fix for CI v3: move register defines to .h (Anusha) - Check MMIO restrictions per pipe - Add MMIO restricton for v1 dmc header as well (Lucas) v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario. - clean up sanity check logic.(Lucas) - Add MMIO range for RKL as well.(Anusha) v5: Use DISPLAY_VER instead of per platform check (Lucas) BSpec: 49193 Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com (cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-05-16nvme-fabrics: add a request timeout helperChaitanya Kulkarni
The RDAMA and TCP transport both complete the timed out request in the same manner and hence code is duplicated. Add and use the helper nvmf_complete_timed_out_request() to remove the duplicate code. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme-pci: harden drive presence detect in nvme_dev_disable()Stefan Roese
On our ZynqMP system we observe, that a NVMe drive that resets itself while doing a firmware update causes a Kernel crash like this: [ 67.720772] pcieport 0000:02:02.0: pciehp: Slot(2): Link Down [ 67.720783] pcieport 0000:02:02.0: pciehp: Slot(2): Card not present [ 67.720795] nvme 0000:04:00.0: PME# disabled [ 67.720849] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 67.720853] nwl-pcie fd0e0000.pcie: Slave error Analysis: When nvme_dev_disable() is called because of this PCIe hotplug event, pci_is_enabled() is still true. And accessing the NVMe drive which is currently not available as it's in reboot process causes this "synchronous external abort" on this ARM64 platform. This patch adds the pci_device_is_present() check as well, which returns false in this "Card not present" hot-plug case. With this change, the NVMe driver does not try to access the NVMe registers any more and the FW update finishes without any problems. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tagsSmith, Kyle Miller (Nimble Kernel)
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]). Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference. Signed-off-by: Kyle Smith <kyles@hpe.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: mark internal passthru request RQF_QUIETChaitanya Kulkarni
Most of the internal passthru commands use __nvme_submit_sync_cmd() interface. There are few places we open code the request submission :- 1. nvme_keep_alive_work(struct work_struct *work) 2. nvme_timeout(struct request *req, bool reserved) 3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode) Mark the internal passthru request quiet so that we can skip the verbose error message from nvme_log_error() in nvme_end_req() completion path, this will be consistent with what we have in __nvme_submit_sync_cmd(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: remove unneeded include from constants fileMax Gurtovoy
No usage of blkdev.h elements. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: add missing status values to verbose loggingMax Gurtovoy
Log a few more path related status codes. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: set dma alignment to dwordKeith Busch
The nvme specification only requires qword alignment for segment descriptors, and the driver already guarantees that. The spec has always allowed user data to be dword aligned, which is what the queue's attribute is for, so relax the alignment requirement to that value. While we could allow byte alignment for some controllers when using SGLs, we still need to support PRP, and that only allows dword. Fixes: 3b2a1ebceba3 ("nvme: set dma alignment to qword") Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: fix interpretation of DMRSLTom Yan
DMRSLl is in the unit of logical blocks, while max_discard_sectors is in the unit of "linux sector". Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-15Linux 5.18-rc7v5.18-rc7Linus Torvalds
2022-05-15cdrom: remove obsolete TODO listPhillip Potter
The TODO list in drivers/cdrom/cdrom.c has a single entry containing obsolete information, unchanged since the first git commit over 17 years ago, and probably longer. Remove this list from the comment to prevent confusion in future. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220515205833.944139-6-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-15block: remove last remaining traces of IDE documentationPaul Gortmaker
The last traces of the IDE driver went away in commit b7fb14d3ac63 ("ide: remove the legacy ide driver") but it left behind some traces of old documentation. As luck would have it Randy and I would submit similar changes within a week of each other to address this. As Randy's commit is in the doc tree already - this delta is just the stuff my removal contained that was not in Randy's IDE doc removal. Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: https://lore.kernel.org/all/20220427165917.GE12977@windriver.com [phil@philpotter.co.uk: removed diffs already added by others] Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20220515205833.944139-5-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-12 23:56:03 +0000