| Age | Commit message (Collapse) | Author |
|---|
|
The commit dfa0a574cbc47 ("sched/uclamg: Handle delayed dequeue")
has add the sched_delayed check to prevent double uclamp_dec/inc.
However, it put the uclamp_rq_inc() after enqueue_task().
This may lead to the following issues:
When a task with uclamp goes through enqueue_task() and could trigger
cpufreq update, its uclamp won't even be considered in the cpufreq
update. It is only after enqueue will the uclamp be added to rq
buckets, and cpufreq will only pick it up at the next update.
This could cause a delay in frequency updating. It may affect
the performance(uclamp_min > 0) or power(uclamp_max < 1024).
So, just like util_est, put the uclamp_rq_inc() before enqueue_task().
And as for the sched_delayed_task, same as util_est, using the
sched_delayed flag to prevent inc the sched_delayed_task's uclamp,
using the ENQUEUE_DELAYED flag to allow inc the sched_delayed_task's uclamp
which is being woken up.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250417043457.10632-3-xuewen.yan@unisoc.com
|
|
To prevent double enqueue/dequeue of the util-est for sched_delayed tasks,
commit 729288bc6856 ("kernel/sched: Fix util_est accounting for DELAY_DEQUEUE")
added the corresponding check. This check excludes double en/dequeue during
task migration and priority changes.
In fact, these conditions can be simplified.
For util_est_dequeue, we know that sched_delayed flag is set in dequeue_entity.
When the task is sleeping, we need to call util_est_dequeue to subtract
util-est from the cfs_rq. At this point, sched_delayed has not yet been set.
If we find that sched_delayed is already set, it indicates that this task
has already called dequeue_task_fair once. In this case, there is no need to
call util_est_dequeue again. Therefore, simply checking the sched_delayed flag
should be sufficient to prevent unnecessary util_est updates during the dequeue.
For util_est_enqueue, our goal is to add the util_est to the cfs_rq
when task enqueue. However, we don't want to add the util_est of a
sched_delayed task to the cfs_rq because the task is sleeping.
Therefore, we can exclude the util_est_enqueue for sched_delayed tasks
by checking the sched_delayed flag. However, when waking up a delayed task,
the sched_delayed flag is cleared after util_est_enqueue. As a result,
if we only check the sched_delayed flag, we would miss the util_est_enqueue.
Since waking up a sched_delayed task calls enqueue_task with the ENQUEUE_DELAYED flag,
we can determine whether to call util_est_enqueue by checking if the
enqueue_flag contains ENQUEUE_DELAYED.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250417043457.10632-2-xuewen.yan@unisoc.com
|
|
Delayed dequeued feature keeps a sleeping task enqueued until its
lag has elapsed. As a result, it stays also visible in rq->nr_running.
So when in wake_affine_idle(), we should use the real running-tasks
in rq to check whether we should place the wake-up task to
current cpu.
On the other hand, add a helper function to return the nr-delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250303105241.17251-2-xuewen.yan@unisoc.com
|
|
Remove all unnecessary braces for single-statement blocks in
`os_dep/recv_linux.c` to conform to code style rules.
Warnings reported by checkpatch.pl:
* WARNING: braces {} are not necessary for single statement blocks
* WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Link: https://lore.kernel.org/r/20250521075831.485199-1-davidbtadokoro@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed multiple blank lines in file rtw_pwrctrl.c
Found by checkpatch.pl
Signed-off-by: Rogério Fernandes Pereira <rfp2005@gmail.com>
Link: https://lore.kernel.org/r/20250503202430.6053-1-rfp2005@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750le_setBLANK` to `hw_sm750le_set_blank` to conform with
kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750le_setBLANK>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/b49d1a00628a3475fdfbff4055d8347d35a802a9.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_setBLANK` to `hw_sm750_set_blank` to conform with
kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_setBLANK>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/e00a39ffba89e000fdf8dc277166297d995aa891.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_setColReg` to `hw_sm750_set_col_reg` to conform with
kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_setColReg>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/3d4bb87742eee4a6792bbdae893256f621ffffe6.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_crtc_setMode` to `hw_sm750_crtc_set_mode` to conform
with kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_crtc_setMode>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/40d4a1f5b05bcb0eefdd787b9df329fceb96105e.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_crtc_checkMode` to `hw_sm750_crtc_check_mode` to
conform with kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_crtc_checkMode>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/546e9abb8eac1be75f47b51460ab69a5736d8a99.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_output_setMode` to `hw_sm750_output_set_mode` to
conform with kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_output_setMode>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/32daa589cf80d2f6f67ed257aa9397128a5458d2.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750le_deWait` to `hw_sm750le_de_wait` to conform with
kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750le_deWait>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/0e5332f7758ad24cc5bca36671fd811c87881db7.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_deWait` to `hw_sm750_de_wait` to conform with kernel
style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_deWait>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/2d94a42ca51de9fddddb64f74e217dfb2e0c7d1c.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename `hw_sm750_initAccel` to `hw_sm750_init_accel` to conform with
kernel style guidelines as reported by checkpatch.pl
CHECK: Avoid CamelCase: <hw_sm750_initAccel>
Signed-off-by: Eric Florin <ericflorin@google.com>
Link: https://lore.kernel.org/r/3c84dccaf38161d6de6ff560d4f10bb3d344cc51.1747619816.git.ericflorin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch warning:
Prefer kmalloc(sizeof(*status)...) over
kmalloc(sizeof(struct gpib_status_byte)...)
Signed-off-by: Andreas Kleinbichler <andi.kleinbichler@gmail.com>
Link: https://lore.kernel.org/r/aCdY-OgvoTUjcIeF@andreas-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GPIB secondary addresses have valid values between 0 and 31
inclusive. The Make Secondary Address function MSA, used to form
the protocol byte, was using the gpib_address_restrict function
erroneously restricting the address range to 0 through 30.
Remove the call to gpib_address_restrict and simply trim the
address to 5 bits.
Fixes: 2da03e7e31aa ("staging: gpib: Add user api include files")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250520155100.5808-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When gpib_user.h was renamed to gpio.h the include guard name was
not changed accordingly.
Change the include guard name to correspond with the file name
and cleanup the comments after the #endif.
Fixes: c7184cbf5530 ("staging: gpib: Rename common include file")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250509113014.9105-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This addresses a warning produced by make W=1 with the configuration
parameter CONFIG_GPIB_PCMCIA=y
ines/ines_gpib.c:1115:28: warning: variable 'dev' set but not used [-Wunused-but-set-variable]
Remove the declaration and assignment of the unused variable.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many of this driver's entry points were unecessarily not declared
static.
Remove the declarations from the include file.
Make the declarations static in the .c file.
Remove an uneccessary forward declaration in the .c file.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PCMCIA config identifier in the ines_exit_module function
was never changed because it was misspelled in the original commit.
Update the config parameter to use the correct identifier from
gpib/Kconfig
Fixes: bb1bd92fa0f2 ("staging: gpib: Add ines GPIB driver")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The console dimension and cursor position are available through the
/dev/vcsa interface already. However the /dev/vcsa header format uses
single-byte fields therefore those values are clamped to 255.
As surprizing as this may seem, some people do use 240-column 67-row
screens (a 1920x1080 monitor with 8x16 pixel fonts) which is getting
close to the limit. Monitors with higher resolution are not uncommon
these days (3840x2160 producing a 480x135 character display) and it is
just a matter of time before someone with, say, a braille display using
the Linux VT console and BRLTTY on such a screen reports a bug about
missing and oddly misaligned screen content.
Let's add VT_GETCONSIZECSRPOS for the retrieval of console size and cursor
position without byte-sized limitations. The actual console size limit as
encoded in vt.c is 32767x32767 so using a short here is appropriate. Then
this can be used to get the cursor position when /dev/vcsa reports 255.
The screen dimension may already be obtained using TIOCGWINSZ and adding
the same information to VT_GETCONSIZECSRPOS might be redundant. However
applications that care about cursor position also care about display
size and having 2 separate system calls to obtain them separately is
wasteful. Also, the cursor position can be queried by writing "\e[6n" to
a tty and reading back the result but that may be done only by the actual
application using that tty and not a sideline observer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250520171851.1219676-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is comprised of 3 aspects:
- Take note of when applications advertise bracketed paste support via
"\e[?2004h" and "\e[?2004l".
- Insert bracketed paste markers ("\e[200~" and "\e[201~") around pasted
content in paste_selection() when bracketed paste is active.
- Add TIOCL_GETBRACKETEDPASTE to return bracketed paste status so user
space daemons implementing cut-and-paste functionality (e.g. gpm,
BRLTTY) may know when to insert bracketed paste markers.
Link: https://en.wikipedia.org/wiki/Bracketed-paste
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520171851.1219676-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
They are listed amon those cmd values that "treat 'arg' as an integer"
which is wrong. They should instead fall into the default case. Probably
nobody ever relied on that code since 2009 but still.
Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This shaves about 170 bytes from ucs.o.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-9-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Attempt to display a fallback character when given character doesn't
have an available glyph. The substitution may not be as good as the
original character but still way more helpful than a squared question
mark.
Example substitutions: À -> A, ç -> c, ø -> o, ─ -> -, © -> C, etc.
See gen_ucs_fallback_table.py for a comprehensive list.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-8-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the code querying the newly introduced tables.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-7-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
A page-based approach is used to reduce compiled binary footprint.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-6-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The generated table maps complex characters to their simpler fallback
forms for a terminal display when corresponding glyphs are unavailable.
This includes diacritics, symbols as well as many drawing characters.
Fallback characters aren't perfect replacements, obviously. But they are
still far more useful than a bunch of squared question marks.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-5-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No logical changes. Make it easier for enhancements to come.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-4-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
And to do so we ensure the Unicode screen buffer is initialized when
double-width characters are encountered.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250507141535.40655-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The in_range() helper accepts a start and a length, not a start and
an end.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250507141535.40655-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor parity calculations to use the standard parity8() helper.
This change eliminates redundant implementations.
Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250515081311.775559-1-visitorckw@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binding references in-kernel serial.yaml, so there is no need to
explicitly list its properties. Note that rts-gpio is also redundant
because DTS should be simply converted to -gpios variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250514125127.56149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Socionext Milbeaut UART binding to DT schema. It is a
straight-forward conversion.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154924.1602842-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Microchip PIC32 UART binding to DT schema. The binding was
unclear there are 3 interrupts. The functions were determined from the
driver. The 'cts-gpios' property is covered by serial.yaml schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154937.1603190-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm SBSA UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250506220016.2545637-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Synopsys ARC UART binding to DT schema. Drop the "aliases"
portion which is not relevant to this schema.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154909.1602497-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Marvell Armada-3700 UART binding to DT schema. It is a
straight-forward conversion.
Drop the long deprecated single interrupt support.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Lantiq SoC ASC UART binding to DT schema. There are no such
clock identifier defines nor a user with clocks, so drop the example
with clocks.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220029.2546179-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Cirrus EP7209 UART binding to DT schema. There is no user of
"cirrus,ep7312-uart" other than the example, so drop it. Drop the
"aliases" node part as it is not relevant to the schema. The modem
control GPIOs are covered by the serial.yaml schema and don't have to be
listed in the schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220021.2545820-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm MPS2 UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250506220012.2545470-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the NXP LPC3220 HS UART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20250506220048.2546915-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Conexant Digicolor USART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20250506220025.2545995-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No device was set which caused serial_base_ctrl_add to crash.
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1
RIP: 0010:serial_base_ctrl_add+0x96/0x120
Call Trace:
<TASK>
serial_core_register_port+0x1a0/0x580
? __setup_irq+0x39c/0x660
? __kmalloc_cache_noprof+0x111/0x310
jsm_uart_port_init+0xe8/0x180 [jsm]
jsm_probe_one+0x1f4/0x410 [jsm]
local_pci_probe+0x42/0x90
pci_device_probe+0x22f/0x270
really_probe+0xdb/0x340
? pm_runtime_barrier+0x54/0x90
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8c/0xe0
bus_add_driver+0x112/0x1f0
driver_register+0x72/0xd0
jsm_init_module+0x36/0xff0 [jsm]
? __pfx_jsm_init_module+0x10/0x10 [jsm]
do_one_initcall+0x58/0x310
do_init_module+0x60/0x230
Tested with Digi Neo PCIe 8 port card.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SAMA7D65 USART compatible to DT bindings documentation.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/ba19dff5c20bd022cf5391ac909a85ab5e1797b4.1746201835.git.Ryan.Wanner@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When compile-testing this driver, the missing FW_CS_DSP module
causes a link failure:
aarch64-linux-ld: sound/pci/hda/cs35l41_hda.o: in function `cs35l41_shutdown_dsp':
cs35l41_hda.c:(.text+0x7e4): undefined reference to `cs_dsp_stop'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x7ec): undefined reference to `cs_dsp_power_down'
aarch64-linux-ld: sound/pci/hda/cs35l41_hda.o: in function `cs35l41_hda_remove':
cs35l41_hda.c:(.text+0x14b4): undefined reference to `cs_dsp_remove'
aarch64-linux-ld: sound/pci/hda/cs35l41_hda.o: in function `cs35l41_smart_amp.isra.0':
cs35l41_hda.c:(.text+0x189c): undefined reference to `cs_dsp_halo_init'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1bd4): undefined reference to `cs_dsp_power_up'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1c38): undefined reference to `cs_dsp_run'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1c80): undefined reference to `cs_dsp_get_ctl'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1c90): undefined reference to `cs_dsp_coeff_read_ctrl'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1cd4): undefined reference to `cs_dsp_get_ctl'
aarch64-linux-ld: cs35l41_hda.c:(.text+0x1ce4): undefined reference to `cs_dsp_coeff_read_ctrl'
Fixes: bdd9ea9187c4 ("ALSA: hda/hda_cs_dsp_ctl: Delete hda_cs_dsp_ctl module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250520162101.3929551-1-arnd@kernel.org
|
|
Introduce i2c APIs to read/write for proper configuration register
programming. It ensures that read-modify-write sequence is performed
and reserved bit in Runtime Flags 2 register are not touched.
Also legacy smbus block write inserted an extra count value into the
i2c data stream which breaks the register write on the usb5744.
Switching to new read/write i2c APIs fixes both issues.
Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com>
Co-developed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1747398760-284021-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TI USB8044 is similar to the USB8041.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507131143.2243079-2-mike.looijmans@topic.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TUSB8044 is similar to the TUSB8041. This adds the PID/VID values
and allows to specify the reset GPIO signal on the board.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20250507131143.2243079-1-mike.looijmans@topic.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the function usb_endpoint_type() rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250519063120.724793-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
