| Age | Commit message (Collapse) | Author |
|---|
|
Use the helper of_get_available_child_by_name() to simplify
sja1105_mdiobus_register().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify a5psw_probe() by using of_get_available_child_by_name().
While at it, move of_node_put(mdio) inside the if block to avoid code
duplication.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are lot of drivers using of_get_child_by_name() followed by
of_device_is_available() to find the available child node by name for a
given parent. Provide a helper for these users to simplify the code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge a new ACPI IRQ override quirk for Eluktronics MECH-17 (Gannon
Kolding) and an acpi_data_prop_read() fix making it reflect the OF
counterpart behavior in error cases (Andy Shevchenko).
* acpi-property:
ACPI: property: Fix return value for nval == 0 in acpi_data_prop_read()
* acpi-resource:
ACPI: resource: IRQ override for Eluktronics MECH-17
|
|
Fix a possible memory leak in the power capping subsystem (Joe Hattori).
* pm-powercap:
powercap: call put_device() on an error path in powercap_register_control_type()
|
|
The loop that detects/populates cache information already has a bounds
check on the array size but does not account for cache levels with
separate data/instructions cache. Fix this by incrementing the index
for any populated leaf (instead of any populated level).
Fixes: 5d425c186537 ("arm64: kernel: add support for cpu cache information")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Link: https://lore.kernel.org/r/20250206174420.2178724-1-rrendec@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A recent LLVM commit [1] started generating an .ARM.attributes section
similar to the one that exists for 32-bit, which results in orphan
section warnings (or errors if CONFIG_WERROR is enabled) from the linker
because it is not handled in the arm64 linker scripts.
ld.lld: error: arch/arm64/kernel/vdso/vgettimeofday.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: arch/arm64/kernel/vdso/vgetrandom.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/vsprintf.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/win_minmax.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/xarray.o):(.ARM.attributes) is being placed in '.ARM.attributes'
Discard the new sections in the necessary linker scripts to resolve the
warnings, as the kernel and vDSO do not need to retain it, similar to
the .note.gnu.property section.
Cc: stable@vger.kernel.org
Fixes: b3e5d80d0c48 ("arm64/build: Warn on orphan section placement")
Link: https://github.com/llvm/llvm-project/commit/ee99c4d4845db66c4daa2373352133f4b237c942 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250206-arm64-handle-arm-attributes-in-linker-script-v3-1-d53d169913eb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250204213207.337980-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs supports extensible and non-extensible ioctls. The extensible
ioctls need to check for the ioctl number itself not just the ioctl
command otherwise both backward- and forward compatibility are broken.
The pidfs ioctl handler also needs to look at the type of the ioctl
command to guard against cases where "[...] a daemon receives some
random file descriptor from a (potentially less privileged) client and
expects the FD to be of some specific type, it might call ioctl() on
this FD with some type-specific command and expect the call to fail if
the FD is of the wrong type; but due to the missing type check, the
kernel instead performs some action that userspace didn't expect."
(cf. [1]]
Link: https://lore.kernel.org/r/20250204-work-pidfs-ioctl-v1-1-04987d239575@kernel.org
Link: https://lore.kernel.org/r/CAG48ez2K9A5GwtgqO31u9ZL292we8ZwAA=TJwwEv7wRuJ3j4Lw@mail.gmail.com [1]
Fixes: 8ce352818820 ("pidfs: check for valid ioctl commands")
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org # v6.13; please backport with 8ce352818820 ("pidfs: check for valid ioctl commands")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Amir Goldstein <amir73il@gmail.com> says:
The two Fix patches have been tested by Alex together and each one
independently.
I also verified that they pass the LTP inoityf/fanotify tests.
* patches from https://lore.kernel.org/r/20250203223205.861346-1-amir73il@gmail.com:
fsnotify: disable pre-content and permission events by default
fsnotify: disable notification by default for all pseudo files
fsnotify: use accessor to set FMODE_NONOTIFY_*
Link: https://lore.kernel.org/r/20250203223205.861346-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After introducing pre-content events, we had a regression related to
disabling huge faults on files that should never have pre-content events
enabled.
This happened because the default f_mode of allocated files (0) does
not disable pre-content events.
Pre-content events are disabled in file_set_fsnotify_mode_by_watchers()
but internal files may not get to call this helper.
Initialize f_mode to disable permission and pre-content events for all
files and if needed they will be enabled for the callers of
file_set_fsnotify_mode_by_watchers().
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
STATMOUNT_MNT_OPTS can actually be missing if there are no options. This
is a change of behavior since 75ead69a7173 ("fs: don't let statmount return
empty strings").
The other checks shouldn't actually trigger, but add them for correctness
and for easier debugging if the test fails.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129160641.35485-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most pseudo files are not applicable for fsnotify events at all,
let alone to the new pre-content events.
Disable notifications to all files allocated with alloc_file_pseudo()
and enable legacy inotify events for the specific cases of pipe and
socket, which have known users of inotify events.
Pre-content events are also kept disabled for sockets and pipes.
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wi2pThSVY=zhO=ZKxViBj5QCRX-=AS2+rVknQgJnHXDFg@mail.gmail.com/
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prepending security options was made conditional on sb->s_op->show_options,
but security options are independent of sb options.
Fixes: 056d33137bf9 ("fs: prepend statmount.mnt_opts string with security_sb_mnt_opts()")
Fixes: f9af549d1fd3 ("fs: export mount options via statmount()")
Cc: stable@vger.kernel.org # v6.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129151253.33241-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Andreas Gruenbacher <agruenba@redhat.com> says:
Here's an updated version with an additional comment saying that
lockref_init() initializes count to 1.
* patches from https://lore.kernel.org/r/20250130135624.1899988-1-agruenba@redhat.com:
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
Link: https://lore.kernel.org/r/20250130135624.1899988-1-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users of lockref_init() now initialize the count to 1, so hardcode
that and remove the count argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-4-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In qd_alloc(), initialize the lockref count to 1 to cover the common
case. Compensate for that in gfs2_quota_init() by adjusting the count
back down to 0; this only occurs when mounting the filesystem rw.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-3-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the initialization of gl_lockref from gfs2_init_glock_once() to
gfs2_glock_get(). This allows to use lockref_init() there.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-2-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like it's normal for unset values to be zero, unset strings should be
empty instead of containing random values.
It seems to be a typical mistake that the mask returned by statmount is not
checked, which can result in various bugs.
With this fix, these bugs are prevented, since it is highly likely that
userspace would just want to turn the missing mask case into an empty
string anyway (most of the recently found cases are of this type).
Link: https://lore.kernel.org/all/CAJfpegsVCPfCn2DpM8iiYSS5DpMsLB8QBUCHecoj6s0Vxf4jzg@mail.gmail.com/
Fixes: 68385d77c05b ("statmount: simplify string option retrieval")
Fixes: 46eae99ef733 ("add statmount(2) syscall")
Cc: stable@vger.kernel.org # v6.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250130121500.113446-1-mszeredi@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.
[0]: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wno-unterminated-string-initialization
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20250121162648.1408743-1-brahmajit.xyz@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Clang static checker(scan-build) warning:
fs/stat.c:287:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
287 | stat->result_mask |= STATX_MNT_ID_UNIQUE;
| ~~~~~~~~~~~~~~~~~ ^
fs/stat.c:290:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
290 | stat->result_mask |= STATX_MNT_ID;
When vfs_getattr() failed because of security_inode_getattr(), 'stat' is
uninitialized. In this case, there is a harmless garbage problem in
vfs_statx_path(). It's better to return error directly when
vfs_getattr() failed, avoiding garbage value and more clearly.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250119025946.1168957-1-suhui@nfschina.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before attaching a new root to the old root, the children counter of the
new root is checked to verify that only the upcoming CPU's top group have
been connected to it. However since the recently added commit b729cc1ec21a
("timers/migration: Fix another race between hotplug and idle entry/exit")
this check is not valid anymore because the old root is pre-accounted
as a child to the new root. Therefore after connecting the upcoming
CPU's top group to the new root, the children count to be expected must
be 2 and not 1 anymore.
This omission results in the old root to not be connected to the new
root. Then eventually the system may run with more than one top level,
which defeats the purpose of a single idle migrator.
Also the old root is pre-accounted but not connected upon the new root
creation. But it can be connected to the new root later on. Therefore
the old root may be accounted twice to the new root. The propagation of
such overcommit can end up creating a double final top-level root with a
groupmask incorrectly initialized. Although harmless given that the final
top level roots will never have a parent to walk up to, this oddity
opportunistically reported the core issue:
WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote
CPU: 8 UID: 0 PID: 0 Comm: swapper/8
RIP: 0010:tmigr_requires_handle_remote
Call Trace:
<IRQ>
? tmigr_requires_handle_remote
? hrtimer_run_queues
update_process_times
tick_periodic
tick_handle_periodic
__sysvec_apic_timer_interrupt
sysvec_apic_timer_interrupt
</IRQ>
Fix the problem by taking the old root into account in the children count
of the new root so the connection is not omitted.
Also warn when more than one top level group exists to better detect
similar issues in the future.
Fixes: b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit")
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250205160220.39467-1-frederic@kernel.org
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the build error with clamp after WARN_ON on gcc 13.x+ (Guenter)
- HDCP related fixes (Suraj)
- PMU fix zero delta busyness issue (Umesh)
- Fix page cleanup on DMA remap failure (Brian)
- Drop 64bpp YUV formats from ICL+ SDR planes (Ville)
- GuC log related fix (Daniele)
- DisplayPort related fixes (Ankit, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6TDHpgI6dnOc0KI@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- OA uAPI related fixes (Ashutosh)
Driver Changes:
- Fix SRIOV migration initialization (Michal)
- Restore devcoredump to a sane state (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6S9rI1ScT_5Aw6_@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-02-05:
amdgpu:
- Add BO metadata flag for DCC
- Fix potential out of bounds access in display
- Seamless boot fix
- CONFIG_FRAME_WARN fix
- PSR1 fix
UAPI:
- Add new tiling flag for DCC write compress disable
Proposed userspace: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33255
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205214910.3664690-1-alexander.deucher@amd.com
|
|
bch_extent_rebalance
Previously, bch2_bkey_sectors_need_rebalance() called
bch2_target_accepts_data(), checking whether the target is writable.
However, this means that adding or removing devices from a target would
change the value of bch2_bkey_sectors_need_rebalance() for an existing
extent; this needs to be invariant so that the extent trigger can
correctly maintain rebalance_work accounting.
Instead, check target_accepts_data() in io_opts_to_rebalance_opts(),
before creating the bch_extent_rebalance entry.
This fixes (one?) cause of rebalance_work accounting being off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Spotted by sparse.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The discard path is supposed to issue journal flushes when there's too
many buckets empty buckets that need a journal commit before they can be
written to again, but at some point this code seems to have been lost.
Bring it back with a new optimization to make sure we don't issue too
many journal flushes: the journal now tracks the sequence number of the
most recent flush in progress, which the discard path uses when deciding
which buckets need a journal flush.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In the previous commit b3d82c2f2761, code was added to prevent journal sequence
overflow. Among them, the code added to journal_entry_open() uses the
bch2_fs_fatal_err_on() function to handle errors.
However, __journal_res_get() , which calls journal_entry_open() , calls
journal_entry_open() while holding journal->lock , but bch2_fs_fatal_err_on()
internally tries to acquire journal->lock , which results in a deadlock.
So we need to add a locked helper to handle fatal errors even when the
journal->lock is held.
Fixes: b3d82c2f2761 ("bcachefs: Guard against journal seq overflow")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For some unknown reason, checks on struct bkey_s_c_snapshot and struct
bkey_s_c_snapshot_tree pointers are missing.
Therefore, I think it would be appropriate to fix the incorrect pointer checking
through this patch.
Fixes: 4bd06f07bcb5 ("bcachefs: Fixes for snapshot_tree.master_subvol")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an (initial?) patch submission checklist, focusing mainly on
testing.
Yes, all patches must be tested, and that starts (but does not end) with
the patch author.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The destination argument of memtostr*() and strtomem*() must be a
fixed-size char array at compile time, so there is no need to use
__builtin_object_size() (which is useful for when an argument is
either a pointer or unknown). Instead use ARRAY_SIZE(), which has the
benefit of working around a bug in Clang (fixed[1] in 15+) that got
__builtin_object_size() wrong sometimes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501310832.kiAeOt2z-lkp@intel.com/
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://github.com/llvm/llvm-project/commit/d8e0a6d5e9dd2311641f9a8a5d2bf90829951ddc [1]
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In preparation for adding stricter type checking to the str/mem*()
helpers, provide a way to check that a variable is a byte array
via __must_be_byte_array().
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The C kernel helpers for evaluating C Strings were positioned where they
were visible to assembly inclusion, which was not intended. Move them
into the kernel and C-only area of the header so future changes won't
confuse the assembler.
Fixes: d7a516c6eeae ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()")
Fixes: 559048d156ff ("string: Check for "nonstring" attribute on strscpy() arguments")
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: managing MSI-X in driver
Michal Swiatkowski says:
It is another try to allow user to manage amount of MSI-X used for each
feature in ice. First was via devlink resources API, it wasn't accepted
in upstream. Also static MSI-X allocation using devlink resources isn't
really user friendly.
This try is using more dynamic way. "Dynamic" across whole kernel when
platform supports it and "dynamic" across the driver when not.
To achieve that reuse global devlink parameter pf_msix_max and
pf_msix_min. It fits how ice hardware counts MSI-X. In case of ice amount
of MSI-X reported on PCI is a whole MSI-X for the card (with MSI-X for
VFs also). Having pf_msix_max allow user to statically set how many
MSI-X he wants on PF and how many should be reserved for VFs.
pf_msix_min is used to set minimum number of MSI-X with which ice driver
should probe correctly.
Meaning of this field in case of dynamic vs static allocation:
- on system with dynamic MSI-X allocation support
* alloc pf_msix_min as static, rest will be allocated dynamically
- on system without dynamic MSI-X allocation support
* try alloc pf_msix_max as static, minimum acceptable result is
pf_msix_min
As Jesse and Piotr suggested pf_msix_max and pf_msix_min can (an
probably should) be stored in NVM. This patchset isn't implementing
that.
Dynamic (kernel or driver) way means that splitting MSI-X across the
RDMA and eth in case there is a MSI-X shortage isn't correct. Can work
when dynamic is only on driver site, but can't when dynamic is on kernel
site.
Let's remove this code and move to MSI-X allocation feature by feature.
If there is no more MSI-X for a feature, a feature is working with less
MSI-X or it is turned off.
There is a regression here. With MSI-X splitting user can run RDMA and
eth even on system with not enough MSI-X. Now only eth will work. RDMA
can be turned on by changing number of PF queues (lowering) and reprobe
RDMA driver.
Example:
72 CPU number, eth, RDMA and flow director (1 MSI-X), 1 MSI-X for OICR
on PF, and 1 more for RDMA. Card is using 1 + 72 + 1 + 72 + 1 = 147.
We set pf_msix_min = 2, pf_msix_max = 128
OICR: 1
eth: 72
flow director: 1
RDMA: 128 - 74 = 54
We can change number of queues on pf to 36 and do devlink reinit
OICR: 1
eth: 36
RDMA: 73
flow director: 1
We can also (implemented in "ice: enable_rdma devlink param") turned
RDMA off.
OICR: 1
eth: 72
RDMA: 0 (turned off)
flow director: 1
After this changes we have a static base vector for SRIOV (SIOV probably
in the feature). Last patch from this series is simplifying managing VF
MSI-X code based on static vector.
Now changing queues using ethtool is also changing MSI-X. If there is
enough MSI-X it is always one to one. When there is not enough there
will be more queues than MSI-X.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: init flow director before RDMA
ice: simplify VF MSI-X managing
ice: enable_rdma devlink param
ice: treat dyn_allowed only as suggestion
ice, irdma: move interrupts code to irdma
ice: get rid of num_lan_msix field
ice: remove splitting MSI-X between features
ice: devlink PF MSI-X max and min parameter
ice: count combined queues using Rx/Tx count
====================
Link: https://patch.msgid.link/20250205185512.895887-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify miic_parse_dt() by using the for_each_available_child_of_node()
helper instead of manually skipping unavailable child nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3e394d4cf8204bcf17b184bfda474085aa8ed0dd.1738771631.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Populate the PCS supported_interfaces bitmap with the interfaces that
this PCS supports. This makes the manual checking in miic_validate()
redundant, so remove that.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tfhYq-003aTm-Nx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A call to rtnl_nets_destroy() is needed to release references taken on
netns put in rtnl_nets.
CC: stable@vger.kernel.org
Fixes: 636af13f213b ("rtnetlink: Register rtnl_dellink() and rtnl_setlink() with RTNL_FLAG_DOIT_PERNET_WIP.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205221037.2474426-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
John Daley says:
====================
enic: Use Page Pool API for receiving packets
Use the Page Pool API for RX. The Page Pool API improves bandwidth and
CPU overhead by recycling pages instead of allocating new buffers in the
driver. Also, page pool fragment allocation for smaller MTUs is used
allow multiple packets to share pages.
RX code was moved to its own file and some refactoring was done
beforehand to make the page pool changes more trasparent and to simplify
the resulting code.
====================
Link: https://patch.msgid.link/20250205235416.25410-1-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the move to using the Page Pool API for RX, rx copybreak was not
showing any improvement in host CPU overhead, latency or bandwidth so
the driver no longer makes use of the rx_copybreak setting. This patch
removes the ethtool tuneable hooks to set and get the rx copybreak since
they and now no-ops. Rx copybreak was the only tunable supported, so
remove the set and get tunable callbacks all together.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-5-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Page Pool API improves bandwidth and CPU overhead by recycling pages
instead of allocating new buffers in the driver. Make use of page pool
fragment allocation for smaller MTUs so that multiple packets can share
a page. For MTUs larger than PAGE_SIZE, adjust the 'order' page
parameter so that contiguous pages can be used to receive the larger
packets.
The RQ descriptor field 'os_buf' is repurposed to hold page pointers
allocated from page_pool instead of SKBs. When packets arrive, SKBs are
allocated and the page pointers are attached instead of preallocating SKBs.
'alloc_fail' netdev statistic is incremented when page_pool_dev_alloc()
fails.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split up RX handler functions in preparation for moving
to a page pool based implementation.
No functional changes.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250205235416.25410-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
