summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-13btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.shMasahiro Yamada
CONFIG_DEBUG_INFO_BTF depends on CONFIG_BPF_SYSCALL, which in turn selects CONFIG_BPF. When CONFIG_DEBUG_INFO_BTF=y, CONFIG_BPF=y is always met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240913173759.1316390-1-masahiroy@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13net: enetc: Replace ifdef with IS_ENABLEDMartyn Welch
The enetc driver uses ifdefs when checking whether CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works if the driver is built-in but fails if the driver is available as a kernel module. Replace the instances of ifdef with use of the IS_ENABLED macro, that will evaluate as true when this feature is built as a kernel module and follows the kernel's coding style. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240912173742.484549-1-martyn.welch@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13fbnic: Set napi irq value after calling netif_napi_addBrett Creeley
The driver calls netif_napi_set_irq() and then calls netif_napi_add(), which calls netif_napi_add_weight(). At the end of netif_napi_add_weight() is a call to netif_napi_set_irq(napi, -1), which clears the previously set napi->irq value. Fix this by calling netif_napi_set_irq() after calling netif_napi_add(). This was found when reviewing another patch and I have no way to test this, but the fix seemed relatively straight forward. Fixes: bc6107771bb4 ("eth: fbnic: Allocate a netdevice and napi vectors with queues") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20240912174922.10550-1-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13Documentation: networking: Fix missing PSE documentation and grammar issuesKory Maincent
Fix a missing end of phrase in the documentation. It describes the ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained. Also, fix grammar issues by using simple present tense instead of present continuous. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13net: ipv6: rpl_iptunnel: Fix memory leak in rpl_inputJustin Iurman
Free the skb before returning from rpl_input when skb_cow_head() fails. Use a "drop" label and goto instructions. Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13r8169: disable ALDPS per default for RTL8125Heiner Kallweit
En-Wei reported that traffic breaks if cable is unplugged for more than 3s and then re-plugged. This was supposed to be fixed by 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125"). But apparently this didn't fix the issue for everybody. The 3s threshold rang a bell, as this is the delay after which ALDPS kicks in. And indeed disabling ALDPS fixes the issue for this user. Maybe this fixes the issue in general. In a follow-up step we could remove the first fix attempt and see whether anybody complains. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: En-Wei WU <en-wei.wu@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13net: ag71xx: remove dead code pathQianqiang Liu
The "err" is always zero, so the following branch can never be executed: if (err) { ndev->stats.rx_dropped++; kfree_skb(skb); } Therefore, the "if" statement can be removed. Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/20240911135828.378317-1-usama.anjum@collabora.com Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com> Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13Merge tag 'for-net-next-2024-09-12' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604 - btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 - btrtl: Add the support for RTL8922A - btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) - btnxpuart: Add support for ISO packets - btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 - btsdio: Do not bind to non-removable CYW4373 - hci_uart: Add support for Amlogic HCI UART * tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits) Bluetooth: btintel_pcie: Allocate memory for driver private data Bluetooth: btusb: Fix not handling ZPL/short-transfer Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) Bluetooth: btsdio: Do not bind to non-removable CYW4373 Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED Bluetooth: replace deprecated strncpy with strscpy_pad Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B Bluetooth: Use led_set_brightness() in LED trigger activate() callback Bluetooth: btrtl: Use kvmemdup to simplify the code Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 Bluetooth: btrtl: Add the support for RTL8922A Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed Bluetooth: hci_conn: Remove redundant memset after kzalloc Bluetooth: L2CAP: Remove unused declarations dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855 Bluetooth: btnxpuart: Add support for ISO packets Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 ... ==================== Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13netkit: Assign missing bpf_net_contextBreno Leitao
During the introduction of struct bpf_net_context handling for XDP-redirect, the netkit driver has been missed, which also requires it because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the per-CPU variables. Otherwise we see the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000038 bpf_redirect() netkit_xmit() dev_hard_start_xmit() Set the bpf_net_context before invoking netkit_xmit() program within the netkit driver. Fixes: 401cb7dae813 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.") Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20240912155620.1334587-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13xsk: fix batch alloc API on non-coherent systemsMaciej Fijalkowski
In cases when synchronizing DMA operations is necessary, xsk_buff_alloc_batch() returns a single buffer instead of the requested count. This puts the pressure on drivers that use batch API as they have to check for this corner case on their side and take care of allocations by themselves, which feels counter productive. Let us improve the core by looping over xp_alloc() @max times when slow path needs to be taken. Another issue with current interface, as spotted and fixed by Dries, was that when driver called xsk_buff_alloc_batch() with @max == 0, for slow path case it still allocated and returned a single buffer, which should not happen. By introducing the logic from first paragraph we kill two birds with one stone and address this problem as well. Fixes: 47e4075df300 ("xsk: Batched buffer allocation for the pool") Reported-and-tested-by: Dries De Winter <ddewinter@synamedia.com> Co-developed-by: Dries De Winter <ddewinter@synamedia.com> Signed-off-by: Dries De Winter <ddewinter@synamedia.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://patch.msgid.link/20240911191019.296480-1-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-13dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' againJohan Hovold
Commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema") incorrectly removed 'vddpe-3v3-supply' from the bindings, which results in DT checker warnings like: arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dtb: pcie@600000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected) from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml# Note that this property has been part of the Qualcomm PCIe bindings since 2018 and would need to be deprecated rather than simply removed if there is a desire to replace it with 'vpcie3v3' which is used for some non-Qualcomm controllers. Link: https://lore.kernel.org/lkml/Zp_LPixNnh-2Fy5N@hovoldconsulting.com/ Fixes: 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema") Link: https://lore.kernel.org/r/20240723151328.684-1-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-13Merge branch 'two-tiny-fixes-for-btf-record'Alexei Starovoitov
Hou Tao says: ==================== The tiny patch set aims to fix two problems found during the development of supporting dynptr key in hash table. Patch #1 fixes the missed btf_record_free() when map creation fails and patch #2 fixes the missed kfree() when there is no special field in the passed btf. ==================== Link: https://lore.kernel.org/r/20240912012845.3458483-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Call the missed kfree() when there is no special field in btfHou Tao
Call the missed kfree() in btf_parse_struct_metas() when there is no special field in btf, otherwise will get the following kmemleak report: unreferenced object 0xffff888101033620 (size 8): comm "test_progs", pid 604, jiffies 4295127011 ...... backtrace (crc e77dc444): [<00000000186f90f3>] kmemleak_alloc+0x4b/0x80 [<00000000ac8e9c4d>] __kmalloc_cache_noprof+0x2a1/0x310 [<00000000d99d68d6>] btf_new_fd+0x72d/0xe90 [<00000000f010b7f8>] __sys_bpf+0xec3/0x2410 [<00000000e077ed6f>] __x64_sys_bpf+0x1f/0x30 [<00000000a12f9e55>] x64_sys_call+0x199/0x9f0 [<00000000f3029ea6>] do_syscall_64+0x3b/0xc0 [<000000005640913a>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 7a851ecb1806 ("bpf: Search for kptrs in prog BTF structs") Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20240912012845.3458483-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Call the missed btf_record_free() when map creation failsHou Tao
When security_bpf_map_create() in map_create() fails, map_create() will call btf_put() and ->map_free() callback to free the map. It doesn't free the btf_record of map value, so add the missed btf_record_free() when map creation fails. However btf_record_free() needs to be called after ->map_free() just like bpf_map_free_deferred() did, because ->map_free() may use the btf_record to free the special fields in preallocated map value. So factor out bpf_map_free() helper to free the map, btf_record, and btf orderly and use the helper in both map_create() and bpf_map_free_deferred(). Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20240912012845.3458483-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13tools: PCI: Remove unused BILLION macrozhang jiao
The macro BILLION is never referenced in the code. Remove it. Link: https://lore.kernel.org/r/20240911060401.9230-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-13tools: PCI: Remove .*.cmd files with make cleanzhang jiao
Remove any leftover .*.cmd files with make clean. No functional changes intended. Link: https://lore.kernel.org/linux-pci/20240902041240.5475-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> [kwilczynski: commit log, move .*.cmd before .*.d to align with other Makefiles, don't remove the newline] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-13PCI: Pass domain number to pci_bus_release_domain_nr() explicitlyManivannan Sadhasivam
The pci_bus_release_domain_nr() API is supposed to free the domain number allocated by pci_bus_find_domain_nr(). Most of the callers of pci_bus_find_domain_nr(), store the domain number in pci_bus::domain_nr. As such, the pci_bus_release_domain_nr() implicitly frees the domain number by dereferencing 'struct pci_bus'. However, one of the callers of this API, the PCI endpoint subsystem, doesn't have 'struct pci_bus', so it only passes NULL. Due to this, the API will end up dereferencing the NULL pointer. To fix this issue, pass the domain number to this API explicitly. Since 'struct pci_bus' is not used for anything else other than extracting the domain number, it makes sense to pass the domain number directly. Fixes: 0328947c5032 ("PCI: endpoint: Assign PCI domain number for endpoint controllers") Closes: https://lore.kernel.org/linux-pci/c0c40ddb-bf64-4b22-9dd1-8dbb18aa2813@stanley.mountain Link: https://lore.kernel.org/linux-pci/20240912053025.25314-1-manivannan.sadhasivam@linaro.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-13PCI: dra7xx: Fix error handling when IRQ request fails in probeSiddharth Vadapalli
Commit d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe") moved the IRQ request for "dra7xx-pcie-main" towards the end of dra7xx_pcie_probe(). However, the error handling does not take into account the initialization performed by either dra7xx_add_pcie_port() or dra7xx_add_pcie_ep(), depending on the mode of operation. Fix the error handling to address this. Fixes: d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe") Link: https://lore.kernel.org/linux-pci/20240827122422.985547-3-s-vadapalli@ti.com Tested-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org
2024-09-13PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQSiddharth Vadapalli
Commit da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ") switched from devm_request_irq() to devm_request_threaded_irq() for the "dra7xx-pcie-main" interrupt. Since the primary handler was set to NULL, the "IRQF_ONESHOT" flag should have also been set. Fix this. Fixes: da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ") Suggested-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/linux-pci/20240827122422.985547-2-s-vadapalli@ti.com Reported-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org
2024-09-13Merge tag 'pci-v6.11-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Prevent a possible deadlock (reported by lockdep) when a driver relinquishes a pci_dev, another driver claims it, and one uses managed pcim_enable_device() and the other doesn't (Philipp Stanner) * tag 'pci-v6.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Fix potential deadlock in pcim_intx()
2024-09-13rpmsg: glink: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `__struct_group()` helper to create a new tagged `struct glink_msg_hdr`. This structure groups together all the members of the flexible `struct glink_msg` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct glink_msg` to `struct glink_msg_hdr`. We also want to ensure that when new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct glink_msg_hdr` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. We also use `container_of()` whenever we need to retrieve a pointer to the flexible structure, through which we can access the flexible-array member, if necessary. Additionally, we use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of a flexible structure where the size for the flexible-array member is known at compile-time. So, with these changes, fix the following warnings: drivers/rpmsg/qcom_glink_native.c:51:26: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/rpmsg/qcom_glink_native.c:459:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/rpmsg/qcom_glink_native.c:846:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/rpmsg/qcom_glink_native.c:968:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/rpmsg/qcom_glink_native.c:1380:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/ZrOQa2gew5yadyt3@cute Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-09-13pm: cpupower: rename raw_pylibcpupower.iMin-Hua Chen
The raw_pylibcpupower.i is removed unexpectedly after 'make mrproper' We can reproduce the error by performing the following steps: cd linux-next make mrproper cd tools/power/cpupower/bindings/python make We will get an error message: make: *** No rule to make target 'raw_pylibcpupower.i', needed by 'raw_pylibcpupower_wrap.c'. Stop. The root cause: The *.i files are already used for pre-processor output files and the kernel removes all the *.i files by 'make mrproper'. That explains why the raw_pylibcpupower.i is removed by 'make mrproper'. To fix it, Follow John's suggestion to rename raw_pylibcpupower.i to raw_pylibcpupower.swg. See: https://www.swig.org/Doc4.2/SWIG.html Reviewed-by: John B. Wyatt IV <jwyatt@redhat.com> Reviewed-by: John B. Wyatt IV <sageofredondo@gmail.com> Tested-by: John B. Wyatt IV <jwyatt@redhat.com> Tested-by: John B. Wyatt IV <sageofredondo@gmail.com> Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-13selftests/bpf: Add a test case to write mtu result into .rodataDaniel Borkmann
Add a test which attempts to call bpf_check_mtu() and writes the MTU into .rodata section of the BPF program, and for comparison this adds test cases also for .bss and .data section again. The bpf_check_mtu() is a bit more special in that the passed mtu argument is read and written by the helper (instead of just written to). Assert that writes into .rodata remain rejected by the verifier. # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const [ 1.657367] bpf_testmod: loading out-of-tree module taints kernel. [ 1.657773] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #473/1 verifier_const/rodata/strtol: write rejected:OK #473/2 verifier_const/bss/strtol: write accepted:OK #473/3 verifier_const/data/strtol: write accepted:OK #473/4 verifier_const/rodata/mtu: write rejected:OK #473/5 verifier_const/bss/mtu: write accepted:OK #473/6 verifier_const/data/mtu: write accepted:OK #473 verifier_const:OK [...] Summary: 2/10 PASSED, 0 SKIPPED, 0 FAILED For comparison, without the MEM_UNINIT on bpf_check_mtu's proto: # ./vmtest.sh -- ./test_progs -t verifier_const [...] #473/3 verifier_const/data/strtol: write accepted:OK run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #473/4 verifier_const/rodata/mtu: write rejected:FAIL #473/5 verifier_const/bss/mtu: write accepted:OK #473/6 verifier_const/data/mtu: write accepted:OK #473 verifier_const:FAIL [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240913191754.13290-9-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Add a test case to write strtol result into .rodataDaniel Borkmann
Add a test case which attempts to write into .rodata section of the BPF program, and for comparison this adds test cases also for .bss and .data section. Before fix: # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const tester_init:PASS:tester_log_buf 0 nsec process_subtest:PASS:obj_open_mem 0 nsec process_subtest:PASS:specs_alloc 0 nsec run_subtest:PASS:obj_open_mem 0 nsec run_subtest:FAIL:unexpected_load_success unexpected success: 0 #465/1 verifier_const/rodata: write rejected:FAIL #465/2 verifier_const/bss: write accepted:OK #465/3 verifier_const/data: write accepted:OK #465 verifier_const:FAIL [...] After fix: # ./vmtest.sh -- ./test_progs -t verifier_const [...] ./test_progs -t verifier_const #465/1 verifier_const/rodata: write rejected:OK #465/2 verifier_const/bss: write accepted:OK #465/3 verifier_const/data: write accepted:OK #465 verifier_const:OK [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-8-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Rename ARG_PTR_TO_LONG test descriptionDaniel Borkmann
Given we got rid of ARG_PTR_TO_LONG, change the test case description to avoid potential confusion: # ./vmtest.sh -- ./test_progs -t verifier_int_ptr [...] ./test_progs -t verifier_int_ptr [ 1.610563] bpf_testmod: loading out-of-tree module taints kernel. [ 1.611049] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #489/1 verifier_int_ptr/arg pointer to long uninitialized:OK #489/2 verifier_int_ptr/arg pointer to long half-uninitialized:OK #489/3 verifier_int_ptr/arg pointer to long misaligned:OK #489/4 verifier_int_ptr/arg pointer to long size < sizeof(long):OK #489/5 verifier_int_ptr/arg pointer to long initialized:OK #489 verifier_int_ptr:OK Summary: 1/5 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240913191754.13290-7-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized testDaniel Borkmann
The assumption of 'in privileged mode reads from uninitialized stack locations are permitted' is not quite correct since the verifier was probing for read access rather than write access. Both tests need to be annotated as __success for privileged and unprivileged. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-6-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of errorDaniel Borkmann
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input arguments, zero the value for the case of an error as otherwise it could leak memory. For tracing, it is not needed given CAP_PERFMON can already read all kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped in here. Also, the MTU helpers mtu_len pointer value is being written but also read. Technically, the MEM_UNINIT should not be there in order to always force init. Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now implies two things actually: i) write into memory, ii) memory does not have to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory, ii) memory must be initialized. This means that for bpf_*_check_mtu() we're readding the issue we're trying to fix, that is, it would then be able to write back into things like .rodata BPF maps. Follow-up work will rework the MEM_UNINIT semantics such that the intent can be better expressed. For now just clear the *mtu_len on error path which can be lifted later again. Fixes: 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged typesDaniel Borkmann
When checking malformed helper function signatures, also take other argument types into account aside from just ARG_PTR_TO_UNINIT_MEM. This concerns (formerly) ARG_PTR_TO_{INT,LONG} given uninitialized memory can be passed there, too. The func proto sanity check goes back to commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type"), and its purpose was to detect wrong func protos which had more than just one MEM_UNINIT-tagged type as arguments. The reason more than one is currently not supported is as we mark stack slots with STACK_MISC in check_helper_call() in case of raw mode based on meta.access_size to allow uninitialized stack memory to be passed to helpers when they just write into the buffer. Probing for base type as well as MEM_UNINIT tagging ensures that other types do not get missed (as it used to be the case for ARG_PTR_TO_{INT,LONG}). Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types") Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20240913191754.13290-4-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Fix helper writes to read-only mapsDaniel Borkmann
Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the subsequent call to check_map_access_type() and given the BPF map is read-only it succeeds. The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT when results are written into them as opposed to read out of them. The latter indicates that it's okay to pass a pointer to uninitialized memory as the memory is written to anyway. However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM just with additional alignment requirement. So it is better to just get rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the fixed size memory types. For this, add MEM_ALIGNED to additionally ensure alignment given these helpers write directly into the args via *<ptr> = val. The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>). MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated argument types, since in !MEM_FIXED_SIZE cases the verifier does not know the buffer size a priori and therefore cannot blindly write *<ptr> = val. Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types") Reported-by: Lonial Con <kongln9170@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpersDaniel Borkmann
Both bpf_strtol() and bpf_strtoul() helpers passed a temporary "long long" respectively "unsigned long long" to __bpf_strtoll() / __bpf_strtoull(). Later, the result was checked for truncation via _res != ({unsigned,} long)_res as the destination buffer for the BPF helpers was of type {unsigned,} long which is 32bit on 32bit architectures. Given the latter was a bug in the helper signatures where the destination buffer got adjusted to {s,u}64, the truncation check can now be removed. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913191754.13290-2-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bitDaniel Borkmann
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit: The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long" and therefore always considered fixed 64bit no matter if 64 or 32bit underlying architecture. This contract breaks in case of the two mentioned helpers since their BPF_CALL definition for the helpers was added with {unsigned,}long *res. Meaning, the transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper) breaks here. Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program point of view, this means upper bits will be seen as uninitialised. Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation. Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger compiler warnings (incompatible pointer types passing 'long *' to parameter of type '__s64 *' (aka 'long long *')) for existing BPF programs. Leaving the signatures as-is would be fine as from BPF program point of view it is still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying architectures. Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue. Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13selftests/bpf: Add tests for sdiv/smod overflow casesYonghong Song
Subtests are added to exercise the patched code which handles - LLONG_MIN/-1 - INT_MIN/-1 - LLONG_MIN%-1 - INT_MIN%-1 where -1 could be an immediate or in a register. Without the previous patch, all these cases will crash the kernel on x86_64 platform. Additional tests are added to use small values (e.g. -5/-1, 5%-1, etc.) in order to exercise the additional logic with patched insns. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20240913150332.1188102-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13bpf: Fix a sdiv overflow issueYonghong Song
Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ Reported-by: Zac Ecob <zacecob@protonmail.com> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240913150326.1187788-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-13dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yamlRob Herring (Arm)
"nvidia,tegra186-ccplex-cluster" is also documented in arm/tegra/nvidia,tegra-ccplex-cluster.yaml. As it covers Tegra234 as well, drop nvidia,tegra186-ccplex-cluster.yaml. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240910234422.1042486-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yamlRob Herring (Arm)
The compatible strings for mt6795 clocks are also documented in other schemas: "mediatek,mt6795-apmixedsys" in clock/mediatek,apmixedsys.yaml "mediatek,mt6795-topckgen" in clock/mediatek,topckgen.yaml "mediatek,mt6795-pericfg" in clock/mediatek,pericfg.yaml "mediatek,mt6795-infracfg" in clock/mediatek,infracfg.yaml The only difference is #reset-cells is not allowed in some of these, but that aligns with actual users in .dts files. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240910234238.1028422-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13of/irq: Use helper to define resourcesVasileios Amoiridis
Resources definition can become simpler and more organised by using the dedicated helpers. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240912221605.27089-3-vassilisamir@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13of/irq: Make use of irq_get_trigger_type()Vasileios Amoiridis
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more simple irq_get_trigger_type(irq). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240912221605.27089-2-vassilisamir@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: clk: vc5: Make SD/OE pin configuration properties not requiredGeert Uytterhoeven
"make dtbs_check": arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,shutdown' is a required property From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,output-enable-active' is a required property From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml Versaclock 5 clock generators can have their configuration stored in One-Time Programmable (OTP) memory. Hence there is no need to specify DT properties for manual configuration if the OTP has been programmed before. Likewise, the Linux driver does not touch the SD/OE bits if the corresponding properties are not specified, cfr. commit d83e561d43bc71e5 ("clk: vc5: Add properties for configuring SD/OE behavior"). Reflect this in the bindings by making the "idt,shutdown" and "idt,output-enable-active" properties not required, just like the various "idt,*" properties in the per-output child nodes. Fixes: 275e4e2dc0411508 ("dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/68037ad181991fe0b792f6d003e3e9e538d5ffd7.1673452118.git.geert+renesas@glider.be Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13drivers/of: Improve documentation for match_stringMiquel Sabaté Solà
The description of the function now explicitly states that it's an *exact* match for the given string (i.e. not a submatch). It also better states all the possible return values. Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com> Link: https://lore.kernel.org/r/20240911204938.9172-1-mikisabate@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13of: property: Do some clean up with use of __free()Zhang Zekun
__free() provides a scoped of_node_put() functionality to put the device_node automatically, and we don't need to call of_node_put() directly. Let's simplify the code a bit with the use of __free(). Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Link: https://lore.kernel.org/r/20240830020626.115933-4-zhangzekun11@huawei.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: watchdog: qcom-wdt: document support on SA8255pNikunj Kela
Add a compatible for the SA8255p platform's KPSS watchdog. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> Link: https://lore.kernel.org/r/20240910165926.2408630-1-quic_nkela@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteerFabio Estevam
Add an entry to fsl,imx8qm-irqsteer. This fixes the following dt-schema warning: failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer'] Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240701204106.160128-1-festevam@gmail.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiersNikunj Kela
Extended SPI and extended PPI interrupts are in the range [0-1023] and [0-127] respectively, supported by GICv3.1. Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells. Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> Link: https://lore.kernel.org/r/20240910162637.2382656-1-quic_nkela@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: dma: Add lpc32xx DMA mux bindingPiotr Wojtaszczyk
LPC32XX SoCs use pl080 dma controller which have few request signals multiplexed between peripherals. This binding describes how devices can use the multiplexed request signals. Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240627150046.258795-3-piotr.wojtaszczyk@timesys.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"Rob Herring (Arm)
"maxim,max1237" is already documented in iio/adc/maxim,max1238.yaml, so drop it from trivial-devices.yaml. Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-4-ad684c754b9c@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: trivial-devices: Drop duplicate LM75 compatible devicesRob Herring (Arm)
Drop LM75 compatible devices which are already documented in lm75.yaml. Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-3-ad684c754b9c@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: trivial-devices: Deprecate "ad,ad7414"Rob Herring (Arm)
The correct vendor prefix for Analog Devices is "adi", not "ad". Both forms are in use. Add the "adi,ad7414" version and deprecate the "ad,ad7414" version. Keep them together even though it breaks strict alphabetical ordering. Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-2-ad684c754b9c@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatiblesRob Herring (Arm)
"at,24c08" does not have a correct vendor prefix. The correct compatible string would be "atmel,24c08" which is already documented in at24.yaml. It is also unused anywhere, so just drop it. "st,24c256" is already documented in at24.yaml, so drop it as well. Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-1-ad684c754b9c@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: wakeup-source: update reference to m8921-keypad.yamlSimon Horman
commit 53ed3233e6b5 ("dt-bindings: input: qcom,pm8921-keypad: convert to YAML format") resulted in a renaming of the output .txt file from qcom,pm8xxx-keypad.txt to qcom,pm8921-keypad.yaml. This patch makes a corresponding update to the link to that .txt file in wakeup-source.txt. Flagged by make htmldocs: Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240908-keypad-wakeup-ref-v1-1-762e4641468a@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-09-13dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255pNikunj Kela
Add compatible for pdc interrupt controller representing support on SA8255p. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> Link: https://lore.kernel.org/r/20240905191510.3775179-1-quic_nkela@quicinc.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:21:05 +0000