| Age | Commit message (Collapse) | Author |
|---|
|
rocm-smi will be able to show the events for KFD process
start/end, it is the implementation of this feature.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With adding sriov_vf check, we directly return EOPNOTSUPP in
ras_reset_error_count as we should not do anything on VF to reset RAS error
count.
This also fixes the issue that loading guest driver causes register
violations.
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Except HDP v5.2 all use a common logic for HDP flush. Use a generic
function. HDP v5.2 forces NO_KIQ logic, revisit it later.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set RAS EEPROM table version to v3 for umc v12_5.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for per-queue reset on SDMA v4.4.2 when running with:
1. MEC firmware version 17 or later
2. DPM indicates SDMA reset is supported
v2: Fixed supported firmware versions (Lijo)
Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for additional GFX11.5.2/11.5.3 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.5.2/11.5.3 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The structures are large and they do not require contiguous
memory so use vzalloc.
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These have been announced so add them to the table.
Link: https://www.amd.com/en/products/processors/laptop/ryzen/ai-300-series/amd-ryzen-ai-7-350.html
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
htmldocs build warning: "Function parameter or struct member 'fused_io'
not described in 'amdgpu_display_manager'".
[How]
Add missing description.
Fixes: ce801e5d6c1b ("drm/amd/display: HDCP Locality check using DMUB Fused IO")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the local setting rather than the global parameter.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
JPEG is not supported on Vega only.
Fixes: 0a6e7b06bdbe ("drm/amdgpu: Remove JPEG from vega and carrizo video caps")
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement the GFX12 KCQ pipe reset, and disable the GFX12
kernel compute queue until the CPFW fully supports it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Checking hive is more readable.
The following smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6820 amdgpu_pci_slot_reset()
warn: iterator used outside loop: 'tmp_adev'
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Kernel doorbell BOs needs to be freed before ttm_fini.
Fixes: 54c30d2a8def ("drm/amdgpu: create kernel doorbell pages")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES queue deactivation and active status are already set in
mes_userq_unmap|map(), so the caller needn't set the queue_active
bit again.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add function for vcn queue reset to make driver to
do fine-grained reset instead of the whole gpu reset.
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Guest is reading/writing to snoop register which is a security violation
We moved the code to the host driver
And also added a validation on the guest side to check if it's guest
Signed-off-by: Masha Grinman <Masha.Grinman@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com
Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
pci_iov_add_virtfn
pci_device_add
pci_fixup_device(pci_fixup_header) <--
device_add
bus_notify
iommu_bus_notifier
+ iommu_probe_device
+ arm_smmu_probe_device
pci_bus_add_device
pci_fixup_device(pci_fixup_final) <--
device_attach
driver_probe_device
really_probe
pci_dma_configure
acpi_dma_configure_id
- iommu_probe_device
- arm_smmu_probe_device
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
|
|
make dt_binding_check:
Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml: maintainers:0: 'Frank Li' does not match '@'
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Fix this by adding Frank's email address.
Fixes: 9ca5a7d9d2e05de6 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/185e1e06692dc5b08abcde2d3dd137c78e979d08.1744301283.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When working on dynamic ITMT priority support, it was observed that
"asym_prefer_cpu" on AMD systems supporting Preferred Core ranking
was always set to the first CPU in the sched group when the system boots
up despite another CPU in the group having a higher ITMT ranking.
"asym_prefer_cpu" is cached when the sched domain hierarchy is
constructed. On AMD systems that support Preferred Core rankings, sched
domains are rebuilt when ITMT support is enabled for the first time from
amd_pstate*_cpu_init().
Since amd_pstate*_cpu_init() is called to initialize the cpudata for
each CPU, the ITMT support is enabled after the first CPU initializes
its asym priority but this is too early since other CPUs have not yet
initialized their asym priorities and the sched domain is rebuilt only
once when the support is toggled on for the first time.
Initialize the asym priorities first in amd_pstate*_cpu_init() and then
enable ITMT support later in amd_pstate_register_driver() to ensure all
CPUs have correctly initialized their asym priorities before sched
domain hierarchy is rebuilt.
Clear the ITMT support when the amd-pstate driver unregisters since core
rankings cannot be trusted unless the update_limits() callback is
operational.
Remove the delayed work mechanism now that ITMT support is only toggled
from the driver init path which is outside the cpuhp critical section.
Fixes: f3a052391822 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250411081439.27652-1-kprateek.nayak@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Convert the raw spinlock used by BPF ringbuf to rqspinlock. Currently,
we have an open syzbot report of a potential deadlock. In addition, the
ringbuf can fail to reserve spuriously under contention from NMI
context.
It is potentially attractive to enable unconstrained usage (incl. NMIs)
while ensuring no deadlocks manifest at runtime, perform the conversion
to rqspinlock to achieve this.
This change was benchmarked for BPF ringbuf's multi-producer contention
case on an Intel Sapphire Rapids server, with hyperthreading disabled
and performance governor turned on. 5 warm up runs were done for each
case before obtaining the results.
Before (raw_spinlock_t):
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.440 ± 0.019M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 2.706 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 3.130 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 2.472 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.352 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.813 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.988 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.245 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.148 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.190 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.490 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.180 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.201 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.226 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.164 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.874 ± 0.001M/s (drops 0.000 ± 0.000M/s)
After (rqspinlock_t):
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.078 ± 0.019M/s (drops 0.000 ± 0.000M/s) (-3.16%)
rb-libbpf nr_prod 2 2.801 ± 0.014M/s (drops 0.000 ± 0.000M/s) (3.51%)
rb-libbpf nr_prod 3 3.454 ± 0.005M/s (drops 0.000 ± 0.000M/s) (10.35%)
rb-libbpf nr_prod 4 2.567 ± 0.002M/s (drops 0.000 ± 0.000M/s) (3.84%)
rb-libbpf nr_prod 8 2.468 ± 0.001M/s (drops 0.000 ± 0.000M/s) (4.93%)
rb-libbpf nr_prod 12 2.510 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-10.77%)
rb-libbpf nr_prod 16 2.075 ± 0.001M/s (drops 0.000 ± 0.000M/s) (4.38%)
rb-libbpf nr_prod 20 2.640 ± 0.001M/s (drops 0.000 ± 0.000M/s) (17.59%)
rb-libbpf nr_prod 24 2.092 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-2.61%)
rb-libbpf nr_prod 28 2.426 ± 0.005M/s (drops 0.000 ± 0.000M/s) (10.78%)
rb-libbpf nr_prod 32 2.331 ± 0.004M/s (drops 0.000 ± 0.000M/s) (-6.39%)
rb-libbpf nr_prod 36 2.306 ± 0.003M/s (drops 0.000 ± 0.000M/s) (5.78%)
rb-libbpf nr_prod 40 2.178 ± 0.002M/s (drops 0.000 ± 0.000M/s) (-1.04%)
rb-libbpf nr_prod 44 2.293 ± 0.001M/s (drops 0.000 ± 0.000M/s) (3.01%)
rb-libbpf nr_prod 48 2.022 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-6.56%)
rb-libbpf nr_prod 52 1.809 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-3.47%)
There's a fair amount of noise in the benchmark, with numbers on reruns
going up and down by 10%, so all changes are in the range of this
disturbance, and we see no major regressions.
Reported-by: syzbot+850aaf14624dc0c6d366@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000004aa700061379547e@google.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250411101759.4061366-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The evsel__handle_error_quirks() is to fixup invalid event attributes on
some architecture based on the error code. Currently it's only used for
AMD to disable precise_ip not to use IBS which has more restrictions.
But the commit c33aea446bf555ab changed call evsel__precise_ip_fallback
for any errors so there's no difference with the above function. To
make matter worse, it caused a problem with branch stack on Zen3.
The IBS doesn't support branch stack so it should use a regular core
PMU event. The default event is set precise_max and it starts with 3.
And evsel__precise_ip_fallback() tries with it and reduces the level one
by one. At last it tries with 0 but it also failed on Zen3 since the
branch stack is not supported for the cycles event.
At this point, evsel__precise_ip_fallback() restores the original
precise_ip value (3) in the hope that it can succeed with other modifier
(like exclude_kernel). Then evsel__handle_error_quirks() see it has
precise_ip != 0 and make it retry with 0. This created an infinite
loop.
Before:
$ perf record -b -vv |& grep removing
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
removing precise_ip on AMD
...
After:
$ perf record -b true
Error:
Failure to open event 'cycles:P' on PMU 'cpu' which will be removed.
Invalid event (cycles:P) in per-thread mode, enable system wide with '-a'.
Error:
Failure to open any events for recording.
Fixes: c33aea446bf555ab ("perf tools: Fix precise_ip fallback logic")
Tested-by: Chun-Tse Shao <ctshao@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250410010252.402221-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a mutex around the PTM transaction to prevent multiple transactors
Multiple processes try to initiate a PTM transaction, one or all may
fail. This can be reproduced by running two instances of the
following:
$ sudo phc2sys -O 0 -i tsn0 -m
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
Note: Normally two instance of PHC2SYS will not run, but one process
should not break another.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Make sure that the PTP module is cleaned up if the igc_probe() fails by
calling igc_ptp_stop() on exit.
Fixes: d89f88419f99 ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
All functions in igc_ptp.c called from igc_main.c should check the
IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset
functions.
Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move ktime_get_snapshot() into the loop. If a retry does occur, a more
recent snapshot will result in a more accurate cross-timestamp.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The i225/i226 hardware retries if it receives an inappropriate response
from the upstream device. If the device retries too quickly, the root
port does not respond.
The wait between attempts was reduced from 10us to 1us in commit
6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which
said:
With the 10us interval, we were seeing PTM transactions take around
12us. Hardware team suggested this interval could be lowered to 1us
which was confirmed with PCIe sniffer. With the 1us interval, PTM
dialogs took around 2us.
While a 1us short cycle time was thought to be theoretically sufficient, it
turns out in practice it is not quite long enough. It is unclear if the
problem is in the root port or an issue in i225/i226.
Increase the wait from 1us to 4us. Increasing to 2us appeared to work in
practice on the setups we have available. A value of 4us was chosen due to
the limited hardware available for testing, with a goal of ensuring we wait
long enough without overly penalizing the response time when unnecessary.
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
Fixes: 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Writing to clear the PTM status 'valid' bit while the PTM cycle is
triggered results in unreliable PTM operation. To fix this, clear the
PTM 'trigger' and status after each PTM transaction.
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not 0, but extremely reduced.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for zpos, alpha and blend properties to RZ/G2L DU
driver as the IP supports all these properties.
It is tested by the below modetest commands:
modetest -M rzg2l-du -s 44@42:1920x1080@AR24 -d -P \
37@42:512x300+200+200@XR15
modetest -M rzg2l-du -w {32,37}:alpha:{0,65535}
modetest -M rzg2l-du -w {32,37}:zpos:{0,1}
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #On RZ/V2H
Link: https://lore.kernel.org/r/20250404133047.172080-1-biju.das.jz@bp.renesas.com
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The helper tests the dma_buf
itself while import_attach is just an artifact of the import. Prepares
to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250408115237.428985-1-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of cleanups for the error handling in the Freescale drivers"
* tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-spi: Remove redundant probe error message
spi: fsl-qspi: Fix double cleanup in probe error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa
driver (Henry)
* tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_sx4: Add error handling in pdc20621_i2c_read()
ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
|
|
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
|
|
This requirement was overeagerly loosened in commit 2f83e38a095f
("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), but as
it turns out,
(1) the logic I implemented there was inconsistent (apologies!),
(2) TIOCL_SELMOUSEREPORT might actually be a small security risk
after all, and
(3) TIOCL_SELMOUSEREPORT is only meant to be used by the mouse
daemon (GPM or Consolation), which runs as CAP_SYS_ADMIN
already.
In more detail:
1. The previous patch has inconsistent logic:
In commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes
without CAP_SYS_ADMIN"), we checked for sel_mode ==
TIOCL_SELMOUSEREPORT, but overlooked that the lower four bits of
this "mode" parameter were actually used as an additional way to
pass an argument. So the patch did actually still require
CAP_SYS_ADMIN, if any of the mouse button bits are set, but did not
require it if none of the mouse buttons bits are set.
This logic is inconsistent and was not intentional. We should have
the same policies for using TIOCL_SELMOUSEREPORT independent of the
value of the "hidden" mouse button argument.
I sent a separate documentation patch to the man page list with
more details on TIOCL_SELMOUSEREPORT:
https://lore.kernel.org/all/20250223091342.35523-2-gnoack3000@gmail.com/
2. TIOCL_SELMOUSEREPORT is indeed a potential security risk which can
let an attacker simulate "keyboard" input to command line
applications on the same terminal, like TIOCSTI and some other
TIOCLINUX "selection mode" IOCTLs.
By enabling mouse reporting on a terminal and then injecting mouse
reports through TIOCL_SELMOUSEREPORT, an attacker can simulate
mouse movements on the same terminal, similar to the TIOCSTI
keystroke injection attacks that were previously possible with
TIOCSTI and other TIOCL_SETSEL selection modes.
Many programs (including libreadline/bash) are then prone to
misinterpret these mouse reports as normal keyboard input because
they do not expect input in the X11 mouse protocol form. The
attacker does not have complete control over the escape sequence,
but they can at least control the values of two consecutive bytes
in the binary mouse reporting escape sequence.
I went into more detail on that in the discussion at
https://lore.kernel.org/all/20250221.0a947528d8f3@gnoack.org/
It is not equally trivial to simulate arbitrary keystrokes as it
was with TIOCSTI (commit 83efeeeb3d04 ("tty: Allow TIOCSTI to be
disabled")), but the general mechanism is there, and together with
the small number of existing legit use cases (see below), it would
be better to revert back to requiring CAP_SYS_ADMIN for
TIOCL_SELMOUSEREPORT, as it was already the case before
commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without
CAP_SYS_ADMIN").
3. TIOCL_SELMOUSEREPORT is only used by the mouse daemons (GPM or
Consolation), and they are the only legit use case:
To quote console_codes(4):
The mouse tracking facility is intended to return
xterm(1)-compatible mouse status reports. Because the console
driver has no way to know the device or type of the mouse, these
reports are returned in the console input stream only when the
virtual terminal driver receives a mouse update ioctl. These
ioctls must be generated by a mouse-aware user-mode application
such as the gpm(8) daemon.
Jared Finder has also confirmed in
https://lore.kernel.org/all/491f3df9de6593df8e70dbe77614b026@finder.org/
that Emacs does not call TIOCL_SELMOUSEREPORT directly, and it
would be difficult to find good reasons for doing that, given that
it would interfere with the reports that GPM is sending.
More information on the interaction between GPM, terminals and the
kernel with additional pointers is also available in this patch:
https://lore.kernel.org/all/a773e48920aa104a65073671effbdee665c105fc.1603963593.git.tammo.block@gmail.com/
For background on who else uses TIOCL_SELMOUSEREPORT: Debian Code
search finds one page of results, the only two known callers are
the two mouse daemons GPM and Consolation. (GPM does not show up
in the search results because it uses literal numbers to refer to
TIOCLINUX-related enums. I looked through GPM by hand instead.
TIOCL_SELMOUSEREPORT is also not used from libgpm.)
https://codesearch.debian.net/search?q=TIOCL_SELMOUSEREPORT
Cc: Jared Finder <jared@finder.org>
Cc: Jann Horn <jannh@google.com>
Cc: Hanno Böck <hanno@hboeck.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: stable <stable@kernel.org>
Fixes: 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN")
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20250411070144.3959-2-gnoack3000@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MSM UART DM controller supports different working modes, e.g. DMA or
the "single-character mode", where all reads/writes operate on a single
character rather than 4 chars (32-bit) at once. When using earlycon,
__msm_console_write() always writes 4 characters at a time, but we don't
know which mode the bootloader was using and we don't set the mode either.
This causes garbled output if the bootloader was using the single-character
mode, because only every 4th character appears in the serial console, e.g.
"[ 00oni pi 000xf0[ 00i s 5rm9(l)l s 1 1 SPMTA 7:C 5[ 00A ade k d[
00ano:ameoi .Q1B[ 00ac _idaM00080oo'"
If the bootloader was using the DMA ("DM") mode, output would likely fail
entirely. Later, when the full serial driver probes, the port is
re-initialized and output works as expected.
Fix this also for earlycon by clearing the DMEN register and
reset+re-enable the transmitter to apply the change. This ensures the
transmitter is in the expected state before writing any output.
Cc: stable <stable@kernel.org>
Fixes: 0efe72963409 ("tty: serial: msm: Add earlycon support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250408-msm-serial-earlycon-v1-1-429080127530@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 1c4b5ecb7ea1 ("remove the h8300 architecture") removed Renesas
TPU timer driver. Let's remove its binding.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/877c3vnq0k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Bring in overlayfs fixes for the current cycle.
* tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: remove unused forward declaration
ovl: don't allow datadir only
Link: https://lore.kernel.org/CAJfpegt-EE4RROKDXA3g5GxAYXQrWcLAL1TfTPK-%3DVmPC7U13g@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is not understandable without a comment on endianness
Fixes: afba937e540c9 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250401084749.175246-5-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
