summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-22ima: process_measurement() needlessly takes inode_lock() on MAY_READFrederick Lawler
On IMA policy update, if a measure rule exists in the policy, IMA_MEASURE is set for ima_policy_flags which makes the violation_check variable always true. Coupled with a no-action on MAY_READ for a FILE_CHECK call, we're always taking the inode_lock(). This becomes a performance problem for extremely heavy read-only workloads. Therefore, prevent this only in the case there's no action to be taken. Signed-off-by: Frederick Lawler <fred@cloudflare.com> Acked-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2025-04-22xfs: remove duplicate Zoned Filesystems sections in admin-guideHans Holmberg
Remove the duplicated section and while at it, turn spaces into tabs. Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Fixes: c7b67ddc3c99 ("xfs: document zoned rt specifics in admin-guide") Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-04-22XFS: fix zoned gc threshold math for 32-bit archesCarlos Maiolino
xfs_zoned_need_gc makes use of mult_frac() to calculate the threshold for triggering the zoned garbage collector, but, turns out mult_frac() doesn't properly work with 64-bit data types and this caused build failures on some 32-bit architectures. Fix this by essentially open coding mult_frac() in a 64-bit friendly way. Notice we don't need to bother with counters underflow here because xfs_estimate_freecounter() will always return a positive value, as it leverages percpu_counter_read_positive to read such counters. Fixes: 845abeb1f06a ("xfs: add tunable threshold parameter for triggering zone GC") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504181233.F7D9Atra-lkp@intel.com/ Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-04-22spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()Christophe JAILLET
If an error occurs after a successful stm32_ospi_dma_setup() call, some dma_release_channel() calls are needed to release some resources, as already done in the remove function. Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://patch.msgid.link/2674c8df1d05ab312826b69bfe9559f81d125a0b.1744975624.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-22drm/panel: make prepare/enable and disable/unprepare calls return voidDmitry Baryshkov
Now there are no users of the return value of the drm_panel_prepare(), drm_panel_unprepare(), drm_panel_enable() and drm_panel_disable() calls. Usually these calls are performed from the atomic callbacks, where it is impossible to return an error. Stop returning error codes and return void instead. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-7-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: ignore return values of drm_panel_* callsDmitry Baryshkov
Follow the example of other drivers and ignore return values of the drm_panel_prepare() / unprepare() / enable() / disable() calls. There is no possible error recovery, so the driver just logs a message. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-6-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: inline analogix_dp_prepare_panel()Dmitry Baryshkov
The analogix_dp_prepare_panel() is now only calling a corresponding drm_panel function. Inline it to simplify the code. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-5-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogic_dp: drop panel_lockDmitry Baryshkov
The analogix_dp_prepare_panel() function is called from bridge's atomic_pre_enable() and atomic_post_disable() callbacks, which can not happen simultaneously. Drop the useless mutex. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-4-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogic_dp: drop panel_is_modesetDmitry Baryshkov
The dp->panel_is_modeset is now a write-only field. Drop it completely. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-3-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: drop unused argument to analogix_dp_prepare_panel()Dmitry Baryshkov
After previous cleanup all calling sites pass true as is_modeset_prepare argument to analogix_dp_prepare_panel(). Drop dead code depending on that argument being false. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-2-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22drm/bridge: analogix_dp: drop extra calls to analogix_dp_prepare_panel()Dmitry Baryshkov
The analogix_dp_prepare_panel() returns immediately if there is no attached panel. Drop several calls to this function which are performed when dp->plat_data->panel is NULL. Tested-by: Damon Ding <damon.ding@rock-chips.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-1-93e1be33dc8d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-04-22net: lwtunnel: disable BHs when requiredJustin Iurman
In lwtunnel_{output|xmit}(), dev_xmit_recursion() may be called in preemptible scope for PREEMPT kernels. This patch disables BHs before calling dev_xmit_recursion(). BHs are re-enabled only at the end, since we must ensure the same CPU is used for both dev_xmit_recursion_inc() and dev_xmit_recursion_dec() (and any other recursion levels in some cases) in order to maintain valid per-cpu counters. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Closes: https://lore.kernel.org/netdev/CAADnVQJFWn3dBFJtY+ci6oN1pDFL=TzCmNbRgey7MdYxt_AP2g@mail.gmail.com/ Reported-by: Eduard Zingerman <eddyz87@gmail.com> Closes: https://lore.kernel.org/netdev/m2h62qwf34.fsf@gmail.com/ Fixes: 986ffb3a57c5 ("net: lwtunnel: fix recursion loops") Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250416160716.8823-1-justin.iurman@uliege.be Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22net: selftests: initialize TCP header and skb payload with zeroOleksij Rempel
Zero-initialize TCP header via memset() to avoid garbage values that may affect checksum or behavior during test transmission. Also zero-fill allocated payload and padding regions using memset() after skb_put(), ensuring deterministic content for all outgoing test packets. Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22dma-mapping: Fix warning reported for missing prototypeBalbir Singh
lkp reported a warning about missing prototype for a recent patch. The kernel-doc style comments are out of sync, move them to the right function. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Christoph Hellwig <hch@lst.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/ Signed-off-by: Balbir Singh <balbirs@nvidia.com> [mszyprow: reformatted subject] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
2025-04-22drm/amdgpu: update fence ptr with context:seqnoSunil Khatri
log context:seqno of the fence during timeout rather than logging fence pointer. Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/gfx12: Add fw minimum version check for usermode queueArvind Yadav
This patch is load usermode queue based on FW support for gfx12. CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123] v2: Addressed review comments from Alex - Just check the firmware versions directly. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Shashank Sharma <shashank.sharma@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/gfx11: Add fw minimum version check for usermode queueArvind Yadav
This patch is load usermode queue based on FW support for gfx11. CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120] v2: Addressed review comments from Alex. - Just check the firmware versions directly. v3: Firmware version checks only for Navi3x(by Alex). Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Shashank Sharma <shashank.sharma@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Add NULL pointer checks in dm_force_atomic_commit()Srinivasan Shanmugam
This commit updates the dm_force_atomic_commit function to replace the usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after retrieving the Connector (drm_atomic_get_connector_state), CRTC (drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state) states. The function utilized PTR_ERR_OR_ZERO for error checking. However, this approach is inappropriate in this context because the respective functions do not return NULL; they return pointers that encode errors. This change ensures that error pointers are properly checked using IS_ERR before attempting to dereference. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: use consistent function namingAlex Deucher
s/userqueue/userq/ 1. remove the mix of amdgpu_userqueue and amdgpu_userq 2. to be consistent with other amdgpu_userq_fence.c 3. it's shorter Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: rename eviction helpersAlex Deucher
suspend/resume -> evict/restore Rename to avoid confusion with the system suspend and resume helpers. v2: update error messages Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: move waiting for last fence before umapAlex Deucher
Need to wait for the last fence before unmapping. This also fixes a memory leak in amdgpu_userqueue_cleanup() when the fence isn't signalled. Fixes: b0db33c8c50f ("drm/amdgpu/userq: rework front end call sequence") Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: unmap queues amdgpu_userq_mgr_fini()Alex Deucher
This was missed when the map and unmap were split out of the mqd create and destroy functions. Fixes: b0db33c8c50f ("drm/amdgpu/userq: rework front end call sequence") Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu: switch from queue_active to queue stateAlex Deucher
Track the state of the queue rather than simple active vs not. This is needed for other states (hung, preempted, etc.). While we are at it, move the state tracking into the user queue front end code. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: optimize enforce isolation and s/rAlex Deucher
If user queues are disabled for all IPs in the case of suspend and resume and for gfx/compute in the case of enforce isolation, we can return early. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Remove unused *vbios_smu_set_dprefclkDr. David Alan Gilbert
rn_vbios_smu_set_dprefclk() was added in 2019 by commit 4edb6fc91878 ("drm/amd/display: Add Renoir clock manager") rv1_vbios_smu_set_dprefclk() was also added in 2019 by commit dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") neither have been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/radeon: Remove unused radeon_fence_wait_anyDr. David Alan Gilbert
radeon_fence_wait_any() last use was removed in 2023's commit 254986e324ad ("drm/radeon: Use the drm suballocation manager implementation.") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/radeon/radeon_audio: Remove unused r600_hdmi_audio_workaroundDr. David Alan Gilbert
The last use of r600_hdmi_audio_workaround() was removed by 2014's commit 6e72376dcc66 ("radeon/audio: consolidate audio_mode_set() functions") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu: Print kernel message when error logged by scrubXiang Liu
Print a kernel message when the scrub bit of status register is set to indicate that errors are being logged by the scrub. Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: do not copy invalid CRTC timing infoGergo Koteles
Since b255ce4388e0, it is possible that the CRTC timing information for the preferred mode has not yet been calculated while amdgpu_dm_connector_mode_valid() is running. In this case use the CRTC timing information of the actual mode. Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()") Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085 Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Correct prefetch calculationTungYu Lu
[Why] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [How] Add the min operation of dst_y_prefetch_equ in prefetch calculation for legacy DML. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: TungYu Lu <tungyu.lu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: add a helper to check which IPs are enabledAlex Deucher
Add a helper to get a mask of IPs which support user queues. Use this in the INFO IOCTL to get the IP mask to replace the current code. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu: Add queue id support to the user queue wait IOCTLArunpravin Paneer Selvam
Add queue id support to the user queue wait IOCTL drm_amdgpu_userq_wait structure. This is required to retrieve the wait user queue and maintain the fence driver references in it so that the user queue in the same context releases their reference to the fence drivers at some point before queue destruction. Otherwise, we would gather those references until we don't have any more space left and crash. v2: Modify the UAPI comment as per the mesa and libdrm UAPI comment. Libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/408 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34493 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq: enable support for secure queuesAlex Deucher
Enable users to create secure GFX/compute queues. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Tested-by: Jesse.Zhang <Jesse.zhang@amd.com> Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/userq/mes: pass the secure flag to mqd initAlex Deucher
So that we initialize the MQD as a secure queue. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Fix pixel rate divider policy for 1 pixel per cycle configMeenakshikumar Somasundaram
[Why] Pixel rate dividor was not programmed correctly for 1 pixel per cycle configuration for empty tu case. [How] Included check for empty tu when pixel rate dividor values were selected. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFFLeo Li
[Why] Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG. RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit. [How] Remove previous logic that checked for IPS2 support, and just default to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`. Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Revert "not disable dtb as dto src at dpms off"Charlene Liu
[why] not all the asic using the same code path. need to revisit and limit the impact. This reverts commit 32be4e39f459f3ac9c191569ae8e3731cb82f7ab. Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinksGeorge Shen
[Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Fix ACPI edid parsing on some Lenovo systemsMario Limonciello
[Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com> Reported-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: David Ober <dober@lenovo.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Promote DC to 3.2.329Taimur Hassan
Summary: * Implement HDMI Read request * RMCM and MCM 3DLUT support * Enable urgent latency adjustment on DCN35 * Enable phy-ssc reduction by default Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/i915/pch: abstract fake PCH detection betterJani Nikula
Abstract detection of platforms with south display on the same PCI device or SoC die as north display, and all around clarify what this means. Debug log about it for good measure. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/95cd619b63a81a0a7f8c73a64694da9d41e3a575.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22drm/i915/display: drop lots of unnecessary #include i915_drv.hJani Nikula
With the PCH macros switched to use struct intel_display, we have a number of files that no longer need struct drm_i915_private or anything else from i915_drv.h anymore. Remove the #include, and add the missing includes that were previously implicit. v2: Drop even more of the includes Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/5dc9e6a98461c344febac4c645875d8688eba906.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22drm/i915/display: pass struct intel_display to PCH macrosJani Nikula
Now that INTEL_PCH_TYPE() and HAS_PCH_*() macros are under display, and accept a struct intel_display pointer, use that instead of struct drm_i915_private pointer in display code. This is done naively by running: $ sed -i 's/\(INTEL_PCH_TYPE\|HAS_PCH_[A-Z0-9_-]*\)([^)]*)/\1(display)/g' \ $(find drivers/gpu/drm/i915/display -name "*.c") and fixing the fallout, i.e. removing unused local i915 variables and adding display variables where needed. v2: Rebase Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/999f4d7b8ed11739b1c5ec8d6408fc39d5e3776b.1744880985.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22net: phy: microchip: force IRQ polling mode for lan88xxFiona Klute
With lan88xx based devices the lan78xx driver can get stuck in an interrupt loop while bringing the device up, flooding the kernel log with messages like the following: lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped Removing interrupt support from the lan88xx PHY driver forces the driver to use polling instead, which avoids the problem. The issue has been observed with Raspberry Pi devices at least since 4.14 (see [1], bug report for their downstream kernel), as well as with Nvidia devices [2] in 2020, where disabling interrupts was the vendor-suggested workaround (together with the claim that phylib changes in 4.9 made the interrupt handling in lan78xx incompatible). Iperf reports well over 900Mbits/sec per direction with client in --dualtest mode, so there does not seem to be a significant impact on throughput (lan88xx device connected via switch to the peer). [1] https://github.com/raspberrypi/linux/issues/2447 [2] https://forums.developer.nvidia.com/t/jetson-xavier-and-lan7800-problem/142134/11 Link: https://lore.kernel.org/0901d90d-3f20-4a10-b680-9c978e04ddda@lunn.ch Fixes: 792aec47d59d ("add microchip LAN88xx phy driver") Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Cc: kernel-list@raspberrypi.com Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250416102413.30654-1-fiona.klute@gmx.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-22drm: renesas: rz-du: rzg2l_mipi_dsi: Update the comment in ↵Biju Das
rzg2l_mipi_dsi_start_video() Add missing space in the comment in rzg2l_mipi_dsi_start_video(). Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZPg7STHDn4LbLy7f@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20250412061258.5447-1-biju.das.jz@bp.renesas.com
2025-04-22drm/panthor: Don't create a file offset for NO_MMAP BOsBoris Brezillon
Right now the DRM_PANTHOR_BO_NO_MMAP flag is ignored by panthor_ioctl_bo_mmap_offset(), meaning BOs with this flag set can have a file offset but can't be mapped anyway, because panthor_gem_mmap() will filter them out. If we error out at mmap_offset creation time, we can get rid of panthor_gem_mmap() and call drm_gem_shmem_object_mmap directly, and we get rid of this inconsistency of having an mmap offset for a BO that can never be mmap-ed. Changes in v2: - Get rid of panthor_gem_mmap() - Get rid of the Fixes tag and adjust the commit message accordingly - Return ENOPERM instead of EINVAL Changes in v3: - Don't leak the BO ref - Add R-bs Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com> Link: https://lore.kernel.org/r/20250417121942.3574111-1-boris.brezillon@collabora.com Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2025-04-22drm/i915/pxp: fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'Chen Linxuan
On x86_64 with gcc version 13.3.0, I compile kernel with: make defconfig ./scripts/kconfig/merge_config.sh .config <( echo CONFIG_COMPILE_TEST=y ) make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once" Then I get a linker error: ld: vmlinux.o: in function `pxp_fw_dependencies_completed': kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions' This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions() header stub for CONFIG_DRM_I915_PXP=n. Add it. Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com> Fixes: 99afb7cc8c44 ("drm/i915/pxp: Add ARB session creation and cleanup") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit b484c1e225a6a582fc78c4d7af7b286408bb7d41) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-04-22nvmet: fix out-of-bounds access in nvmet_enable_portRichard Weinberger
When trying to enable a port that has no transport configured yet, nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports array, causing an out-of-bounds access: [ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da [ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632 [...] [ 106.076026] nvmet: transport type 255 not supported Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by nvmet_ports_make(). Avoid this by checking for NVMF_TRTYPE_MAX before proceeding. Fixes: 200adac75888 ("nvme: Add PCI transport type") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2025-04-22drm: panel: jd9365da: fix reset signal polarity in unprepareHugo Villeneuve
commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare(). It was not done in jadard_unprepare() because of an incorrect assumption about reset line handling in power off mode. After looking into the datasheet, it now appears that before disabling regulators, the reset line is deasserted first, and if reset_before_power_off_vcioo is true, then the reset line is asserted. Fix reset polarity by inverting gpiod_set_value() second argument in in jadard_unprepare(). Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel") Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com
generated by cgit (git 2.34.1) at 2025-09-13 15:24:29 +0000