| Age | Commit message (Collapse) | Author |
|---|
|
s390 defconfig does not have BPF LSM, resulting in
systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
with the respective kernels. The other architectures do not explicitly
set it, and the default values have BPF in them, so just drop it.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull tomoyo fixes from Tetsuo Handa:
"Redo of pathname patternization and fix spelling errors"
* tag 'tomoyo-pr-20250211' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: use better patterns for procfs in learning mode
tomoyo: fix spelling errors
tomoyo: fix spelling error
|
|
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1]
Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2]
Reported-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Patrick Bellasi <derkling@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Lenovo Thinkpad T14s Gen6 Snapdragon is currently sold with three
different panel versions: OLED, Low Power IPS or IPS with Touchscreen.
My Low Power IPS version had this panel and the kernel complained
about not knowing any details. I don't have any panel documentation,
but as far as I can see the same timings for the already supported
CSO panel also work for this one.
The raw EDID is:
00 ff ff ff ff ff ff 00 0e 6f 13 14 00 00 00 00
00 1e 01 04 a5 1e 13 78 03 82 53 a4 55 4d 9b 24
0d 51 55 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 35 3c 80 a0 70 b0 23 40 30 20
36 00 2e bd 10 00 00 18 00 00 00 fd 00 30 3c 4a
4a 0f 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
53 4f 54 20 54 33 0a 20 20 20 20 20 00 00 00 fe
00 4d 4e 45 30 30 37 4a 41 31 2d 32 0a 20 00 8b
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211014314.94429-1-sre@ring0.de
|
|
Convert the remaining intel_display_power.h interfaces to
take struct intel_display instead of struct drm_i915_private.
intel_display_power.c still has some internal uses due to
i915->runtime_pm.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Looks like I missed one of myriad CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n
special cases when converting the intel_display_power_{get,put}()
code to use struct intel_display. Only noticed after the fact
when building a EXPERT=n kernel :/
Fixes: 5dcfda5cfa42 ("drm/i915: Convert intel_display_power_{get,put}*() to intel_display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the
igc_init_empty_frame function. This ensures that the buffer type is
correctly identified and handled during Tx ring cleanup.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes HW RX timestamp in the following scenario:
- AF_PACKET socket with enabled HW RX timestamps is created
- AF_XDP socket with enabled zero copy is created
- frame is forwarded to the BPF program, where the timestamp should
still be readable (extracted by igc_xdp_rx_timestamp(), kfunc
behind bpf_xdp_metadata_rx_timestamp())
- the frame got XDP_PASS from BPF program, redirecting to the stack
- AF_PACKET socket receives the frame with HW RX timestamp
Moves the skb timestamp setting from igc_dispatch_skb_zc() to
igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to
igc_construct_skb().
This issue can also be reproduced by running:
# tools/testing/selftests/bpf/xdp_hw_metadata enp1s0
When a frame with the wrong port 9092 (instead of 9091) is used:
# echo -n xdp | nc -u -q1 192.168.10.9 9092
then the RX timestamp is missing and xdp_hw_metadata prints:
skb hwtstamp is not found!
With this fix or when copy mode is used:
# tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0
then RX timestamp is found and xdp_hw_metadata prints:
found skb hwtstamp = 1736509937.852786132
Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in
ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status
encoding. Propagate this logic to the ixgbe_put_rx_buffer().
The commit also relaxed the skb NULL pointer check - caught by Smatch.
Restore this check.
Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields()
so that RX queue is recorded for RSC packets too.
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This reverts commit cd7a38c40b231350a3cd0fd774f4e6bb68c4b411.
When submitting the change above, it was thought that the origin of the
init_data should be a clear choice, from the driver or from DT but not
both.
It turns out some devices, such as qcom-msm8974-lge-nexus5-hammerhead,
relied on the old behaviour to override the init_data provided by the
driver, making it some kind of default if none is provided by the platform.
Using the init_data provided by the driver when it is present broke these
devices so revert the change to fixup the situation and add a comment
to make things a bit more clear
Reported-by: Luca Weiss <luca@lucaweiss.eu>
Closes: https://lore.kernel.org/lkml/5857103.DvuYhMxLoT@lucaweiss.eu
Fixes: cd7a38c40b23 ("regulator: core: do not silently ignore provided init_data")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20250211-regulator-init-data-fixup-v1-1-5ce1c6cff990@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several MeiG Smart modems apparently use the same product id, making the
defines even less useful.
Drop them in favour of using comments consistently to make the id table
slightly less unwieldy.
Cc: stable@vger.kernel.org
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
want_new_bset() returns the address of a new bset to initialize if we
wish to do so in a btree node - either because the previous one is too
big, or because it's been written.
The case for 'previous bset was written' was wrong: it's only supposed
to check for if we have space in the node for one more block, but
because it subtracted the header from the space available it would never
initialize a new bset if we were down to the last block in a node.
Fixing this results in fewer btree node splits/compactions, which fixes
a bug with flushing the journal to go read-only sometimes not
terminating or taking excessively long.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This lets us flush the journal to go read-only more effectively.
Flushing the journal and going read-only requires halting mutually
recursive processes, which strictly speaking are not guaranteed to
terminate.
Flushing btree node journal pins will kick off a btree node write, and
btree node writes on completion must do another btree update to the
parent node to update the 'sectors_written' field for that node's key.
If the parent node is full and requires a split or compaction, that's
going to generate a whole bunch of additional btree updates - alloc
info, LRU btree, and more - which then have to be flushed, and the cycle
repeats.
This process will terminate much more effectively if we tweak journal
reclaim to flush btree updates leaf to root: i.e., don't flush updates
for a given btree node (kicking off a write, and consuming space within
that node up to the next block boundary) if there might still be
unflushed updates in child nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
acc->k.data should be used with the lock hold:
00221 ========= TEST generic/187
00221 run fstests generic/187 at 2025-02-09 21:08:10
00221 spectre-v4 mitigation disabled by command-line option
00222 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro
00222 bcachefs (vdc): initializing new filesystem
00222 bcachefs (vdc): going read-write
00222 bcachefs (vdc): marking superblocks
00222 bcachefs (vdc): initializing freespace
00222 bcachefs (vdc): done initializing freespace
00222 bcachefs (vdc): reading snapshots table
00222 bcachefs (vdc): reading snapshots done
00222 bcachefs (vdc): done starting filesystem
00222 bcachefs (vdc): shutting down
00222 bcachefs (vdc): going read-only
00222 bcachefs (vdc): finished waiting for writes to stop
00223 bcachefs (vdc): flushing journal and stopping allocators, journal seq 6
00223 bcachefs (vdc): flushing journal and stopping allocators complete, journal seq 8
00223 bcachefs (vdc): clean shutdown complete, journal seq 9
00223 bcachefs (vdc): marking filesystem clean
00223 bcachefs (vdc): shutdown complete
00223 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro
00223 bcachefs (vdc): initializing new filesystem
00223 bcachefs (vdc): going read-write
00223 bcachefs (vdc): marking superblocks
00223 bcachefs (vdc): initializing freespace
00223 bcachefs (vdc): done initializing freespace
00223 bcachefs (vdc): reading snapshots table
00223 bcachefs (vdc): reading snapshots done
00223 bcachefs (vdc): done starting filesystem
00244 hrtimer: interrupt took 123350440 ns
00264 bcachefs (vdc): shutting down
00264 bcachefs (vdc): going read-only
00264 bcachefs (vdc): finished waiting for writes to stop
00264 bcachefs (vdc): flushing journal and stopping allocators, journal seq 97
00265 bcachefs (vdc): flushing journal and stopping allocators complete, journal seq 101
00265 bcachefs (vdc): clean shutdown complete, journal seq 102
00265 bcachefs (vdc): marking filesystem clean
00265 bcachefs (vdc): shutdown complete
00265 bcachefs (vdc): starting version 1.20: directory_size opts=errors=ro
00265 bcachefs (vdc): recovering from clean shutdown, journal seq 102
00265 bcachefs (vdc): accounting_read...
00265 ==================================================================
00265 done
00265 BUG: KASAN: slab-use-after-free in bch2_fs_to_text+0x12b4/0x1728
00265 bcachefs (vdc): alloc_read... done
00265 bcachefs (vdc): stripes_read... done
00265 Read of size 4 at addr ffffff80c57eac00 by task cat/7531
00265 bcachefs (vdc): snapshots_read... done
00265
00265 CPU: 6 UID: 0 PID: 7531 Comm: cat Not tainted 6.13.0-rc3-ktest-g16fc6fa3819d #14103
00265 Hardware name: linux,dummy-virt (DT)
00265 Call trace:
00265 show_stack+0x1c/0x30 (C)
00265 dump_stack_lvl+0x6c/0x80
00265 print_report+0xf8/0x5d8
00265 kasan_report+0x90/0xd0
00265 __asan_report_load4_noabort+0x1c/0x28
00265 bch2_fs_to_text+0x12b4/0x1728
00265 bch2_fs_show+0x94/0x188
00265 sysfs_kf_seq_show+0x1a4/0x348
00265 kernfs_seq_show+0x12c/0x198
00265 seq_read_iter+0x27c/0xfd0
00265 kernfs_fop_read_iter+0x390/0x4f8
00265 vfs_read+0x480/0x7f0
00265 ksys_read+0xe0/0x1e8
00265 __arm64_sys_read+0x70/0xa8
00265 invoke_syscall.constprop.0+0x74/0x1e8
00265 do_el0_svc+0xc8/0x1c8
00265 el0_svc+0x20/0x60
00265 el0t_64_sync_handler+0x104/0x130
00265 el0t_64_sync+0x154/0x158
00265
00265 Allocated by task 7510:
00265 kasan_save_stack+0x28/0x50
00265 kasan_save_track+0x1c/0x38
00265 kasan_save_alloc_info+0x3c/0x50
00265 __kasan_kmalloc+0xac/0xb0
00265 __kmalloc_node_noprof+0x168/0x348
00265 __kvmalloc_node_noprof+0x20/0x140
00265 __bch2_darray_resize_noprof+0x90/0x1b0
00265 __bch2_accounting_mem_insert+0x76c/0xb08
00265 bch2_accounting_mem_insert+0x224/0x3b8
00265 bch2_accounting_mem_mod_locked+0x480/0xc58
00265 bch2_accounting_read+0xa94/0x3eb8
00265 bch2_run_recovery_pass+0x80/0x178
00265 bch2_run_recovery_passes+0x340/0x698
00265 bch2_fs_recovery+0x1c98/0x2bd8
00265 bch2_fs_start+0x240/0x490
00265 bch2_fs_get_tree+0xe1c/0x1458
00265 vfs_get_tree+0x7c/0x250
00265 path_mount+0xe24/0x1648
00265 __arm64_sys_mount+0x240/0x438
00265 invoke_syscall.constprop.0+0x74/0x1e8
00265 do_el0_svc+0xc8/0x1c8
00265 el0_svc+0x20/0x60
00265 el0t_64_sync_handler+0x104/0x130
00265 el0t_64_sync+0x154/0x158
00265
00265 Freed by task 7510:
00265 kasan_save_stack+0x28/0x50
00265 kasan_save_track+0x1c/0x38
00265 kasan_save_free_info+0x48/0x88
00265 __kasan_slab_free+0x48/0x60
00265 kfree+0x188/0x408
00265 kvfree+0x3c/0x50
00265 __bch2_darray_resize_noprof+0xe0/0x1b0
00265 __bch2_accounting_mem_insert+0x76c/0xb08
00265 bch2_accounting_mem_insert+0x224/0x3b8
00265 bch2_accounting_mem_mod_locked+0x480/0xc58
00265 bch2_accounting_read+0xa94/0x3eb8
00265 bch2_run_recovery_pass+0x80/0x178
00265 bch2_run_recovery_passes+0x340/0x698
00265 bch2_fs_recovery+0x1c98/0x2bd8
00265 bch2_fs_start+0x240/0x490
00265 bch2_fs_get_tree+0xe1c/0x1458
00265 vfs_get_tree+0x7c/0x250
00265 path_mount+0xe24/0x1648
00265 bcachefs (vdc): going read-write
00265 __arm64_sys_mount+0x240/0x438
00265 invoke_syscall.constprop.0+0x74/0x1e8
00265 do_el0_svc+0xc8/0x1c8
00265 el0_svc+0x20/0x60
00265 el0t_64_sync_handler+0x104/0x130
00265 el0t_64_sync+0x154/0x158
00265
00265 The buggy address belongs to the object at ffffff80c57eac00
00265 which belongs to the cache kmalloc-128 of size 128
00265 The buggy address is located 0 bytes inside of
00265 freed 128-byte region [ffffff80c57eac00, ffffff80c57eac80)
00265
00265 The buggy address belongs to the physical page:
00265 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1057ea
00265 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
00265 flags: 0x8000000000000040(head|zone=2)
00265 page_type: f5(slab)
00265 raw: 8000000000000040 ffffff80c0002800 dead000000000100 dead000000000122
00265 raw: 0000000000000000 0000000000200020 00000001f5000000 ffffff80c57a6400
00265 head: 8000000000000040 ffffff80c0002800 dead000000000100 dead000000000122
00265 head: 0000000000000000 0000000000200020 00000001f5000000 ffffff80c57a6400
00265 head: 8000000000000001 fffffffec315fa81 ffffffffffffffff 0000000000000000
00265 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
00265 page dumped because: kasan: bad access detected
00265
00265 Memory state around the buggy address:
00265 ffffff80c57eab00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00265 ffffff80c57eab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
00265 >ffffff80c57eac00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
00265 ^
00265 ffffff80c57eac80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
00265 ffffff80c57ead00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
00265 ==================================================================
00265 Kernel panic - not syncing: kasan.fault=panic set ...
00265 CPU: 6 UID: 0 PID: 7531 Comm: cat Not tainted 6.13.0-rc3-ktest-g16fc6fa3819d #14103
00265 Hardware name: linux,dummy-virt (DT)
00265 Call trace:
00265 show_stack+0x1c/0x30 (C)
00265 dump_stack_lvl+0x30/0x80
00265 dump_stack+0x18/0x20
00265 panic+0x4d4/0x518
00265 start_report.constprop.0+0x0/0x90
00265 kasan_report+0xa0/0xd0
00265 __asan_report_load4_noabort+0x1c/0x28
00265 bch2_fs_to_text+0x12b4/0x1728
00265 bch2_fs_show+0x94/0x188
00265 sysfs_kf_seq_show+0x1a4/0x348
00265 kernfs_seq_show+0x12c/0x198
00265 seq_read_iter+0x27c/0xfd0
00265 kernfs_fop_read_iter+0x390/0x4f8
00265 vfs_read+0x480/0x7f0
00265 ksys_read+0xe0/0x1e8
00265 __arm64_sys_read+0x70/0xa8
00265 invoke_syscall.constprop.0+0x74/0x1e8
00265 do_el0_svc+0xc8/0x1c8
00265 el0_svc+0x20/0x60
00265 el0t_64_sync_handler+0x104/0x130
00265 el0t_64_sync+0x154/0x158
00265 SMP: stopping secondary CPUs
00265 Kernel Offset: disabled
00265 CPU features: 0x000,00000070,00000010,8240500b
00265 Memory Limit: none
00265 ---[ end Kernel panic - not syncing: kasan.fault=panic set ... ]---
00270 ========= FAILED TIMEOUT generic.187 in 1200s
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The correct name for FN990 is FN990A so use it in order to avoid
confusion with FN990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the following Telit Cinterion FN990B40 compositions:
0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Commit ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a
"syscon" compatible") broke drivers which call device_node_to_regmap()
on nodes without a "syscon" compatible. Restore the prior behavior for
device_node_to_regmap().
This also makes using device_node_to_regmap() incompatible with
of_syscon_register_regmap() again, so add kerneldoc for
device_node_to_regmap() and syscon_node_to_regmap() to make it clear
how and when each one should be used.
Fixes: ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a "syscon" compatible")
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nishanth Menon <nm@ti.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250124191644.2309790-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The
"Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03"
interfaces respond to AT commands. Add these interfaces.
The product ID the modem uses is shared across multiple modems. Therefore,
add comments to describe which interface is used for which modem.
T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev=05.04
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=4da7ec42
C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/20250124-for-johan-meig-slm828-v2-1-6b4cd3f6344f@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Because firmware issue of platform, found spi device is not stable,
so add status check before firmware download, and remove some
operations which is not must in current stage.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Link: https://patch.msgid.link/20250211083941.5574-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
devm_kasprintf() calls can return null pointers on failure.
But some return values were not checked in zynqmp_audio_init().
Add NULL check in zynqmp_audio_init(), avoid referencing null
pointers in the subsequent code.
Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211102049.6468-1-hanchunchao@inspur.com
|
|
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
|
|
Fix broken config in qcom_param_page_type_exec caused by copy-paste error
from commit 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
In qcom_param_page_type_exec the value needs to be set to
nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused
the Qcom NANDC driver to malfunction on any device that makes use of it
(IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error:
[ 0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
[ 0.885909] nand: Micron NAND 256MiB 1,8V 8-bit
[ 0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB
[ 0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible
[ 0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel
[ 0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28
Restore original configuration fix the problem and makes the driver work
again.
Also restore the wrongly dropped cpu_to_le32 to correctly support BE
systems.
Cc: stable@vger.kernel.org
Fixes: 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
Tested-by: Robert Marko <robimarko@gmail.com> # IPQ8074 and IPQ6018
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
- Added the new device ID
- Added new pll algorithm
Signed-off-by: Gwenael Georgeault <ggeorgea@matrox.com>
Co-authored-by: Mamadou Insa Diop <mdiop@matrox.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.LFD.2.00.2502071401180.14188@pluton.matrox.com
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix panic during interface removal in BATMAN V, by Andy Strohman
- Cleanup BATMAN V/ELP metric handling, by Sven Eckelmann (2 patches)
- Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1(),
by Remi Pommarel
* tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()
batman-adv: Drop unmanaged ELP metric worker
batman-adv: Ignore neighbor throughput metrics in error case
batman-adv: fix panic during interface removal
====================
Link: https://patch.msgid.link/20250207095823.26043-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
says:
====================
ptp: vmclock: bugfixes and cleanups for error handling
Some error handling issues I noticed while looking at the code.
Only compile-tested.
v1: https://lore.kernel.org/r/20250206-vmclock-probe-v1-0-17a3ea07be34@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
====================
Link: https://patch.msgid.link/20250207-vmclock-probe-v2-0-bc2fce0bdf07@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vmclock_probe() uses an "out:" label to return from the function on
error. This indicates that some cleanup operation is necessary.
However the label does not do anything as all resources are managed
through devres, making the code slightly harder to read.
Remove the label and just return directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most resources owned by the vmclock device are managed through devres.
Only the miscdev and ptp clock are managed manually.
This makes the code slightly harder to understand than necessary.
Switch them over to devres and remove the now unnecessary drvdata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vmclock_remove() tries to detect the successful registration of the misc
device based on the value of its minor value.
However that check is incorrect if the misc device registration was not
attempted in the first place.
Always initialize the minor number, so the check works properly.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing newline to the format string of the "Couldn't get IRQ
for bank..." error message.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
Fixes: bdb93c03c550 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Validate each display mode against the astdp transmitter chips. Filters
out modes that the chip does not support.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-5-tzimmermann@suse.de
|
|
Look up the mode index for the astdp transmitter ship in the encoder's
atomic check and report an error if the display mode is not supported.
The lookup uses the DRM display mode instead of the driver's internal
VBIOS mode. Both are equivalent. The modesetting code later reads
the calculated index from the connector state to avoid recalculating it.
v2:
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-4-tzimmermann@suse.de
|
|
Programming the astdp transmitter chip requires a magic value for
individual modes. Inline the helper for calculating the value into
its only caller (i.e., the encoder's atomic_mode_set).
With further refactoring, the atomic check will be able to detect
invalid modes before attempting to program them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-3-tzimmermann@suse.de
|
|
Add dedicated connector state for ASTDP connectors. The state will
store values for programming the transmitter chip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-2-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-02-08
The first patch is by Reyders Morales and fixes a code example in the
CAN ISO15765-2 documentation.
The next patch is contributed by Alexander Hölzl and fixes sending of
J1939 messages with zero data length.
Fedor Pchelkin's patch for the ctucanfd driver adds a missing handling
for an skb allocation error.
Krzysztof Kozlowski contributes a patch for the c_can driver to fix
unbalanced runtime PM disable in error path.
The next patch is by Vincent Mailhol and fixes a NULL pointer
dereference on udev->serial in the etas_es58x driver.
The patch is by Robin van der Gracht and fixes the handling for an skb
allocation error.
* tag 'linux-can-fixes-for-6.14-20250208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
can: c_can: fix unbalanced runtime PM disable in error path
can: ctucanfd: handle skb allocation failure
can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero
Documentation/networking: fix basic node example document ISO 15765-2
====================
Link: https://patch.msgid.link/20250208115120.237274-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: second round to use dev_net_rcu()
dev_net(dev) should either be protected by RTNL or RCU.
There is no LOCKDEP support yet for this helper.
Adding it would trigger too many splats.
This second series fixes some of them.
====================
Link: https://patch.msgid.link/20250207135841.1948589-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF.
Fixes: 1762f7e88eb3 ("[NETNS][IPV6] ndisc - make socket control per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ovs_vport_cmd_fill_info() can be called without RTNL or RCU.
Use RCU protection and dev_net_rcu() to avoid potential UAF.
Fixes: 9354d4520342 ("openvswitch: reliable interface indentification in port dumps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
