summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-09mwifiex: add PCIe function level reset supportAmitkumar Karwar
This patch implements pre and post FLR handlers to support PCIe FLR functionality. Software cleanup is performed in pre-FLR whereas firmware is downloaded and software is re-initialised in post-FLR handler. Following command triggers FLR. echo "1" > /sys/bus/pci/devices/$NUMBER/reset This feature can be used as a recovery mechanism when firmware gets hang. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09brcmfmac: sdio: shorten retry loop in brcmf_sdio_kso_control()Arend Van Spriel
In brcmf_sdio_kso_control() there is a retry loop as hardware may take time to settle. However, when the call to brcmf_sdiod_regrb() returns an error it is due to SDIO access failure and it makes no sense to wait for hardware to settle. This patch aborts the loop after a number of subsequent access errors. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09brcmfmac: add support for bcm4339 chip with modalias sdio:c00v02D0d4339Arend Van Spriel
The driver already supports the bcm4339 chipset but only for the variant that shares the same modalias as the bcm4335, ie. sdio:c00v02D0d4335. It turns out that there are also bcm4339 devices out there that have a more distiguishable modalias sdio:c00v02D0d4339. Reported-by: Steve deRosier <derosier@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09mt7601u: use linux/bitfield.hJakub Kicinski
Use the newly added linux/bitfield.h. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09mt7601u: remove unnecessary includeJakub Kicinski
There is no need to include linux/version.h in a in-tree driver. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09mt7601u: remove redefinition of GENMASKJakub Kicinski
Remove redefinition of GENMASK which should not be there in the upstream version of the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09add basic register-field manipulation macrosJakub Kicinski
Common approach to accessing register fields is to define structures or sets of macros containing mask and shift pair. Operations on the register are then performed as follows: field = (reg >> shift) & mask; reg &= ~(mask << shift); reg |= (field & mask) << shift; Defining shift and mask separately is tedious. Ivo van Doorn came up with an idea of computing them at compilation time based on a single shifted mask (later refined by Felix) which can be used like this: #define REG_FIELD 0x000ff000 field = FIELD_GET(REG_FIELD, reg); reg &= ~REG_FIELD; reg |= FIELD_PREP(REG_FIELD, field); FIELD_{GET,PREP} macros take care of finding out what the appropriate shift is based on compilation time ffs operation. GENMASK can be used to define registers (which is usually less error-prone and easier to match with datasheets). This approach is the most convenient I've seen so to limit code multiplication let's move the macros to a global header file. Attempts to use static inlines instead of macros failed due to false positive triggering of BUILD_BUG_ON()s, especially with GCC < 6.0. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09mwifiex: add cfg80211 testmode supportXinming Hu
This patch adds cfg80211 testmode support so that userspace tools can download necessary commands to firmware during manufacturing mode tests. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09mwifiex: add manufacturing mode supportXinming Hu
By default normal mode is chosen when driver is loaded. This patch adds a provision to choose manufacturing mode via module parameters. Below command loads driver in manufacturing mode insmod mwifiex.ko mfg_mode=1. Tested-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09bcma: use of_dma_configure() to set initial dma maskArnd Bergmann
While fixing another bug, I noticed that bcma manually sets up a dma_mask pointer for its child devices. We have a generic helper for that now, which should be able to cope better with any variations that might be needed to deal with cache coherency, unusual DMA address offsets, iommus, or limited DMA masks, none of which are currently handled here. This changes the core to use the of_dma_configure(), like we do for platform devices that are probed directly from DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09xfrm: fix header file comment reference to struct xfrm_replay_state_esnRichard Guy Briggs
Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Richard Guy Briggs <rgb@tricolour.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-09vti: use right inner_mode for inbound inter address family policy checksthomas.zeitlhofer+lkml@ze-it.at
In case of inter address family tunneling (IPv6 over vti4 or IPv4 over vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are using the wrong address family. As a result, all inbound inter address family traffic is dropped. Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the inner_mode that contains the right address family for the inbound policy checks. Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-09xfrm_user: propagate sec ctx allocation errorsMathias Krause
When we fail to attach the security context in xfrm_state_construct() we'll return 0 as error value which, in turn, will wrongly claim success to userland when, in fact, we won't be adding / updating the XFRM state. This is a regression introduced by commit fd21150a0fe1 ("[XFRM] netlink: Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()"). Fix it by propagating the error returned by security_xfrm_state_alloc() in this case. Fixes: fd21150a0fe1 ("[XFRM] netlink: Inline attach_encap_tmpl()...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-08ipv4: accept u8 in IP_TOS ancillary dataEric Dumazet
In commit f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Francesco added IP_TOS values specified as integer. However, kernel sends to userspace (at recvmsg() time) an IP_TOS value in a single byte, when IP_RECVTOS is set on the socket. It can be very useful to reflect all ancillary options as given by the kernel in a subsequent sendmsg(), instead of aborting the sendmsg() with EINVAL after Francesco patch. So this patch extends IP_TOS ancillary to accept an u8, so that an UDP server can simply reuse same ancillary block without having to mangle it. Jesper can then augment https://github.com/netoptimizer/network-testing/blob/master/src/udp_example02.c to add TOS reflection ;) Fixes: f02db315b8d8 ("ipv4: IP_TOS and IP_TTL can be specified as ancillary data") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Fusco <ffusco@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08bpf: fix range propagation on direct packet accessDaniel Borkmann
LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: use an RB tree for ooo receive queueYaogong Wang
Over the years, TCP BDP has increased by several orders of magnitude, and some people are considering to reach the 2 Gbytes limit. Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000 MSS. In presence of packet losses (or reorders), TCP stores incoming packets into an out of order queue, and number of skbs sitting there waiting for the missing packets to be received can be in the 10^5 range. Most packets are appended to the tail of this queue, and when packets can finally be transferred to receive queue, we scan the queue from its head. However, in presence of heavy losses, we might have to find an arbitrary point in this queue, involving a linear scan for every incoming packet, throwing away cpu caches. This patch converts it to a RB tree, to get bounded latencies. Yaogong wrote a preliminary patch about 2 years ago. Eric did the rebase, added ofo_last_skb cache, polishing and tests. Tested with network dropping between 1 and 10 % packets, with good success (about 30 % increase of throughput in stress tests) Next step would be to also use an RB tree for the write queue at sender side ;) Signed-off-by: Yaogong Wang <wygivan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-By: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge branch 'nfp-fixes'David S. Miller
Jakub Kicinski says: ==================== nfp: fixes and trivial cleanup First patch drops unnecessary version.h includes. Second one drops support for pre-release versions of FW ABI. Removing FW ABI 0.0 from supported set is particularly good since 0 could just be uninitialized memory. Last but not least I drop unnecessary padding of frames on RX which makes us count bytes incorrectly for the VF2VF traffic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: don't pad frames on receiveJakub Kicinski
There is no need to pad frames to ETH_ZLEN on RX. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: drop support for old firmware ABIsJakub Kicinski
Be more strict about FW versions. Drop support for old transitional revisions which were never used in production. Dropping support for FW ABI version 0.0.0.0 is particularly useful because 0 could just be uninitialized memory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: remove linux/version.h includesJakub Kicinski
Remove unnecessary version.h includes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: cwnd does not increase in TCP YeAHArtem Germanov
Commit 76174004a0f19785a328f40388e87e982bbf69b9 (tcp: do not slow start when cwnd equals ssthresh ) introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth ~100KB/s. That is caused by stalled cwnd when cwnd equals ssthresh. This patch fixes it by proper increasing cwnd in this case. Signed-off-by: Artem Germanov <agermanov@anchorfree.com> Acked-by: Dmitry Adamushko <d.adamushko@anchorfree.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge branch 'ovs-802.1ad'David S. Miller
Eric Garver says: ==================== openvswitch: add 802.1ad support This series adds 802.1ad support to openvswitch. It is a continuation of the work originally started by Thomas F Herbert - hence the large rev number. The extra VLAN is implemented by using an additional level of the OVS_KEY_ATTR_ENCAP netlink attribute. In OVS flow speak, this looks like eth_type(0x88a8),vlan(vid=100),encap(eth_type(0x8100), vlan(vid=200), encap(eth_type(0x0800), ...)) The userspace counterpart has also seen recent activity on the ovs-dev mailing lists. There are some new 802.1ad OVS tests being added - also on the ovs-dev list. This patch series has been tested using the most recent version of userspace (v3) and tests (v2). v22 changes: - merge patch 4 into patch 3 - fix checkpatch.pl errors - Still some 80 char warnings for long string literals - refresh pointer after pskb_may_pull() - refactor vlan nlattr parsing to remove some double checks - introduce ovs_nla_put_vlan() - move triple VLAN check to after ethertype serialization - WARN_ON_ONCE() on triple VLAN and unexpected encap values v21 changes: - Fix (and simplify) netlink attribute parsing - re-add handling of truncated VLAN tags - fix if/else dangling assignment in {push,pop}_vlan() - simplify parse_vlan() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributesEric Garver
Add support for 802.1ad including the ability to push and pop double tagged vlans. Add support for 802.1ad to netlink parsing and flow conversion. Uses double nested encap attributes to represent double tagged vlan. Inner TPID encoded along with ctci in nested attributes. This is based on Thomas F Herbert's original v20 patch. I made some small clean ups and bug fixes. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08vlan: Check for vlan ethernet types for 8021.q or 802.1adEric Garver
This is to simplify using double tagged vlans. This function allows all valid vlan ethertypes to be checked in a single function call. Also replace some instances that check for both ETH_P_8021Q and ETH_P_8021AD. Patch based on one originally by Thomas F Herbert. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08openvswitch: 802.1ad uapi changes.Thomas F Herbert
openvswitch: Add support for 8021.AD Change the description of the VLAN tpid field. Signed-off-by: Thomas F Herbert <thomasfherbert@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge branch 'mlx5-fixes'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 2016-09-07 The following series contains bug fixes for the mlx5e driver. from Gal, - Static code checker cleanup (casting overflow) - Fix global PFC counter statistics reading - Fix HW LRO when vlan stripping is off From Bodong, - Deprecate old autoneg capability bit and use new one. From Tariq, - Fix xmit more counter race condition ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix parsing of vlan packets when updating lro headerGal Pressman
Currently vlan tagged packets were not parsed correctly and assumed to be regular IPv4/IPv6 packets. We should check for 802.1Q/802.1ad tags and update the lro header accordingly. This fixes the use case where LRO is on and rxvlan is off (vlan stripping is off). Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix global PFC counters replicationGal Pressman
Currently when reading global PFC statistics we left the counter iterator out of the equation and we ended up reading the same counter over and over again. Instead of reading the counter at index 0 on every iteration we now read the counter at index (i). Fixes: e989d5a532ce ('net/mlx5e: Expose flow control counters to ethtool') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Prevent casting overflowGal Pressman
On 64 bits architectures unsigned long is longer than u32, casting to unsigned long will result in overflow. We need to first allocate an unsigned long variable, then assign the wanted value. Fixes: 665bc53969d7 ('net/mlx5e: Use new ethtool get/set link ksettings API') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Move an_disable_cap bit to a new positionBodong Wang
Previous an_disable_cap position bit31 is deprecated to be use in driver with newer firmware. New firmware will advertise the same capability in bit29. Old capability didn't allow setting more than one protocol for a specific speed when autoneg is off, while newer firmware will allow this and it is indicated in the new capability location. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix xmit_more counter race issueTariq Toukan
Update the xmit_more counter before notifying the HW, to prevent a possible use-after-free of the skb. Fixes: c8cf78fe100b ("net/mlx5e: Add ethtool counter for TX xmit_more") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net: inet: diag: expose the socket mark to privileged processes.Lorenzo Colitti
This adds the capability for a process that has CAP_NET_ADMIN on a socket to see the socket mark in socket dumps. Commit a52e95abf772 ("net: diag: allow socket bytecode filters to match socket marks") recently gave privileged processes the ability to filter socket dumps based on mark. This patch is complementary: it ensures that the mark is also passed to userspace in the socket's netlink attributes. It is useful for tools like ss which display information about sockets. Tested: https://android-review.googlesource.com/270210 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: fastopen: avoid negative sk_forward_allocEric Dumazet
When DATA and/or FIN are carried in a SYN/ACK message or SYN message, we append an skb in socket receive queue, but we forget to call sk_forced_mem_schedule(). Effect is that the socket has a negative sk->sk_forward_alloc as long as the message is not read by the application. Josh Hunt fixed a similar issue in commit d22e15371811 ("tcp: fix tcp fin memory accounting") Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Josh Hunt <johunt@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net: ethernet: xilinx: Enable emaclite for MIPSZubair Lutfullah Kakakhel
The MIPS based xilfpga platform uses this driver. Enable it for MIPS Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08cpufreq-stats: Minor documentation fixJean Delvare
The cpufreq-stats code can no longer be built as a module, so it now appears with square brackets in menuconfig. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 1aefc75b2449 (cpufreq: stats: Make the stats code non-modular) Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-08i2c: rk3x: Restore clock settings at resume timeDoug Anderson
Depending on a number of factors including: - Which exact Rockchip SoC we're working with - How deep we suspend - Which i2c port we're on We might lose the state of the i2c registers at suspend time. Specifically we've found that on rk3399 the i2c ports that are not in the PMU power domain lose their state with the current suspend depth configured by ARM Tursted Firmware. Note that there are very few actual i2c registers that aren't configured per transfer anyway so all we actually need to re-configure are the clock config registers. We'll just add a call to rk3x_i2c_adapt_div() at resume time and be done with it. NOTE: On rk3399 on ports whose power was lost, I put printouts in at resume time. I saw things like: before: con=0x00010300, div=0x00060006 after: con=0x00010200, div=0x00180025 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: David Wu <david.wu@rock-chips.com> Tested-by: David Wu <david.wu@rock-chips.com> [wsa: removed duplicate const] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: Spelling s/acknowedge/acknowledge/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: designware: save the preset value of DW_IC_SDA_HOLDZhuo-hao Lee
There are several ways to set the SDA hold time for i2c controller, including: Device Tree, built-in device properties and ACPI. However, if the SDA hold time is not specified by above method, we should read the value, where it is preset by firmware, and save it to sda_hold_time. This is needed because when i2c controller enters runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset default value. And during runtime resume, i2c_dw_init will be called to reconfigure i2c controller. If sda_hold_time is zero, the chipset default hold time will be used, that will be too short for some platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD value should be kept by sda_hold_time. Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2016-09-08 1) Fix a crash when xfrm_dump_sa returns an error. From Vegard Nossum. 2) Remove some incorrect WARN() on normal error handling. From Vegard Nossum. 3) Ignore socket policies when rebuilding hash tables, socket policies are not inserted into the hash tables. From Tobias Brunner. 4) Initialize and check tunnel pointers properly before we use it. From Alexey Kodanev. 5) Fix l3mdev oif setting on xfrm dst lookups. From David Ahern. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next 2016-09-08 1) Constify the xfrm_replay structures. From Julia Lawall 2) Protect xfrm state hash tables with rcu, lookups can be done now without acquiring xfrm_state_lock. From Florian Westphal. 3) Protect xfrm policy hash tables with rcu, lookups can be done now without acquiring xfrm_policy_lock. From Florian Westphal. 4) We don't need to have a garbage collector list per namespace anymore, so use a global one instead. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge tag 'sunxi-clk-fixes-for-4.8' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes Clock Fixes for the Allwinner SoCs, 4.8 Edition The usual bunch of fixes to the our clock drivers, mostly targetted to the brand new sunxi-ng drivers. * tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Fix wrong reset register offsets clk: sunxi-ng: nk: Make ccu_nk_find_best static clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock clk: sunxi: Fix return value check in sun8i_a23_mbus_setup() clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
2016-09-08Merge tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A fix for a 4.7 performance regression, caused by a typo in an if condition" * tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-client: ceph: do not modify fi->frag in need_reset_readdir()
2016-09-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi-id: don't free dev structure after calling device_register
2016-09-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ...
2016-09-08md-cluster: make md-cluster also can work when compiled into kernelGuoqing Jiang
The md-cluster is compiled as module by default, if it is compiled by built-in way, then we can't make md-cluster works. [64782.630008] md/raid1:md127: active with 2 out of 2 mirrors [64782.630528] md-cluster module not found. [64782.630530] md127: Could not setup cluster service (-2) Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions") Cc: stable@vger.kernel.org (v4.1+) Reported-by: Marc Smith <marc.smith@mcc.edu> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-08nvme/quirk: Add a delay before checking device ready for memblaze deviceWenbo Wang
Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-08Documentation: i2c: slave-interface: add note for driver developmentWolfram Sang
Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: mux: demux-pinctrl: run properly with multiple instancesWolfram Sang
We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08x86, clock: Fix kvm guest tsc initializationPrarit Bhargava
When booting a kvm guest on AMD with the latest kernel the following messages are displayed in the boot log: tsc: Unable to calibrate against PIT tsc: HPET/PMTIMER calibration failed aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") introduced a change to account for a difference in cpu and tsc frequencies for Intel SKL processors. Before this change the native tsc set x86_platform.calibrate_tsc to native_calibrate_tsc() which is a hardware calibration of the tsc, and in tsc_init() executed tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; The kvm code changed x86_platform.calibrate_tsc to kvm_get_tsc_khz() and executed the same tsc_init() function. This meant that KVM guests did not execute the native hardware calibration function. After aa297292d708, there are separate native calibrations for cpu_khz and tsc_khz. The code sets x86_platform.calibrate_tsc to native_calibrate_tsc() which is now an Intel specific calibration function, and x86_platform.calibrate_cpu to native_calibrate_cpu() which is the "old" native_calibrate_tsc() function (ie, the native hardware calibration function). tsc_init() now does cpu_khz = x86_platform.calibrate_cpu(); tsc_khz = x86_platform.calibrate_tsc(); if (tsc_khz == 0) tsc_khz = cpu_khz; else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) cpu_khz = tsc_khz; The kvm code should not call the hardware initialization in native_calibrate_cpu(), as it isn't applicable for kvm and it didn't do that prior to aa297292d708. This patch resolves this issue by setting x86_platform.calibrate_cpu to kvm_get_tsc_khz(). v2: I had originally set x86_platform.calibrate_cpu to cpu_khz_from_cpuid(), however, pbonzini pointed out that the CPUID leaf in that function is not available in KVM. I have changed the function pointer to kvm_get_tsc_khz(). Fixes: aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Len Brown <len.brown@intel.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCILee Jones
The STiH4{07,10} platform contains some interconnect clocks which are used by various IPs. If these clocks aren't handled correctly by ST's SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. Cc: stable@vger.kernel.org Tested-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2025-09-14 23:24:11 +0000