summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-26dm verity fec: fix GFP flags used with mempool_alloc()NeilBrown
mempool_alloc() cannot fail for GFP_NOIO allocation, so there is no point testing for failure. One place the code tested for failure was passing "0" as the GFP flags. This is most unusual and is probably meant to be GFP_NOIO, so that is changed. Also, allocation from ->extra_pool and ->prealloc_pool are repeated before releasing the previous allocation. This can deadlock if the code is servicing a write under high memory pressure. To avoid deadlocks, change these to use GFP_NOWAIT and leave the error handling in place. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-26dm zoned: use GFP_NOIO in I/O pathDamien Le Moal
Use GFP_NOIO for memory allocations in the I/O path. Other memory allocations in the initialization path can use GFP_KERNEL. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-26include/linux/vfio.h: Guard powerpc-specific functions with ↵Murilo Opsfelder Araujo
CONFIG_VFIO_SPAPR_EEH When CONFIG_EEH=y and CONFIG_VFIO_SPAPR_EEH=n, build fails with the following: drivers/vfio/pci/vfio_pci.o: In function `.vfio_pci_release': vfio_pci.c:(.text+0xa98): undefined reference to `.vfio_spapr_pci_eeh_release' drivers/vfio/pci/vfio_pci.o: In function `.vfio_pci_open': vfio_pci.c:(.text+0x1420): undefined reference to `.vfio_spapr_pci_eeh_open' In this case, vfio_pci.c should use the empty definitions of vfio_spapr_pci_eeh_open and vfio_spapr_pci_eeh_release functions. This patch fixes it by guarding these function definitions with CONFIG_VFIO_SPAPR_EEH, the symbol that controls whether vfio_spapr_eeh.c is built, which is where the non-empty versions of these functions are. We need to make use of IS_ENABLED() macro because CONFIG_VFIO_SPAPR_EEH is a tristate option. This issue was found during a randconfig build. Logs are here: http://kisskb.ellerman.id.au/kisskb/buildresult/12982362/ Signed-off-by: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-07-26Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes and cleanups from Michael Tsirkin: "Fixes some minor issues all over the codebase" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-net: fix module unloading virtio-balloon: coding format cleanup virtio-balloon: deflate via a page list virtio_blk: Use sysfs_match_string() helper
2017-07-26Merge branch 'kvm-ppc-fixes' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master Two commits which fix host crashes. Signed-off-by: Paolo BOnzini <pbonzini@redhat.com>
2017-07-26KVM: LAPIC: Fix reentrancy issues with preempt notifiersWanpeng Li
Preempt can occur in the preemption timer expiration handler: CPU0 CPU1 preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer hv_timer_is_use == true sched_out sched_in kvm_arch_vcpu_load kvm_lapic_restart_hv_timer restart_apic_timer start_hv_timer already-expired timer or sw timer triggerd in the window start_sw_timer cancel_hv_timer /* back in kvm_lapic_expired_hv_timer */ cancel_hv_timer WARN_ON(!apic->lapic_timer.hv_timer_in_use); ==> Oops This can be reproduced if CONFIG_PREEMPT is enabled. ------------[ cut here ]------------ WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1563 kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm] CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G OE 4.13.0-rc2+ #16 RIP: 0010:kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm] Call Trace: handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xb8/0xd70 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm] ? kvm_arch_vcpu_load+0x47/0x230 [kvm] ? kvm_arch_vcpu_load+0x62/0x230 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 ------------[ cut here ]------------ WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1498 cancel_hv_timer.isra.40+0x4f/0x60 [kvm] CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G W OE 4.13.0-rc2+ #16 RIP: 0010:cancel_hv_timer.isra.40+0x4f/0x60 [kvm] Call Trace: kvm_lapic_expired_hv_timer+0x3e/0xb0 [kvm] handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xb8/0xd70 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm] ? kvm_arch_vcpu_load+0x47/0x230 [kvm] ? kvm_arch_vcpu_load+0x62/0x230 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This patch fixes it by making the caller of cancel_hv_timer, start_hv_timer and start_sw_timer be in preemption-disabled regions, which trivially avoid any reentrancy issue with preempt notifier. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> [Add more WARNs. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26tools/kvm_stat: add '-f help' to get the available event listLin Ma
Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26tools/kvm_stat: use variables instead of hard paths in help outputLin Ma
Using variables instead of hard paths makes the requirements information more accurate. Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26Merge tag 'kvm-s390-master-4.13-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: fixup missing srcu lock We need to hold the srcu lock when accessing memory slots during migration Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: nVMX: Fix loss of L2's NMI blocking stateWanpeng Li
Run kvm-unit-tests/eventinj.flat in L1 w/ ept=0 on both L0 and L1: Before NMI IRET test Sending NMI to self NMI isr running stack 0x461000 Sending nested NMI to self After nested NMI to self Nested NMI isr running rip=40038e After iret After NMI to self FAIL: NMI Commit 4c4a6f790ee862 (KVM: nVMX: track NMI blocking state separately for each VMCS) tracks NMI blocking state separately for vmcs01 and vmcs02. However it is not enough: - The L2 (kvm-unit-tests/eventinj.flat) generates NMI that will fault on IRET, so the L2 can generate #PF which can be intercepted by L0. - L0 walks L1's guest page table and sees the mapping is invalid, it resumes the L1 guest and injects the #PF into L1. At this point the vmcs02 has nmi_known_unmasked=true. - L1 sets set bit 3 (blocking by NMI) in the interruptibility-state field of vmcs12 (and fixes the shadow page table) before resuming L2 guest. - L1 executes VMRESUME to resume L2, causing a vmexit to L0 - during VMRESUME emulation, prepare_vmcs02 sets bit 3 in the interruptibility-state field of vmcs02, but nmi_known_unmasked is still true. - L2 immediately exits to L0 with another page fault, because L0 still has not updated the NGVA->HPA page tables. However, nmi_known_unmasked is true so vmx_recover_nmi_blocking does not do anything. The fix is to update nmi_known_unmasked when preparing vmcs02 from vmcs12. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: nVMX: Fix posted intr delivery when vcpu is in guest modeWincy Van
The PI vector for L0 and L1 must be different. If dest vcpu0 is in guest mode while vcpu1 is delivering a non-nested PI to vcpu0, there wont't be any vmexit so that the non-nested interrupt will be delayed. Signed-off-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26x86: irq: Define a global vector for nested posted interruptsWincy Van
We are using the same vector for nested/non-nested posted interrupts delivery, this may cause interrupts latency in L1 since we can't kick the L2 vcpu out of vmx-nonroot mode. This patch introduces a new vector which is only for nested posted interrupts to solve the problems above. Signed-off-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: x86: do mask out upper bits of PAE CR3Paolo Bonzini
This reverts the change of commit f85c758dbee54cc3612a6e873ef7cecdb66ebee5, as the behavior it modified was intended. The VM is running in 32-bit PAE mode, and Table 4-7 of the Intel manual says: Table 4-7. Use of CR3 with PAE Paging Bit Position(s) Contents 4:0 Ignored 31:5 Physical address of the 32-Byte aligned page-directory-pointer table used for linear-address translation 63:32 Ignored (these bits exist only on processors supporting the Intel-64 architecture) To placate the static checker, write the mask explicitly as an unsigned long constant instead of using a 32-bit unsigned constant. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: f85c758dbee54cc3612a6e873ef7cecdb66ebee5 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26KVM: make pid available for uevents without debugfsClaudio Imbrenda
Simplify and improve the code so that the PID is always available in the uevent even when debugfs is not available. This adds a userspace_pid field to struct kvm, as per Radim's suggestion, so that the PID can be retrieved on destruction too. Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Fixes: 286de8f6ac9202 ("KVM: trigger uevents when creating or destroying a VM") Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26udp: unbreak build lacking CONFIG_XFRMPaolo Abeni
We must use pre-processor conditional block or suitable accessors to manipulate skb->sp elsewhere builds lacking the CONFIG_XFRM will break. Fixes: dce4551cb2ad ("udp: preserve head state for IP_CMSG_PASSSEC") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-26ASoC: codecs: msm8916-analog: fix DIG_CLK_CTL_RXD3_CLK_EN defineDamien Riegel
The wrong bit is assigned to DIG_CLK_CTL_RXD3_CLK_EN, change it for the correct one. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26nvme: validate admin queue before unquiesceScott Bauer
With a misbehaving controller it's possible we'll never enter the live state and create an admin queue. When we fail out of reset work it's possible we failed out early enough without setting up the admin queue. We tear down queues after a failed reset, but needed to do some more sanitization. Fixes 443bd90f2cca: "nvme: host: unquiesce queue in nvme_kill_queues()" [ 189.650995] nvme nvme1: pci function 0000:0b:00.0 [ 317.680055] nvme nvme0: Device not ready; aborting reset [ 317.680183] nvme nvme0: Removing after probe failure status: -19 [ 317.681258] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 317.681397] general protection fault: 0000 [#1] SMP KASAN [ 317.682984] CPU: 3 PID: 477 Comm: kworker/3:2 Not tainted 4.13.0-rc1+ #5 [ 317.683112] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016 [ 317.683284] Workqueue: events nvme_remove_dead_ctrl_work [nvme] [ 317.683398] task: ffff8803b0990000 task.stack: ffff8803c2ef0000 [ 317.683516] RIP: 0010:blk_mq_unquiesce_queue+0x2b/0xa0 [ 317.683614] RSP: 0018:ffff8803c2ef7d40 EFLAGS: 00010282 [ 317.683716] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1006fbdcde3 [ 317.683847] RDX: 0000000000000038 RSI: 1ffff1006f5a9245 RDI: 0000000000000000 [ 317.683978] RBP: ffff8803c2ef7d58 R08: 1ffff1007bcdc974 R09: 0000000000000000 [ 317.684108] R10: 1ffff1007bcdc975 R11: 0000000000000000 R12: 00000000000001c0 [ 317.684239] R13: ffff88037ad49228 R14: ffff88037ad492d0 R15: ffff88037ad492e0 [ 317.684371] FS: 0000000000000000(0000) GS:ffff8803de6c0000(0000) knlGS:0000000000000000 [ 317.684519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 317.684627] CR2: 0000002d1860c000 CR3: 000000045b40d000 CR4: 00000000003406e0 [ 317.684758] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 317.684888] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 317.685018] Call Trace: [ 317.685084] nvme_kill_queues+0x4d/0x170 [nvme_core] [ 317.685185] nvme_remove_dead_ctrl_work+0x3a/0x90 [nvme] [ 317.685289] process_one_work+0x771/0x1170 [ 317.685372] worker_thread+0xde/0x11e0 [ 317.685452] ? pci_mmcfg_check_reserved+0x110/0x110 [ 317.685550] kthread+0x2d3/0x3d0 [ 317.685617] ? process_one_work+0x1170/0x1170 [ 317.685704] ? kthread_create_on_node+0xc0/0xc0 [ 317.685785] ret_from_fork+0x25/0x30 [ 317.685798] Code: 0f 1f 44 00 00 55 48 b8 00 00 00 00 00 fc ff df 48 89 e5 41 54 4c 8d a7 c0 01 00 00 53 48 89 fb 4c 89 e2 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 75 50 48 8b bb c0 01 00 00 e8 33 8a f9 00 0f ba b3 [ 317.685872] RIP: blk_mq_unquiesce_queue+0x2b/0xa0 RSP: ffff8803c2ef7d40 [ 317.685908] ---[ end trace a3f8704150b1e8b4 ]--- Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-26xfs: fix multi-AG deadlock in xfs_bunmapiChristoph Hellwig
Just like in the allocator we must avoid touching multiple AGs out of order when freeing blocks, as freeing still locks the AGF and can cause the same AB-BA deadlocks as in the allocation path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-07-26iommu/amd: Fix schedule-while-atomic BUG in initialization codeJoerg Roedel
The register_syscore_ops() function takes a mutex and might sleep. In the IOMMU initialization code it is invoked during irq-remapping setup already, where irqs are disabled. This causes a schedule-while-atomic bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: swapper/0 no locks held by swapper/0/1. irq event stamp: 304 hardirqs last enabled at (303): [<ffffffff818a87b6>] _raw_spin_unlock_irqrestore+0x36/0x60 hardirqs last disabled at (304): [<ffffffff8235d440>] enable_IR_x2apic+0x79/0x196 softirqs last enabled at (36): [<ffffffff818ae75f>] __do_softirq+0x35f/0x4ec softirqs last disabled at (31): [<ffffffff810c1955>] irq_exit+0x105/0x120 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2.1.el7a.test.x86_64.debug #1 Hardware name: PowerEdge C6145 /040N24, BIOS 3.5.0 10/28/2014 Call Trace: dump_stack+0x85/0xca ___might_sleep+0x22a/0x260 __might_sleep+0x4a/0x80 __mutex_lock+0x58/0x960 ? iommu_completion_wait.part.17+0xb5/0x160 ? register_syscore_ops+0x1d/0x70 ? iommu_flush_all_caches+0x120/0x150 mutex_lock_nested+0x1b/0x20 register_syscore_ops+0x1d/0x70 state_next+0x119/0x910 iommu_go_to_state+0x29/0x30 amd_iommu_enable+0x13/0x23 Fix it by moving the register_syscore_ops() call to the next initialization step, which runs with irqs enabled. Reported-by: Artem Savkov <asavkov@redhat.com> Tested-by: Artem Savkov <asavkov@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Fixes: 2c0ae1720c09 ('iommu/amd: Convert iommu initialization to state machine') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-26media: atomisp2: array underflow in imx_enum_frame_size()Dan Carpenter
The code looks in imx_enum_frame_size() looks like this: 2066 int index = fse->index; 2067 struct imx_device *dev = to_imx_sensor(sd); 2068 2069 mutex_lock(&dev->input_lock); 2070 if (index >= dev->entries_curr_table) { 2071 mutex_unlock(&dev->input_lock); 2072 return -EINVAL; 2073 } 2074 2075 fse->min_width = dev->curr_res_table[index].width; "fse->index" is a u32 that comes from the user. We want negative values of "index" to be -EINVAL so we don't read before the start of the dev->curr_res_table[] array. I've made "entries_curr_table" unsigned long to fix this. I thought about making it unsigned int, but because of struct alignment, it doesn't use more memory either way. Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: atomisp2: array underflow in ap1302_enum_frame_size()Dan Carpenter
The problem is this code from ap1302_enum_frame_size(): 738 int index = fse->index; 739 740 mutex_lock(&dev->input_lock); 741 context = ap1302_get_context(sd); 742 if (index >= dev->cntx_res[context].res_num) { 743 mutex_unlock(&dev->input_lock); 744 return -EINVAL; 745 } 746 747 res_table = dev->cntx_res[context].res_table; 748 fse->min_width = res_table[index].width; "fse->index" is a u32 that come from the user. We want negative values of "index" to be treated as -EINVAL but they're not so we can read from before the start of the res_table[] array. I've fixed this by making "res_num" a u32. I made "cur_res" a u32 as well, just for consistency. Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: atomisp2: Array underflow in atomisp_enum_input()Dan Carpenter
The problem here is this code from atomisp_enum_input(): 581 int index = input->index; 582 583 if (index >= isp->input_cnt) 584 return -EINVAL; 585 586 if (!isp->inputs[index].camera) 587 return -EINVAL; "input->index" is a u32 which comes from the ioctl. We want negative values of "index" to be counted as -EINVAL but they aren't. I've fixed this by changing the type of "isp->input_cnt" to unsigned int. Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26ASoC: Intel: Skylake: Fix missing sentinels in sst_acpi_machVinod Koul
Couple of instances of sst_acpi_mach were having missing sentinels so add them up Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-26media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMSPrabhakar Lad
drop VPFE_CMD_S_CCDC_RAW_PARAMS ioctl from dm355/dm644x following reasons: - This ioctl was never in public api and was only defined in kernel header. - The function set_params constantly mixes up pointers and phys_addr_t numbers. - This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is described as an 'experimental ioctl that will change in future kernels'. - The code to allocate the table never gets called after we copy_from_user the user input over the kernel settings, and then compare them for inequality. - We then go on to use an address provided by user space as both the __user pointer for input and pass it through phys_to_virt to come up with a kernel pointer to copy the data to. This looks like a trivially exploitable root hole. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctlPrabhakar Lad
this patch makes sure VPFE_CMD_S_CCDC_RAW_PARAMS ioctl no longer works for vpfe_capture driver with a minimal patch suitable for backporting. - This ioctl was never in public api and was only defined in kernel header. - The function set_params constantly mixes up pointers and phys_addr_t numbers. - This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is described as an 'experimental ioctl that will change in future kernels'. - The code to allocate the table never gets called after we copy_from_user the user input over the kernel settings, and then compare them for inequality. - We then go on to use an address provided by user space as both the __user pointer for input and pass it through phys_to_virt to come up with a kernel pointer to copy the data to. This looks like a trivially exploitable root hole. Due to these reasons we make sure this ioctl now returns -EINVAL and backport this patch as far as possible. Fixes: 5f15fbb68fd7 ("V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver") Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: <stable@vger.kernel.org> # for v3.7 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: venus: don't abuse dma_alloc for non-DMA allocationsStanimir Varbanov
In venus_boot(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: platform/qcom/venus/firmware.c: In function 'venus_boot': platform/qcom/venus/firmware.c:63:49: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] To avoid the error refactor venus_boot function by discard dma_alloc_coherent invocation because we don't want to map the memory for the device. Something more, the usage of DMA mapping API is actually wrong and the current implementation relies on several bugs in DMA mapping code. When these bugs are fixed that will break firmware loading, so fix this now to avoid future troubles. The meaning of venus_boot is to copy the content of the firmware buffer into reserved (and memblock removed) block of memory and pass that physical address to the trusted zone for authentication and mapping through iommu form the secure world. After iommu mapping is done the iova is passed as ane entry point to the remote processor. After this change memory-region property is parsed manually and the physical address is memremap to CPU, call mdt_load to load firmware segments into proper places and unmap reserved memory. Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: venus: hfi: fix error handling in hfi_sys_init_done()Rob Clark
Not entirely sure what triggers it, but with venus build as kernel module and in initrd, we hit this crash: Unable to handle kernel paging request at virtual address ffff80003c039000 pgd = ffff00000a14f000 [ffff80003c039000] *pgd=00000000bd9f7003, *pud=00000000bd9f6003, *pmd=00000000bd9f0003, *pte=0000000000000000 Internal error: Oops: 96000007 [#1] SMP Modules linked in: qcom_wcnss_pil(E+) crc32_ce(E) qcom_common(E) venus_core(E+) remoteproc(E) snd_soc_msm8916_digital(E) virtio_ring(E) cdc_ether(E) snd_soc_lpass_apq8016(E) snd_soc_lpass_cpu(E) snd_soc_apq8016_sbc(E) snd_soc_lpass_platform(E) v4l2_mem2mem(E) virtio(E) snd_soc_core(E) ac97_bus(E) snd_pcm_dmaengine(E) snd_seq(E) leds_gpio(E) videobuf2_v4l2(E) videobuf2_core(E) snd_seq_device(E) snd_pcm(E) videodev(E) media(E) nvmem_qfprom(E) msm(E) snd_timer(E) snd(E) soundcore(E) spi_qup(E) mdt_loader(E) qcom_tsens(E) qcom_spmi_temp_alarm(E) nvmem_core(E) msm_rng(E) uas(E) usb_storage(E) dm9601(E) usbnet(E) mii(E) mmc_block(E) adv7511(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) qcom_spmi_vadc(E) qcom_vadc_common(PE) industrialio(E) pinctrl_spmi_mpp(E) pinctrl_spmi_gpio(E) rtc_pm8xxx(E) clk_smd_rpm(E) sdhci_msm(E) sdhci_pltfm(E) qcom_smd_regulator(E) drm(E) smd_rpm(E) qcom_spmi_pmic(E) regmap_spmi(E) ci_hdrc_msm(E) ci_hdrc(E) usb3503(E) extcon_usb_gpio(E) phy_msm_usb(E) udc_core(E) qcom_hwspinlock(E) extcon_core(E) ehci_msm(E) i2c_qup(E) sdhci(E) mmc_core(E) spmi_pmic_arb(E) spmi(E) qcom_smd(E) smsm(E) rpmsg_core(E) smp2p(E) smem(E) hwspinlock_core(E) gpio_keys(E) CPU: 2 PID: 551 Comm: irq/150-venus Tainted: P E 4.12.0+ #1625 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc2-00144-ga97bdbdf72-dirty 07/08/2017 task: ffff800037338000 task.stack: ffff800038e00000 PC is at hfi_sys_init_done+0x64/0x140 [venus_core] LR is at hfi_process_msg_packet+0xcc/0x1e8 [venus_core] pc : [<ffff00000118b384>] lr : [<ffff00000118c11c>] pstate: 20400145 sp : ffff800038e03c60 x29: ffff800038e03c60 x28: 0000000000000000 x27: 00000000000df018 x26: ffff00000118f4d0 x25: 0000000000020003 x24: ffff80003a8d3010 x23: ffff00000118f760 x22: ffff800037b40028 x21: ffff8000382981f0 x20: ffff800037b40028 x19: ffff80003c039000 x18: 0000000000000020 x17: 0000000000000000 x16: ffff800037338000 x15: ffffffffffffffff x14: 0000001000000014 x13: 0000000100001007 x12: 0000000100000020 x11: 0000100e00000000 x10: 0000000000000001 x9 : 0000000200000000 x8 : 0000001400000001 x7 : 0000000000001010 x6 : 0000000000000148 x5 : 0000000000001009 x4 : ffff80003c039000 x3 : 00000000cd770abb x2 : 0000000000000042 x1 : 0000000000000788 x0 : 0000000000000002 Process irq/150-venus (pid: 551, stack limit = 0xffff800038e00000) Call trace: [<ffff00000118b384>] hfi_sys_init_done+0x64/0x140 [venus_core] [<ffff00000118c11c>] hfi_process_msg_packet+0xcc/0x1e8 [venus_core] [<ffff00000118a2b4>] venus_isr_thread+0x1b4/0x208 [venus_core] [<ffff00000118e750>] hfi_isr_thread+0x28/0x38 [venus_core] [<ffff000008161550>] irq_thread_fn+0x30/0x70 [<ffff0000081617fc>] irq_thread+0x14c/0x1c8 [<ffff000008105e68>] kthread+0x138/0x140 [<ffff000008083590>] ret_from_fork+0x10/0x40 Code: 52820125 52820207 7a431820 54000249 (b9400263) ---[ end trace c963460f20a984b6 ]--- The problem is that in the error case, we've incremented the data ptr but not decremented rem_bytes, and keep reading (presumably garbage) until eventually we go beyond the end of the buffer. Instead, on first error, we should probably just bail out. Other option is to increment read_bytes by sizeof(u32) before the switch, rather than only accounting for the ptype header in the non-error case. Note that in this case it is HFI_ERR_SYS_INVALID_PARAMETER, ie. an unrecognized/unsupported parameter, so interpreting the next word as a property type would be bogus. The other error cases are due to truncated buffer, so there isn't likely to be anything valid to interpret in the remainder of the buffer. So just bailing seems like a reasonable solution. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: venus: fix compile-test build on non-qcom ARM platformArnd Bergmann
If QCOM_MDT_LOADER is enabled, but ARCH_QCOM is not, we run into a build error: ERROR: "qcom_mdt_load" [drivers/media/platform/qcom/venus/venus-core.ko] undefined! ERROR: "qcom_mdt_get_size" [drivers/media/platform/qcom/venus/venus-core.ko] undefined! This changes the 'select' statement again, so we only try to enable those symbols when the drivers will actually get built, and explicitly test for QCOM_MDT_LOADER to be enabled before calling into it. Fixes: 76724b30f222 ("[media] media: venus: enable building with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: venus: mark PM functions as __maybe_unusedArnd Bergmann
Without PM support, gcc warns about two unused functions: platform/qcom/venus/core.c:146:13: error: 'venus_clks_disable' defined but not used [-Werror=unused-function] platform/qcom/venus/core.c:126:12: error: 'venus_clks_enable' defined but not used [-Werror=unused-function] The problem as usual are incorrect #ifdefs, so the easiest fix is to do away with the #ifdef completely and mark the suspend/resume handlers as __maybe_unused, which they are. Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: cec-notifier: small improvementsHans Verkuil
Allow calling cec_notifier_set_phys_addr and cec_notifier_set_phys_addr_from_edid with a NULL notifier, in which case these functions do nothing. Add a cec_notifier_phys_addr_invalidate helper function (the notifier equivalent of cec_phys_addr_invalidate). These changes simplify drm CEC driver support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: pulse8-cec: persistent_config should be off by defaultHans Verkuil
The persistent_config option is used to make the CEC settings persistent by using the eeprom inside the device to store this information. This was on by default, which caused confusion since this device now behaves differently from other CEC devices which all come up unconfigured. Another reason for doing this now is that I hope a more standard way of selecting persistent configuration will be created in the future. And for that to work all CEC drivers should behave the same and come up unconfigured by default. None of the open source CEC applications are using this CEC framework at the moment so change this behavior before it is too late. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIESHans Verkuil
The switch in cec_transmit_attempt_done() should ignore the CEC_TX_STATUS_MAX_RETRIES status bit. Calling this function with e.g. CEC_TX_STATUS_NACK | CEC_TX_STATUS_MAX_RETRIES is perfectly legal and should not trigger the WARN(1). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: staging: atomisp: array underflow in ioctlDan Carpenter
I noticed an array underflow in ov5693_enum_frame_size(). The code looks like this: int index = fse->index; if (index >= N_RES) retur -EINVAL; fse->index is a u32 that comes from the user. We want negative values to be counted as -EINVAL but they aren't. There are several ways to fix this but I feel like the best fix for future proofing is to change the type of N_RES from int to unsigned long to make it the same as if we were comparing against ARRAY_SIZE(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: lirc: LIRC_GET_REC_RESOLUTION should return microsecondsSean Young
Since commit e8f4818895b3 ("[media] lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve") lircd uses the ioctl LIRC_GET_REC_RESOLUTION to determine the shortest pulse or space that the hardware can detect. This breaks decoding in lirc because lircd expects the answer in microseconds, but nanoseconds is returned. Cc: <stable@vger.kernel.org> # v2.6.36+ Reported-by: Derek <user.vdr@gmail.com> Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: svg: avoid too long linesMauro Carvalho Chehab
Sending patches with SVG files via e-mail has a drawback: line size could be bigger than 998, with is the limit given by RFC 5322[1]. So, we need to enforce a lower limit, in order to allow those patches to be properly reviewed. [1] https://tools.ietf.org/html/rfc5322#section-2.1.1 So, use this small Perl script to limit columns size to ~900. use Text::Wrap; $Text::Wrap::columns = 900; $t.=$_ while (<>); print wrap("","",$t); Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: svg files: simplify filesMauro Carvalho Chehab
Debian's ImageMagick is currently unable to decode those images. Use scour to simplify the SVG, and provide only one font type, in order to make it more palatable. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: selection.svg: simplify the SVG fileMauro Carvalho Chehab
This file is too big, with cause it to require a lot of memory when parsed by texlive. Optimize it, in order to avoid the need of touching at main_memory at texmf.cnf. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26media: vimc: set id_table for platform driversJavier Martinez Canillas
The vimc platform drivers define a platform device ID table but these are not set to the .id_table field in the platform driver structure. So the platform device ID table is only used to fill the aliases in the module but are not used for matching (works because the platform subsystem fallbacks to the driver's name if no .id_table is set). But this also means that the platform device ID table isn't used if the driver is built-in, which leads to the following build warning: This causes the following build warnings when the driver is built-in: drivers/media/platform/vimc//vimc-capture.c:528:40: warning: ‘vimc_cap_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_cap_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-debayer.c:588:40: warning: ‘vimc_deb_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_deb_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-scaler.c:442:40: warning: ‘vimc_sca_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_sca_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ drivers/media/platform/vimc//vimc-sensor.c:376:40: warning: ‘vimc_sen_driver_ids’ defined but not used [-Wunused-const-variable=] static const struct platform_device_id vimc_sen_driver_ids[] = { ^~~~~~~~~~~~~~~~~~~ Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26arm64: sysreg: Fix unprotected macro argmuent in write_sysregDave Martin
write_sysreg() may misparse the value argument because it is used without parentheses to protect it. This patch adds the ( ) in order to avoid any surprises. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> [will: same change to write_sysreg_s] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-26perf: qcom_l2: fix column exclusion checkNeil Leeder
The check for column exclusion did not verify that the event being checked was an L2 event, and not a software event. Software events should not be checked for column exclusion. This resulted in a group with both software and L2 events sometimes incorrectly rejecting the L2 event for column exclusion and not counting it. Add a check for PMU type before applying column exclusion logic. Fixes: 21bdbb7102edeaeb ("perf: add qcom l2 cache perf events driver") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-26powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchainMichael Ellerman
In commit efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions for modules"), we added an ld version check early in the powerpc top-level Makefile. Because the Makefile runs before the kernel config is setup, the checks for CONFIG_CPU_LITTLE_ENDIAN etc. all take the default case. So we end up configuring ld for 32-bit big endian. That would be OK, except that for historical (or perhaps no) reason, we use 'override LD' to add the endian flags to the LD variable itself, rather than the normal approach of adding them to LDFLAGS. The end result is that when we check the ld version we run it as: $(CROSS_COMPILE)ld -EB -m elf32ppc --version This often works, unless you are using a 64-bit only and/or little endian only, toolchain. In which case you see something like: $ make defconfig powerpc64le-linux-ld: unrecognised emulation mode: elf32ppc Supported emulations: elf64lppc elf32lppc elf32lppclinux elf32lppcsim /bin/sh: 1: [: -ge: unexpected operator The proper fix is to stop using 'override LD', but that will require a fair bit of testing. Instead we can fix it for now just by reordering the Makefile to do the version check earlier. Fixes: efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions for modules") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-26powerpc/pseries: Fix of_node_put() underflow during reconfig removeLaurent Vivier
As for commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-26powerpc/mm/radix: Workaround prefetch issue with KVMBenjamin Herrenschmidt
There's a somewhat architectural issue with Radix MMU and KVM. When coming out of a guest with AIL (Alternate Interrupt Location, ie, MMU enabled), we start executing hypervisor code with the PID register still containing whatever the guest has been using. The problem is that the CPU can (and will) then start prefetching or speculatively load from whatever host context has that same PID (if any), thus bringing translations for that context into the TLB, which Linux doesn't know about. This can cause stale translations and subsequent crashes. Fixing this in a way that is neither racy nor a huge performance impact is difficult. We could just make the host invalidations always use broadcast forms but that would hurt single threaded programs for example. We chose to fix it instead by partitioning the PID space between guest and host. This is possible because today Linux only use 19 out of the 20 bits of PID space, so existing guests will work if we make the host use the top half of the 20 bits space. We additionally add support for a property to indicate to Linux the size of the PID register which will be useful if we eventually have processors with a larger PID space available. There is still an issue with malicious guests purposefully setting the PID register to a value in the hosts PID range. Hopefully future HW can prevent that, but in the meantime, we handle it with a pair of kludges: - On the way out of a guest, before we clear the current VCPU in the PACA, we check the PID and if it's outside of the permitted range we flush the TLB for that PID. - When context switching, if the mm is "new" on that CPU (the corresponding bit was set for the first time in the mm cpumask), we check if any sibling thread is in KVM (has a non-NULL VCPU pointer in the PACA). If that is the case, we also flush the PID for that CPU (core). This second part is needed to handle the case where a process is migrated (or starts a new pthread) on a sibling thread of the CPU coming out of KVM, as there's a window where stale translations can exist before we detect it and flush them out. A future optimization could be added by keeping track of whether the PID has ever been used and avoid doing that for completely fresh PIDs. We could similarily mark PIDs that have been the subject of a global invalidation as "fresh". But for now this will do. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop unneeded include of kvm_book3s_asm.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-25net: ethernet: nb8800: Handle all 4 RGMII modes identicallyMarc Gonzalez
Before commit bf8f6952a233 ("Add blurb about RGMII") it was unclear whose responsibility it was to insert the required clock skew, and in hindsight, some PHY drivers got it wrong. The solution forward is to introduce a new property, explicitly requiring skew from the node to which it is attached. In the interim, this driver will handle all 4 RGMII modes identically (no skew). Fixes: 52dfc8301248 ("net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller") Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25Revert "netvsc: optimize calculation of number of slots"stephen hemminger
The logic for computing page buffer scatter does not take into account the impact of compound pages. Therefore the optimization to compute number of slots was incorrect and could cause stack corruption a skb was sent with lots of fragments from huge pages. This reverts commit 60b86665af0dfbeebda8aae43f0ba451cd2dcfe5. Fixes: 60b86665af0d ("netvsc: optimize calculation of number of slots") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25ftgmac100: return error in ftgmac100_alloc_rx_bufJoel Stanley
The error paths set err, but it's not returned. I wondered if we should fix all of the callers to check the returned value, but Ben explains why the code is this way: > Most call sites ignore it on purpose. There's nothing we can do if > we fail to get a buffer at interrupt time, so we point the buffer to > the scratch page so the HW doesn't DMA into lalaland and lose the > packet. > > The one call site that tests and can fail is the one used when brining > the interface up. If we fail to allocate at that point, we fail the > ifup. But as you noticed, I do have a bug not returning the error. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25ipv6: Don't increase IPSTATS_MIB_FRAGFAILS twice in ip6_fragment()Stefano Brivio
RFC 2465 defines ipv6IfStatsOutFragFails as: "The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this output interface but could not be." The existing implementation, instead, would increase the counter twice in case we fail to allocate room for single fragments: once for the fragment, once for the datagram. This didn't look intentional though. In one of the two affected affected failure paths, the double increase was simply a result of a new 'goto fail' statement, introduced to avoid a skb leak. The other path appears to be affected since at least 2.6.12-rc2. Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Fixes: 1d325d217c7f ("ipv6: ip6_fragment: fix headroom tests and skb leak") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
2017-07-25Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuidLinus Torvalds
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
2017-07-25Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
generated by cgit (git 2.34.1) at 2025-09-11 18:32:27 +0000