summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-15drm/amdgpu: move pci_save_state into suspend pathAlex Deucher
for amdgpu_device_suspend. This follows the logic in the resume path. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15Revert "drm/radeon: Fix EEH during kexec"Alex Deucher
This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6. This breaks some boards. Maybe just enable this on PPC for now? Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: fix build error casused by CONFIG_DRM_AMD_DC_DCN2_1Hersen Wu
when CONFIG_DRM_AMD_DC_DCN2_1 is not enable in .config, there is build error. struct dpm_clocks shoud not be guarded. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: hook renoir dc to pplib funcsHersen Wu
enable dc get dmp clock table and set dcn watermarks via pplib. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15dmr/amdgpu: Fix crash on SRIOV for ERREVENT_ATHUB_INTERRUPT interrupt.Andrey Grodzovsky
Ignre the ERREVENT_ATHUB_INTERRUPT for systems without RAS. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-and-tested-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: user pages array memory leak fixPhilip Yang
user_pages array should always be freed after validation regardless if user pages are changed after bo is created because with HMM change parse bo always allocate user pages array to get user pages for userptr bo. v2: remove unused local variable and amend commit v3: add back get user pages in gem_userptr_ioctl, to detect application bug where an userptr VMA is not ananymous memory and reject it. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1844962 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Joe Barnett <thejoe@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/powerplay: add renoir funcs to support dcHersen Wu
there are two paths for renoir dc access smu. one dc access smu directly using bios smc interface: set disply, dprefclk, etc. another goes through pplib for get dpm clock table and set watermmark. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: enable Arcturus runtime VCN dpm on/offEvan Quan
Enable runtime VCN DPM on/off on Arcturus. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: bug fix for pcie parameters overrideKenneth Feng
Bug fix for pcie paramerers override on swsmu. Below is a scenario to have this problem. pptable definition on pcie dpm: 0 -> pcie gen speed:1, pcie lanes: *16 1 -> pcie gen speed:4, pcie lanes: *16 Then if we have a system only have the capbility: pcie gen speed: 3, pcie lanes: *8, we will override dpm 1 to pcie gen speed 3, pcie lanes *8. But the code skips the dpm 0 configuration. So the real pcie dpm parameters are: 0 -> pcie gen speed:1, pcie lanes: *16 1 -> pcie gen speed:3, pcie lanes: *8 Then the wrong pcie lanes will be toggled. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: Fix tdr3 could hang with slow compute issueEmily Deng
When index is 1, need to set compute ring timeout for sriov and passthrough. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: fix potential VM faultsChristian König
When we allocate new page tables under memory pressure we should not evict old ones. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: fix error handling in amdgpu_bo_list_createChristian König
We need to drop normal and userptr BOs separately. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: add RAS support for VML2 and ATCL2Dennis Li
v1: Add codes to query the EDC count of VML2 & ATCL2 v2: Rename VML2/ATCL2 registers and drop their mask define v3: Add back the ECC mask for VML2 registers Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/include: add register define for VML2 and ATCL2Dennis Li
Add VML2 and ATCL2 ECC registers to support VEGA20 RAS Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: change to query the actual EDC counterDennis Li
For the potential request in the future, change to query the actual EDC counter. Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: add BACO platformCaps for VEGA20Le Ma
BACO reset is needed for RAS recovery. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: send EnterBaco msg with argument as RAS recovery flagLe Ma
1 indicates RAS recovery flag in SMU FW. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: avoid disabling ECC if RAS is enabled for VEGA20Le Ma
Program THM_BACO_CNTL.SOC_DOMAIN_IDLE=1 will tell VBIOS to disable ECC when BACO exit. This can save BACO exit time by PSP on none-ECC SKU. Drop the setting for ECC supported SKU. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/soc15: disable doorbell interrupt as part of BACO entry sequenceLe Ma
Workaround to make RAS recovery work in BACO reset. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1Hans de Goede
Bail from the pci_driver probe function instead of from the drm_driver load function. This avoid /dev/dri/card0 temporarily getting registered and then unregistered again, sending unwanted add / remove udev events to userspace. Specifically this avoids triggering the (userspace) bug fixed by this plymouth merge-request: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59 Note that despite that being a userspace bug, not sending unnecessary udev events is a good idea in general. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: clean up dcn2*_pp_smu functionsAlex Deucher
Use the dcn21 functions in dcn21_resource.c and make the dcn20 functions static since they are only used in dcn20_resource now. Cc: bhawanpreet.lakha@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: re-enable FW_DSTATE feature bitXiaojie Yuan
SMU firmware has fix the bug, so remove this workaround. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/discovery: reserve discovery data at the top of VRAMXiaojie Yuan
IP Discovery data is TMR fenced by the latest PSP BL, so we need to reserve this region. Tested on navi10/12/14 with VBIOS integrated with latest PSP BL. v2: use DISCOVERY_TMR_SIZE macro as bo size use amdgpu_bo_create_kernel_at() to allocate bo Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/swSMU: custom UMD pstate peak clock for navi14Kevin Wang
add navi14 umd pstate peak clock support. NAVI14_UMD_PSTATE_PEAK_XT_GFXCLK 1670 MHz NAVI14_UMD_PSTATE_PEAK_XTM_GFXCLK 1448 MHz NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK 1181 MHz NAVI14_UMD_PSTATE_PEAK_XTX_GFXCLK 1717 MHz NAVI14_UMD_PSTATE_PEAK_XL_GFXCLK 1448 MHz Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: enable df cstate control on swSMU routineEvan Quan
Currently this is only supported on Vega20 with 40.50 and later SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: enable df cstate control on powerplay routineEvan Quan
Currently this is only supported on Vega20 with 40.50 and later SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS (qla2xxx) and two in the core. The last two are mostly about removing incorrect messages from the kernel log: the resid message is definitely wrong and the sync cache on protected drive problem is arguably wrong" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Update qla2xxx driver scsi: zfcp: fix reaction on bit error threshold notification scsi: core: save/restore command resid for error handling scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry() scsi: sd: Ignore a failure to sync cache due to lack of authorization
2019-10-15drm: Add LT-tunable PHY repeater mode operationsRodrigo Siqueira
LT-tunable PHY Repeaters can operate in two different modes: transparent (default) and non-transparent. The value 0x55 specifies the transparent mode, and 0xaa represents the non-transparent; this commit adds these two values as definitions. Cc: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015134010.26zwopwnrbsmz5az@outlook.office365.com
2019-10-15net: ethernet: broadcom: have drivers select DIMLIB as neededRandy Dunlap
NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET). Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/ Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: Update address for vrf and l3mdev in MAINTAINERSDavid Ahern
Use my kernel.org address for all entries in MAINTAINERS. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: bcmgenet: Set phydev->dev_flags only for internal PHYsFlorian Fainelli
phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15blackhole_netdev: fix syzkaller reported issueMahesh Bandewar
While invalidating the dst, we assign backhole_netdev instead of loopback device. However, this device does not have idev pointer and hence no ip6_ptr even if IPv6 is enabled. Possibly this has triggered the syzbot reported crash. The syzbot report does not have reproducer, however, this is the only device that doesn't have matching idev created. Crash instruction is : static inline bool ip6_ignore_linkdown(const struct net_device *dev) { const struct inet6_dev *idev = __in6_dev_get(dev); return !!idev->cnf.ignore_routes_with_linkdown; <= crash } Also ipv6 always assumes presence of idev and never checks for it being NULL (as does the above referenced code). So adding a idev for the blackhole_netdev to avoid this class of crashes in the future. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15drm/i915/tgl: Wa_1607138340Mika Kuoppala
Avoid possible cs hang with semaphores by disabling lite restore. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-11-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1607030317, Wa_1607186500, Wa_1607297627Mika Kuoppala
Disable semaphore idle messages and wait for event power downs. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-10-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1607138336Mika Kuoppala
Avoid possible deadlock on context switch. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-9-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409600907Mika Kuoppala
To avoid possible hang, we need to add depth stall if we flush the depth cache. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-8-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409170338Mika Kuoppala
Avoid possible hang in tsg,vfe units by keeping l3 clocks runnings. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-7-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409420604Mika Kuoppala
Avoid possible hang in CPSS unit. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-6-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Keep FF dop clock enabled for A0Mika Kuoppala
To ensure correct state data for compute workloads, we need to keep the ff dop clock enabled. References: HSDES#1606700617 Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-5-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add extra hdc flush workaroundMika Kuoppala
In order to ensure constant caches are invalidated properly with a0, we need extra hdc flush after invalidation. v2: use IS_TGL_REVID (Chris) References: HSDES#1604544889 Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-4-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add HDC Pipeline FlushMika Kuoppala
Add hdc pipeline flush to ensure memory state is coherent in L3 when we are done. v2: Flush also in breadcrumbs (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-3-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Include ro parts of l3 to invalidateMika Kuoppala
Aim for completeness and invalidate also the ro parts in l3 cache. This might allow to get rid of the preparser disable/enable workaround on invalidation path. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-2-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add IS_TGL_REVIDMika Kuoppala
We are going to need this macro on limiting the workaround scope. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-1-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/icl: Wa_1607087056Mika Kuoppala
Avoid possible hang in tsg,vfe units by keeping l3 clocks runnings. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154411.9984-1-mika.kuoppala@linux.intel.com
2019-10-15sparc64: disable fast-GUP due to unexplained oopsesLinus Torvalds
HAVE_FAST_GUP enables the lockless quick page table walker for simple cases, and is a nice optimization for some random loads that can then use get_user_pages_fast() rather than the more careful page walker. However, for some unexplained reason, it seems to be subtly broken on sparc64. The breakage is only with some compiler versions and some hardware, and nobody seems to have figured out what triggers it, although there's a simple reprodicer for the problem when it does trigger. The problem was introduced with the conversion to the generic GUP code in commit 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code"), but nothing looks obviously wrong in that conversion. It may be a compiler bug that just hits us with the code reorganization. Or it may be something very specific to sparc64. This disables HAVE_FAST_GUP entirely. That makes things like futexes a bit slower, but at least they work. If we can figure out the trigger, that would be lovely, but it's been three months already.. Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/ Fixes: 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code") Reported-by: Dmitry V Levin <ldv@altlinux.org> Reported-by: Anatoly Pugachev <matorola@gmail.com> Requested-by: Meelis Roos <mroos@linux.ee> Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-15Merge tag 'wireless-drivers-for-davem-2019-10-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND bug are the ones getting most reports at the moment. ath10k * fix throughput regression on QCA98XX iwlwifi * fix initialization of 3168 devices (the infamous BAD_COMMAND bug) * other smaller fixes rt2x00 * don't include input-polldev.h header * fix hw reset to work during first 5 minutes of system run ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15drm/panfrost: Handle resetting on timeout betterSteven Price
Panfrost uses multiple schedulers (one for each slot, so 2 in reality), and on a timeout has to stop all the schedulers to safely perform a reset. However more than one scheduler can trigger a timeout at the same time. This race condition results in jobs being freed while they are still in use. When stopping other slots use cancel_delayed_work_sync() to ensure that any timeout started for that slot has completed. Also use mutex_trylock() to obtain reset_lock. This means that only one thread attempts the reset, the other threads will simply complete without doing anything (the first thread will wait for this in the call to cancel_delayed_work_sync()). While we're here and since the function is already dependent on sched_job not being NULL, let's remove the unnecessary checks. Fixes: aa20236784ab ("drm/panfrost: Prevent concurrent resets") Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Steven Price <steven.price@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
2019-10-15Merge branch 'parisc-5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix a parisc-specific fallout of Christoph's dma_set_mask_and_coherent() patches (Sven) - Fix a vmap memory leak in ioremap()/ioremap() (Helge) - Some minor cleanups and documentation updates (Nick, Helge) * 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove 32-bit DMA enforcement from sba_iommu parisc: Fix vmap memory leak in ioremap()/iounmap() parisc: prefer __section from compiler_attributes.h parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define MAINTAINERS: Add hp_sdc drivers to parisc arch
2019-10-15Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices
2019-10-15blk-rq-qos: fix first node deletion of rq_qos_del()Tejun Heo
rq_qos_del() incorrectly assigns the node being deleted to the head if it was the first on the list in the !prev path. Fix it by iterating with ** instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-18 02:33:04 +0000