Age | Commit message (Collapse) | Author |
|
Since b255ce4388e0, it is possible that the CRTC timing
information for the preferred mode has not yet been
calculated while amdgpu_dm_connector_mode_valid() is running.
In this case use the CRTC timing information of the actual mode.
Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()")
Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20232192a5044d1f66dcbef0a24de1bb8157738d)
Cc: stable@vger.kernel.org
|
|
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49)
Cc: stable@vger.kernel.org
|
|
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e)
|
|
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063)
Cc: stable@vger.kernel.org
|
|
If peer memory is accessible through XGMI, allow leaving it in VRAM
rather than forcing its migration to GTT on DMABuf attachment.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 372c8d72c3680fdea3fbb2d6b089f76b4a6d596a)
|
|
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738)
|
|
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ba8619b9a378ad218ad6c2e2ccaee8f531e08de)
Cc: stable@vger.kernel.org
|
|
[Why]
The indexing of stream_status in dm_gpureset_commit_state() is incorrect.
That leads to asserts in multi-display configuration after gpu reset.
[How]
Adjust the indexing logic to align stream_status with surface_updates.
Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d91bc901398741d317d9b55c59ca949d4bc7394b)
Cc: stable@vger.kernel.org
|
|
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae3695fe049c14847ce3cbeccff1bf2e)
|
|
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f5c ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6eefa555fec688a4adee5659ef9fa431)
|
|
Calculating the DSS id (index of a steered register) currently
requires reading state from the hwconfig table and that currently
requires dynamically allocating memory. The GuC based register capture
(for dev core dumps) includes this index as part of the register name
in the dump. However, it was calculating said index at the time of the
dump for every dump. That is wasteful. It also breaks anyone trying to
do the dump at a time when memory allocations are not allowed.
So rather than calculating on every print, just calculate at start of
day when creating the register list in the first place.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417213303.3021243-1-John.C.Harrison@Intel.com
|
|
The printing code was doing a test on which list a register was in to
decide whether it is steered or not. That might be valid at this
moment but there may be other reasons for extended lists in the
future. Plus, there is a flag specifically for identifying steered
registers. So, just use that instead - it is simpler and safer.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-3-John.C.Harrison@Intel.com
|
|
The list of registers to capture on a GPU hang includes some that
require steering. Unfortunately, the flag to say this was being wiped
to due a missing OR on the assignment of the next flag field.
Fix that.
Fixes: b170d696c1e2 ("drm/xe/guc: Add XE_LP steered register lists")
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-2-John.C.Harrison@Intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- subpage mode fixes:
- access correct object (folio) when looking up bit offset
- fix assertion condition for number of blocks per folio
- fix upper boundary of locking range in hole punch
- zoned fixes:
- fix potential deadlock caught by lockdep when zone reporting and
device freeze run in parallel
- fix zone write pointer mismatch and NULL pointer dereference when
metadata are converted from DUP to RAID1
- fix error handling when reloc inode creation fails
- in tree-checker, unify error code for header level check
- block layer: add helpers to read zone capacity
* tag 'for-6.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: skip reporting zone for new block group
block: introduce zone capacity helper
btrfs: tree-checker: adjust error code for header level check
btrfs: fix invalid inode pointer after failure to create reloc inode
btrfs: zoned: return EIO on RAID1 block group write pointer mismatch
btrfs: fix the ASSERT() inside GET_SUBPAGE_BITMAP()
btrfs: avoid page_lockend underflow in btrfs_punch_hole_lock_range()
btrfs: subpage: access correct object when reading bitmap start in subpage_calc_start_bit()
|
|
Pull integrity fix from Roberto Sassu:
"One performance fix to avoid unnecessarily taking the inode lock"
* tag 'integrity-6.15-rc3-fix' of https://github.com/linux-integrity/linux:
ima: process_measurement() needlessly takes inode_lock() on MAY_READ
|
|
xe_svm_range_alloc() returns ERR_PTR(-ENOMEM) on failure and there is a
dereference of "range" after that:
--> range->gpusvm = gpusvm;
In xe_svm_range_alloc(), when memory allocation fails return NULL
instead to handle this situation.
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/adaef4dd-5866-48ca-bc22-4a1ddef20381@stanley.mountain/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250323124907.3946370-1-harshit.m.mogalapalli@oracle.com
|
|
This reduces the slowdown in face of multiple callers issuing close on
what turns out to not be the last reference.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/20250418125756.59677-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202504171513.6d6f8a16-lkp@intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Davidlohr Bueso <dave@stgolabs.net> says:
This is a respin of the series[0] to address the sleep in atomic
scenarios for noref migration with large folios, introduced in:
3c20917120ce61 ("block/bdev: enable large folio support for large logical block sizes")
The main difference is that it removes the first patch and moves the fix
(reducing the i_private_lock critical region in the migration path) to
the final patch, which also introduces the new BH_Migrate flag. It also
simplifies the locking scheme in patch 1 to avoid folio trylocking in
the atomic lookup cases. So essentially blocking users will take the
folio lock and hence wait for migration, and otherwise nonblocking
callers will bail the lookup if a noref migration is on-going. Blocking
callers will also benefit from potential performance gains by reducing
contention on the spinlock for bdev mappings.
* patches from https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net:
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
fs/buffer: split locking for pagecache lookups
Link: https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The large folio + buffer head noref migration scenarios are
being naughty and blocking while holding a spinlock.
As a consequence of the pagecache lookup path taking the
folio lock this serializes against migration paths, so
they can wait for each other. For the private_lock
atomic case, a new BH_Migrate flag is introduced which
enables the lookup to bail.
This allows the critical region of the private_lock on
the migration path to be reduced to the way it was before
ebdf4de5642fb6 ("mm: migrate: fix reference check race
between __find_get_block() and migration"), that is covering
the count checks.
The scope is always noref migration.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: syzbot+f3c6fda1297c748a7076@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/oe-lkp/202503101536.27099c77-lkp@intel.com
Fixes: 3c20917120ce61 ("block/bdev: enable large folio support for large logical block sizes")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-8-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev # [0] [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable ext4_free_blocks() to use it, which has a cond_resched to begin
with. Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such that
semantics are kept.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-7-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such
that semantics are kept.
- jbd2_journal_revoke(): can sleep (has might_sleep() in the beginning)
- jbd2_journal_cancel_revoke(): only used from do_get_write_access() and
do_get_create_access() which do sleep. So can sleep.
- jbd2_clear_buffer_revoked_flags() - only called from journal commit code
which sleeps. So can sleep.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-6-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is a path that allows for blocking as it does IO. Convert
to the new nonatomic flavor to benefit from potential performance
benefits and adapt in the future vs migration such that semantics
are kept.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-5-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert to the new nonatomic flavor to benefit from potential performance
benefits and adapt in the future vs migration such that semantics
are kept.
Convert write_boundary_block() which already takes the buffer
lock as well as bdev_getblk() depending on the respective gpf flags.
There are no changes in semantics.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-4-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev # [0] [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add __find_get_block_nonatomic() and sb_find_get_block_nonatomic()
calls for which users will be converted where safe. These versions
will take the folio lock instead of the mapping's private_lock.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-3-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. However, HFS/HFS+ driver needs to stay
for Debian Ports as otherwise we won't be able to boot PowerMacs
using GRUB because GRUB won't be usable anymore on PowerMacs with
HFS/HFS+ being removed from the kernel.
This patch proposes to add Viacheslav Dubeyko and
John Paul Adrian Glaubitz as maintainers of HFS/HFS+ driver.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/20250417223507.1097186-1-slava@dubeyko.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Callers of __find_get_block() may or may not allow for blocking
semantics, and is currently assumed that it will not. Layout
two paths based on this. The the private_lock scheme will
continued to be used for atomic contexts. Otherwise take the
folio lock instead, which protects the buffers, such as
vs migration and try_to_free_buffers().
Per the "hack idea", the latter can alleviate contention on
the private_lock for bdev mappings. For reasons of determinism
and avoid making bugs hard to reproduce, the trylocking is not
attempted.
No change in semantics. All lookup users still take the spinlock.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-2-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the select of PRIME_MUMBERS was removed from it's KUnit test
Kconfig nothing was added to the KUnit configs, meaning that when run
via the KUnit runner the tests are neither built nor run. Add
PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit
runner builds the kernel.
Fixes: 3f2925174f8b ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When a reserved memory region described in the device tree is attached
to a device, it is expected that the device's limitations are correctly
included in that description.
However, if the device driver failed to implement DMA address masking
or addressing beyond the default 32 bits (on arm64), then bad things
could happen because the DMA address was truncated, such as playing
back audio with no actual audio coming out, or DMA overwriting random
blocks of kernel memory.
Check against the coherent DMA mask when the memory regions are attached
to the device. Give a warning when the memory region can not be covered
by the mask.
A warning instead of a hard error was chosen, because it is possible
that existing drivers could be working fine even if they forgot to
extend the coherent DMA mask.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250421083930.374173-1-wenst@chromium.org
|
|
This method limits the scope of the revocable guard and is considered
safer to use for most cases, so let's showcase it here.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250411-try_with-v4-2-f470ac79e2e2@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Revocable::try_access() returns a guard through which the wrapped object
can be accessed. Code that can sleep is not allowed while the guard is
held; thus, it is common for the caller to explicitly drop it before
running sleepable code, e.g:
let b = bar.try_access()?;
let reg = b.readl(...);
// Don't forget this or things could go wrong!
drop(b);
something_that_might_sleep();
let b = bar.try_access()?;
let reg2 = b.readl(...);
This is arguably error-prone. try_access_with() provides an arguably
safer alternative, by taking a closure that is run while the guard is
held, and by dropping the guard automatically after the closure
completes. This way, code can be organized more clearly around the
critical sections and the risk of forgetting to release the guard when
needed is considerably reduced:
let reg = bar.try_access_with(|b| b.readl(...))?;
something_that_might_sleep();
let reg2 = bar.try_access_with(|b| b.readl(...))?;
The closure can return nothing, or any value including a Result which is
then wrapped inside the Option returned by try_access_with. Error
management is driver-specific, so users are encouraged to create their
own macros that map and flatten the returned values to something
appropriate for the code they are working on.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250411-try_with-v4-1-f470ac79e2e2@nvidia.com
[ Link `None`, `Some`, `Option` in doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
On IMA policy update, if a measure rule exists in the policy,
IMA_MEASURE is set for ima_policy_flags which makes the violation_check
variable always true. Coupled with a no-action on MAY_READ for a
FILE_CHECK call, we're always taking the inode_lock().
This becomes a performance problem for extremely heavy read-only workloads.
Therefore, prevent this only in the case there's no action to be taken.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Remove the duplicated section and while at it, turn spaces into tabs.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fixes: c7b67ddc3c99 ("xfs: document zoned rt specifics in admin-guide")
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_zoned_need_gc makes use of mult_frac() to calculate the threshold
for triggering the zoned garbage collector, but, turns out mult_frac()
doesn't properly work with 64-bit data types and this caused build
failures on some 32-bit architectures.
Fix this by essentially open coding mult_frac() in a 64-bit friendly
way.
Notice we don't need to bother with counters underflow here because
xfs_estimate_freecounter() will always return a positive value, as it
leverages percpu_counter_read_positive to read such counters.
Fixes: 845abeb1f06a ("xfs: add tunable threshold parameter for triggering zone GC")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504181233.F7D9Atra-lkp@intel.com/
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If an error occurs after a successful stm32_ospi_dma_setup() call, some
dma_release_channel() calls are needed to release some resources, as
already done in the remove function.
Fixes: 79b8a705e26c ("spi: stm32: Add OSPI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/2674c8df1d05ab312826b69bfe9559f81d125a0b.1744975624.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now there are no users of the return value of the drm_panel_prepare(),
drm_panel_unprepare(), drm_panel_enable() and drm_panel_disable() calls.
Usually these calls are performed from the atomic callbacks, where it is
impossible to return an error. Stop returning error codes and return
void instead.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-7-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Follow the example of other drivers and ignore return values of the
drm_panel_prepare() / unprepare() / enable() / disable() calls. There is
no possible error recovery, so the driver just logs a message.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-6-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The analogix_dp_prepare_panel() is now only calling a corresponding
drm_panel function. Inline it to simplify the code.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-5-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The analogix_dp_prepare_panel() function is called from bridge's
atomic_pre_enable() and atomic_post_disable() callbacks, which can not
happen simultaneously. Drop the useless mutex.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-4-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The dp->panel_is_modeset is now a write-only field. Drop it completely.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-3-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
After previous cleanup all calling sites pass true as is_modeset_prepare
argument to analogix_dp_prepare_panel(). Drop dead code depending on
that argument being false.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-2-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The analogix_dp_prepare_panel() returns immediately if there is no
attached panel. Drop several calls to this function which are performed
when dp->plat_data->panel is NULL.
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250401-panel-return-void-v1-1-93e1be33dc8d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In lwtunnel_{output|xmit}(), dev_xmit_recursion() may be called in
preemptible scope for PREEMPT kernels. This patch disables BHs before
calling dev_xmit_recursion(). BHs are re-enabled only at the end, since
we must ensure the same CPU is used for both dev_xmit_recursion_inc()
and dev_xmit_recursion_dec() (and any other recursion levels in some
cases) in order to maintain valid per-cpu counters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/netdev/CAADnVQJFWn3dBFJtY+ci6oN1pDFL=TzCmNbRgey7MdYxt_AP2g@mail.gmail.com/
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/netdev/m2h62qwf34.fsf@gmail.com/
Fixes: 986ffb3a57c5 ("net: lwtunnel: fix recursion loops")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160716.8823-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Zero-initialize TCP header via memset() to avoid garbage values that
may affect checksum or behavior during test transmission.
Also zero-fill allocated payload and padding regions using memset()
after skb_put(), ensuring deterministic content for all outgoing
test packets.
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250416160125.2914724-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lkp reported a warning about missing prototype for a recent patch.
The kernel-doc style comments are out of sync, move them to the right
function.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
[mszyprow: reformatted subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
|
|
log context:seqno of the fence during timeout rather
than logging fence pointer.
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is load usermode queue based on FW support for gfx12.
CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123]
v2: Addressed review comments from Alex
- Just check the firmware versions directly.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]
v2: Addressed review comments from Alex.
- Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit updates the dm_force_atomic_commit function to replace the
usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after
retrieving the Connector (drm_atomic_get_connector_state), CRTC
(drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state)
states.
The function utilized PTR_ERR_OR_ZERO for error checking. However, this
approach is inappropriate in this context because the respective
functions do not return NULL; they return pointers that encode errors.
This change ensures that error pointers are properly checked using
IS_ERR before attempting to dereference.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
suspend/resume -> evict/restore
Rename to avoid confusion with the system suspend
and resume helpers.
v2: update error messages
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|