summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-24x86/apic: Do not init irq remapping if ioapic is disabledWanpeng Li
native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-24timekeeping: Cap array access in timekeeping_debugJohn Stultz
It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f24ab "power: Add option to log time spent in suspend" Reported-by: Janek Kozicki <cosurgi@gmail.com> Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xunlei Pang <xpang@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: stable <stable@vger.kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-24timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPINGJohn Stultz
When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c2648f9 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: stable <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-23Merge branch 'remove-clear_sk'David S. Miller
Eric Dumazet says: ==================== net: remove clear_sk() method Since IPv6 socket lookups no longer dereference pinet6 pointer and UDP lost SLAB_DESTROY_BY_RCU special rules, we no longer need special clear_sk() methods. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: remove clear_sk() methodEric Dumazet
We no longer use this handler, we can delete it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23ipv6: tcp: get rid of tcp_v6_clear_sk()Eric Dumazet
Now RCU lookups of IPv6 TCP sockets no longer dereference pinet6, we do not need tcp_v6_clear_sk() anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: get rid of sk_prot_clear_portaddr_nulls()Eric Dumazet
Since we no longer use SLAB_DESTROY_BY_RCU for UDP, we do not need sk_prot_clear_portaddr_nulls() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23ipv6: udp: remove udp_v6_clear_sk()Eric Dumazet
Now RCU lookups of ipv6 udp sockets no longer dereference pinet6 field, we can get rid of udp_v6_clear_sk() helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: diag: support SOCK_DESTROY for UDP socketsDavid Ahern
This implements SOCK_DESTROY for UDP sockets similar to what was done for TCP with commit c1e64e298b8ca ("net: diag: Support destroying TCP sockets.") A process with a UDP socket targeted for destroy is awakened and recvmsg fails with ECONNABORTED. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: diag: Fix refcnt leak in error path destroying socketDavid Ahern
inet_diag_find_one_icsk takes a reference to a socket that is not released if sock_diag_destroy returns an error. Fix by changing tcp_diag_destroy to manage the refcnt for all cases and remove the sock_put calls from tcp_abort. Fixes: c1e64e298b8ca ("net: diag: Support destroying TCP sockets") Reported-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tun: fix transmit timestamp supportSoheil Hassas Yeganeh
Instead of using sock_tx_timestamp, use skb_tx_timestamp to record software transmit timestamp of a packet. sock_tx_timestamp resets and overrides the tx_flags of the skb. The function is intended to be called from within the protocol layer when creating the skb, not from a device driver. This is inconsistent with other drivers and will cause issues for TCP. In TCP, we intend to sample the timestamps for the last byte for each sendmsg/sendpage. For that reason, tcp_sendmsg calls tcp_tx_timestamp only with the last skb that it generates. For example, if a 128KB message is split into two 64KB packets we want to sample the SND timestamp of the last packet. The current code in the tun driver, however, will result in sampling the SND timestamp for both packets. Also, when the last packet is split into smaller packets for retranmission (see tcp_fragment), the tun driver will record timestamps for all of the retransmitted packets and not only the last packet. Fixes: eda297729171 (tun: Support software transmit time stamping.) Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Francis Yan <francisyyan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tipc: use kfree_skb() instead of kfree()Wei Yongjun
Use kfree_skb() instead of kfree() to free sk_buff. Fixes: 0d051bf93c06 ("tipc: make bearer packet filtering generic") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: get rid of SLAB_DESTROY_BY_RCU allocationsEric Dumazet
After commit ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU") we do not need this special allocation mode anymore, even if it is harmless. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ena: change the return type of ena_set_push_mode() to be void.Rami Rosen
This patch changes the return type of ena_set_push_mode() to be void, as it always returns 0. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'for-f2fs-v4.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: - fsmark regression - i_size race condition - wrong conditions in f2fs_move_file_range * tag 'for-f2fs-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: avoid potential deadlock in f2fs_move_file_range f2fs: allow copying file range only in between regular files Revert "f2fs: move i_size_write in f2fs_write_end" Revert "f2fs: use percpu_rw_semaphore"
2016-08-23sctp: fix overrun in sctp_diag_dump_one()Lance Richardson
The function sctp_diag_dump_one() currently performs a memcpy() of 64 bytes from a 16 byte field into another 16 byte field. Fix by using correct size, use sizeof to obtain correct size instead of using a hard-coded constant. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Lance Richardson <lrichard@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'rxrpc-rewrite-20160823-2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Miscellaneous improvements Here are some improvements that are part of the AF_RXRPC rewrite. They need to be applied on top of the just posted cleanups. (1) Set the connection expiry on the connection becoming idle when its last currently active call completes rather than each time put is called. This means that the connection isn't held open by retransmissions, pings and duplicate packets. Future patches will limit the number of live connections that the kernel will support, so making sure that old connections don't overstay their welcome is necessary. (2) Calculate packet serial skew in the UDP data_ready callback rather than in the call processor on a work queue. Deferring it like this causes the skew to be elevated by further packets coming in before we get to make the calculation. (3) Move retransmission of the terminal ACK or ABORT packet for a connection to the connection processor, using the terminal state cached in the rxrpc_connection struct. This means that once last_call is set in a channel to the current call's ID, no more packets will be routed to that rxrpc_call struct. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'rxrpc-rewrite-20160823-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Cleanups Here are some cleanups for the AF_RXRPC rewrite: (1) Remove some unused bits. (2) Call releasing on socket closure is now done in the order in which calls progress through the phases so that we don't miss a call actively moving list. (3) The rxrpc_call struct's channel number field is redundant and replaced with accesses to the masked off cid field instead. (4) Use a tracepoint for socket buffer accounting rather than printks. Unfortunately, since this would require currently non-existend arch-specific help to divine the current instruction location, the accounting functions are moved out of line so that __builtin_return_address() can be used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: hns: remove redundant dev_err call in hns_dsaf_get_cfg()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23cxgb4: Remove unused including <linux/version.h>Wei Yongjun
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: phy: xgmiitorgmii: Fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/phy/xilinx_gmii2rgmii.c:61:5: warning: symbol 'xgmiitorgmii_probe' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23qede: Add support for Tx/Rx-only queues.Sudarsana Reddy Kalluru
Add provision for configuring the fastpath queues with Tx (or Rx) only functionality. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23dwc_eth_qos: fix interrupt enable raceRabin Vincent
We currently enable interrupts before we enable NAPI. If an RX interrupt hits before we enabled NAPI then the NAPI callback is never called and we leave the hardware with RX interrupts disabled, which of course leads us to never handling received packets. Fix this by moving the interrupt enable to after we've enable NAPI and the reclaim tasklet. Fixes: cd5e41234729 ("dwc_eth_qos: do phy_start before resetting hardware") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: lpc_eth: Check clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure While at it, replace __lpc_eth_clock_enable() with a plain clk_prepare_enable/clk_disable_unprepare() call in order to simplify the code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: rtnetlink: Don't export empty RTAX_FEATURESPhil Sutter
Since the features bit field has bits for internal only use as well, it may happen that the kernel exports RTAX_FEATURES attribute with zero value which is pointless. Fix this by making sure the attribute is added only if the exported value is non-zero. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23cxgb4: Fix issue while re-registering VF mgmt netdevHariprasad Shenai
When we disable SRIOV, we used to unregister the netdev but wasn't freed. But next time when the same netdev is registered, since the state was in 'NETREG_UNREGISTERED', we used to hit BUG_ON in register_netdevice, where it expects the state to be 'NETREG_UNINITIALIZED'. Alloc netdev and register them while configuring SRIOV, and free them when SRIOV is disabled. Also added a new function to setup ethernet properties instead of using ether_setup. Set carrier off by default, since we don't have to do any transmit on the interface. Fixes: 7829451c695e ("cxgb4: Add control net_device for configuring PCIe VF") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net-tcp: retire TFO_SERVER_WO_SOCKOPT2 configYuchung Cheng
TFO_SERVER_WO_SOCKOPT2 was intended for debugging purposes during Fast Open development. Remove this config option and also update/clean-up the documentation of the Fast Open sysctl. Reported-by: Piotr Jurkiewicz <piotr.jerzy.jurkiewicz@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23xen-netback: using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: mv88e6xxx: Fix ingress rate removal for mv6131 chipsJamie Lentin
The PORT_RATE_CONTROL register works differently on 88e6095/6095f/6131 in comparison to 6123/61/65, and 0x0 disables. The distinction was lost Linux 4.1 --> 4.2 Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23phy: micrel: Reenable interrupts during resume for ksz9031Xander Huff
Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt enable bits when leaving power down. This takes advantage of the solution provided by f5aba91. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tcp: properly scale window in tcp_v[46]_reqsk_send_ack()Eric Dumazet
When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23liquidio: declare liquidio_set_rxcsum_command staticNicholas Mc Guire
liquidio_set_rxcsum_command is a local function only, no need to expose it outside of lio_main.c so declare it static and make sparse happy. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23l2tp: Refactor the codes with existing macros instead of literal numberGao Feng
Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by: Gao Feng <fgao@ikuai8.com> Acked-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: fix size of scatter-gathered framesZefir Kurtisi
The current scatter-gather logic in gianfar is flawed, since it does not consider the eTSEC's RxBD 'Data Length' field is context depening: for the last fragment it contains the full frame size, while fragments contain the fragment size, which equals the value written to register MRBLR. This causes data corruption as soon as the hardware starts to fragment receiving frames. As a result, the size of fragmented frames is increased by (nr_frags - 1) * MRBLR We first noticed this issue working with DSA, where an ICMP request sized 1472 bytes causes the scatter-gather logic to kick in. The full Ethernet frame (1518) gets increased by DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER (priv->padding=8) to a total of 1538 octets, which is fragmented by the hardware and reconstructed by the driver to a 3074 octet frame. This patch fixes the problem by adjusting the size of the last fragment. It was tested by setting MRBLR to different multiples of 64, proving correct scatter-gather operation on frames with up to 9000 octets in size. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: prevent fragmentation in DSA environmentsZefir Kurtisi
The eTSEC register MRBLR defines the maximum space in the RX buffers and is set to 1536 by gianfar. This reasonably covers the common use case where the MTU is kept at default 1500. In that case, the largest Ethernet frame size of 1518 plus an optional GMAC_FCB_LEN of 8, and an additional padding of 8 to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534 and nicely fit within the chosen MRBLR. Alas, if the eTSEC is attached to a DSA enabled switch, the (E)DSA header extension (4 or 8 bytes) causes every maximum sized frame to be fragmented by the hardware. This patch increases the maximum RX buffer size by 8 and rounds up to the next multiple of 64, which the hardware's defines as RX buffer granularity. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: fix poll() issue with zero sized packetsEric Dumazet
Laura tracked poll() [and friends] regression caused by commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") udp_poll() needs to know if there is a valid packet in receive queue, even if its payload length is 0. Change first_packet_length() to return an signed int, and use -1 as the indication of an empty queue. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge branch 'strp-kcm-fixes'David S. Miller
Tom Herbert says: ==================== strp: Minor fixes to strparser and kcm Fix locking issue in kcm and losing events when paused. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23kcm: Fix locking issueTom Herbert
Lock the lower socket in kcm_unattach. Release during call to strp_done since that function cancels the RX timers and work queue with sync. Also added some status information in psock reporting. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23strparser: Queue work when being unpausedTom Herbert
When the upper layer unpauses a stream parser connection we need to queue rx_work to make sure no events are missed. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'iio-fixes-for-4.8a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus Jonathan writes: First round of IIO fixes for the 4.8 cycle. This is somewhat of a bumper set due to my unavailabilty earlier in the month. The only slightly unusual ones are the dts updates for the rockchip adc reset. The fix in the driver only makes sense with these and the rockchip maintainer is happy with them going through IIO to reach mainline. Core stuff * Fix an issue with a blocking op when !TASK_RUNNING. This been there a while and snuck in with seemingly minor additions to some core code paths. * Tools - generic_buffer failed to initialize the channel array pointer thus in the case of no channels blows up trying to free a random memory address. * sw-trigger: - Fix config group initialization when configfs is built as a module. Drivers * ad5933 - Fix an incorrect overwrite of an error value. * ad799x - A missed assignment of the update_scan_mode callback means buffered mode doesn't work on the ad7991, ad7995 or ad7999. * ads1015 - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions) * am2315 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - missing buffer selects in Kconfig * am335x adc - Protect fifo1 from concurrent access. - Increase timeout waiting for ADC to be long enough in all cases. * as3935 - Timestamps are reported, but never actually acquired from anywhere (so always 0) * at91 - Fix reading of channel 3. * atlas-ph-sensor - Typo means that the scale of electrical conductivity readings is way off. * bma220 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - Missing buffer selects in Kconfig * bmp280 - pass the write pointer to PTR_ERR (i.e. the one that was just checked with IS_ERR). - suspend /resume crash due to wrong assumption about what dev_get_drvdata would return. * hdc100x - It superficially appeared that smbus_read_byte commands would allow reading of the outputs in two goes. In reality it doesn't work, but instead returns the same for the upper and lower bytes (nice catch from Alison!) * kxsd9 - Fix raw read return value to ensure it actually reports the value rather than a blank string. * max44000 - Missing buffer selects in Kconfig * rockchip_saradc - Add use of reset controller to enforce a clean state of the ADC. Some bootloaders can leave it in an 'intersting' state and effectively frozen without this. A couple of associated dts updates. * stk8ba50 - Missing buffer selects in Kconfig * stx104 - Fix a possible race due to use of devm_iio_device_register when there was other stuff in the remove function.
2016-08-23x86/PCI: VMD: Fix infinite loop executing irq'sKeith Busch
We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23um: Don't discard .text.exit sectionAndrey Ryabinin
Commit e41f501d3912 ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d3912 ("vmlinux.lds: account for destructor sections") Reported-by: Stefan Traby <stefan@hello-penguin.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23ubifs: Fix xattr generic handler usageRichard Weinberger
UBIFS uses full names to work with xattrs, therefore we have to use xattr_full_name() to obtain the xattr prefix as string. Cc: <stable@vger.kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Fixes: 2b88fc21ca ("ubifs: Switch to generic xattr handlers") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Tested-by: Dongsheng Yang <dongsheng081251@gmail.com>
2016-08-23ubifs: Fix assertion in layout_in_gaps()Vincent Stehlé
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23USB: avoid left shift by -1Alan Stern
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-23Merge branch 'hv_netvsc-cleanups'David S. Miller
Stephen Hemminger says: ==================== Hyper-V network driver cleanups. The only new functionality is minor extensions to ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: add ethtool statistics for tx packet issuesStephen Hemminger
Printing console messages is not helpful when system is out of memory; and can be disastrous with netconsole. Instead keep statistics of these anomalous conditions. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: report vmbus name in ethtoolStephen Hemminger
Make netvsc on vmbus behave more like PCI. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make variable localStephen Hemminger
The variable m_ret is only used in one basic block. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make netvsc_destroy_buf voidStephen Hemminger
No caller checks the return value. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 20:20:27 +0000