summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-31Merge branch 'liquidio-CN23XX-part-1'David S. Miller
Raghu Vatsavayi says: ==================== liquidio CN23XX support Following patchset adds support for new device "CN23XX" in liquidio family of adapters. As adviced by you I have split the previous V3 patch of 18 patches into two halves. This first patchset has first 10 patches, which are tested against net-next. I will post the second half after this one. This V4 patch also addressed all the comments from previous submission: 1) Avoid busy loop while reading registers. 2) Other minor comments about debug messages and constants. Please apply patches in following order as some of the patches depend on earlier patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX firmware downloadRaghu Vatsavayi
Add firmware download support for cn23xx device. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: MSIX support for CN23XXRaghu Vatsavayi
This patch adds support msix interrupt for cn23xx device. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX queue manipulationRaghu Vatsavayi
This patch adds support for cn23xx queue manipulation. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX register setupRaghu Vatsavayi
Adds support for initializing cn23xx device registers related to mac, input/output and pf global config. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX device init and sriov configRaghu Vatsavayi
Add support for cn23xx device init and sriov queue config. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX queue definitionsRaghu Vatsavayi
Add support for cn23xx specific queue definitions and features. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: CN23XX register definitionsRaghu Vatsavayi
This patch adds register definitions and structures for new device cn23xx. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: Common enable irq functionRaghu Vatsavayi
Add support of common irq enable functionality for both iq(instruction queue) and oq(output queue). Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: Firmware version managementRaghu Vatsavayi
This patch contains changes for firmware version management. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31liquidio: Consolidate common functionalityRaghu Vatsavayi
Consolidate common functionality of various devices from different files into lio_core.c/octeon_console.c. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie
into drm-fixes copy from user fixes. * 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux: drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock
2016-08-31audit: fix exe_file access in audit_exe_compareMateusz Guzik
Prior to the change the function would blindly deference mm, exe_file and exe_file->f_inode, each of which could have been NULL or freed. Use get_task_exe_file to safely obtain stable exe_file. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Richard Guy Briggs <rgb@redhat.com> Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-08-31mm: introduce get_task_exe_fileMateusz Guzik
For more convenient access if one has a pointer to the task. As a minor nit take advantage of the fact that only task lock + rcu are needed to safely grab ->exe_file. This saves mm refcount dance. Use the helper in proc_exe_link. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Richard Guy Briggs <rgb@redhat.com> Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-09-01Merge branch 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.8: - 2 CI S4 fixes - error handling fix * 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: record error code when ring test failed drm/amd/amdgpu: compute ring test fail during S4 on CI drm/amd/amdgpu: sdma resume fail during S4 on CI
2016-08-31drm/amdgpu: record error code when ring test failedChunming Zhou
Otherwise we may miss errors. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: compute ring test fail during S4 on CIjimqu
unhalt Instrction Fetch Unit after all rings are inited. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: sdma resume fail during S4 on CIjimqu
SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Kconfig problem that prevented mxc-rnga from being enabled - bogus key sizes in qat aes-xts - buggy aes-xts code in vmx" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - fix null dereference in p8_aes_xts_crypt crypto: qat - fix aes-xts key sizes hwrng: mxc-rnga - Fix Kconfig dependency
2016-08-31bridge: re-introduce 'fix parsing of MLDv2 reports'Davide Caratti
commit bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce0c2f ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: wan: sbni: Spelling s/acknoweledge/acknowledge/, GrammarGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: systemport: constify ethtool_ops structuresJulia Lawall
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31dwc_eth_qos: constify ethtool_ops structuresJulia Lawall
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: hisilicon: constify ethtool_ops structuresJulia Lawall
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: bcmgenet: constify ethtool_ops structuresJulia Lawall
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: ethernet: et131x: constify ethtool_ops structuresJulia Lawall
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31binfmt_elf: switch to new creds when switching to new mmLinus Torvalds
We used to delay switching to the new credentials until after we had mapped the executable (and possible elf interpreter). That was kind of odd to begin with, since the new executable will actually then _run_ with the new creds, but whatever. The bigger problem was that we also want to make sure that we turn off prof events and tracing before we start mapping the new executable state. So while this is a cleanup, it's also a fix for a possible information leak. Reported-by: Robert Święcki <robert@swiecki.net> Tested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-31crypto: caam - fix IV loading for authenc (giv)decryptionHoria Geantă
For algorithms that implement IV generators before the crypto ops, the IV needed for decryption is initially located in req->src scatterlist, not in req->iv. Avoid copying the IV into req->iv by modifying the (givdecrypt) descriptors to load it directly from req->src. aead_givdecrypt() is no longer needed and goes away. Cc: <stable@vger.kernel.org> # 4.3+ Fixes: 479bcc7c5b9e ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-31crypto: cryptd - Use correct tfm object for AEAD trackingHerbert Xu
The AEAD code path incorrectly uses the child tfm to track the cryptd refcnt, and then potentially frees the child tfm. Fixes: 81760ea6a95a ("crypto: cryptd - Add helpers to check...") Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-31serial: 8250: added acces i/o products quad and octal serial cardsJimi Damon
Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon <jdamon@accesio.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31ALSA: fireworks: accessing to user space outside spinlockTakashi Sakamoto
In hwdep interface of fireworks driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handles the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it don't handle usual interrupts from hardware. This commit fixes this bug, performing the accessing outside spinlock. This commit also gives up counting the number of queued response messages to simplify ring-buffer management. Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Cc: stable@vger.kernel.org Fixes: 555e8a8f7f14('ALSA: fireworks: Add command/response functionality into hwdep interface') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-31serial: 8250_mid: fix divide error bug if baud rate is 0Andy Shevchenko
Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com> Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31Revert "tty/serial/8250: use mctrl_gpio helpers"Andy Shevchenko
Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31sysfs: correctly handle read offset on PREALLOC attrsKonstantin Khlebnikov
Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns zero bytes for non-zero offset. This breaks script checkarray in mdadm tool in debian where /bin/sh is 'dash' because its builtin 'read' reads only one byte at a time. Script gets 'i' instead of 'idle' when reads current action from /sys/block/$dev/md/sync_action and as a result does nothing. This patch adds trivial implementation of partial read: generate whole string and move required part into buffer head. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 4ef67a8c95f3 ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950 Cc: Stable <stable@vger.kernel.org> # v3.19+ Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31documentation: drivers/core/of: fix name of of_node symlinkMartin Fuzzey
commit 5590f3196b29 ("drivers/core/of: Add symlink to device-tree from devices with an OF node") added a symlink called "of_node" to sysfs however the documentation describes it as "of_path". Fix the documentation to match what the code actually does. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31kernfs: don't depend on d_find_any_alias() when generating notificationsTejun Heo
kernfs_notify_workfn() sends out file modified events for the scheduled kernfs_nodes. Because the modifications aren't from userland, it doesn't have the matching file struct at hand and can't use fsnotify_modify(). Instead, it looked up the inode and then used d_find_any_alias() to find the dentry and used fsnotify_parent() and fsnotify() directly to generate notifications. The assumption was that the relevant dentries would have been pinned if there are listeners, which isn't true as inotify doesn't pin dentries at all and watching the parent doesn't pin the child dentries even for dnotify. This led to, for example, inotify watchers not getting notifications if the system is under memory pressure and the matching dentries got reclaimed. It can also be triggered through /proc/sys/vm/drop_caches or a remount attempt which involves shrinking dcache. fsnotify_parent() only uses the dentry to access the parent inode, which kernfs can do easily. Update kernfs_notify_workfn() so that it uses fsnotify() directly for both the parent and target inodes without going through d_find_any_alias(). While at it, supply the target file name to fsnotify() from kernfs_node->name. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Fixes: d911d9874801 ("kernfs: make kernfs_notify() trigger inotify events too") Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31ALSA: firewire-tascam: accessing to user space outside spinlockTakashi Sakamoto
In hwdep interface of firewire-tascam driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handle the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it doesn't handle usual interrupts from hardware. This commit fixes this bug, by performing the accessing outside spinlock. Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Cc: stable@vger.kernel.org Fixes: e5e0c3dd257b('ALSA: firewire-tascam: add hwdep interface') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-31thunderbolt: Don't declare Falcon Ridge unsupportedLukas Wunner
Falcon Ridge 4C has been supported by the driver from the beginning, Falcon Ridge 2C support was just added. Don't irritate users with a warning declaring the opposite. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.Xavier Gnata
From: Xavier Gnata <xavier.gnata@gmail.com> Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk to support suspend/resume. Tested against 4.7 master on a MacBook Air 11" 2015. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Fix resume quirk for Falcon Ridge 4C.Andreas Noever
The quirk 'quirk_apple_wait_for_thunderbolt' did not fire on Falcon Ridge 4C controllers with subdevice/subvendor set to zero. This lead to lost pci devices on system resume. Older thunderbolt controllers (pre Falcon Ridge) used the same device id for bridges and for the controller. On Apple hardware the subvendor- & subdevice-ids were set for the controller, but not for bridges. So that is what was used to differentiate between the two. Starting with Falcon Ridge bridges and controllers received different device ids. Additionally on some MacBookPro models (but not all) the subvendor/subdevice was zeroed. Starting with a42fb351c (thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller) the thunderbolt driver binds to all Falcon Ridge 4C controllers (irregardless of subvendor/subdevice). The corresponding quirk was not updated. This commit changes the quirk to check the device class instead of its subvendor-/subdeviceids. This works for all generations of Thunderbolt controllers. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31lkdtm: Mark lkdtm_rodata_do_nothing() notraceMichael Ellerman
lkdtm_rodata_do_nothing() is an empty function which is generated in order to test the non-executability of rodata. Currently if function tracing is enabled then an mcount callsite will be generated for lkdtm_rodata_do_nothing(), and it will appear in the list of available functions for function tracing (available_filter_functions). Given it's purpose purely as a test function, it seems preferable for lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as traceable. This also avoids triggering a linker bug on powerpc: https://sourceware.org/bugzilla/show_bug.cgi?id=20428 When the linker sees code that needs to generate a call stub, eg. a branch to mcount(), it assumes the section is executable and dereferences a NULL pointer leading to a linker segfault. Marking lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the function contains no other function calls. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31wil6210: extract firmware version from file headerLior David
Currently the FW version is taken from the sw_version field of the FW ready event. This version is based on internal version control revision and it is difficult to map to actual FW version. Fix this by using the actual FW version stored in the FW file header record. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31wil6210: extract firmware capabilities from FW fileLior David
When driver is loaded, extract a capabilities record from the FW file. This record contains bits indicating which optional features are supported by this FW. The driver can use this information to determine which functionality to support and/or expose to user space. The extraction is done before wiphy structure is registered, because the capabilities can affect information published by the this structure. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31wil6210: align to latest auto generated wmi.hLior David
Align to latest version of the auto generated wmi file describing the interface with FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31wil6210: fix protection of wil->scan_requestLior David
Currently the places that check wil->scan_request and call cfg80211_scan_done are not consistently protected, so there is a risk that cfg80211_scan_done will be called with NULL scan_request, causing a kernel crash. Fix this by using p2p_wdev_mutex in few other places that access scan_request. This makes sense since scan_request may point to p2p_wdev, and it is not worth the extra complexity of adding a new mutex. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: fix spurious tx/rx during bootMichal Kazior
HW Rx filters and masks are not configured properly by firmware during boot sequences. The MAC_PCU_ADDR1 is set to 0s instead of 1s which allows the HW to ACK any frame that passes through MAC_PCU_RX_FILTER. The MAC_PCU_RX_FILTER itself is misconfigured on boot as well. The combination of these bugs ended up with the following manifestations: - "no channel configured; ignoring frame(s)!" warnings in the driver - spurious ACKs (transmission) on the air during firmware bootup sequences The former was a long standing and known bug originally though mostly harmless. However Marek recently discovered that this problem also involves ACKing *all* frames the HW receives (including beacons ;). Such frames are delivered to host and generate the former warning as well. This could be a problem with regulatory compliance in some rare cases (e.g. Taiwan which forbids transmissions on channel 36 which is the default bootup channel on 5Ghz band cards). The good news is that it'd require someone else to violate regulatory first to coerce our device to generate and transmit an ACK. The problem could be reproduced in a rather busy environment that has a lot of APs. The likelihood could be increased by injecting an msleep() of 5000 or longer immediately after ath10k_htt_setup() in ath10k_core_start(). The reason why the former warnings were only showing up seldom is because the device was either quickly reset again (i.e. during firmware probing) or wmi vdev was created (which fixes hw and fw states). It is technically possible for host driver to override adequate hw registers however this can't work reliably because the bug root cause lies in incorrect firmware state on boot (internal structure used to program MAC_PCU_ADDR1 is not properly initialized) and only vdev create/delete events can fix it. This is why the patch takes dummy vdev approach. This could be fixed in firmware as well but having this fixed in driver is more robust, most notably when thinking of users of older firmware such as 999.999.0.636. Reported-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: add wmi command barrier utilityMichal Kazior
This allows placing command barriers for explicit serializing and synchronizing state. Useful for future driver development. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: implement wmi echo eventMichal Kazior
Will be useful for implementing command barriers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: implement wmi echo commandMichal Kazior
Will be useful for implementing command barriers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31ath10k: add testmode support for 10.4 firmwareTamizh chelvam
This patch adds testmode support for 10.4 based chipsets and added code swap support for UTF binary. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-13 09:38:25 +0000