| Age | Commit message (Collapse) | Author |
|---|
|
It's not safe to access the next CQ in list_for_each_entry() after
invoking ib_free_cq(), because the CQ has already been freed in current
iteration. It should be replaced by list_for_each_entry_safe().
Fixes: c7ff819aefea ("RDMA/core: Introduce shared CQ pool API")
Link: https://lore.kernel.org/r/1598963935-32335-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull xfs fixes from Darrick Wong:
"Various small corruption fixes that have come in during the past
month:
- Avoid a log recovery failure for an insert range operation by
rolling deferred ops incrementally instead of at the end.
- Fix an off-by-one error when calculating log space reservations for
anything involving an inode allocation or free.
- Fix a broken shortform xattr verifier.
- Ensure that the shortform xattr header padding is always
initialized to zero"
* tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: initialize the shortform attr header padding entry
xfs: fix boundary test in xfs_attr_shortform_verify
xfs: fix off-by-one in inode alloc block reservation calculation
xfs: finish dfops on every insert range shift iteration
|
|
The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when
len=131071 and rx_offset >= 5:
spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE
...
with iteration values: len = 131071, tx_off = 0, rx_off = 3
with iteration values: len = 131071, tx_off = 0, rx_off = 4
with iteration values: len = 131071, tx_off = 0, rx_off = 5
loopback strangeness - rx changed outside of allowed range at: ...a4321000
spi_msg@ffffffd5a4157690
frame_length: 131071
actual_length: 131071
spi_transfer@ffffffd5a41576f8
len: 131071
tx_buf: ffffffd5a4340ffc
Note that rx_offset > 3 can only occur if the SPI controller driver sets
->dma_alignment to a higher value than 4, so most SPI controller drivers
are not affect.
The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132
KiB (assuming 4 KiB pages). This test uses an initial offset into the
rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to
be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB,
which is also the end of the allocated buffer. But the code which
verifies the content of the buffer reads a byte beyond the allocated
buffer and spuriously fails because this out-of-bounds read doesn't
return the expected value.
Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid
testing sizes which cause out-of-bounds reads.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixup from Al Viro:
"Fixup for epoll regression; there's a better solution longer term, but
this is the least intrusive fix"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix regression in "epoll: Keep a reference on files added to the check list"
|
|
If the zero duty cycle doesn't correspond to any voltage in the voltage
table, the PWM regulator returns an -EINVAL from get_voltage_sel() which
results in the core erroring out with a "failed to get the current
voltage" and ending up not applying the machine constraints.
Instead, return -ENOTRECOVERABLE which makes the core set the voltage
since it's at an unknown value.
For example, with this device tree:
fooregulator {
compatible = "pwm-regulator";
pwms = <&foopwm 0 100000>;
regulator-min-microvolt = <2250000>;
regulator-max-microvolt = <2250000>;
regulator-name = "fooregulator";
regulator-always-on;
regulator-boot-on;
voltage-table = <2250000 30>;
};
Before this patch:
fooregulator: failed to get the current voltage(-22)
After this patch:
fooregulator: Setting 2250000-2250000uV
fooregulator: 2250 mV
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The following error ocurred when testing disk online/offline:
[ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[ 301.849206] Aborting journal on device dm-26-8.
[ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]
Reason is:
metadata_operation_failed
abort_transaction
dm_pool_abort_metadata
__create_persistent_data_objects
r = __open_or_format_metadata
if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
dm_block_manager_destroy(pmd->bm);
set_pool_mode
dm_pool_metadata_read_only(pool->pmd);
dm_bm_set_read_only(pmd->bm); --> use-after-free
Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions. If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Also fix timestamping typo in documentation.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154250.1440585-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On SKL+ Intel platforms, the driver selection is handled by the
snd_intel_dspcfg, and when the HDaudio legacy driver is not selected,
be it with the auto-selection or user preferences with a kernel
parameter, the probe aborts with no logs, only a -ENODEV return value.
Having no dmesg trace, even with dynamic debug enabled, makes support
more complicated than it needs to be, and even experienced users can
be fooled. A simple dev_dbg() trace solves this problem.
BugLink: https://github.com/thesofproject/linux/issues/2330
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154239.1440537-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.
This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add Rocketlake HDMI codec support. Rocketlake shares
the pin-to-port mapping table with Tigerlake.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154207.1440393-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Actually two things that need fixing up here:
- The io_rw_reissue() -EAGAIN retry is explicit to block devices and
regular files, so don't ever attempt to do that on other types of
files.
- If we hit -EAGAIN on a nonblock marked file, don't arm poll handler for
it. It should just complete with -EAGAIN.
Cc: stable@vger.kernel.org
Reported-by: Norman Maurer <norman.maurer@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
epoll_loop_check_proc() can run into a file already committed to destruction;
we can't grab a reference on those and don't need to add them to the set for
reverse path check anyway.
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: a9ed4a6560b8 ("epoll: Keep a reference on files added to the check list")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
While io_sqe_file_register() failed in __io_sqe_files_update(),
table->files[i] still point to the original file which may freed
soon, and that will trigger use-after-free problems.
Cc: stable@vger.kernel.org
Fixes: f3bd9dae3708 ("io_uring: fix memleak in __io_sqe_files_update()")
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull tasklet API conversions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-11-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-10-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-9-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-8-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200902040221.354941-7-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-6-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-5-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-4-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200902040221.354941-3-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200902040221.354941-2-allen.lkml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION")
changed a bunch of uses of CONFIG_PREEMPT to _PREEMPTION.
Except in the Kconfig it used two T's. That's the only place
in the system where that spelling exists, so let's fix that.
Fixes: fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION")
Cc: <stable@vger.kernel.org> # 5.6
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
On HDCP disable, clear the repeater bit. This ensures if we connect a
non-repeater sink after a repeater, the bit is in the state we expect.
Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-3-sean@poorly.run
(cherry picked from commit 2cc0c7b520bf8ea20ec42285d4e3d37b467eb7f9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch fixes a few bugs:
1- We weren't taking into account sha_leftovers when adding multiple
ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with
the beginning of ksv[j]
2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was
being placed on the wrong half of sha_text, overlapping the leftover
ksv value
3- In the sha_leftovers == 2 case, we need to manually terminate the
byte stream with 0x80 since the hardware doesn't have enough room to
add it after writing M0
The upside is that all of the HDCP supported HDMI repeaters I could
find on Amazon just strip HDCP anyways, so it turns out to be _really_
hard to hit any of these cases without an MST hub, which is not (yet)
supported. Oh, and the sha_leftovers == 1 case works perfectly!
Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run
(cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
icl_combo_phy_verify_state
Clang warns:
drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable
'ret' is uninitialized when used here [-Wuninitialized]
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy),
^~~
drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize
the variable 'ret' to silence this warning
bool ret;
^
= 0
1 warning generated.
In practice, the bug this warning appears to be concerned with would not
actually matter because ret gets initialized to the return value of
cnl_verify_procmon_ref_values. However, that does appear to be a bug
since it means the first hunk of the patch this fixes won't actually do
anything (since the values of check_phy_reg won't factor into the final
ret value). Initialize ret to true then make all of the assignments a
bitwise AND with itself so that the function always does what it should
do.
Fixes: 239bef676d8e ("drm/i915/display: Implement new combo phy initialization step")
Link: https://github.com/ClangBuiltLinux/linux/issues/1094
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 2034c2129bc4a91d471815d4dc7a2a69eaa5338d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In the arm64 module linker script, the section .text.ftrace_trampoline
is specified unconditionally regardless of whether CONFIG_DYNAMIC_FTRACE
is enabled (this is simply due to the limitation that module linker
scripts are not preprocessed like the vmlinux one).
Normally, for .plt and .text.ftrace_trampoline, the section flags
present in the module binary wouldn't matter since module_frob_arch_sections()
would assign them manually anyway. However, the arm64 module loader only
sets the section flags for .text.ftrace_trampoline when CONFIG_DYNAMIC_FTRACE=y.
That's only become problematic recently due to a recent change in
binutils-2.35, where the .text.ftrace_trampoline section (along with the
.plt section) is now marked writable and executable (WAX).
We no longer allow writable and executable sections to be loaded due to
commit 5c3a7db0c7ec ("module: Harden STRICT_MODULE_RWX"), so this is
causing all modules linked with binutils-2.35 to be rejected under arm64.
Drop the IS_ENABLED(CONFIG_DYNAMIC_FTRACE) check in module_frob_arch_sections()
so that the section flags for .text.ftrace_trampoline get properly set to
SHF_EXECINSTR|SHF_ALLOC, without SHF_WRITE.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: http://lore.kernel.org/r/20200831094651.GA16385@linux-8ccs
Link: https://lore.kernel.org/r/20200901160016.3646-1-jeyu@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit eaecca9e7710 ("arm64: Fix __cpu_logical_map undefined issue")
exported cpu_logical_map in order to fix tegra194-cpufreq module build
failure.
As this might potentially cause problem while supporting physical CPU
hotplug, tegra194-cpufreq module was reworded to avoid use of
cpu_logical_map() via the commit 93d0c1ab2328 ("cpufreq: replace
cpu_logical_map() with read_cpuid_mpir()")
Since cpu_logical_map was exported to fix the module build temporarily,
let us remove the same before it gains any user again.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200901095229.56793-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When going through a disable/enable cycle without changing the
framebuffer the optimization added by commit 3954ff10e06e ("drm/virtio:
skip set_scanout if framebuffer didn't change") causes the screen stay
blank. Add a bool to force an update to fix that.
v2: use drm_atomic_crtc_needs_modeset() (Daniel).
Cc: 1882851@bugs.launchpad.net
Fixes: 3954ff10e06e ("drm/virtio: skip set_scanout if framebuffer didn't change")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Diego Viola <diego.viola@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200818072511.6745-2-kraxel@redhat.com
(cherry picked from commit 1bc371cd0ec907bab870cacb6e898105f9c41dc8)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix infinite loop in the TUI for grouped events in 'perf top/record',
eg when using "perf top -e '{cycles,instructions,cache-misses}'".
- Fix segfault by skipping side-band event setup if HAVE_LIBBPF_SUPPORT
is not set.
- Fix synthesized branch stacks generated from CoreSight ETM trace and
Intel PT hardware traces.
- Fix error when synthesizing events from ARM SPE hardware trace.
- The SNOOPX and REMOTE offsets in the data_src bitmask in perf records
were were both 37, SNOOPX is 38, fix it.
- Fix use of CPU list with summary option in 'perf sched timehist'.
- Avoid an uninitialized read when using fake PMUs.
- Set perf_event_attr.exclude_guest=1 for user-space counting.
- Don't order events when doing a 'perf report -D' raw dump of
perf.data records.
- Set NULL sentinel in pmu_events table in "Parse and process metrics"
'perf test'
- Fix basic bpf filtering 'perf test' on s390x.
- Fix out of bounds array access in the 'perf stat' print_counters()
evlist method.
- Add mwait_idle_with_hints.constprop.0 to the list of idle symbols.
- Use %zd for size_t printf formats on 32-bit.
- Correct the help info of "perf record --no-bpf-event" option.
- Add entries for CoreSight and Arm SPE tooling to MAINTAINERS.
* tag 'perf-tools-fixes-for-v5.9-2020-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf report: Disable ordered_events for raw dump
perf tools: Correct SNOOPX field offset
perf intel-pt: Fix corrupt data after perf inject from
perf cs-etm: Fix corrupt data after perf inject from
perf top/report: Fix infinite loop in the TUI for grouped events
perf parse-events: Avoid an uninitialized read when using fake PMUs
perf stat: Fix out of bounds array access in the print_counters() evlist method
perf test: Set NULL sentinel in pmu_events table in "Parse and process metrics" test
perf parse-events: Set exclude_guest=1 for user-space counting
perf record: Correct the help info of option "--no-bpf-event"
perf tools: Use %zd for size_t printf formats on 32-bit
MAINTAINERS: Add entries for CoreSight and Arm SPE tooling
perf: arm-spe: Fix check error when synthesizing events
perf symbols: Add mwait_idle_with_hints.constprop.0 to the list of idle symbols
perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
perf sched timehist: Fix use of CPU list with summary option
perf test: Fix basic bpf filtering test
|
|
It was discovered that sdparm will fail when attempting to disable write
cache on a SATA disk connected via libsas.
In the ATA command set the write cache state is controlled through the SET
FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and
the latter command is what is used in the SCSI-ATA translation layer. A
subtle difference is that a MODE SELECT carries data whereas SET FEATURES
is defined as a non-data command in ATA.
Set the DMA data direction to DMA_NONE if the requested ATA command is
identified as non-data.
[mkp: commit desc]
Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas")
Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two small fixes and a bunch of lockdep fixes for warnings that show up
with an upcoming tree locking update but are valid with current locks
as well"
* tag 'for-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: fix the error message for transid error
btrfs: set the lockdep class for log tree extent buffers
btrfs: set the correct lockdep class for new nodes
btrfs: allocate scrub workqueues outside of locks
btrfs: fix potential deadlock in the search ioctl
btrfs: drop path before adding new uuid tree entry
btrfs: block-group: fix free-space bitmap threshold
|
|
Current code does not consider 'page_off' in data digest calculation. To
fix this, add a local variable 'first_sg' and set first_sg.offset to
sg->offset + page_off.
Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Christie <michael.christie@oralce.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
blk-iocost calls blk_stat_enable_accounting() while holding an irqsafe lock
which triggers a lockdep splat because q->stats->lock isn't irqsafe. Let's
make it irqsafe.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: cd006509b0a9 ("blk-iocost: account for IO size when testing latencies")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled
when it can be called with irq disabled or enabled. This has a small chance
of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface.
Signed-off-by: Kamil Lorenc <kamil@re-ws.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"enable" should be "disable" when the function name is
vhost_disable_notify(), which does the disabling work.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()
scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()
scsi: qedf: Fix null ptr reference in qedf_stag_change_work
|
|
The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.
Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().
Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.
Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.
Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').
It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().
Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
Cc: stable@vger.kernel.org
Reported-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a
max_order of 31 will be passed to mlx_buddy_init(), which results in
s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to
kvmalloc_array() failure when it is converted to size_t.
mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting
mlx4_core: probe of 0000:b1:00.0 failed with error -12
Fix this issue by changing the left shifting operand from a signed literal to
an unsigned one.
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
