summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-27btrfs: convert data_seqcount to seqcount_mutex_tDavidlohr Bueso
By doing so we can associate the sequence counter to the chunk_mutex for lockdep purposes (compiled-out otherwise), the mutex is otherwise used on the write side. Also avoid explicitly disabling preemption around the write region as it will now be done automatically by the seqcount machinery based on the lock type. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-27btrfs: don't fallback to buffered read if we don't need toJohannes Thumshirn
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs: switch to iomap for direct IO") we're calling generic_file_buffered_read() directly and not via generic_file_read_iter() anymore. If the read could read everything there is no need to bother calling generic_file_buffered_read(), like it is handled in generic_file_read_iter(). If we call generic_file_buffered_read() in this case we can hit a situation where we do an invalid readahead and cause this UBSAN splat in fstest generic/091: run fstests generic/091 at 2020-10-21 10:52:32 ================================================================================ UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 dump_stack+0x57/0x70 lib/dump_stack.c:118 ubsan_epilogue+0x5/0x40 lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395 __roundup_pow_of_two ./include/linux/log2.h:57 get_init_ra_size mm/readahead.c:318 ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530 generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199 call_read_iter ./include/linux/fs.h:1876 new_sync_read+0x102/0x180 fs/read_write.c:415 vfs_read+0x11c/0x1a0 fs/read_write.c:481 ksys_read+0x4f/0xc0 fs/read_write.c:615 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118 RIP: 0033:0x7fe87fee992e RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003 RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000 R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000 R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000 ================================================================================ BTRFS info (device nullb0): has skinny extents BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B BTRFS info (device nullb0): enabling ssd optimizations Fixes: f85781fb505e ("btrfs: switch to iomap for direct IO") Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-27tracing, synthetic events: Replace buggy strcat() with seq_buf operationsSteven Rostedt (VMware)
There was a memory corruption bug happening while running the synthetic event selftests: kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing) CPU: 5 PID: 6866 Comm: ftracetest Tainted: G W 5.9.0-rc5-test+ #577 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x8d/0xc0 create_object.cold+0x3b/0x60 slab_post_alloc_hook+0x57/0x510 ? tracing_map_init+0x178/0x340 __kmalloc+0x1b1/0x390 tracing_map_init+0x178/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fef0a63a487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487 RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001 RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038 R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039 R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700 kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff8c196fa2afe0 (size 8): kmemleak: comm "ftracetest", pid 6866, jiffies 4295082531 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: __kmalloc+0x1b1/0x390 tracing_map_init+0x1be/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The cause came down to a use of strcat() that was adding an string that was shorten, but the strcat() did not take that into account. strcat() is extremely dangerous as it does not care how big the buffer is. Replace it with seq_buf operations that prevent the buffer from being overwritten if what is being written is bigger than the buffer. Fixes: 10819e25799a ("tracing: Handle synthetic event array field type checking correctly") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-27staging: fieldbus: anybuss: jump to correct label in an error pathJing Xiangfeng
In current code, controller_probe() misses to call ida_simple_remove() in an error path. Jump to correct label to fix it. Fixes: 17614978ed34 ("staging: fieldbus: anybus-s: support the Arcx anybus controller") Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201012132404.113031-1-jingxiangfeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: wfx: fix test on return value of gpiod_get_value()Jérôme Pouiller
The commit 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") has changed the way the driver test the value returned by gpiod_get_value(). The new code was wrong. Fixes: 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201019160604.1609180-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: wfx: fix use of uninitialized pointerJérôme Pouiller
With -Wuninitialized, the compiler complains: drivers/staging/wfx/data_tx.c:34:19: warning: variable 'band' is uninitialized when used here [-Wuninitialized] if (rate->idx >= band->n_bitrates) { ^~~~ Reported-by: kernel test robot <lkp@intel.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Fixes: 868fd970e187 ("staging: wfx: improve robustness of wfx_get_hw_rate()") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201019160604.1609180-1-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: mmal-vchiq: Fix memory leak for vchiq_instanceSeung-Woo Kim
The vchiq_instance is allocated with vchiq_initialise() but never freed properly. Fix memory leak for the vchiq_instance. Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Link: https://lore.kernel.org/r/1603706150-10806-1-git-send-email-sw0312.kim@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdeviceIan Abbott
The "cb_pcidas" driver supports asynchronous commands on the analog output (AO) subdevice for those boards that have an AO FIFO. The code (in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to validate and set up the command supports output to a single channel or to two channels simultaneously (the boards have two AO channels). However, the code in `cb_pcidas_auto_attach()` that initializes the subdevices neglects to initialize the AO subdevice's `len_chanlist` member, leaving it set to 0, but the Comedi core will "correct" it to 1 if the driver neglected to set it. This limits commands to use a single channel (either channel 0 or 1), but the limit should be two channels. Set the AO subdevice's `len_chanlist` member to be the same value as the `n_chan` member, which will be 2. Cc: <stable@vger.kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: octeon: Drop on uncorrectable alignment or FCS errorAlexander Sverdlin
Currently in case of alignment or FCS error if the packet cannot be corrected it's still not dropped. Report the error properly and drop the packet while making the code around a little bit more readable. Fixes: 80ff0fd3ab64 ("Staging: Add octeon-ethernet driver files.") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27staging: octeon: repair "fixed-link" supportAlexander Sverdlin
The PHYs must be registered once in device probe function, not in device open callback because it's only possible to register them once. Fixes: a25e278020bf ("staging: octeon: support fixed-link phys") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27drm: drm_print.h: fix kernel-doc markupsMauro Carvalho Chehab
A kernel-doc markup should start with the identifier on its first line. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/5b76c5625709aaaa3abee98faa620b9f3d27ff85.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm: kernel-doc: drm_dp_helper.h: fix a typoMauro Carvalho Chehab
Right now, kernel-doc generates a warning: ./include/drm/drm_dp_helper.h:1786: warning: Function parameter or member 'hbr2_reset' not described in 'drm_dp_phy_test_params' This is due to a typo: @hb2_reset -> @hbr2_reset Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/2a615cb38e951215bb1bddc2481ad323c9cf3fc9.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm: kernel-doc: add description for a new function parameterMauro Carvalho Chehab
As reported by "make htmldocs": ./drivers/gpu/drm/drm_prime.c:808: warning: Function parameter or member 'dev' not described in 'drm_prime_pages_to_sg' Add a description for the new parameter. Fixes: 707d561f77b5 ("drm: allow limiting the scatter list size.") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/9366f48e6e9c3ec2f31a3e68452a2b23a1089fce.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm: drm_edid: remove a duplicated kernel-doc declarationMauro Carvalho Chehab
It is not possible to create cross-references for duplicated symbols. While Sphinx always detected it, on Sphinx 3 it generates warnings like this: .../Documentation/gpu/drm-kms-helpers:326: ../drivers/gpu/drm/drm_edid.c:1626: WARNING: Duplicate C declaration, also defined in 'gpu/drm-kms-helpers'. Declaration is 'bool drm_edid_are_equal (const struct edid *edid1, const struct edid *edid2)'. So, get rid of the duplicated kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/9310f4074fa9d29cd3ad60684d86d0ace8dab7ae.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm/dp: fix a kernel-doc issue at drm_edid.cMauro Carvalho Chehab
The name of the argument is different, causing those warnings: ./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic' ./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic' Fixes: 7af655bce275 ("drm/dp: Add drm_dp_downstream_mode()") Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/7f4d6c3ff6df63ebd006eb90a5108006c23e2168.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm/dp: fix kernel-doc warnings at drm_dp_helper.cMauro Carvalho Chehab
As warned by kernel-doc: ./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type' ./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode' Some function parameters weren't documented. Fixes: 38784f6f8805 ("drm/dp: Add helpers to identify downstream facing port types") Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/03c9c8ba3f492aca76e2b4836803219cd9c971cf.1603791716.git.mchehab+huawei@kernel.org
2020-10-27drm: kernel-doc: document drm_dp_set_subconnector_property() paramsMauro Carvalho Chehab
Changeset e5b92773287c ("drm: report dp downstream port type as a subconnector property") added a new function to the kAPI, but didn't add any documentation for the parameters for drm_dp_set_subconnector_property(). Fixes: e5b92773287c ("drm: report dp downstream port type as a subconnector property") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/0870be85a77bea4ba5cf1715010834289a4e10b1.1603791716.git.mchehab+huawei@kernel.org
2020-10-27Merge tag 'imx-fixes-5.10-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 2nd round: A couple of more defconfig fixes to enable CONFIG_GPIO_MXC option for i.MX ARMv4/v5 devices. * tag 'imx-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC Link: https://lore.kernel.org/r/20201026235230.GL9880@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-27Merge tag 'amlogic-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.10-rc1 - misc DT only fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: amlogic: add missing ethernet reset ID arm64: dts: amlogic: meson-g12: use the G12A specific dwmac compatible arm64: dts: meson: add missing g12 rng clock arm64: dts: meson-axg-s400: enable USB OTG arm64: dts: meson-axg: add USB nodes Link: https://lore.kernel.org/r/7hlffshfu3.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-27usb: raw-gadget: fix memory leak in gadget_setupZqiang
When fetch 'event' from event queue, after copy its address space content to user space, the 'event' the memory space pointed to by the 'event' pointer need be freed. BUG: memory leak unreferenced object 0xffff888110622660 (size 32): comm "softirq", pid 0, jiffies 4294941981 (age 12.480s) hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 80 06 00 01 00 00 40 00 ..............@. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000efd29abd>] kmalloc include/linux/slab.h:554 [inline] [<00000000efd29abd>] raw_event_queue_add drivers/usb/gadget/legacy/raw_gadget.c:66 [inline] [<00000000efd29abd>] raw_queue_event drivers/usb/gadget/legacy/raw_gadget.c:225 [inline] [<00000000efd29abd>] gadget_setup+0xf6/0x220 drivers/usb/gadget/legacy/raw_gadget.c:343 [<00000000952c4a46>] dummy_timer+0xb9f/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1899 [<0000000074ac2c54>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1415 [<00000000560a3a79>] expire_timers kernel/time/timer.c:1460 [inline] [<00000000560a3a79>] __run_timers.part.0+0x319/0x400 kernel/time/timer.c:1757 [<000000009d9503d0>] __run_timers kernel/time/timer.c:1738 [inline] [<000000009d9503d0>] run_timer_softirq+0x3d/0x80 kernel/time/timer.c:1770 [<000000009df27c89>] __do_softirq+0xcc/0x2c2 kernel/softirq.c:298 [<000000007a3f1a47>] asm_call_irq_on_stack+0xf/0x20 [<000000004a62cc2e>] __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] [<000000004a62cc2e>] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] [<000000004a62cc2e>] do_softirq_own_stack+0x32/0x40 arch/x86/kernel/irq_64.c:77 [<00000000b0086800>] invoke_softirq kernel/softirq.c:393 [inline] [<00000000b0086800>] __irq_exit_rcu kernel/softirq.c:423 [inline] [<00000000b0086800>] irq_exit_rcu+0x91/0xc0 kernel/softirq.c:435 [<00000000175f9523>] sysvec_apic_timer_interrupt+0x36/0x80 arch/x86/kernel/apic/apic.c:1091 [<00000000a348e847>] asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:631 [<0000000060661100>] native_safe_halt arch/x86/include/asm/irqflags.h:60 [inline] [<0000000060661100>] arch_safe_halt arch/x86/include/asm/irqflags.h:103 [inline] [<0000000060661100>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [<0000000060661100>] acpi_idle_do_entry+0xc3/0xd0 drivers/acpi/processor_idle.c:517 [<000000003f413b99>] acpi_idle_enter+0x128/0x1f0 drivers/acpi/processor_idle.c:648 [<00000000f5e5afb8>] cpuidle_enter_state+0xc9/0x650 drivers/cpuidle/cpuidle.c:237 [<00000000d50d51fc>] cpuidle_enter+0x29/0x40 drivers/cpuidle/cpuidle.c:351 [<00000000d674baed>] call_cpuidle kernel/sched/idle.c:132 [inline] [<00000000d674baed>] cpuidle_idle_call kernel/sched/idle.c:213 [inline] [<00000000d674baed>] do_idle+0x1c8/0x250 kernel/sched/idle.c:273 Reported-by: syzbot+bd38200f53df6259e6bf@syzkaller.appspotmail.com Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: dwc2: Avoid leaving the error_debugfs label unusedMartin Blumenstingl
The error_debugfs label is only used when either CONFIG_USB_DWC2_PERIPHERAL or CONFIG_USB_DWC2_DUAL_ROLE is enabled. Add the same #if to the error_debugfs label itself as the code which uses this label already has. This avoids the following compiler warning: warning: label ‘error_debugfs’ defined but not used [-Wunused-label] Fixes: e1c08cf23172ed ("usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: dwc3: ep0: Fix delay status handlingThinh Nguyen
If we want to send a control status on our own time (through delayed_status), make sure to handle a case where we may queue the delayed status before the host requesting for it (when XferNotReady is generated). Otherwise, the driver won't send anything because it's not EP0_STATUS_PHASE yet. To resolve this, regardless whether dwc->ep0state is EP0_STATUS_PHASE, make sure to clear the dwc->delayed_status flag if dwc3_ep0_send_delayed_status() is called. The control status can be sent when the host requests it later. Cc: <stable@vger.kernel.org> Fixes: d97c78a1908e ("usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27drm/imx: tve remove extraneous type qualifierArnd Bergmann
clang warns about functions returning a 'const int' result: drivers/gpu/drm/imx/imx-tve.c:487:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] Remove the extraneous 'const' qualifier here. I would guess that the function was intended to be marked __attribute__((const)) instead, but that would also be wrong since it call other functions without that attribute. Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: reduce scope of edid_lenPhilipp Zabel
The edid_len variable is never used again. Use a local variable instead of storing it in the device structure. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: remove unused function enc_to_imxpd()Philipp Zabel
Remove leftover container_of helper, it has been replaced by bridge_to_imxpd(). Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: parallel-display: fix edid memory leakMarco Felsch
The edid memory is only freed if the component.unbind() is called. This is okay if the parallel-display was bound but if the bind() fails we leak the memory. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [p.zabel@pengutronix.de: rebased, dropped now empty unbind()] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27drm/imx: imx-ldb: reduce scope of edid_lenPhilipp Zabel
The edid_len variable is never used again. Use a local variable instead of storing it in the device structure. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-27nvmet: fix a NULL pointer dereference when tracing the flush commandChaitanya Kulkarni
When target side trace in turned on and flush command is issued from the host it results in the following Oops. [ 856.789724] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 856.790686] #PF: supervisor read access in kernel mode [ 856.791262] #PF: error_code(0x0000) - not-present page [ 856.791863] PGD 6d7110067 P4D 6d7110067 PUD 66f0ad067 PMD 0 [ 856.792527] Oops: 0000 [#1] SMP NOPTI [ 856.792950] CPU: 15 PID: 7034 Comm: nvme Tainted: G OE 5.9.0nvme-5.9+ #71 [ 856.793790] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214 [ 856.794956] RIP: 0010:trace_event_raw_event_nvmet_req_init+0x13e/0x170 [nvmet] [ 856.795734] Code: 41 5c 41 5d c3 31 d2 31 f6 e8 4e 9b b8 e0 e9 0e ff ff ff 49 8b 55 00 48 8b 38 8b 0 [ 856.797740] RSP: 0018:ffffc90001be3a60 EFLAGS: 00010246 [ 856.798375] RAX: 0000000000000000 RBX: ffff8887e7d2c01c RCX: 0000000000000000 [ 856.799234] RDX: 0000000000000020 RSI: 0000000057e70ea2 RDI: ffff8887e7d2c034 [ 856.800088] RBP: ffff88869f710578 R08: ffff888807500d40 R09: 00000000fffffffe [ 856.800951] R10: 0000000064c66670 R11: 00000000ef955201 R12: ffff8887e7d2c034 [ 856.801807] R13: ffff88869f7105c8 R14: 0000000000000040 R15: ffff88869f710440 [ 856.802667] FS: 00007f6a22bd8780(0000) GS:ffff888813a00000(0000) knlGS:0000000000000000 [ 856.803635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 856.804367] CR2: 0000000000000068 CR3: 00000006d73e0000 CR4: 00000000003506e0 [ 856.805283] Call Trace: [ 856.805613] nvmet_req_init+0x27c/0x480 [nvmet] [ 856.806200] nvme_loop_queue_rq+0xcb/0x1d0 [nvme_loop] [ 856.806862] blk_mq_dispatch_rq_list+0x123/0x7b0 [ 856.807459] ? kvm_sched_clock_read+0x14/0x30 [ 856.808025] __blk_mq_sched_dispatch_requests+0xc7/0x170 [ 856.808708] blk_mq_sched_dispatch_requests+0x30/0x60 [ 856.809372] __blk_mq_run_hw_queue+0x70/0x100 [ 856.809935] __blk_mq_delay_run_hw_queue+0x156/0x170 [ 856.810574] blk_mq_run_hw_queue+0x86/0xe0 [ 856.811104] blk_mq_sched_insert_request+0xef/0x160 [ 856.811733] blk_execute_rq+0x69/0xc0 [ 856.812212] ? blk_mq_rq_ctx_init+0xd0/0x230 [ 856.812784] nvme_execute_passthru_rq+0x57/0x130 [nvme_core] [ 856.813461] nvme_submit_user_cmd+0xeb/0x300 [nvme_core] [ 856.814099] nvme_user_cmd.isra.82+0x11e/0x1a0 [nvme_core] [ 856.814752] blkdev_ioctl+0x1dc/0x2c0 [ 856.815197] block_ioctl+0x3f/0x50 [ 856.815606] __x64_sys_ioctl+0x84/0xc0 [ 856.816074] do_syscall_64+0x33/0x40 [ 856.816533] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 856.817168] RIP: 0033:0x7f6a222ed107 [ 856.817617] Code: 44 00 00 48 8b 05 81 cd 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 8 [ 856.819901] RSP: 002b:00007ffca848f058 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 856.820846] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f6a222ed107 [ 856.821726] RDX: 00007ffca848f060 RSI: 00000000c0484e43 RDI: 0000000000000003 [ 856.822603] RBP: 0000000000000003 R08: 000000000000003f R09: 0000000000000005 [ 856.823478] R10: 00007ffca848ece0 R11: 0000000000000202 R12: 00007ffca84912d3 [ 856.824359] R13: 00007ffca848f4d0 R14: 0000000000000002 R15: 000000000067e900 [ 856.825236] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corel Move the nvmet_req_init() tracepoint after we parse the command in nvmet_req_init() so that we can get rid of the duplicate nvmet_find_namespace() call. Rename __assign_disk_name() -> __assign_req_name(). Now that we call tracepoint after parsing the command simplify the newly added __assign_req_name() which fixes this bug. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme-fc: remove nvme_fc_terminate_io()James Smart
__nvme_fc_terminate_io() is now called by only 1 place, in reset_work. Consoldate and move the functionality of terminate_io into reset_work. In reset_work, rather than calling the create_association directly, schedule the connect work element to do its thing. After scheduling, flush the connect work element to continue with semantic of not returning until connect has been attempted at least once. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme-fc: eliminate terminate_io use by nvme_fc_error_recoveryJames Smart
nvme_fc_error_recovery() special cases handling when in CONNECTING state and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself special cases CONNECTING state and calls the routine to abort outstanding ios. Simplify the sequence by putting the call to abort outstanding I/Os directly in nvme_fc_error_recovery. Move the location of __nvme_fc_abort_outstanding_ios(), and nvme_fc_terminate_exchange() which is called by it, to avoid adding function prototypes for nvme_fc_error_recovery(). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme-fc: remove err_work work itemJames Smart
err_work was created to handle errors (mainly I/O timeouts) while in CONNECTING state. The flag for err_work_active is also unneeded. Remove err_work_active and err_work. The actions to abort I/Os are moved inline to nvme_error_recovery(). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme-fc: track error_recovery while connectingJames Smart
Whenever there are errors during CONNECTING, the driver recovers by aborting all outstanding ios and counts on the io completion to fail them and thus the connection/association they are on. However, the connection failure depends on a failure state from the core routines. Not all commands that are issued by the core routine are guaranteed to cause a failure of the core routine. They may be treated as a failure status and the status is then ignored. As such, whenever the transport enters error_recovery while CONNECTING, it will set a new flag indicating an association failed. The create_association routine which creates and initializes the controller, will monitor the state of the flag as well as the core routine error status and ensure the association fails if there was an error. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme-rdma: handle unexpected nvme completion data lengthzhenwei pi
Receiving a zero length message leads to the following warnings because the CQE is processed twice: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 RIP: 0010:refcount_warn_saturate+0xd9/0xe0 Call Trace: <IRQ> nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma] __ib_process_cq+0x76/0x150 [ib_core] ... Sanity check the received data length, to avoids this. Thanks to Chao Leng & Sagi for suggestions. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27nvme: ignore zone validate errors on subsequent scansKeith Busch
Revalidating nvme zoned namespaces requires IO commands, and there are controller states that prevent IO. For example, a sanitize in progress is required to fail all IO, but we don't want to remove a namespace we've previously added just because the controller is in such a state. Suppress the error in this case. Reported-by: Michael Nguyen <michael.nguyen@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-27usb: gadget: fsl: fix null pointer checkingRan Wang
fsl_ep_fifo_status() should return error if _ep->desc is null. Fixes: 75eaa498c99e (“usb: gadget: Correct NULL pointer checking in fsl gadget”) Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: gadget: goku_udc: fix potential crashes in probeEvgeny Novikov
goku_probe() goes to error label "err" and invokes goku_remove() in case of failures of pci_enable_device(), pci_resource_start() and ioremap(). goku_remove() gets a device from pci_get_drvdata(pdev) and works with it without any checks, in particular it dereferences a corresponding pointer. But goku_probe() did not set this device yet. So, one can expect various crashes. The patch moves setting the device just after allocation of memory for it. Found by Linux Driver Verification project (linuxtesting.org). Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27opp: Reduce the size of critical section in _opp_table_kref_release()Viresh Kumar
There is a lot of stuff here which can be done outside of the big opp_table_lock, do that. This helps avoiding few circular dependency lockdeps around debugfs and interconnects. Reported-by: Rob Clark <robdclark@gmail.com> Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-10-27ALSA: usb-audio: Add implicit feedback quirk for Zoom UAC-2Keith Winstein
The Zoom UAC-2 USB audio interface provides an async playback endpoint ("1 OUT (ASYNC)") and capture endpoint ("2 IN (ASYNC)"), both with 2-channel S32_LE in 44.1, 48, 88.2, 96, 176.4, or 192 kilosamples/s. The device provides explicit feedback to adjust the host's playback rate, but the feedback appears unstable and biased relative to the device's capture rate. "alsaloop -t 1000" experiences playback underruns and tries to resample the captured audio to match the varying playback rate. Forcing the kernel to use implicit feedback appears to produce more stable results. This causes the host to transmit one playback sample for each capture sample received. (Zoom North America has been notified of this change.) Signed-off-by: Keith Winstein <keithw@cs.stanford.edu> Tested-by: Keith Winstein <keithw@cs.stanford.edu> Cc: <stable@vger.kernel.org> BugLink: https://lore.kernel.org/r/20201027071841.GA164525@trolley.csail.mit.edu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-10-27usb: dwc3: pci: add support for the Intel Alder Lake-SHeikki Krogerus
This patch adds the necessary PCI ID for Intel Alder Lake-S devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27opp: Fix early exit from dev_pm_opp_register_set_opp_helper()Viresh Kumar
We returned earlier by mistake even when there were no failures. Fix it. Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.com>
2020-10-27opp: Don't always remove static OPPs in _of_add_opp_table_v1()Viresh Kumar
The patch missed returning 0 early in case of success and hence the static OPPs got removed by mistake. Fix it. Fixes: 90d46d71cce2 ("opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()") Reported-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Dong Aisheng <aisheng.dong@nxp.com>
2020-10-26net: hns3: Clear the CMDQ registers before unmapping BAR regionZenghui Yu
When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Bug fixes. These 5 bug fixes are all related to the firmware reset or AER recovery. 2 patches fix the cleanup logic for the workqueue used to handle firmware reset and recovery. 1 patch ensures that the chip will have the proper BAR addresses latched after fatal AER recovery. 1 patch fixes the open path to check for firmware reset abort error. The last one sends the fw reset command unconditionally to fix the AER reset logic. ==================== Link: https://lore.kernel.org/r/1603685901-17917-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.Vasundhara Volam
In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Check abort error state in bnxt_open_nic().Michael Chan
bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam
When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam
As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam
A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26Merge branch 'mlxsw-various-fixes'Jakub Kicinski
Ido Schimmel says: ==================== mlxsw: Various fixes This patch set contains various fixes for mlxsw. Patch #1 ensures that only link modes that are supported by both the device and the driver are advertised. When a link mode that is not supported by the driver is negotiated by the device, it will be presented as an unknown speed by ethtool, causing the bond driver to wrongly assume that the link is down. Patch #2 fixes a trivial memory leak upon module removal. Patch #3 fixes a use-after-free that syzkaller was able to trigger once on a slow emulator after a few months of fuzzing. ==================== Link: https://lore.kernel.org/r/20201024133733.2107509-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 18:15:34 +0000