summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-23drm/i915/selftest: Bump up sample period for busy stats selftestUmesh Nerlige Ramappa
Engine busyness samples around a 10ms period is failing with busyness ranging approx. from 87% to 115% as shown below. The expected range is +/- 5% of the sample period. Fail 10% of the time. rcs0: reported 11716042ns [91%] busyness while spinning [for 12805719ns] When determining busyness of active engine, the GuC based engine busyness implementation relies on a 64 bit timestamp register read. The latency incurred by this register read causes the failure. On DG1, when the test fails, the observed latencies range from 900us - 1.5ms. Optimizing the 2x32 read by acquiring the lock and forcewake prior to all reg reads reduces the rate of failure to around 2%, but does not eliminate it. In order to make the selftest more robust and always account for such latencies, increase the sample period to 100 ms. This eliminates the issue as seen in a 1000 runs. v2: (Ashutosh) - Add error to commit msg - Include gitlab bug - Update commit for inclusion of 2x32 optimized read Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4418 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-3-umesh.nerlige.ramappa@intel.com (cherry picked from commit 529d95a6067b74da9d4d5d9ab3009b35c98c5fce) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23i915/uncore: Acquire fw before loop in intel_uncore_read64_2x32Umesh Nerlige Ramappa
PMU reads the GT timestamp as a 2x32 mmio read and since upper and lower 32 bit registers are read in a loop, there is a latency involved between getting the GT timestamp and the CPU timestamp. As part of the resolution, refactor intel_uncore_read64_2x32 to acquire forcewake and uncore lock prior to reading upper and lower regs. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit e746f84b8e813816951b63485134927ed6763a1b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23drm/i915/guc: make default_lists const dataJani Nikula
The default_lists array should be in rodata. Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.") Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221122141616.3469214-1-jani.nikula@intel.com (cherry picked from commit 8b7f7a9b10b704ba7d73199ff0f01354e0bad7a5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23drm/i915: Remove non-existent pipes from bigjoiner pipe maskVille Syrjälä
bigjoiner_pipes() doesn't consider that: - RKL only has three pipes - some pipes may be fused off This means that intel_atomic_check_bigjoiner() won't reject all configurations that would need a non-existent pipe. Instead we just keep on rolling witout actually having reserved the slave pipe we need. It's possible that we don't outright explode anywhere due to this since eg. for_each_intel_crtc_in_pipe_mask() will only walk the crtcs we've registered even though the passed in pipe_mask asks for more of them. But clearly the thing won't do what is expected of it when the required pipes are not present. Fix the problem by consulting the device info pipe_mask already in bigjoiner_pipes(). Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (cherry picked from commit f1c87a94a1087a26f41007ee83264033007421b5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23drm/i915: Fix workarounds on Gen2-3Tvrtko Ursulin
In 3653727560d0 ("drm/i915: Simplify internal helper function signature") I broke the old platforms by not noticing engine workaround init does not initialize the list on old platforms. Fix it by always initializing which already does the right thing by mostly not doing anything if there aren't any workarounds on the list. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 3653727560d0 ("drm/i915: Simplify internal helper function signature") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118115249.2683946-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 71feb6f901ecba962177a0a029dc545c91a4b396) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23drm/i915/gt: Manage uncore->lock while waiting on MCR registerMatt Roper
The GT MCR code currently relies on uncore->lock to avoid race conditions on the steering control register during MCR operations. The *_fw() versions of MCR operations expect the caller to already hold uncore->lock, while the non-fw variants manage the lock internally. However the sole callsite of intel_gt_mcr_wait_for_reg_fw() does not currently obtain the forcewake lock, allowing a potential race condition (and triggering an assertion on lockdep builds). Furthermore, since 'wait for register value' requests may not return immediately, it is undesirable to hold a fundamental lock like uncore->lock for the entire wait and block all other MMIO for the duration; rather the lock is only needed around the MCR read operations and can be released during the delays. Convert intel_gt_mcr_wait_for_reg_fw() to a non-fw variant that will manage uncore->lock internally. This does have the side effect of causing an unnecessary lookup in the forcewake table on each read operation, but since the caller is still holding the relevant forcewake domain, this will ultimately just incremenent the reference count and won't actually cause any additional MMIO traffic. In the future we plan to switch to a dedicated MCR lock to protect the steering critical section rather than using the overloaded and high-traffic uncore->lock; on MTL and beyond the new lock can be implemented on top of the hardware-provided synchonization mechanism for steering. Fixes: 3068bec83eea ("drm/i915/gt: Add intel_gt_mcr_wait_for_reg_fw()") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117173358.1980230-1-matthew.d.roper@intel.com (cherry picked from commit 192bb40f030a41ca95c5cff8c9340b725bc7ba8b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-23drm/mediatek: Add MT8195 ovl driver supportJustin Green
MT8195 ovl driver is similar to MT8183 ovl driver but support AFBC buffer format. Signed-off-by: Justin Green <greenjustin@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221116193335.36320-1-greenjustin@google.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-11-23drm/mediatek: Add AFBC support to Mediatek DRM driverJustin Green
Tested on MT8195 and confirmed both correct video output and improved DRAM bandwidth performance. Signed-off-by: Justin Green <greenjustin@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221116193335.36320-1-greenjustin@google.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-11-23drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly ↵Alex Deucher
when the edid is read" This partially reverts 20543be93ca45968f344261c1a997177e51bd7e1. Calling drm_connector_update_edid_property() in amdgpu_connector_free_edid() causes a noticeable pause in the system every 10 seconds on polled outputs so revert this part of the change. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2257 Cc: Claudio Suarez <cssk@net-c.es> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: add missing license to some filesAlex Deucher
The driver is MIT, so add the licenses. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2265 Acked-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: enable RAS poison for VCN 2.6Tao Zhou
Configure related settings to enable it. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdkfd: Release the topology_lock in error caseFelix Kuehling
Move the topology-locked part of kfd_topology_add_device into a separate function to simlpify error handling and release the topology lock consistently. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felix Kuehling <felix.kuehling@gmail.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: add register definition for VCN RAS initializationTao Zhou
Prepare for enableing VCN RAS poison. v2: move SHIFT and MASK definitions to related sh_mask.h file. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix for suspend/resume kiq fence fallback under sriovShikang Fan
- in device_resume, sriov configure interrupt should be in full access, so release_full_gpu should be done after kfd_resume. - remove the previous workaround solution for sriov. Fixes: ec4927d463cb ("drm/amdgpu: fix for suspend/resume sequence under sriov") Signed-off-by: Shikang Fan <shikang.fan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: trigger timing sync only if TG is runningAurabindo Pillai
[Why&How] If the timing generator isnt running, it does not make sense to trigger a sync on the corresponding OTG. Check this condition before starting. Otherwise, this will cause error like: *ERROR* GSL: Timeout on reset trigger! Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: Replace remaining 1-element array with flex-arrayPaulo Miguel Almeida
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct GOP_VBIOS_CONTENT and refactor the rest of the code accordingly. Important to mention is that doing a build before/after this patch results in no functional binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23Revert "drm/amd/display: fix dpms_off issue when disabling bios mode"Alex Deucher
This reverts commit 5aa663752ff6f844c6bfc97d89231e98884ae769. This causes a blank screen on boot on an Asus G513QY / 6800M laptop. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2259 Cc: Aric Cyr <Aric.Cyr@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix unused-function errorRen Zhijie
If CONFIG_DRM_AMDGPU=y and CONFIG_DRM_AMD_DC is not set, gcc complained about unused-function : drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1705:13: error: ‘amdgpu_discovery_set_sriov_display’ defined but not used [-Werror=unused-function] static void amdgpu_discovery_set_sriov_display(struct amdgpu_device *adev) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors To fix this error, use CONFIG_DRM_AMD_DC to wrap the definition of amdgpu_discovery_set_sriov_display(). Fixes: 25263da37693 ("drm/amdgpu: rework SR-IOV virtual display handling") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: Fix minmax warningLuben Tuikov
Fix minmax warning by using min_t() macro and explicitly specifying the assignment type. Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix use-after-free during gpu recoveryStanley.Yang
[Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/mediatek: Add mt8188 dpi compatibles and platform dataxinlei lee
For MT8188, the vdosys0 only supports 1T1P mode, so we need to add the compatible for mt8188 edp-intf. Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1666266353-16670-3-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-11-23dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT8188xinlei lee
For MT8188, the vdosys0 only supports 1T1P mode while the vdosys0 supports 2T1P mode in MT8195. So we need to add dt-binding documentation of dpi for MediaTek MT8188 SoC. Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1666266353-16670-2-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-11-23drm/amdgpu: update documentation of parameter amdgpu_gtt_sizeZhenGuo Yin
Fixes: f7ba887f606b ("drm/amdgpu: Adjust logic around GTT size (v3)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/vcn: re-use original vcn0 doorbell valueJane Jian
root cause that S2A need to use deduct offset flag. after setting this flag, vcn0 doorbell value works. so return it as before Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: add the fan abnormal detection featurelyndonli
Update the SW CTF limit from existing register when there's a fan failure detected via SMU interrupt. Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: update driver if header for smu_13_0_7lyndonli
update driver if header for smu_13_0_7 Signed-off-by: lyndonli <Lyndon.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/pm: Enable bad memory page/channel recording support for smu v13_0_0Candice Li
Send message to SMU to update bad memory page and bad channel info. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: 3.2.213Aric Cyr
This version brings along following fixes: -Add configuration 2 for ABM 2.3/2.4. -Add margin for HUBP for SubVp + DRR. -Fix no display after resume from WB/CB. -Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K. -Lower watermarks for enter/enter+exit latency. -Update support types for DCN314 to include z8 only and z8_z10 only state. -Add new value for soc bounding box and dummy pstate. -Override fclk chang latency when calculating prefetch schedule for subvp with low uclk. -Add check for DET fetch latency for dcn32. -Add check if PSR enabled when entering MALL. -Use base MALL allocation size calculations off vewport height. -Add YCBCR2020 to CSC matrix. -Implement DP-Tx portion to interact with DPIA. -Add debug option for increasing phantom lines. -Fix phantom plane/stream retain after fail validation. -Fix display corruption with VSR enable. -Set valid divider value for virtual and FRL/DP2. -Add new num clk levels struct for max mclk index. -Fix check for phantom BPP. -Fix rotated cursor offset calculation. Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix rotated cursor offset calculationDavid Galiffi
[Why] Underflow is observed when cursor is still enabled when the cursor rectangle is outside the bounds of it's surface viewport. [How] Update parameters used to determine when cursor should be disabled. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Revert check for phantom BPPAlvin Lee
[Description] Revert change since enabling SubVP on 8K60 single cable results in corruption Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use new num clk levels struct for max mclk indexDillon Varone
[WHY?] When calculating watermark and dlg values, the max mclk level index and associated speed are needed to find the correlated dummy latency value. Currently the incorrect index is given due to a clock manager refactor. [HOW?] Use num_memclk_level from num_entries_per_clk struct for getting the correct max mem speed. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Avoid setting pixel rate divider to N/ATaimur Hassan
[Why] Pixel rate divider values should never be set to N/A (0xF) as the K1/K2 field is only 1/2 bits wide. [How] Set valid divider values for virtual and FRL/DP2 cases. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Fix display corruption w/ VSR enableIlya Bakoulin
[Why] Brief corruption is observed on hotplug/unplug with certain display configurations when VSR is enabled. [How] Work around the issue by avoiding 2to1 ODM when stream plane_count is 0. Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Retain phantom plane/stream if validation failsAlvin Lee
[Description] - If we fail validation, we should retain the phantom stream/planes - Full updates assume that phantom pipes will be fully removed, but if validation fails we keep the phantom pipes - Therefore we have to retain the plane/stream if validation fails (since the refcount is decremented before validation, and the expectation is that it's fully freed when the old dc_state is released) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add debug options for increasing phantom linesAlvin Lee
[Description] - Add debug option for increasing number of phantom lines Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Phase 1 Add Bw Allocation source and header filesMustapha Ghaddar
[WHY] To implement BW Allocation as per USB4 spec chapter 10.7 [HOW] Implement the DP-Tx portion of the logic to interact with DPIA Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add YCBCR2020 coefficients to CSC matrixRodrigo Siqueira
When some of the IGT tests are executed in DCN31, it is possible to see multiple occurrences of this warning: WARNING: CPU: 9 PID: 3482 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dcn30/dcn30_dpp.c:154 dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] PU: 9 PID: 3482 Comm: amd_hdr Tainted: G W 5.18.0+ #3 IP: 0010:dpp3_program_post_csc+0x196/0x220 [amdgpu] [..] all Trace: <TASK> dpp3_cnv_setup+0x5d9/0x5f0 [amdgpu] ? dcn20_blank_pixel_data+0x30a/0x330 [amdgpu] dcn20_program_pipe+0x259/0xb40 [amdgpu] ? offset_to_id+0x1b0/0x1c0 [amdgpu] dcn20_program_front_end_for_ctx+0x36a/0x450 [amdgpu] commit_planes_for_stream+0x8eb/0x13e0 [amdgpu] This commit fix the above issue by adding YCBCR2020 coefficients to the DPP Color Space Converter (CSC) matrix. Reviewed-by: Nawwar Ali <nawwar.ali@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use viewport height for subvp mall allocation sizeDillon Varone
[WHY?] MALL allocation size depends on the viewport height, not the addressable vertical lines, which will not match when scaling. [HOW?] Base MALL allocation size calculations off viewport height. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Check if PSR enabled when entering MALLAlvin Lee
[Description] - When attempting to enter MALL SS when a PSR panel is connected, we have to check that the PSR panel has already entered PSR because the vsync interrupt call is per display index (can be called for the non-PSR panel first) - Also don't override link settings when programming phantom stream (main and phantom pipe share the same link) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add check for DET fetch latency hiding for dcn32Dillon Varone
[WHY?] Some configurations are constructed with very marginal DET buffers relative to the worst possible time required to fetch a swath. [HOW?] Add a check to see that the DET buffer allocated for each pipe can hide the latency for all pipes to fetch at least one swath. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Use dummy pstate latency for subvp when needed on dcn32Dillon Varone
[WHY?] Prefetch is not budgetting time for dummy pstate when using subvp and low uclk. [HOW?] Override fclk change latency to use dummy pstate latency when calculating prefetch schedule for subvp configs with low uclk. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update soc bounding box for dcn32/dcn321Dillon Varone
[Description] New values for soc bounding box and dummy pstate. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add Z8 allow states to z-state support listNicholas Kazlauskas
[Why] Even if we block Z9 based on crossover threshold it's possible to allow for Z8. [How] There's support for this on DCN314, so update the support types to include a z8 only and z8_z10 only state. Update the decide_zstate_support function to allow for specifying these modes based on the Z8 threshold. DCN31 has z-state disabled, but still update the legacy code to map z8_only = disallow and z10_z8_only = z10_only to keep the support the same. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Update Z8 watermarks for DCN314Nicholas Kazlauskas
[Why & How] Update from HW, need to lower watermarks for enter/enter+exit latency. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Limit HW cursor size of >= 4kAlvin Lee
[Description] - For SubVP, we cannot support HW cursor if it's greater than 64 x 64 x 4 bytes in size - However, on certain config changes (i.e. pixel format) we can exit SubVP (then change to HW cursor) then re-enter SubVP without changing back to SW cursor because there is no SetCursorAttributes call - To workaround this issue, limit the HW cursor size to be less than 64 x 64 x 4 bytes whenever the stream is >= 4K - Also ensure this W/A only affects DCN that supports SubVP Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: No display after resume from WB/CBTsung-hua Lin
[why] First MST sideband message returns AUX_RET_ERROR_HPD_DISCON on certain intel platform. Aux transaction considered failure if HPD unexpected pulled low. The actual aux transaction success in such case, hence do not return error. [how] Not returning error when AUX_RET_ERROR_HPD_DISCON detected on the first sideband message. v2: squash in fix (Alex) Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: new ABM config 2Camille Cho
[Why & How] Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which is to lower the brightness curves in 80%-100% range compared to the existing default config 0. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASANLyude Paul
There's been a very long running bug that seems to have been neglected for a while, where amdgpu consistently triggers a KASAN error at start: BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu] Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889 After digging through amd's rather creative method for accessing registers, I eventually discovered the problem likely has to do with the fact that on my dce120 GPU there are supposedly 7 sets of audio registers. But we only define a register mapping for 6 sets. So, fix this and fix the KASAN warning finally. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from amdgpu_device_resume|suspend_display_audio(), pci_dev_put() is called to avoid refcount leak. Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-20 13:39:36 +0000