summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-22backlight: ktz8866: Add support for Kinetic KTZ8866 backlightJianhua Lu
Add support for Kinetic KTZ8866 backlight, which is used in Xiaomi tablet, Mi Pad 5 series. This driver lightly based on downstream implementation [1]. [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120155018.15376-2-lujianhua000@gmail.com
2023-02-22dt-bindings: leds: backlight: Add Kinetic KTZ8866 backlightJianhua Lu
Add Kinetic KTZ8866 backlight binding documentation. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120155018.15376-1-lujianhua000@gmail.com
2023-02-22backlight: pwm_bl: Don't rely on a disabled PWM emiting inactive stateUwe Kleine-König
Most but not all PWMs drive the PWM pin to its inactive state when disabled. However if there is no enable_gpio and no regulator the PWM must drive the inactive state to actually disable the backlight. So keep the PWM on in this case. Note that to determine if there is a regulator some effort is required because it might happen that there isn't actually one but the regulator core gave us a dummy. (A nice side effect is that this makes the regulator actually optional even on fully constrained systems.) This fixes backlight disabling e.g. on i.MX6 when an inverted PWM is used. Hint for the future: If this change results in a regression, the bug is in the lowlevel PWM driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120120018.161103-3-u.kleine-koenig@pengutronix.de
2023-02-22backlight: pwm_bl: Configure pwm only once per backlight toggleUwe Kleine-König
When the function pwm_backlight_update_status() was called with brightness > 0, pwm_get_state() was called twice (once directly and once in compute_duty_cycle). Also pwm_apply_state() was called twice (once in pwm_backlight_power_on() and once directly). Optimize this to do both calls only once. Note that with this affects the order of regulator and PWM setup. It's not expected to have a relevant effect on hardware. The rationale for this is that the regulator (and the GPIO) are reasonable to switch in pwm_backlight_power_on()/pwm_backlight_power_off() but the PWM has nothing to do with power. (The post_pwm_on_delay and pwm_off_delay are still there though.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230120120018.161103-2-u.kleine-koenig@pengutronix.de
2023-02-22backlight: Remove pxa tosa supportArnd Bergmann
The PXA tosa machine was removed, so this backlight driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105134622.254560-10-arnd@kernel.org
2023-02-22backlight: aat2870: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-2-steve@sk2.org
2023-02-22backlight: ipaq_micro: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-4-steve@sk2.org
2023-02-22backlight: arcxcnn: Use backlight helperStephen Kitt
Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230106164856.1453819-3-steve@sk2.org
2023-02-22backlight: sky81452: Fix sky81452_bl_platform_data kernel-docRandy Dunlap
Correct the struct name and add a short struct description to fix the kernel-doc notation. Prevents this kernel-doc warning: drivers/video/backlight/sky81452-backlight.c:64: warning: expecting prototype for struct sky81452_platform_data. Prototype was for struct sky81452_bl_platform_data instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230113064118.30169-1-rdunlap@infradead.org
2023-02-22backlight: pwm_bl: Drop support for legacy PWM probingUwe Kleine-König
There is no in-tree user left which relies on legacy probing. So drop support for it which removes another user of the deprecated pwm_request() function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221117072151.3789691-1-u.kleine-koenig@pengutronix.de
2023-02-22dt-bindings: backlight: qcom-wled: Add PMI8950 compatibleLuca Weiss
Document the compatible for the wled block found in PMI8950. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221101161801.1058969-1-luca@z3ntu.xyz
2023-02-22backlight: ktd253: Switch to use dev_err_probe() helperYang Yingliang
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. It's more simple in error path. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220926142059.2294282-1-yangyingliang@huawei.com
2023-02-22backlight: backlight: Fix doc for backlight_device_get_by_nameMiaoqian Lin
backlight_put() has been dropped, we should call put_device() to drop the reference taken by backlight_device_get_by_name(). Fixes: 0f6a3256fd81 ("backlight: backlight: Drop backlight_put()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221215071902.424005-1-linmq006@gmail.com
2023-02-22Merge branch 'for-6.3/hid-bpf' into for-linusBenjamin Tissoires
Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit bf7660dab30d ("HID: stop drivers from selecting CONFIG_HID") conflicts with commit 2afac81dd165 ("HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is") the resolution is simple enough: just drop the "default" and "select" lines as the new commit from Arnd is doing
2023-02-22Merge branch 'for-6.3/uclogic' into for-linusBenjamin Tissoires
UClogic assorted fixes and new devices support (José Expósito)
2023-02-22Merge branch 'for-6.3/steam' into for-linusBenjamin Tissoires
Add Steam Deck support (Vicki Pfau)
2023-02-22Merge branch 'for-6.3/sony' into for-linusBenjamin Tissoires
- enforce DS4 controllers to use hid-playstation (Roderick Colenbrander) - various hid-playstation gyro fixes (Roderick Colenbrander)
2023-02-22Merge branch 'for-6.3/multitouch' into for-linusBenjamin Tissoires
Allow to pass quirks from i2c-hid to hid-multitouch (Allen Ballway & Dmitry Torokhov)
2023-02-22Merge branch 'for-6.3/mcp2221' into for-linusBenjamin Tissoires
prevent UAF in delayed work (Benjamin Tissoires)
2023-02-22Merge branch 'for-6.3/logitech' into for-linusBenjamin Tissoires
- HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - add support of Logitech G923 Xbox Edition steering wheel (Walt Holman)
2023-02-22Merge branch 'for-6.3/i2c-hid' into for-linusBenjamin Tissoires
- dev_dbg cleanup (Thomas Weißschuh) - cleanup i2c-hid-acpi (Andy Shevchenko) - goodix: revert/fixes for an actual production device compared to the manufacturer sample (Douglas Anderson)
2023-02-22Merge branch 'for-6.3/hid-sensor' into for-linusBenjamin Tissoires
Allow more custom IIO sensors through HID (Philipp Jungkamp)
2023-02-22Merge branch 'for-6.3/evision' into for-linusBenjamin Tissoires
New hid-evision driver for EVision keyboards (Philippe Valembois)
2023-02-22Merge branch 'for-6.3/bigben' into for-linusBenjamin Tissoires
UAF protection in work struct (Pietro Borrello)
2023-02-22Merge branch 'for-6.3/asus' into for-linusBenjamin Tissoires
UAF protection in work struct (Pietro Borrello)
2023-02-22Merge branch 'for-6.3/hid-core' into for-linusBenjamin Tissoires
- constify hid_ll_driver (Thomas Weißschuh) - map standard Battery System Charging to upower (José Expósito) - couple of assorted fixes and new handling of HID usages (Jingyuan Liang & Ronald Tschalär)
2023-02-22mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leakLiang He
In arizona_clk32k_enable(), we should use pm_runtime_resume_and_get() as pm_runtime_get_sync() will increase the refcnt even when it returns an error. Signed-off-by: Liang He <windhl@126.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105061055.1509261-1-windhl@126.com
2023-02-22mfd: syscon: Allow reset control for syscon devicesJeremy Kerr
Simple syscon devices may require deassertion of a reset signal in order to access their register set. Rather than requiring a custom driver to implement this, we can use the generic "resets" specifiers to link a reset line to the syscon. This change adds an optional reset line to the syscon device description, and deasserts the reset if detected. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105005010.124948-3-jk@codeconstruct.com.au
2023-02-22dt-bindings: mfd/syscon: Add resets propertyJeremy Kerr
Simple syscon devices may require deassertion of a reset signal in order to access their register set. This change adds the `resets` property from reset.yaml#/properties/resets (referenced through core.yaml), specifying a maxItems of 1 for a single (optional) reset descriptor. This will allow a future change to the syscon driver to implement reset control. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105005010.124948-2-jk@codeconstruct.com.au
2023-02-22dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatibleBrad Larson
Add the AMD Pensando Elba SoC system registers compatible Signed-off-by: Brad Larson <blarson@amd.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230119035136.21603-6-blarson@amd.com
2023-02-22dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226Matti Lehtimäki
Document the qcom,msm8226-tcsr compatible. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230112202612.791455-5-matti.lehtimaki@gmail.com
2023-02-22mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registrationLee Jones
Signed-off-by: Lee Jones <lee@kernel.org>
2023-02-22mfd: axp20x: Switch to the sys-off handler APISamuel Holland
This removes a layer of indirection through pm_power_off() and allows the PMIC handler to be used as a fallback when firmware power off fails. This happens on boards like the Clockwork DevTerm R-01 where OpenSBI does not know how to use the PMIC to power off the board. Move the check for AXP288 to avoid registering a dummy handler. Signed-off-by: Samuel Holland <samuel@sholland.org> [Lee: Removed superfluous new line] Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221228162752.14204-1-samuel@sholland.org
2023-02-22mfd: core: Spelling s/compement/complement/Geert Uytterhoeven
Fix a misspelling of "complement". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/aa7abd7103a0e4be954ea63de78f12e8251b2964.1673271092.git.geert+renesas@glider.be
2023-02-22mfd: max8925: Remove the unused function irq_to_max8925()Jiapeng Chong
The function irq_to_max8925() is defined in the max8925-core.c file, but not called elsewhere, so remove this unused function. drivers/mfd/max8925-core.c:472:40: warning: unused function 'irq_to_max8925'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3561 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221227081805.54185-1-jiapeng.chong@linux.alibaba.com
2023-02-22mfd: qcom-pm8xxx: Remove set but unused variable 'rev'Jiapeng Chong
Variable rev is not effectively used in the function, so delete it. drivers/mfd/qcom-pm8xxx.c:513:6: warning: variable 'rev' set but not used. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3558 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221227081921.56448-1-jiapeng.chong@linux.alibaba.com
2023-02-22dt-bindings: mfd: syscon: Document GXP register compatibleNick Hawkins
Document hpe,gxp-sysreg compatible for GXP registers. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221216183532.78933-4-nick.hawkins@hpe.com
2023-02-22mfd: twl4030-power: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221212214352.3776110-1-u.kleine-koenig@pengutronix.de
2023-02-22mfd: twl: Fix TWL6032 phy vbus detectionAndreas Kemnade
TWL6032 has a few charging registers prepended before the charging registers the TWL6030 has. To be able to use common register defines declare the additional registers as additional module. At the moment this affects the access to CHARGERUSB_CTRL1 in phy-twl6030-usb. Without this patch, it is accessing the wrong register on TWL6032. The consequence is that presence of Vbus is not reported. Cc: Bin Liu <b-liu@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221208215723.217557-1-andreas@kemnade.info
2023-02-22mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()Qiheng Lin
`req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure. Fixes: 08c3e06a5eb2 ("mfd: PCF50633 adc driver") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com
2023-02-22MAINTAINERS: Move MFD from a Supported to Maintaied stateLee Jones
No one is funding MFD maintenance. S: *Status*, one of the following: Supported: Someone is actually paid to look after this. Maintained: Someone actually looks after it. Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221206105038.124613-1-lee@kernel.org
2023-02-22dt-bindings: mfd: cros-ec: Add compatible string for UART supportBhanu Prakash Maiya
Add a compatible string to support the UART implementation of the cros ec interface. The driver does not support the reg and interrupt properties, so exempt them from being required for UART compatible nodes. Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@chromium.org> Co-developed-by: Mark Hasemeyer <markhas@chromium.org> Signed-off-by: Mark Hasemeyer <markhas@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221207104005.v10.2.I9e018ecb8bdf341648cb64417085978ff0d22a46@changeid
2023-02-22mfd: Use sysfs_emit() to instead of scnprintf()ye xingchen
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202212021528368292334@zte.com.cn
2023-02-22mfd: cs5535: Don't build on UMLRandy Dunlap
The cs5535-mfd driver uses CPU-specific data that is not available for ARCH=um builds, so don't allow it to be built for UML. Prevents these build errors: In file included from ../arch/x86/include/asm/olpc.h:7, from ../drivers/mfd/cs5535-mfd.c:17: ../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’: ../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 17 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 18 | (boot_cpu_data.x86_model == 5)); ../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’: ../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 24 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 25 | (boot_cpu_data.x86_model == 10)); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
2023-02-22mfd: axp20x: Fix order of pek rise and fall eventsAren Moynihan
The power button can get "stuck" if the rising edge and falling edge irq are read in the same pass. This can often be triggered when resuming from suspend if the power button is released before the kernel handles the interrupt. Swapping the order of the rise and fall events makes sure that the press event is handled first, which prevents this situation. Signed-off-by: Aren Moynihan <aren@peacevolution.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221208220225.635414-1-aren@peacevolution.org
2023-02-22dt-bindings: mfd: qcom,spmi-pmic: Document PMICs bundled with SM8550Neil Armstrong
Document compatible for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550. pm8010 & pmr735d SPMI PMICs Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-1-b839bf2d558a@linaro.org
2023-02-22mfd: rk808: Re-add rk808-clkout to RK818Tom Fitzhenry
Fixes RK818 (e.g. on Pinephone Pro) to register its clock, without which dependent devices (e.g. wifi/BT, via sdio-wifi-pwrseq) fail to probe. This line was removed in commit 3633daacea2e ("mfd: rk808: Permit having multiple PMIC instances"), but only from RK818. Fixes: 3633daacea2e ("mfd: rk808: Permit having multiple PMIC instances") Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230102111147.2580861-1-tom@tom-fitzhenry.me.uk
2023-02-22Merge tags 'ib-mfd-extcon-i2c-v6.3' and 'ib-mfd-fpga-hwmon-v6.3-1' into ↵Lee Jones
ibs-for-mfd-merged Immutable branch between MFD, Extcon and I2C due for the v6.3 merge window Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'v6.3-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
generated by cgit (git 2.34.1) at 2025-09-21 18:05:28 +0000