| Age | Commit message (Collapse) | Author |
|---|
|
Add thermal zone and cooling map for cpufreq.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add A53 and A72 opp_table.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Dtschema of the leds sub-node names expects "led-1" instead of led1.
So, the sub-node names are corrected according to the regexes.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The reg size of etm nodes is incorrectly set to 64k instead of 4k. This
leads to a crash when calling amba_read_periphid(). After corrected reg
size, amba_read_periphid() retrieve the correct periphid.
arm,primecell-periphid were removed from the etm nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Two entries are expected for PCIe ranges.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' was expected
'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imxrt1050-lpuart' was expected
'fsl,imx8ulp-lpuart' was expected
'fsl,imx8qxp-lpuart' was expected
'fsl,imxrt1170-lpuart' was expected
From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add reserved memory node for rpmsg
Enable CM33 node with mailbox property included for doorbell.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add CM33 node for i.MX93
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add CMA region for DMA usage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add tmu node and thermal-zones
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
scl-gpios and sda-gpios need GPIO_OPEN_DRAIN flag, otherwise the
following run-time warning is seen:
gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | | +2 | | | +2 |
| enetc #3 | | +3 | | | +3 |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i2c4 sda-/scl-gpios with the corresponding pinmux entries.
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Set Pull Resistors Enable bit to put signal into a defined state.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add TPM node for phyBOARD-Polis i.MX 8M Mini which has the Infineon-SLB
9670 TPM2.0 module populated.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Beacon Embedded imx8mm development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plugging.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix typo in imx8mm-venice-gw72xx-0x-imx219 overlay causing it to use
gw73xx configuration.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the imx8mp-venice-gw74xx for revB:
- add CAN1
- add TIS-TPM on SPI2
- add FAN controller
- fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
backward compatible option)
- M2 socket GPIO's moved
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On the GW7904 uart1 can use UART3_TX/RX for hardware flow control
which was the desired default configuration. Remove uart3 and configure
uart1 for hardware flow control.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7902 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
Cypress CYW43455 which supports SDR50/SDR104.
Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.
While at it add the dt node for the CYW43455 wifi.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7901 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
Cypress CYW43455 which supports SDR50/SDR104.
Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.
While at it add the dt node for the CYW43455 wifi for the brcmfmac
driver.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'power-supply' is an invalid property for usdhc and it gives
the following schema warning:
imx8mq-librem5-r2.dtb: mmc@30b40000: Unevaluated properties are not allowed ('power-supply' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
Change it to 'vqmmc-supply', which represents the supply for the bus IO.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq update from Borislav Petkov:
- Optimize IRQ domain's name assignment
* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Use return value of strreplace()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
|
|
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
|
|
Pull NTB updates from Jon Mason:
"Fixes for pci_clean_master, error handling in driver inits, and
various other issues/bugs"
* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
ntb: hw: amd: Fix debugfs_create_dir error checking
ntb.rst: Fix copy and paste error
ntb_netdev: Fix module_init problem
ntb: intel: Remove redundant pci_clear_master
ntb: epf: Remove redundant pci_clear_master
ntb_hw_amd: Remove redundant pci_clear_master
ntb: idt: drop redundant pci_enable_pcie_error_reporting()
MAINTAINERS: git://github -> https://github.com for jonmason
NTB: EPF: fix possible memory leak in pci_vntb_probe()
NTB: ntb_tool: Add check for devm_kcalloc
NTB: ntb_transport: fix possible memory leak while device_register() fails
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: idt: Fix error handling in idt_pci_driver_init()
|
|
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
|
|
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Check for NULL bdev in LoadPin (Matthias Kaehlcke)
- Revert unwanted KUnit FORTIFY build default
- Fix 1-element array causing boot warnings with xhci-hub
* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Revert "fortify: Allow KUnit test to build without FORTIFY"
dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
