| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds basic ethtool support to the device to allow
for configuration.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
With recent changes, need to bump the driver version to reflect the
changes.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove the redundant 'igc_get_phy_id_base' method and use
the 'igc_get_phy_id' method directly instead.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove the redundant 'igc_read_mac_addr_base' method and use
the 'igc_read_mac_addr' method directly instead.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.
[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove the 'igc_get_link_up_info_base method' from igc_base.c file.
Use the 'igc_get_speed_and_duplex_copper' method directly and reduce
the code redundancy.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove unused igc_adv_data_desc definition from igc_base.h file.
Descriptors definition will be added per demand.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Since mISDN_close() uses dev->pending to iterate over active
timers, there is a chance that one timer got removed from the
->pending list in dev_expire_timer() but that the thread
has not called yet wake_up_interruptible()
So mISDN_close() could miss this and free dev before
completion of at least one dev_expire_timer()
syzbot was able to catch this race :
BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769
CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140
register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
__lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
__wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120
__wake_up+0xe/0x10 kernel/sched/wait.c:145
dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
protocol 88fb is buggy, dev hsr_slave_0
protocol 88fb is buggy, dev hsr_slave_1
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
</IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101
Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48
RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3
RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001
RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0
R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680
R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648
PageIdle include/linux/page-flags.h:398 [inline]
page_is_idle include/linux/page_idle.h:29 [inline]
mark_page_accessed+0x618/0x1140 mm/swap.c:398
touch_buffer fs/buffer.c:59 [inline]
__find_get_block+0x312/0xcc0 fs/buffer.c:1298
sb_find_get_block include/linux/buffer_head.h:338 [inline]
recently_deleted fs/ext4/ialloc.c:682 [inline]
find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722
__ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914
ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096
vfs_symlink fs/namei.c:4126 [inline]
vfs_symlink+0x378/0x5d0 fs/namei.c:4112
do_symlinkat+0x22b/0x290 fs/namei.c:4153
__do_sys_symlink fs/namei.c:4172 [inline]
__se_sys_symlink fs/namei.c:4170 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4170
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457b67
Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67
RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001
Allocated by task 24763:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59
misc_open+0x398/0x4c0 drivers/char/misc.c:141
chrdev_open+0x247/0x6b0 fs/char_dev.c:417
do_dentry_open+0x47d/0x1130 fs/open.c:771
vfs_open+0xa0/0xd0 fs/open.c:880
do_last fs/namei.c:3418 [inline]
path_openat+0x10d7/0x4690 fs/namei.c:3534
do_filp_open+0x1a1/0x280 fs/namei.c:3564
do_sys_open+0x3fe/0x5d0 fs/open.c:1063
__do_sys_openat fs/open.c:1090 [inline]
__se_sys_openat fs/open.c:1084 [inline]
__x64_sys_openat+0x9d/0x100 fs/open.c:1084
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 24762:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97
__fput+0x2df/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88809fc18900
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 72 bytes inside of
192-byte region [ffff88809fc18900, ffff88809fc189c0)
The buggy address belongs to the page:
page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040
raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ATU port vector contains a bit per port of the switch. The code
wrongly used it as a port number, and incremented a port counter. This
resulted in the wrong interfaces counter being incremented, and
potentially going off the end of the array of ports.
Fix this by using the source port ID for the violation, which really
is a port number.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Tested-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 65f60e4582bd ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The change is based on the issue found by Kangjie Lu <kjlu@umn.edu> where
we not checking the return value of a register read/write which could result
in a NULL pointer dereference if the read/write fails.
Since we are only trying to disable the far-end loopback, if the read
and write of register fails, we do not want to bail out of the function.
We just want to log that it failed to disable and continue on.
CC: Sasha Neftin <sasha.neftin@intel.com>
CC: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The function comment for fm10k_iov_msg_msix_pf has an extra space in
a sentence, which is unnecessary.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
ixgbe_reset_hw_82599() resets the value of hw->mac.num_rar_entries to
pre-defined value of 128. Let's get rid of that hardcoded literal, and use
IXGBE_82599_RAR_ENTRIES instead, the same way the normal initialization
path does.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove redundant igc_check_for_link_base code and replace it with
an igc_check_for_copper_link method.
Fix duplication of IGC_ADVTXD_PAYLEN_SHIFT mask declaration.
Remove obsolete IGC_SCVPC register definition.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The documentation of Intel drivers is missing the heading adornment for
document titles.
This causes the generated html to have TOC entries from these documents to
appear as top level TOC entries:
* Linux* Base Driver for Intel(R) Ethernet Network Connection
* Contents
* Identifying Your Adapter
* Command Line Parameters
* AutoNeg
* Duplex
...
Add overline heading adornment to document titles.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Address community comment.
Remove the unreachable code leads to the static checker warning.
PHY functionality will be added later per demand.
Reported by Dan Carpenter.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
e1000e sets different WoL settings in system suspend callback and
runtime suspend callback.
The suspend direct complete optimization leaves e1000e in runtime
suspended state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let e1000e always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Make it clear that it is a failure if the cpufreq driver was unable to
register as a cooling device. Makes it easier to find in logs and
grepping for words like fail, err, warn.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Make it easier to debug devicetree definition in case of errors.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
[Why]
eDP was missing in the checks for supported VRR connectors.
[How]
Attach the properties for eDP connectors too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_crat.c:866:5: warning:
'CONFIG_X86_64' is not defined, evaluates to 0 [-Wundef]
^
1 warning generated.
Fixes: d1c234e2cd10 ("drm/amdkfd: Allow building KFD on ARM64 (v2)")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent
erase properties") introduced a check to make sure ->erasesize and
->_erase values are consistent with the MTD_NO_ERASE flag.
This patch did not take the 0 bytes partition case into account which
can happen when the defined partition is outside the flash device memory
range. Fix that by setting the partition erasesize to the parent
erasesize.
Fixes: 33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This makes the age information for cfg80211 scan results more accurate
and fixes issues with wpa_supplicant dropping "old" scan results (e.g.,
"wlan0: Own scan request started a scan in 0.000456 seconds") that
looked like would have been received before a scan started due to the
inaccuracy of the default timing mechanism for calculating the BSS entry
age. This makes hwsim test cases significantly more robust to run.
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-fixes-2019-02-05
|
|
It is normal user behaviour to start, stop, then start a stream
again without closing it. Currently this works for compressed
playback streams but not capture ones.
The states on a compressed capture stream go directly from OPEN to
PREPARED, unlike a playback stream which moves to SETUP and waits
for a write of data before moving to PREPARED. Currently however,
when a stop is sent the state is set to SETUP for both types of
streams. This leaves a capture stream in the situation where a new
start can't be sent as that requires the state to be PREPARED and
a new set_params can't be sent as that requires the state to be
OPEN. The only option being to close the stream, and then reopen.
Correct this issues by allowing snd_compr_drain_notify to set the
state depending on the stream direction, as we already do in
set_params.
Fixes: 49bb6402f1aa ("ALSA: compress_core: Add support for capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There's no reason to expose struct vring_packed in UAPI - if we do we
won't be able to change or drop it, and it's not part of any interface.
Let's move it to virtio_ring.c
Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
decap flows
In packets that need to be decaped the internal headers
have to be checked, not the external ones.
Fixes: bdd66ac0aeed ("net/mlx5e: Disallow TC offloading of unsupported match/action combinations")
Signed-off-by: Guy Shattah <sguy@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The match level computed by the driver gets to be wrong for decap
rules with wildcarded inner packet match such as:
tc filter add dev vxlan_sys_4789 protocol all parent ffff: prio 2 flower
enc_dst_ip 192.168.0.9 enc_key_id 100 enc_dst_port 4789
action tunnel_key unset
action mirred egress redirect dev eth1
The FW errs for a missing matching meta-data indicator for the outer
headers (where we do have a match), and a wrong matching meta-data
indicator for the inner headers (where we don't have a match).
Fix that by taking into account the matching on the tunnel info and
relating the match level of the encapsulated packet to the firmware
inner headers indicator in case of decap.
As for vxlan we mandate a match on the tunnel udp dst port, and in general
we practically madndate a match on the source or dest ip for any IP tunnel,
the fix was done in a minimal manner around the tunnel match parsing code.
Fixes: d708f902989b ('net/mlx5e: Get the required HW match level while parsing TC flow matches')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Slava Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
At Innova IPsec TX offload data path a special software parser metadata
is used to pass some packet attributes to the hardware, this metadata
is passed using the Ethernet control segment of a WQE (a HW descriptor)
header.
The cited commit might nullify this header, hence the metadata is lost,
this caused a significant performance drop during hw offloading
operation.
Fix by restoring the metadata at the Ethernet control segment in case
it was nullified.
Fixes: 37fdffb217a4 ("net/mlx5: WQ, fixes for fragmented WQ buffers API")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET.
From Naresh Kamboju.
2) Add a test to cover masquerading and redirect case, from Florian
Westphal.
3) Two packets coming from the same socket may race to set up NAT,
ending up with different tuples and the packet losing race being
dropped. Update nf_conntrack_tuple_taken() to exercise clash
resolution for this case. From Martynas Pumputis and Florian
Westphal.
4) Unbind anonymous sets from the commit and abort path, this fixes
a splat due to double set list removal/release in case that the
transaction needs to be aborted.
5) Do not preserve original output interface for packets that are
redirected in the output chain when ip6_route_me_harder() is
called. Otherwise packets end up going not going to the loopback
device. From Eli Cooper.
6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this
also simplifies the existing logic to deal with the list insertions
of the xtables extensions. From Florian Westphal.
Diffstat look rather larger than usual because of the new selftest, but
Florian and I consider that having tests soon into the tree is good to
improve coverage. If there's a different policy in this regard, please,
let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sven Auhagen reports that if he changes a SFP+ module for a SFP module
on the Macchiatobin Single Shot, the link does not come back up. For
Sven, it is as easy as:
- Insert a SFP+ module connected, and use ping6 to verify link is up.
- Remove SFP+ module
- Insert SFP 1000base-X module use ping6 to verify link is up: Link
up event did not trigger and the link is down
but that doesn't show the problem for me. Locally, this has been
reproduced by:
- Boot with no modules.
- Insert SFP+ module, confirm link is up.
- Replace module with 25000base-X module. Confirm link is up.
- Set remote end down, link is reported as dropped at both ends.
- Set remote end up, link is reported up at remote end, but not local
end due to lack of link interrupt.
Fix this by setting up both GMAC and XLG interrupts for port 0, but
only unmasking the appropriate interrupt according to the current mode
set in the mac_config() method. However, only do the mask/unmask
dance when we are really changing the link mode to avoid missing any
link interrupts.
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the phy_interface_mode_is_8023z() helper for detecting interface
modes that use 802.3z serial encoding. This is equivalent to testing
for both 1000base-X and 2500base-X.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moritz Fischer says:
====================
nixge: Fixed-link support
This series adds fixed-link support to nixge.
The first patch corrects the binding to correctly reflect
hardware that does not come with MDIO cores instantiated.
The second patch adds fixed link support to the driver.
The third patch updates the binding document with the now
optional (formerly required) phy-handle property and references
the fixed-link docs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update device-tree binding with fixed-link support.
With fixed-link support the formerly required property 'phy-handle'
is now optional if 'fixed-link' child is present.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for fixed-link configurations to nixge driver.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make MDIO child optional and only instantiate the
MDIO bus if the child is actually present.
There are currently no (in-tree) users of this
binding; all (out-of-tree) users use overlays that
get shipped together with the FPGA images that contain
the IP.
This will significantly increase maintainabilty
of future revisions of this IP.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the T+A VID to the generic check in order to enable
native DSD support for T+A devices. This works with the new T+A USB
DAC model SD3100HV and will also work with future devices which
support the XMOS/Thesycon style DSD format.
Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Björn Töpel says:
====================
This v2 series adds an RV64G BPF JIT to the kernel.
At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES (Patrick Stählin sent out an RFC last year), which
means that CONFIG_BPF_EVENTS is not supported. Thus, no tests
involving BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT,
BPF_PROG_TYPE_KPROBE and BPF_PROG_TYPE_RAW_TRACEPOINT passes.
The implementation does not support "far branching" (>4KiB).
Test results:
# modprobe test_bpf
test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier
...
Summary: 761 PASSED, 507 SKIPPED, 2 FAILED
Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
0
No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
59
The two failing test_verifier tests are:
"ld_abs: vlan + abs, test 1"
"ld_abs: jump around ld_abs"
This is due to that "far branching" involved in those tests.
All tests where done on QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106). I'll test it on real hardware, when I get
access to it.
I'm routing this patch via bpf-next/netdev mailing list (after a
conversation with Palmer at FOSDEM), mainly because the other JITs
went that path.
Again, thanks for all the comments!
Cheers,
Björn
v1 -> v2:
* Added JMP32 support. (Daniel)
* Add RISC-V to Documentation/sysctl/net.txt. (Daniel)
* Fixed seen_call() asymmetry. (Daniel)
* Fixed broken bpf_flush_icache() range. (Daniel)
* Added alignment annotations to some selftests.
RFCv1 -> v1:
* Cleaned up the Kconfig and net/Makefile. (Christoph)
* Removed the entry-stub and squashed the build/config changes to be
part of the JIT implementation. (Christoph)
* Simplified the register tracking code. (Daniel)
* Removed unused macros. (Daniel)
* Added myself as maintainer and updated documentation. (Daniel)
* Removed HAVE_EFFICIENT_UNALIGNED_ACCESS. (Christoph, Palmer)
* Added tail-calls and cleaned up the code.
====================
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
RISC-V does, in-general, not have "efficient unaligned access". When
testing the RISC-V BPF JIT, some selftests failed in the verification
due to misaligned access. Annotate these tests with the
F_NEEDS_EFFICIENT_UNALIGNED_ACCESS flag.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Update Documentation/networking/filter.txt and
Documentation/sysctl/net.txt to mention RISC-V.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add Björn Töpel as RISC-V BPF JIT maintainer.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit adds a BPF JIT for RV64G.
The JIT is a two-pass JIT, and has a dynamic prolog/epilogue (similar
to the MIPS64 BPF JIT) instead of static ones (e.g. x86_64).
At the moment the RISC-V Linux port does not support
CONFIG_HAVE_KPROBES, which means that CONFIG_BPF_EVENTS is not
supported. Thus, no tests involving BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_PERF_EVENT, BPF_PROG_TYPE_KPROBE and
BPF_PROG_TYPE_RAW_TRACEPOINT passes.
The implementation does not support "far branching" (>4KiB).
Test results:
# modprobe test_bpf
test_bpf: Summary: 378 PASSED, 0 FAILED, [366/366 JIT'ed]
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier
...
Summary: 761 PASSED, 507 SKIPPED, 2 FAILED
Note that "test_verifier" was run with one build with
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y and one without, otherwise
many of the the tests that require unaligned access were skipped.
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
0
No CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS:
# echo 1 > /proc/sys/kernel/unprivileged_bpf_disabled
# ./test_verifier | grep -c 'NOTE.*unknown align'
59
The two failing test_verifier tests are:
"ld_abs: vlan + abs, test 1"
"ld_abs: jump around ld_abs"
This is due to that "far branching" involved in those tests.
All tests where done on QEMU (QEMU emulator version 3.1.50
(v3.1.0-688-g8ae951fbc106)).
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Andrii Nakryiko says:
====================
This patch series adds BTF deduplication algorithm to libbpf. This algorithm
allows to take BTF type information containing duplicate per-compilation unit
information and reduce it to equivalent set of BTF types with no duplication without
loss of information. It also deduplicates strings and removes those strings that
are not referenced from any BTF type (and line information in .BTF.ext section,
if any).
Algorithm also resolves struct/union forward declarations into concrete BTF types
across multiple compilation units to facilitate better deduplication ratio. If
undesired, this resolution can be disabled through specifying corresponding options.
When applied to BTF data emitted by pahole's DWARF->BTF converter, it reduces
the overall size of .BTF section by about 65x, from about 112MB to 1.75MB, leaving
only 29247 out of initial 3073497 BTF type descriptors.
Algorithm with minor differences and preliminary results before FUNC/FUNC_PROTO
support is also described more verbosely at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
v1->v2:
- rebase on latest bpf-next
- err_log/elog -> pr_debug
- btf__dedup, btf__get_strings, btf__get_nr_types listed under 0.0.2 version
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch sets up a new kind of tests (BTF dedup tests) and tests few aspects of
BTF dedup algorithm. More complete set of tests will come in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch implements BTF types deduplication algorithm. It allows to
greatly compress typical output of pahole's DWARF-to-BTF conversion or
LLVM's compilation output by detecting and collapsing identical types emitted in
isolation per compilation unit. Algorithm also resolves struct/union forward
declarations into concrete BTF types representing referenced struct/union. If
undesired, this resolution can be disabled through specifying corresponding options.
Algorithm itself and its application to Linux kernel's BTF types is
described in details at:
https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This pre-patch extracts calculation of amount of space taken by BTF type descriptor
for later reuse by btf_dedup functionality.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since 2.5.34 the code has had the potential to not allocate siginfo
for SIGSTOP signals. Except for ptrace this is perfectly fine as only
ptrace can use PTRACE_PEEK_SIGINFO and see what the contents of
the delivered siginfo are.
Users of PTRACE_PEEK_SIGINFO that care about the contents siginfo
for SIGSTOP are rare, but they do exist. A seccomp self test
has cared and lldb cares.
Jack Andersen <jackoalan@gmail.com> writes:
> The patch titled
> `signal: Never allocate siginfo for SIGKILL or SIGSTOP`
> created a regression for users of PTRACE_GETSIGINFO needing to
> discern signals that were raised via the tgkill syscall.
>
> A notable user of this tgkill+ptrace combination is lldb while
> debugging a multithreaded program. Without the ability to detect a
> SIGSTOP originating from tgkill, lldb does not have a way to
> synchronize on a per-thread basis and falls back to SIGSTOP-ing the
> entire process.
Everyone affected by this please note. The kernel can still fail to
allocate a siginfo structure. The allocation is with GFP_KERNEL and
is best effort only. If memory is tight when the signal allocation
comes in this will fail to allocate a siginfo.
So I strongly recommend looking at more robust solutions for
synchronizing with a single thread such as PTRACE_INTERRUPT. Or if
that does not work persuading your friendly local kernel developer to
build the interface you need.
Reported-by: Tycho Andersen <tycho@tycho.ws>
Reported-by: Kees Cook <keescook@chromium.org>
Reported-by: Jack Andersen <jackoalan@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Christian Brauner <christian@brauner.io>
Cc: stable@vger.kernel.org
Fixes: f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
Fixes: 6dfc88977e42 ("[PATCH] shared thread signals")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Even if we don't have the correct clock and get a warning, we should not
skip the return.
v2: improve commit message (from Joonas)
Fixes: 1fa11ee2d9d0 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
(cherry picked from commit 7a61a6dec3dfb9f2e8c39a337580a3c3036c5cdf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're incorrectly masking off the R/V channel enable bit from
KEYMSK. Fix it up.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125183846.28755-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 968bf969b47df2481022b9a05eaab02948eec088)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
