summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-21tipc: improve function tipc_wait_for_rcvmsg()Tung Nguyen
This commit replaces schedule_timeout() with wait_woken() in function tipc_wait_for_rcvmsg(). wait_woken() uses memory barriers in its implementation to avoid potential race condition when putting a process into sleeping state and then waking it up. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21tipc: improve function tipc_wait_for_cond()Tung Nguyen
Commit 844cf763fba6 ("tipc: make macro tipc_wait_for_cond() smp safe") replaced finish_wait() with remove_wait_queue() but still used prepare_to_wait(). This causes unnecessary conditional checking before adding to wait queue in prepare_to_wait(). This commit replaces prepare_to_wait() with add_wait_queue() as the pair function with remove_wait_queue(). Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21bridge: remove redundant check on err in br_multicast_ipv4_rcvLi RongQing
br_ip4_multicast_mrd_rcv only return 0 and -ENOMSG, no other negative value Signed-off-by: Li RongQing <lirongqing@baidu.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: remove unneeded switch fall-throughLi RongQing
This case block has been terminated by a return, so not need a switch fall-through Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21bonding: fix PACKET_ORIGDEV regressionMichal Soltys
This patch fixes a subtle PACKET_ORIGDEV regression which was a side effect of fixes introduced by: 6a9e461f6fe4 bonding: pass link-local packets to bonding master also. ... to: b89f04c61efe bonding: deliver link-local packets with skb->dev set to link that packets arrived on While 6a9e461f6fe4 restored pre-b89f04c61efe presence of link-local packets on bonding masters (which is required e.g. by linux bridges participating in spanning tree or needed for lab-like setups created with group_fwd_mask) it also caused the originating device information to be lost due to cloning. Maciej Żenczykowski proposed another solution that doesn't require packet cloning and retains original device information - instead of returning RX_HANDLER_PASS for all link-local packets it's now limited only to packets from inactive slaves. At the same time, packets passed to bonding masters retain correct information about the originating device and PACKET_ORIGDEV can be used to determine it. This elegantly solves all issues so far: - link-local packets that were removed from bonding masters - LLDP daemons being forced to explicitly bind to slave interfaces - PACKET_ORIGDEV having no effect on bond interfaces Fixes: 6a9e461f6fe4 (bonding: pass link-local packets to bonding master also.) Reported-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: sched: potential NULL dereference in tcf_block_find()Dan Carpenter
The error code isn't set on this path so it would result in returning ERR_PTR(0) and a NULL dereference in the caller. Fixes: 18d3eefb17cf ("net: sched: refactor tcf_block_find() into standalone functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: vrf: remove MTU limits for vrf deviceHangbin Liu
Similiar to commit e94cd8113ce63 ("net: remove MTU limits for dummy and ifb device"), MTU is irrelevant for VRF device. We init it as 64K while limit it to [68, 1500] may make users feel confused. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21lib/test_rhashtable: fix spelling mistake "existant" -> "existent"Colin Ian King
There are spelling mistakes in warning macro messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21ipmr: ip6mr: Create new sockopt to clear mfc cache or vifsCallum Sinclair
Currently the only way to clear the forwarding cache was to delete the entries one by one using the MRT_DEL_MFC socket option or to destroy and recreate the socket. Create a new socket option which with the use of optional flags can clear any combination of multicast entries (static or not static) and multicast vifs (static or not static). Calling the new socket option MRT_FLUSH with the flags MRT_FLUSH_MFC and MRT_FLUSH_VIFS will clear all entries and vifs on the socket except for static entries. Signed-off-by: Callum Sinclair <callum.sinclair@alliedtelesis.co.nz> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'net-phy-improve-generic-clause-45-aneg-configuration'David S. Miller
Heiner Kallweit says: ==================== net: phy: improve generic clause 45 aneg configuration Improve generic clause 45 aneg configuration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: marvell10g: use genphy_c45_check_and_restart_aneg in ↵Heiner Kallweit
mv3310_config_aneg Use new function genphy_c45_check_and_restart_aneg() to reduce boilerplate code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: add genphy_c45_check_and_restart_anegHeiner Kallweit
This function will be used by config_aneg callback implementations of PHY drivers and allows to reduce boilerplate code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: use genphy_config_eee_advert in genphy_c45_an_config_anegHeiner Kallweit
Like in genphy_config_aneg() for clause 22 PHY's, we should keep modes from being advertised that are known to be broken with EEE. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: export genphy_config_eee_advertHeiner Kallweit
We want to use this function in phy-c45.c too, therefore export it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'net-phy-improve-genphy_read_status'David S. Miller
Heiner Kallweit says: ==================== net: phy: improve genphy_read_status Series includes two smaller improvements to genphy_read_status. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: don't use 10BaseT/half as default in genphy_read_statusHeiner Kallweit
If link partner and we can't agree on any mode, then it doesn't make sense to pretend we would have agreed on 10/half. Therefore set a proper default. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: remove orphaned register read in genphy_read_statusHeiner Kallweit
After recent changes to genphy_read_status() this orphaned register read remained as leftover. So remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21MAINTAINERS: mark CAIF as orphanJann Horn
The listed address for the CAIF maintainer bounces with "553 5.3.0 <dmitry.tarnyagin@lockless.no>... No such user here", and the only existing email address of the maintainer in git history hasn't responded in a week. Therefore, remove the listed maintainer and mark CAIF as orphan. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-02-21 This series contains fixes to ixgbe and i40e. Majority of the fixes are to resolve XDP issues found in both drivers, there is only one fix which is not XDP related. That one fix resolves an issue seen on older 10GbE devices, where UDP traffic was either being dropped or being transmitted out of order when the bit to enable L3/L4 filtering for transmit switched packets is enabled on older devices that did not support this option. Magnus fixes an XDP issue for both ixgbe and i40e, where receive rings are created but no buffers are allocated for AF_XDP in zero-copy mode, so no packets can be received and no interrupts will be generated so that NAPI poll function that allocates buffers to the rings will never get executed. Björn fixes a race in XDP xmit ring cleanup for i40e, where ndo_xdp_xmit() must be taken into consideration. Added a synchronize_rcu() to wait for napi(s) before clearing the queue. Jan fixes a ixgbe AF_XDP zero-copy transmit issue which can cause a reset to be triggered, so add a check to ensure that netif carrier is 'ok' before trying to transmit packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21CREDITS/MAINTAINERS: Retire parisc-linux.org email domainHelge Deller
Retire the parisc-linux.org email domain and provide alternative email addresses for the remaining users, as agreed upon with them. Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OKJan Sokolowski
An issue has been found while testing zero-copy XDP that causes a reset to be triggered. As it takes some time to turn the carrier on after setting zc, and we already start trying to transmit some packets, watchdog considers this as an erroneous state and triggers a reset. Don't do any work if netif carrier is not OK. Fixes: 8221c5eba8c13 (ixgbe: add AF_XDP zero-copy Tx support) Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21parisc: Fix ptrace syscall number modificationDmitry V. Levin
Commit 910cd32e552e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace. This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this: $ strace -a0 -ewrite -einject=write:error=enospc echo hello write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED) write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED) +++ exited with 1 +++ After commit 910cd32e552ea09caa89cdbe328e468979b030dd it loops printing something like this instead: write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED) This bug was found by strace test suite. Fixes: 910cd32e552e ("parisc: Fix and enable seccomp filter support") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21i40e: fix XDP_REDIRECT/XDP xmit ring cleanup raceBjörn Töpel
When the driver clears the XDP xmit ring due to re-configuration or teardown, in-progress ndo_xdp_xmit must be taken into consideration. The ndo_xdp_xmit function is typically called from a NAPI context that the driver does not control. Therefore, we must be careful not to clear the XDP ring, while the call is on-going. This patch adds a synchronize_rcu() to wait for napi(s) (preempt-disable regions and softirqs), prior clearing the queue. Further, the __I40E_CONFIG_BUSY flag is checked in the ndo_xdp_xmit implementation to avoid touching the XDP xmit queue during re-configuration. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21ARC: define ARCH_SLAB_MINALIGN = 8Alexey Brodkin
The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1] Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into [ 4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.167881] Misaligned Access [ 4.172356] Path: /bin/busybox.nosuid [ 4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1 [ 4.182851] [ 4.182851] [ECR ]: 0x000d0000 => Check Programmer's Manual [ 4.190061] [EFA ]: 0xbeaec3fc [ 4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234 [ 4.190061] [ERET ]: ext4_delete_entry+0x13e/0x234 [ 4.202985] [STAT32]: 0x80080002 : IE K [ 4.207236] BTA: 0x9009329c SP: 0xbe5b1ec4 FP: 0x00000000 [ 4.212790] LPS: 0x9074b118 LPE: 0x9074b120 LPC: 0x00000000 [ 4.218348] r00: 0x00000040 r01: 0x00000021 r02: 0x00000001 ... ... [ 4.270510] Stack Trace: [ 4.274510] ext4_delete_entry+0x13e/0x234 [ 4.278695] ext4_rmdir+0xe0/0x238 [ 4.282187] vfs_rmdir+0x50/0xf0 [ 4.285492] do_rmdir+0x9e/0x154 [ 4.288802] EV_Trap+0x110/0x114 The fix is to make sure slab allocations are 64-bit aligned. Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures. [1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog, added dependency on LL64+LLSC]
2019-02-21ARC: enable uboot support unconditionallyEugeniy Paltsev
After reworking U-boot args handling code and adding paranoid arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and enable uboot support unconditionally. For JTAG case we can assume that core registers will come up reset value of 0 or in worst case we rely on user passing '-on=clear_regs' to Metaware debugger. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARC: U-boot: check arguments paranoidlyEugeniy Paltsev
Handle U-boot arguments paranoidly: * don't allow to pass unknown tag. * try to use external device tree blob only if corresponding tag (TAG_DTB) is set. * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT. NOTE: If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code. This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass {r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid. While I'm at it refactor U-boot arguments handling code. Cc: stable@vger.kernel.org Tested-by: Corentin LABBE <clabbe@baylibre.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARCv2: support manual regfile save on interruptsVineet Gupta
There's a hardware bug which affects the HSDK platform, triggered by micro-ops for auto-saving regfile on taken interrupt. The workaround is to inhibit autosave. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARC: uacces: remove lp_start, lp_end from clobber listVineet Gupta
Newer ARC gcc handles lp_start, lp_end in a different way and doesn't like them in the clobber list. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARC: fix actionpoints configuration detectionEugeniy Paltsev
Fix reversed logic while actionpoints configuration (full/min) detection. Fixies: 7dd380c338f1e ("ARC: boot log: print Action point details") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARCv2: lib: memcpy: fix doing prefetchw outside of bufferEugeniy Paltsev
ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause data corruption if this area is used for DMA IO. Fix the issue by avoiding the PREFETCHW. This leads to performance degradation but it is OK as we'll introduce new memcpy implementation optimized for unaligned memory access using. We also cut off all PREFETCH instructions at they are quite useless here: * we call PREFETCH right before LOAD instruction call. * we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64) in a main logical loop. so we call PREFETCH 4 times (or 2 times) for each L1 cache line (in case of 64B L1 cache Line which is default case). Obviously this is not optimal. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21ARCv2: Enable unaligned access in early ASM codeEugeniy Paltsev
It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog]
2019-02-21ixgbe: fix potential RX buffer starvation for AF_XDPMagnus Karlsson
When the RX rings are created they are also populated with buffers so that packets can be received. Usually these are kernel buffers, but for AF_XDP in zero-copy mode, these are user-space buffers and in this case the application might not have sent down any buffers to the driver at this point. And if no buffers are allocated at ring creation time, no packets can be received and no interrupts will be generated so the NAPI poll function that allocates buffers to the rings will never get executed. To rectify this, we kick the NAPI context of any queue with an attached AF_XDP zero-copy socket in two places in the code. Once after an XDP program has loaded and once after the umem is registered. This take care of both cases: XDP program gets loaded first then AF_XDP socket is created, and the reverse, AF_XDP socket is created first, then XDP program is loaded. Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21i40e: fix potential RX buffer starvation for AF_XDPMagnus Karlsson
When the RX rings are created they are also populated with buffers so that packets can be received. Usually these are kernel buffers, but for AF_XDP in zero-copy mode, these are user-space buffers and in this case the application might not have sent down any buffers to the driver at this point. And if no buffers are allocated at ring creation time, no packets can be received and no interrupts will be generated so the NAPI poll function that allocates buffers to the rings will never get executed. To rectify this, we kick the NAPI context of any queue with an attached AF_XDP zero-copy socket in two places in the code. Once after an XDP program has loaded and once after the umem is registered. This take care of both cases: XDP program gets loaded first then AF_XDP socket is created, and the reverse, AF_XDP socket is created first, then XDP program is loaded. Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21qed: Read device port count from the shmemSudarsana Reddy Kalluru
Read port count from the shared memory instead of driver deriving this value. This change simplifies the driver implementation and also avoids any dependencies for finding the port-count. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWENJeff Kirsher
The enabling L3/L4 filtering for transmit switched packets for all devices caused unforeseen issue on older devices when trying to send UDP traffic in an ordered sequence. This bit was originally intended for X550 devices, which supported this feature, so limit the scope of this bit to only X550 devices. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2019-02-21Merge branch 'devlink-next'David S. Miller
Eran Ben Elisha says: ==================== Devlink health fixes series This series includes two small fixes from Aya for the devlink health infrastructure introduced earlier in this window. First patch rename some UAPI attributes to better reflect their use. Second patch reduces the amount of data passed from the devlink to the netlink layer upon get reporter command, in case of no-recovery reporter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21devlink: Modify reply of DEVLINK_CMD_HEALTH_REPORTER_GETAya Levin
Avoid sending attributes related to recovery: DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD and DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER in reply to DEVLINK_CMD_HEALTH_REPORTER_GET for a reporter which didn't register a recover operation. These parameters can't be configured on a reporter that did not provide a recover operation, thus not needed to return them. Fixes: 7afe335a8bed ("devlink: Add health get command") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21devlink: Rename devlink health attributesAya Levin
Rename devlink health attributes for better reflect the attributes use. Add COUNT prefix on error counter attribute and recovery counter attribute. Fixes: 7afe335a8bed ("devlink: Add health get command") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'smc-next'David S. Miller
Ursula Braun says: ==================== net/smc: patches 2019-02-21 here are patches for SMC: * patch 1 is a cleanup without functional change * patches 2-6 enhance SMC pnetid support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: allow PCI IDs as ib device names in the pnet tableHans Wippel
SMC-D devices are identified by their PCI IDs in the pnet table. In order to make usage of the pnet table more consistent for users, this patch adds this form of identification for ib devices as well. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: add pnet table namespace supportHans Wippel
This patch adds namespace support to the pnet table code. Each network namespace gets its own pnet table. Infiniband and smcd device pnetids can only be modified in the initial namespace. In other namespaces they can still be used as if they were set by the underlying hardware. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: add smcd support to the pnet tableHans Wippel
Currently, users can only set pnetids for netdevs and ib devices in the pnet table. This patch adds support for smcd devices to the pnet table. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: rework pnet tableHans Wippel
If a device does not have a pnetid, users can set a temporary pnetid for said device in the pnet table. This patch reworks the pnet table to make it more flexible. Multiple entries with the same pnetid but differing devices are now allowed. Additionally, the netlink interface now sends each mapping from pnetid to device separately to the user while maintaining the message format existing applications might expect. Also, the SMC data structure for ib devices already has a pnetid attribute. So, it is used to store the user defined pnetids. As a result, the pnet table entries are only used for netdevs. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21s390/net: convert pnetids to asciiHans Wippel
Pnetids are retrieved from the underlying hardware as EBCDIC. This patch converts pnetids to ASCII. Signed-off-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: cleanup for smcr_tx_sndbuf_nonemptyUrsula Braun
Use local variable pflags from the beginning of function smcr_tx_sndbuf_nonempty Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net/smc: fix smc_poll in SMC_INIT stateUrsula Braun
smc_poll() returns with mask bit EPOLLPRI if the connection urg_state is SMC_URG_VALID. Since SMC_URG_VALID is zero, smc_poll signals EPOLLPRI errorneously if called in state SMC_INIT before the connection is created, for instance in a non-blocking connect scenario. This patch switches to non-zero values for the urg states. Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Fixes: de8474eb9d50 ("net/smc: urgent data support") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'ipv6-route-rcu'David S. Miller
Paolo Abeni says: ==================== ipv6: route: enforce RCU protection for fib6_info->from This series addresses a couple of RCU left-over dating back to rt6_info->from conversion to RCU v1 -> v2: - fix a possible race in patch 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21ipv6: route: enforce RCU protection in ip6_route_check_nh_onlink()Paolo Abeni
We need a RCU critical section around rt6_info->from deference, and proper annotation. Fixes: 4ed591c8ab44 ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21ipv6: route: enforce RCU protection in rt6_update_exception_stamp_rt()Paolo Abeni
We must access rt6_info->from under RCU read lock: move the dereference under such lock, with proper annotation. v1 -> v2: - avoid using multiple, racy, fetch operations for rt->from Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Two bug fixes for old issues, both marked for stable" * tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-client: ceph: avoid repeatedly adding inode to mdsc->snap_flush_list libceph: handle an empty authorize reply
generated by cgit (git 2.34.1) at 2025-09-14 10:06:01 +0000