summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-12[media] vivid: set V4L2_CAP_TIMEPERFRAMEHans Verkuil
The vivid driver didn't set the V4L2_CAP_TIMEPERFRAME flag in s_parm for the non-webcam inputs. This caused a v4l2-compliance fail. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] mtk-vcodec: fix sparse warningTiffany Lin
This patch fix sparse warning when running with parameters: C=2 CF="-D__CHECK_ENDIAN__" Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: PoChun Lin <pochun.lin@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] mtk-vcodec: fix platform_no_drv_owner.cocci warningsFengguang Wu
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:433:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] vidioc-g-dv-timings.rst: document interlaced definesHans Verkuil
Document V4L2_DV_PROGRESSIVE and V4L2_DV_INTERLACED and fix missing references. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12nvme-loop: fix nvme-loop Kconfig dependenciesArnd Bergmann
I ran into the same problem on NVME_TARGET_RDMA now, which otherwise needs dependencies on both CONFIG_BLOCK and CONFIGFS_FS: warning: (NVME_TARGET_LOOP && NVME_TARGET_RDMA) selects NVME_TARGET which has unmet direct dependencies (BLOCK && CONFIGFS_FS) 0xA002B368 Mon Jul 11 18:00:45 CEST 2016 failed In file included from ../drivers/nvme/target/core.c:16:0: drivers/nvme/target/nvmet.h:222:14: error: field 'inline_bio' has incomplete type struct bio inline_bio; ^~~~~~~~~~ drivers/nvme/target/core.c: In function 'nvmet_async_event_work': drivers/nvme/target/core.c:98:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] kfree(aen); ^~~~~ ../drivers/nvme/target/core.c: In function 'nvmet_ns_enable': ../drivers/nvme/target/core.c:269:13: error: implicit declaration of function 'blkdev_get_by_path' [-Werror=implicit-function-declaration] ns->bdev = blkdev_get_by_path(ns->device_path, FMODE_READ | FMODE_WRITE, Folding in my patch below should address that too. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12nvmet: fix return value check in nvmet_subsys_alloc()Wei Yongjun
In case of error, the function kstrndup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12clocksource/drivers/time-armada-370-xp: Fix return value checkAnna-Maria Gleixner
The failure check of armada_370_xp_timer_setup() in armada_370_xp_timer_common_init() is negated. This leads to an error message and exit in case of a successful initialization. Remove the stray '!'. Fixes: 12549e27c63c ("clocksource/drivers/time-armada-370-xp: Convert init function to return error") Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607121731020.1344@hypnos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-12nvme-fabrics: add-remove ctrl repeat fixMing Lin
Repeatedly adding then removing the same NVMe-over-Fabrics controller over and over again (shown below) can cause a kernel crash (also shown below). This patch fixes that. [nvmf]# ./setup_nvme_connections.sh traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside -nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=lightside -nqn,hostnqn=good-wins-nqn > /dev/nvme-fabrics [nvmf]# ./remove_nvme_connections.sh 2 echo 1 > /sys/class/nvme/nvme0/delete_controller echo 1 > /sys/class/nvme/nvme1/delete_controller [nvmf]# ./setup_nvme_connections.sh traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside -nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics Killed [nvmf]# dmesg [ 313.416908] nvme nvme0: creating 16 I/O queues. [ 313.523908] nvme nvme0: new ctrl: NQN "darkside-nqn", addr 192.168.1.100:4420 [ 313.524857] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 313.525262] IP: [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.525490] PGD 0 [ 313.525726] Oops: 0000 [#1] SMP [ 313.525900] Modules linked in: nvme_rdma nvme_fabrics nvme_core ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_en mlx4_ib ib_core mlx4_core [ 313.527085] CPU: 15 PID: 5856 Comm: setup_nvme_conn Not tainted 4.7.0-rc2+ #2 [ 313.527259] Hardware name: Supermicro X9DRT-F/IBQF/IBFF/X9DRT -F/IBQF/IBFF, BIOS 1.0a 10/09/2012 [ 313.527551] task: ffff88027646cd40 ti: ffff88025b980000 task.ti: ffff88025b980000 [ 313.527879] RIP: 0010:[<ffffffff8136c60e>] [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.528232] RSP: 0018:ffff88025b983db0 EFLAGS: 00010206 [ 313.528403] RAX: 0000000000000000 RBX: ffff880471879880 RCX: fffffffffffffff1 [ 313.528594] RDX: 0000000000000000 RSI: ffff880474afa860 RDI: 0000000000000011 [ 313.528778] RBP: ffff88025b983db0 R08: ffff880474afa860 R09: ffff880471879058 [ 313.528956] R10: 000000000000002c R11: ffff88047f415000 R12: ffff880471879800 [ 313.529129] R13: ffff880471879000 R14: ffff880474afa860 R15: fffffffffffffff8 [ 313.529303] FS: 00007f778f510700(0000) GS:ffff88047fbc0000(0000) knlGS:0000000000000000 [ 313.529629] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 313.529817] CR2: 0000000000000010 CR3: 0000000274174000 CR4: 00000000000406e0 [ 313.529989] Stack: [ 313.530154] ffff88025b983e48 ffffffffa0171c74 0000000000000001 0000000000000059 [ 313.530621] ffff880476f32400 ffff88047e8add80 0000010074b33aa0 ffff880471879059 [ 313.531162] ffff88047187904b ffff880471879058 0000000000000000 ffff88047736e000 [ 313.531629] Call Trace: [ 313.531797] [<ffffffffa0171c74>] nvmf_dev_write+0x674/0x840 [nvme_fabrics] [ 313.531974] [<ffffffff81180b53>] __vfs_write+0x23/0x120 [ 313.532146] [<ffffffff8119daff>] ? __fd_install+0x1f/0xc0 [ 313.532316] [<ffffffff8119d97a>] ? __alloc_fd+0x3a/0x170 [ 313.532487] [<ffffffff811811f3>] vfs_write+0xb3/0x1b0 [ 313.532658] [<ffffffff8117e321>] ? filp_close+0x51/0x70 [ 313.532845] [<ffffffff811824e1>] SyS_write+0x41/0xa0 [ 313.533016] [<ffffffff8183055b>] entry_SYSCALL_64_fastpath+0x13/0x8f [ 313.533188] Code: 80 3a 00 75 f7 48 83 c6 01 0f b6 4e ff 48 83 c2 01 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 83 c7 01 <0f> b6 47 ff 48 83 c6 01 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 [ 313.536563] RIP [<ffffffff8136c60e>] strcmp+0xe/0x30 [ 313.536815] RSP <ffff88025b983db0> [ 313.536981] CR2: 0000000000000010 [ 313.537151] ---[ end trace 3d952e590e7bc2d5 ]--- Reported-and-tested-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <mlin@kernel.org> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12nvme-fabrics: Remove tl_retry_countSagi Grimberg
The timeout before error recovery logic kicks in is dictated by the nvme keep-alive, so we don't really need a transport layer retry count. transports can retry for as much as they like. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12[media] pixfmt-006.rst: add missing V4L2_YCBCR_ENC_SMPTE240MHans Verkuil
Fix missing documentation, and its cross reference. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12nvme-rdma: Don't use tl_retry_countSagi Grimberg
Always use the maximum qp retry count as the error recovery timeout is dictated from the nvme keep-alive. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12nvme-rdma: fix the return value of nvme_rdma_reinit_request()Wei Yongjun
PTR_ERR should be applied before its argument is reassigned, otherwise the return value will be set to 0, not error code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12cdrom: support read sub-channel command in LBA formatvchannaiah
userspace application can send READ_SUB_CHANNEL command with time bit enabled and disabled. The time bit allows selection of address reporting format. If the time bit is disabled the response is in logical block address(CDROM_LBA) format, represented as a 32-bit integer with ms-byte first. If the time bit is enabled the response is in time format i.e., minutes, second, frame (CDROM_MSF) format. Signed-off-by: vchannaiah <vanitha.channaiah@in.bosch.com> Signed-off-by: Mahendran Kuppusamy <mahendran.kuppusamy@in.bosch.com> [veeraiyan.chidambaram@in.bosch.com: updated Documentation/ioctl/cdrom.txt] Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12nvme/quirk: Add a delay before checking for adapter readinessGuilherme G. Piccoli
When disabling the controller, the specification says the register NVME_REG_CC should be written and then driver needs to wait the adapter to be ready, which is checked by reading another register bit (NVME_CSTS_RDY). There's a timeout validation in this checking, so in case this timeout is reached the driver gives up and removes the adapter from the system. After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003) (HGST adapter) end up being removed if we issue a reset_controller, because driver keeps verifying the NVME_REG_CSTS until the timeout is reached. This patch adds a necessary quirk for this adapter, by introducing a delay before nvme_wait_ready(), so the reset procedure is able to be completed. This quirk is needed because just increasing the timeout is not enough in case of this adapter - the driver must wait before start reading NVME_REG_CSTS register on this specific device. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12arm64: cpuinfo: Expose MIDR_EL1 and REVIDR_EL1 to sysfsSteve Capper
It can be useful for JIT software to be aware of MIDR_EL1 and REVIDR_EL1 to ascertain the presence of any core errata that could affect code generation. This patch exposes these registers through sysfs: /sys/devices/system/cpu/cpu$ID/regs/identification/midr_el1 /sys/devices/system/cpu/cpu$ID/regs/identification/revidr_el1 where $ID is the cpu number. For big.LITTLE systems, one can have a mixture of cores (e.g. Cortex A53 and Cortex A57), thus all CPUs need to be enumerated. If the kernel does not have valid information to populate these entries with, an empty string is returned to userspace. Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Steve Capper <steve.capper@linaro.org> [suzuki.poulose@arm.com: ABI documentation updates, hotplug notifiers, kobject changes] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-12arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSOKevin Brodsky
So far the arm64 clock_gettime() vDSO implementation only supported the following clocks, falling back to the syscall for the others: - CLOCK_REALTIME{,_COARSE} - CLOCK_MONOTONIC{,_COARSE} This patch adds support for the CLOCK_MONOTONIC_RAW clock, taking advantage of the recent refactoring of the vDSO time functions. Like the non-_COARSE clocks, this only works when the "arch_sys_counter" clocksource is in use (allowing us to read the current time from the virtual counter register), otherwise we also have to fall back to the syscall. Most of the data is shared with CLOCK_MONOTONIC, and the algorithm is similar. The reference implementation in kernel/time/timekeeping.c shows that: - CLOCK_MONOTONIC = tk->wall_to_monotonic + tk->xtime_sec + timekeeping_get_ns(&tk->tkr_mono) - CLOCK_MONOTONIC_RAW = tk->raw_time + timekeeping_get_ns(&tk->tkr_raw) - tkr_mono and tkr_raw are identical (in particular, same clocksource), except these members: * mult (only mono's multiplier is NTP-adjusted) * xtime_nsec (always 0 for raw) Therefore, tk->raw_time and tkr_raw->mult are now also stored in the vDSO data page. Cc: Ali Saidi <ali.saidi@arm.com> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-12arm64: Refactor vDSO time functionsKevin Brodsky
Time functions are directly implemented in assembly in arm64, and it is desirable to keep it this way for performance reasons (everything fits in registers, so that the stack is not used at all). However, the current implementation is quite difficult to read and understand (even considering it's assembly). Additionally, due to the structure of __kernel_clock_gettime, which heavily uses conditional branches to share code between the different clocks, it is difficult to support a new clock without making the branches even harder to follow. This commit completely refactors the structure of clock_gettime (and gettimeofday along the way) while keeping exactly the same algorithms. We no longer try to share code; instead, macros provide common operations. This new approach comes with a number of advantages: - In clock_gettime, clock implementations are no longer interspersed, making them much more readable. Additionally, macros only use registers passed as arguments or reserved with .req, this way it is easy to make sure that registers are properly allocated. To avoid a large number of branches in a given execution path, a jump table is used; a normal execution uses 3 unconditional branches. - __do_get_tspec has been replaced with 2 macros (get_ts_clock_mono, get_clock_shifted_nsec) and explicit loading of data from the vDSO page. Consequently, clock_gettime and gettimeofday are now leaf functions, and saving x30 (lr) is no longer necessary. - Variables protected by tb_seq_count are now loaded all at once, allowing to merge the seqcnt_read macro into seqcnt_check. - For CLOCK_REALTIME_COARSE, removed an unused load of the wall to monotonic timespec. - For CLOCK_MONOTONIC_COARSE, removed a few shift instructions. Obviously, the downside of sharing less code is an increase in code size. However since the vDSO has its own code page, this does not really matter, as long as the size of the DSO remains below 4 kB. For now this should be all right: Before After vdso.so size (B) 2776 3000 Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-12ata: hpt366: fix incorrect mask when checking at cmd_high_timeColin Ian King
According to the HPT366 data sheet, PCI config space dword 0x40-0x43 bits 11:8 specify the primary drive cmd_high_time, however, currently just 3 bits of the 4 are being used because the mask is 0x700 and not 0x0f00. Fix the mask, allowing for the 40MHz clock to be detected. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: correct SPC version descriptorTom Yan
The comment suggests we should be having an SPC-3 version descriptor but the 0260h is the code for "SPC-2 (no version claimed)". Correct it to 0300h so that it has the "SPC-3 (no version claimed)" descriptor. Note that we are claiming SPC-3 version compatibility in the VERSION field of the standard INQUIRY data. Therefore, I assume the typo was on the code but not on the comment. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: set CmdQue bit in standard INQUIRY data to 1Tom Yan
Avoid performance bottleneck when being SCSI pass-through'd to virtual machines with other OSes (e.g. Windows) via virtio-scsi and scsi-block in qemu. Ref.: https://github.com/YanVugenfirer/kvm-guest-drivers-windows/issues/63 Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12libata-scsi: fix SET FEATURES "filtering" for ata_msense_caching()Tom Yan
Without this fix, the DRA bit of the caching mode page would not be updated when the read look-ahead feature is toggled (e.g. with `smartctl --set`), but will only be until, for example, the write cache feature is touched. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12[media] doc-rst: fix a missing reference for V4L2_BUF_FLAG_LASTMauro Carvalho Chehab
Fix it by adding a header to the flat-table to match to the list of define symbols. As a side-effect, it also removes some exceptions from videodev2.h.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12libata-scsi: set correct VERSION field for ZAC devicesTom Yan
Commit 856c46639309 ("libata: support device-managed ZAC devices") had the line that "bumps" the VERSION field in standard INQUIRY data removed. Add it back and claim SPC-5 version compatibility, which matches with the current version descriptor "SPC-5 (no version claimed)" that is used for ZAC devices. Signed-off-by: Tom Yan <tom.ty89@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12i40iw: Enable remote access rights for stag allocationShiraz Saleem
Fix to enable remote access rights when allocating stag. Fixes: b7aee855d3b9 ("RDMA/i40iw: Add base memory management extensions") Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12i40iw: do not print unitialized variables in error messageNicolas Iooss
i40iw_create_cqp() printed the contents of variables maj_err and min_err in an error message before they could be initialized (by calling dev->cqp_ops->cqp_create). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB core: Add port_xmit_wait counterChristoph Lameter
Add the missing port_xmit_wait counter. This counter is displayed through some tools like perfquery but is not available via sysfs. For the PORT_PMA_ATTR macro the _counter field is set to zero allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT See also the earlier work in 2008 by Vladimir Skolovsky https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.html Signed-off-by: Vladimir Sokolvsky <vlad@mellanox.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB/hfi1: Fix sleep inside atomic issue in init_asic_dataTadeusz Struk
The critical section should protect only the list traversal and dd->asic_data modification, not the memory allocation. The fix pulls the allocation out of the critical section. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB/hfi1: Correct issues with sc5 computationMike Marciniszyn
There are several computatations of the sc in the ud receive routine. Besides the code duplication, all are wrong when the sc is greater than 15. In that case the code incorrectly or's a 1 into the computed sc instead of 1 shifted left by 4. Fix precomputed sc5 by using an already implemented routine hdr2sc() and deleting flawed duplicated code. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12netfilter: conntrack: skip clash resolution if nat is in placePablo Neira Ayuso
The clash resolution is not easy to apply if the NAT table is registered. Even if no NAT rules are installed, the nul-binding ensures that a unique tuple is used, thus, the packet that loses race gets a different source port number, as described by: http://marc.info/?l=netfilter-devel&m=146818011604484&w=2 Clash resolution with NAT is also problematic if addresses/port range ports are used since the conntrack that wins race may describe a different mangling that we may have earlier applied to the packet via nf_nat_setup_info(). Fixes: 71d8c47fc653 ("netfilter: conntrack: introduce clash resolution on insertion race") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
2016-07-12netfilter: conntrack: protect early_drop by rcu read lockLiping Zhang
User can add ct entry via nfnetlink(IPCTNL_MSG_CT_NEW), and if the total number reach the nf_conntrack_max, we will try to drop some ct entries. But in this case(the main function call path is ctnetlink_create_conntrack -> nf_conntrack_alloc -> early_drop), rcu_read_lock is not held, so race with hash resize will happen. Fixes: 242922a02717 ("netfilter: conntrack: simplify early_drop") Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-12[media] v4l2-subdev.h: remove the control subdev opsHans Verkuil
These are no longer used (finally!), so remove them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] media/i2c: drop the last users of the ctrl core opsHans Verkuil
Nobody is using these ops anymore, so remove these callbacks from the subdev drivers that still have them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] ivtv: use v4l2_g/s_ctrl instead of the g/s_ctrl opsHans Verkuil
These ops are deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] cx18: use v4l2_g/s_ctrl instead of the g/s_ctrl opsHans Verkuil
These ops are deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] v4l2-flash-led: remove unused opsHans Verkuil
These ops are deprecated and should not be used anymore (and in fact they are not used at all). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] cx88: use wm8775_s_ctrl instead of the s_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] cx231xx: use v4l2_s_ctrl instead of the s_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] via-camera: use v4l2_s_ctrl instead of the s_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] mcam-core: use v4l2_s_ctrl instead of the s_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] usbvision: use v4l2_ctrl_g_ctrl instead of the g_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] pvrusb2: use v4l2_s_ctrl instead of the s_ctrl opHans Verkuil
This op is deprecated and should not be used anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] davinci: drop unused control callbacksHans Verkuil
These callbacks are no longer used since the davinci drivers use the control framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] saa7164: drop unused saa7164_ctrl structHans Verkuil
No longer used, can be removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] omap_vout: use control frameworkHans Verkuil
Replace the old control code with the control framework. This is one of the few remaining drivers that was not using this framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: reorganize LIRC ReST filesMauro Carvalho Chehab
Reorganize the LIRC rst files, using "-" instead of "_" on their names, and creating a separate chapter for syscalls. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: document LIRC set mode ioctlsMauro Carvalho Chehab
Add LIRC_SET_[REC|SEND]_MODE ioctls to the corresponding GET functions, and put all LIRC modes altogether. As now everything is already documented on its own ioctl pages, get rid of lirc_ioctl.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: document LIRC_SET_WIDEBAND_RECEIVERMauro Carvalho Chehab
Put documentation for this ioctl on a separate page and improve it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: add documentation for LIRC_SET_MEASURE_CARRIER_MODEMauro Carvalho Chehab
Place documentation for this ioctl on its own page. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: document LIRC_SET_REC_TIMEOUT_REPORTSMauro Carvalho Chehab
Add a separate page for this ioctl and improve its documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] doc-rst: document LIRC_SET_REC_TIMEOUTMauro Carvalho Chehab
Add a separate page for this ioctl and adds the cross-references. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-09-21 18:00:27 +0000