summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-05stmmac: fix atomicity in pm routinesGiuseppe CAVALLARO
This patch is to fix the atomicity when suspend and resume the driver. The clk api have been changed (as reported by Hao Liang) and the skb allocation is done out of the hw setup function and taking care about the GFP flags. Reported-by: Hao Liang <hliang1025@gmail.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Hao Liang <hliang1025@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix concurrency in eee initialization.Giuseppe CAVALLARO
This patch aims to fix the concurrency in eee initialization inside the stmmac driver and related warnings when enable DEBUG_ATOMIC_SLEEP. Prior this patch, the stmmac_eee_init could be called in several places as shown below: stmmac_open stmmac_resume PHY Layer | | | stmmac_hw_setup stmmac_adjust_link | | stmmac ethtool |__________________________|______________| | stmmac_eee_init The patch removes the stmmac_eee_init call inside the stmmac_hw_setup that is unnecessary. It is sufficient to call it in the adjust_link to always guarantee that EEE is always configured at mac level too. Fixing the lock protection now it is covered another case (not considered before). The stmmac_eee_init could be called by the ethtool so critical sections must be protected inside this function too. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix lock in stmmac_set_rx_modeGiuseppe CAVALLARO
When compile with CONFIG_PROVE_LOCKING the following warnings happen: [snip] HARDIRQ-ON-W at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c so the patch just removes the lock protection in the stmmac_set_rx_mode Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Emilio Lopez <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: release tx lock, in case of dma mapping error.Fabrice Gasnier
Add missing spin_unlock when tx frames gets dropped. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05stmmac: fix stmmac_tx_avail should be called with TX lockedFabrice Gasnier
stmmac_tx_avail() may lie if used unprotected. It's using cur_tx and dirty_tx index. These index may be already in use by tx_clean when entering xmit routine. So, this should be called locked. This can cause transmit queue to be stuck, with following message: NETDEV WATCHDOG: eth0 (stmmaceth): transmit queue 0 timed out Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05drivers: net: ethernet: xilinx: xilinx_emaclite: revert the original commit ↵Chen Gang
"1db3ddff1602edf2390b7667dcbaa0f71512e3ea" Microblaze is a fpga soft core, it can be customized easily, which may cause many various hardware version strings. So the original fix patch based on hard-coded compatible version strings is not a good idea (although it is correct for current issue). For it, there will be a new solving way soon (which based on the device tree). The original issue is related with qemu, so can only change the hardware version string in qemu for it, then keep the original driver no touch ( qemu is for virtualization which has much easier life than real world). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05include/linux/socket.h: Fix commentRasmus Villemoes
File descriptors are always closed on exit :-) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Add missing descriptions for fwmark_reflect for ipv4 and ipv6.Loganaden Velvindron
It was initially sent by Lorenzo Colitti, but was subsequently lost in the final diff he submitted. Signed-off-by: Loganaden Velvindron <logan@elandsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05fix breakage in o2net_send_tcp_msg()Al Viro
uninitialized msghdr. Broken in "ocfs2: don't open-code kernel_recvmsg()" by me ;-/ Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro: "Another overlayfs fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ovl: don't poison cursor
2014-11-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "One small improvement for the cputime accounting, two bug fixes and an update for the default configuration files" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ftrace: add ftrace_graph_is_dead() check s390: update default configuration s390/vdso: fix stack corruption s390/time: use stck clock fast for do_account_vtime
2014-11-05PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()Yinghai Lu
acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device (either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus. But SR-IOV virtual functions can be on a virtual bus with no bridge leading to it. Return a NULL acpi_handle in this case instead of trying to dereference the NULL pointer to the bridge. This fixes a NULL pointer dereference oops in pci_get_hp_params() when adding SR-IOV VF devices on virtual buses. [bhelgaas: changelog, add comment in code] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591 Reported-by: Chao Zhou <chao.zhou@intel.com> Reported-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-05geneve: Unregister pernet subsys on module unload.Jesse Gross
The pernet ops aren't ever unregistered, which causes a memory leak and an OOPs if the module is ever reinserted. Fixes: 0b5e8b8eeae4 ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05geneve: Set GSO type on transmit.Jesse Gross
Geneve does not currently set the inner protocol type when transmitting packets. This causes GSO segmentation to fail on NICs that do not support Geneve offloading. CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05cpufreq: cpufreq-dt: Fix arguments in clock failure error messageAbhilash Kesavan
Fix the swapped arguments in the clock failure dev_err. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-05USB: storage: Fix timeout in usb_stor_euscsi_init() and ↵Mark Knibbs
usb_stor_huawei_e220_init() The timeout argument to usb_stor_control_msg() is specified in jiffies, not milliseconds. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05Merge tag 'iio-fixes-for-3.18b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of IIO fixes for the 3.18 cycle. * tsl4531 - fix a compile error when CONFIG_PM_OPS not set. * kxcjk-1013 - event spec direction was invalid - leading to 'interesting' attrribute names. * as3935 - sizeof(st) used instead of sizeof(*st) leading to allocation of space for a pointer rather than the structure desired. * ade7758 - Another null pointer deref fix due to different channels being provided to the the buffer register than used for the sysfs side of things. * ade7758 - Check there is a channel enabled in preenable for the buffer before doing anything. * ade7758 - Drop a stray raw from the channel name that leads to _raw_raw postfix.
2014-11-05USB: cdc-acm: only raise DTR on transitions from B0Johan Hovold
Make sure to only raise DTR on transitions from B0 in set_termios. Also allow set_termios to be called from open with a termios_old of NULL. Note that DTR will not be raised prematurely in this case. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05Revert "storage: Replace magic number with define in usb_stor_euscsi_init()"Greg Kroah-Hartman
This reverts commit bda9893c50fb56253d3c206c14e3f933e5f68b3c as it was incorrect. Reported-by: Mark Knibbs <markk@clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05ARM: dts: vf610: add SD node to cosmic dtsOlof Johansson
Driver has been there since a while back, but the dts never seems to have been updated with the node (nor pinctrl). Do so now. Cc: Matt Porter <mporter@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-05staging:iio:ade7758: Remove "raw" from channel nameLars-Peter Clausen
"raw" is a property of a channel, but should not be part of the name of channel. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05staging:iio:ade7758: Fix check if channels are enabled in prenableLars-Peter Clausen
We should check if a channel is enabled, not if no channels are enabled. Fixes: 550268ca1111 ("staging:iio: scrap scan_count and ensure all drivers use active_scan_mask") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05staging:iio:ade7758: Fix NULL pointer deref when enabling bufferLars-Peter Clausen
In older versions of the IIO framework it was possible to pass a completely different set of channels to iio_buffer_register() as the one that is assigned to the IIO device. Commit 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") introduced a restriction that requires that the set of channels that is passed to iio_buffer_register() is a subset of the channels assigned to the IIO device as the IIO core will use the list of channels that is assigned to the device to lookup a channel by scan index in iio_compute_scan_bytes(). If it can not find the channel the function will crash. This patch fixes the issue by making sure that the same set of channels is assigned to the IIO device and passed to iio_buffer_register(). Note that we need to remove the IIO_CHAN_INFO_RAW and IIO_CHAN_INFO_SCALE info attributes from the channels since we don't actually want those to be registered. Fixes the following crash: Unable to handle kernel NULL pointer dereference at virtual address 00000016 pgd = d2094000 [00000016] *pgd=16e39831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1695 Comm: bash Not tainted 3.17.0-06329-g29461ee #9686 task: d7768040 ti: d5bd4000 task.ti: d5bd4000 PC is at iio_compute_scan_bytes+0x38/0xc0 LR is at iio_compute_scan_bytes+0x34/0xc0 pc : [<c0316de8>] lr : [<c0316de4>] psr: 60070013 sp : d5bd5ec0 ip : 00000000 fp : 00000000 r10: d769f934 r9 : 00000000 r8 : 00000001 r7 : 00000000 r6 : c8fc6240 r5 : d769f800 r4 : 00000000 r3 : d769f800 r2 : 00000000 r1 : ffffffff r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 18c5387d Table: 1209404a DAC: 00000015 Process bash (pid: 1695, stack limit = 0xd5bd4240) Stack: (0xd5bd5ec0 to 0xd5bd6000) 5ec0: d769f800 d7435640 c8fc6240 d769f984 00000000 c03175a4 d7435690 d7435640 5ee0: d769f990 00000002 00000000 d769f800 d5bd4000 00000000 000b43a8 c03177f4 5f00: d769f810 0162b8c8 00000002 c8fc7e00 d77f1d08 d77f1da8 c8fc7e00 c01faf1c 5f20: 00000002 c010694c c010690c d5bd5f88 00000002 c8fc6840 c8fc684c c0105e08 5f40: 00000000 00000000 d20d1580 00000002 000af408 d5bd5f88 c000de84 c00b76d4 5f60: d20d1580 000af408 00000002 d20d1580 d20d1580 00000002 000af408 c000de84 5f80: 00000000 c00b7a44 00000000 00000000 00000002 b6ebea78 00000002 000af408 5fa0: 00000004 c000dd00 b6ebea78 00000002 00000001 000af408 00000002 00000000 5fc0: b6ebea78 00000002 000af408 00000004 bee96a4c 000a6094 00000000 000b43a8 5fe0: 00000000 bee969cc b6e2eb77 b6e6525c 40070010 00000001 00000000 00000000 [<c0316de8>] (iio_compute_scan_bytes) from [<c03175a4>] (__iio_update_buffers+0x248/0x438) [<c03175a4>] (__iio_update_buffers) from [<c03177f4>] (iio_buffer_store_enable+0x60/0x7c) [<c03177f4>] (iio_buffer_store_enable) from [<c01faf1c>] (dev_attr_store+0x18/0x24) [<c01faf1c>] (dev_attr_store) from [<c010694c>] (sysfs_kf_write+0x40/0x4c) [<c010694c>] (sysfs_kf_write) from [<c0105e08>] (kernfs_fop_write+0x110/0x154) [<c0105e08>] (kernfs_fop_write) from [<c00b76d4>] (vfs_write+0xbc/0x170) [<c00b76d4>] (vfs_write) from [<c00b7a44>] (SyS_write+0x40/0x78) [<c00b7a44>] (SyS_write) from [<c000dd00>] (ret_fast_syscall+0x0/0x30) Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05iio: as3935: allocate correct iio_device sizeGeorge McCollister
Signed-off-by: George McCollister <george.mccollister@gmail.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05io: accel: kxcjk-1013: Fix iio_event_spec directionDaniel Baluta
Because IIO_EV_DIR_* are not bitmasks but enums, IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING is not equal with IIO_EV_DIR_EITHER. This could lead to potential misformatted sysfs attributes like: * in_accel_x_thresh_(null)_en * in_accel_x_thresh_(null)_period * in_accel_x_thresh_(null)_value or even memory corruption. Fixes: b4b491c083 (iio: accel: kxcjk-1013: Support threshold) Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not definedDan Murphy
Fix the compiler error when the CONFIG_PM_OPS flag is not set. drivers/iio/light/tsl4531.c:235:8: error: ‘tsl4531_suspend’ undeclared here (not in a function) drivers/iio/light/tsl4531.c:235:8: error: ‘tsl4531_resume’ undeclared here (not in a function) Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05iio: adc: mxs-lradc: Disable the clock on probe failureFabio Estevam
We should disable lradc->clk in the case of errors in the probe function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: <Stable@vger.kernel.org>
2014-11-05iio: st_sensors: Fix buffer copyRobin van der Gracht
Use byte_for_channel as iterator to properly initialize the buffer. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: <Stable@vger.kernel.org>
2014-11-05staging:iio:ad5933: Drop "raw" from channel namesLars-Peter Clausen
"raw" is the name of a channel property, but should not be part of the channel name itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05staging:iio:ad5933: Fix NULL pointer deref when enabling bufferLars-Peter Clausen
In older versions of the IIO framework it was possible to pass a completely different set of channels to iio_buffer_register() as the one that is assigned to the IIO device. Commit 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") introduced a restriction that requires that the set of channels that is passed to iio_buffer_register() is a subset of the channels assigned to the IIO device as the IIO core will use the list of channels that is assigned to the device to lookup a channel by scan index in iio_compute_scan_bytes(). If it can not find the channel the function will crash. This patch fixes the issue by making sure that the same set of channels is assigned to the IIO device and passed to iio_buffer_register(). Fixes the follow NULL pointer derefernce kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 00000016 pgd = d53d0000 [00000016] *pgd=1534e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1626 Comm: bash Not tainted 3.15.0-19969-g2a180eb-dirty #9545 task: d6c124c0 ti: d539a000 task.ti: d539a000 PC is at iio_compute_scan_bytes+0x34/0xa8 LR is at iio_compute_scan_bytes+0x34/0xa8 pc : [<c03052e4>] lr : [<c03052e4>] psr: 60070013 sp : d539beb8 ip : 00000001 fp : 00000000 r10: 00000002 r9 : 00000000 r8 : 00000001 r7 : 00000000 r6 : d6dc8800 r5 : d7571000 r4 : 00000002 r3 : d7571000 r2 : 00000044 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 18c5387d Table: 153d004a DAC: 00000015 Process bash (pid: 1626, stack limit = 0xd539a240) Stack: (0xd539beb8 to 0xd539c000) bea0: c02fc0e4 d7571000 bec0: d76c1640 d6dc8800 d757117c 00000000 d757112c c0305b04 d76c1690 d76c1640 bee0: d7571188 00000002 00000000 d7571000 d539a000 00000000 000dd1c8 c0305d54 bf00: d7571010 0160b868 00000002 c69d3900 d7573278 d7573308 c69d3900 c01ece90 bf20: 00000002 c0103fac c0103f6c d539bf88 00000002 c69d3b00 c69d3b0c c0103468 bf40: 00000000 00000000 d7694a00 00000002 000af408 d539bf88 c000dd84 c00b2f94 bf60: d7694a00 000af408 00000002 d7694a00 d7694a00 00000002 000af408 c000dd84 bf80: 00000000 c00b32d0 00000000 00000000 00000002 b6f1aa78 00000002 000af408 bfa0: 00000004 c000dc00 b6f1aa78 00000002 00000001 000af408 00000002 00000000 bfc0: b6f1aa78 00000002 000af408 00000004 be806a4c 000a6094 00000000 000dd1c8 bfe0: 00000000 be8069cc b6e8ab77 b6ec125c 40070010 00000001 22940489 154a5007 [<c03052e4>] (iio_compute_scan_bytes) from [<c0305b04>] (__iio_update_buffers+0x248/0x438) [<c0305b04>] (__iio_update_buffers) from [<c0305d54>] (iio_buffer_store_enable+0x60/0x7c) [<c0305d54>] (iio_buffer_store_enable) from [<c01ece90>] (dev_attr_store+0x18/0x24) [<c01ece90>] (dev_attr_store) from [<c0103fac>] (sysfs_kf_write+0x40/0x4c) [<c0103fac>] (sysfs_kf_write) from [<c0103468>] (kernfs_fop_write+0x110/0x154) [<c0103468>] (kernfs_fop_write) from [<c00b2f94>] (vfs_write+0xd0/0x160) [<c00b2f94>] (vfs_write) from [<c00b32d0>] (SyS_write+0x40/0x78) [<c00b32d0>] (SyS_write) from [<c000dc00>] (ret_fast_syscall+0x0/0x30) Code: ea00000e e1a01008 e1a00005 ebfff6fc (e5d0a016) Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05ASoC: samsung: Add MODULE_DEVICE_TABLE for SnowAndreas Färber
This enables the snd_soc_snow module to be auto-loaded. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-05arm64: defconfig: update defconfig for 3.18Will Deacon
This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-05x86, microcode: Fix accessing dis_ucode_ldr on 32-bitBorislav Petkov
We should be accessing it through a pointer, like on the BSP. Tested-by: Richard Hendershot <rshendershot@mchsi.com> Fixes: 65cef1311d5d ("x86, microcode: Add a disable chicken bit") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05arm64: compat: Enable bpf syscallCatalin Marinas
Following the arm32 commit 2d605a302972 (ARM: enable bpf syscall), wire this syscall for arm64 compat as well. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-05Merge remote-tracking branches 'regulator/fix/max1586', ↵Mark Brown
'regulator/fix/max77686', 'regulator/fix/max77693', 'regulator/fix/max77802', 'regulator/fix/max8860' and 'regulator/fix/s2mpa01' into regulator-linus
2014-11-05Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2014-11-05ALSA: usb-audio: Fix device_del() sysfs warnings at disconnectTakashi Iwai
Some USB-audio devices show weird sysfs warnings at disconnecting the devices, e.g. usb 1-3: USB disconnect, device number 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180() sysfs group ffffffff8183df40 not found for kobject 'midiC1D0' Call Trace: [<ffffffff814a3e38>] ? dump_stack+0x49/0x71 [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0 [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff813521e9>] ? device_del+0x39/0x180 [<ffffffff81352339>] ? device_unregister+0x9/0x20 [<ffffffff81352384>] ? device_destroy+0x34/0x40 [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd] [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi] [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd] [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd] [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd] [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio] [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore] [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0 [<ffffffff81355485>] ? device_release_driver+0x25/0x40 [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130 [<ffffffff813522b9>] ? device_del+0x109/0x180 [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore] [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore] [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore] [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80 [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0 [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0 [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffff8105973e>] ? kthread+0xce/0xf0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 ---[ end trace 40b1928d1136b91e ]--- This comes from the fact that usb-audio driver may receive the disconnect callback multiple times, per each usb interface. When a device has both audio and midi interfaces, it gets called twice, and currently the driver tries to release resources at the last call. At this point, the first parent interface has been already deleted, thus deleting a child of the first parent hits such a warning. For fixing this problem, we need to call snd_card_disconnect() and cancel pending operations at the very first disconnect while the release of the whole objects waits until the last disconnect call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931 Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com> Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05ovl: don't poison cursorMiklos Szeredi
ovl_cache_put() can be called from ovl_dir_reset() if the cache needs to be rebuilt. We did list_del() on the cursor, which results in an Oops on the poisoned pointer in ovl_seek_cursor(). Reported-by: Jordi Pujol Palomer <jordipujolp@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Jordi Pujol Palomer <jordipujolp@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-05KVM: x86: Fix uninitialized op->type for some immediate valuesNadav Amit
The emulator could reuse an op->type from a previous instruction for some immediate values. If it mistakenly considers the operands as memory operands, it will performs a memory read and overwrite op->val. Consider for instance the ROR instruction - src2 (the number of times) would be read from memory instead of being used as immediate. Mark every immediate operand as such to avoid this problem. Cc: stable@vger.kernel.org Fixes: c44b4c6ab80eef3a9c52c7b3f0c632942e6489aa Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-05mmc: core: fix card detection regressionKristina Martsenko
Since commit 89168b489915 ("mmc: core: restore detect line inversion semantics"), the SD card on i.MX28 (and possibly other) devices isn't detected and booting stops at: [ 4.120617] Waiting for root device /dev/mmcblk0p3... This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly when the host controller doesn't use a GPIO for card detection (but instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will return before assigning to the gpio_invert variable, leaving the variable uninitialized. The variable then gets used to set the flag. This patch fixes the issue by making sure gpio_invert is set to false when a GPIO isn't used. After this patch, i.MX28 boots fine. The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly for the exact same reason (it uses the same uninitialized variable), so this patch fixes that too. Fixes: 89168b489915 ("mmc: core: restore detect line inversion semantics") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-05ALSA: hda - fix mute led problem for three HP laptopsHui Wang
Without the fix, the mute led can't work on these three machines. After apply this fix, these three machines will fall back on the led control quirk as below, and through testing, the mute led works very well. PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED, ALC282_STANDARD_PINS, {0x12, 0x90a60140}, ... BugLink: https://bugs.launchpad.net/bugs/1389497 Tested-by: TieFu Chen <tienfu.chen@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04MAINTAINERS: update bcm2835 entryStephen Warren
Add Lee Jones as a new co-maintainer. The kernel.org repo moved to allow us both to push to it. Update MAINTAINERS to match. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-04Merge tag 'imx-fixes-3.18-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18, 2nd round" from Shawn Guo: "This is the second round of i.MX fixes for 3.18. The clk-vf610 fix is relatively big, because it needs some adaption to the change made by offending commit dc4805c2e78b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver). And it should have been sent to you for earlier -rc inclusion, but unfortunately it got delayed for some time because Stefan wasn't aware of my email address change." The i.MX fixes for 3.18, 2nd round: - Fix a regression on Vybrid platform which is caused by commit dc4805c2e78b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver), and results in a missing configuration on PLL clocks. - Fix a regression with i.MX defconfig files where CONFIG_SPI option gets lost accidentally. * tag 'imx-fixes-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (460 commits) ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree + Linux 3.18-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-04Revert "NFS: nfs4_do_open should add negative results to the dcache."Trond Myklebust
This reverts commit 4fa2c54b5198d09607a534e2fd436581064587ed.
2014-11-04Revert "NFS: remove BUG possibility in nfs4_open_and_get_state"Trond Myklebust
This reverts commit f39c01047994e66e7f3d89ddb4c6141f23349d8d.
2014-11-04NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENTTrond Myklebust
If the OPEN rpc call to the server fails with an ENOENT call, nfs_atomic_open will create a negative dentry for that file, however it currently fails to call nfs_set_verifier(), thus causing the dentry to be immediately revalidated on the next call to nfs_lookup_revalidate() instead of following the usual lookup caching rules. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-04Thermal/int3403: Fix thermal hysteresis unit conversionlan,Tianyu
Thermal hysteresis represents a temperature difference. But the original code treats it as a temperature value, Convert it from tenths of degree Kelvin to Milli-Celsius by deducing 273200. This is not right. Kelvin and Celsius have same degree size. From temperature difference view, the conversion between tenths of degree Kelvin unit and Milli-Celsius unit is just to multiply 100. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-04Merge branch 'xgene-net'David S. Miller
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix crash for backward compatibility This patch set fixes the following issues that were reported during regression. Patch 1,2 : Adds backward compatibility with the older firmware (<= 1.13.28). Patch 3 : Use separate hardware resources (descriptor ring, prefetch buffer) that are not shared with the firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04drivers: net: xgene: fix: Use separate resourcesIyappan Subramanian
This patch fixes the following kernel crash during SGMII based 1GbE probe. BUG: Bad page state in process swapper/0 pfn:40fe6ad page:ffffffbee37a75d8 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: nonzero _count Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ #7 Call trace: [<ffffffc000087fa0>] dump_backtrace+0x0/0x12c [<ffffffc0000880dc>] show_stack+0x10/0x1c [<ffffffc0004d981c>] dump_stack+0x74/0xc4 [<ffffffc00012fe70>] bad_page+0xd8/0x128 [<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640 [<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834 [<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8 [<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c [<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280 [<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340 [<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50 [<ffffffc00042b454>] net_rx_action+0xc8/0x18c [<ffffffc0000b0880>] __do_softirq+0x114/0x24c [<ffffffc0000b0c34>] irq_exit+0x94/0xc8 [<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4 [<ffffffc000081288>] gic_handle_irq+0x30/0x7c This was due to hardware resource sharing conflict with the firmware. This patch fixes this crash by using resources (descriptor ring, prefetch buffer) that are not shared. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04drivers: net: xgene: Backward compatibility with older firmwareIyappan Subramanian
This patch adds support when used with older firmware (<= 1.13.28). - Added xgene_ring_mgr_init() to check whether ring manager is initialized - Calling xgene_ring_mgr_init() from xgene_port_ops.reset() - To handle errors, changed the return type of xgene_port_ops.reset() Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 20:19:49 +0000