summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-17dt-bindings: i2c: Add hpe,gxp-i2cNick Hawkins
Document compatibility string to support I2C controller in GXP. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17Merge remote-tracking branch 'spi/for-6.3' into spi-nextMark Brown
2023-02-17Merge tag 'gpio-fixes-for-v6.2-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a memory leak in gpio-sim that was triggered every time libgpiod tests are run in user-space * tag 'gpio-fixes-for-v6.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix a memory leak
2023-02-17Merge tag 'ata-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: "Three small fixes for 6.2 final: - Disable READ LOG DMA EXT for Samsung MZ7LH drives as these drives choke on that command, from Patrick. - Add Intel Tiger Lake UP{3,4} to the list of supported AHCI controllers (this is not technically a bug fix, but it is trivial enough that I add it here), from Simon. - Fix code comments in the pata_octeon_cf driver as incorrect formatting was causing warnings from kernel-doc, from Randy" * tag 'ata-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_octeon_cf: drop kernel-doc notation ata: ahci: Add Tiger Lake UP{3,4} AHCI controller ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LH
2023-02-17Merge tag 'mmc-v6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix potential resource leaks in SDIO card detection error path MMC host: - jz4740: Decrease maximum clock rate to workaround bug on JZ4760(B) - meson-gx: Fix SDIO support to get some WiFi modules to work again - mmc_spi: Fix error handling in ->probe()" * tag 'mmc-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: jz4740: Work around bug on JZ4760(B) mmc: mmc_spi: fix error handling in mmc_spi_probe() mmc: sdio: fix possible resource leaks in some error paths mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set
2023-02-17of: update kconfig unittest helpFrank Rowand
Add more information about the impact the of unittests have on the live devicetree and why the tests should only be enabled for developer kernels. Add information about processing the test output such that the results are more complete and comprehendable. Signed-off-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20230213185702.395776-4-frowand.list@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17of: add processing of EXPECT_NOT to of_unittest_expectFrank Rowand
scripts/dtc/of_unittest_expect processes EXPECT messages that document expected kernel messages triggered by unittest. Add processing of EXPECT_NOT messages that document kernel messages triggered by unittest that are not expected. This is commit 2 of 2, implementing the processing of EXPECT_NOT messages. Signed-off-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20230213185702.395776-3-frowand.list@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17of: prepare to add processing of EXPECT_NOT to of_unittest_expectFrank Rowand
scripts/dtc/of_unittest_expect processes EXPECT messages that document expected kernel messages triggered by unittest. Add processing of EXPECT_NOT messages that document kernel messages triggered by unittest that are not expected. This is commit 1 of 2, renaming existing variables in anticipation of the changes needed to process EXPECT_NOT, so that commit 2 of 2 will be smaller and easier to read. This commit is not intended to make any functional changes. Signed-off-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20230213185702.395776-2-frowand.list@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17of: Use preferred of_property_read_* functionsRob Herring
Replace instances of of_get_property/of_find_property() with appropriate typed of_property_read_*() functions. Link: https://lore.kernel.org/all/20230215215502.690716-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17i2c: xiic: Remove some dead codeChristophe JAILLET
wait_for_completion_timeout() never returns negative value. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17Merge tag 'sched-urgent-2023-02-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix user-after-free bug in call_usermodehelper_exec() - Fix missing user_cpus_ptr update in __set_cpus_allowed_ptr_locked() - Fix PSI use-after-free bug in ep_remove_wait_queue() * tag 'sched-urgent-2023-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Fix use-after-free in ep_remove_wait_queue() sched/core: Fix a missed update of user_cpus_ptr freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL
2023-02-17i2c: xiic: Add SCL frequency configuration supportRaviteja Narayanam
From 'clock-frequency' device tree property, configure I2C SCL frequency by calculating the timing register values according to input clock. After soft reset in reinit function, the timing registers are set to default values (configured in design tool). So, setting SCL frequency is done inside reinit function after the soft reset. This allows configuration of SCL frequency exclusively through software via device tree property, overriding the design. If the clock-frequency parameter is not specified in DT, driver doesn't configure frequency, making it backward compatible. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: xiic: Update compatible with new IP versionRaviteja Narayanam
Xilinx AXI I2C IP is updated with a bug fix for dynamic mode reads. Older IPs are handled with a workaround in which they are using xiic standard mode for all these effected use cases. Add the new IP version to compatible. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatibleRaviteja Narayanam
Add xilinx I2C new version 'xlnx,axi-iic-2.1' string to compatible. Add clock-frequency as optional property. Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17of: Use of_property_present() helperRob Herring
Use of_property_present() instead of of_get_property/of_find_property() in places where we just need to test presence of a property. Reviewed-by: Frank Rowand <frowand.list@gmail.com> Tested-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/all/20230215215547.691573-2-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17of: Add of_property_present() helperRob Herring
Add an of_property_present() function similar to fwnode_property_present(). of_property_read_bool() could be used directly, but it is cleaner to not use it on non-boolean properties. Reviewed-by: Frank Rowand <frowand.list@gmail.com> Tested-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/all/20230215215547.691573-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17of: reserved_mem: Use proper binary prefixGeert Uytterhoeven
The printed reserved memory information uses the non-standard "K" prefix, while all other printed values use proper binary prefixes. Fix this by using "Ki" instead. While at it, drop the superfluous spaces inside the parentheses, to reduce printed line length. Fixes: aeb9267eb6b1df99 ("of: reserved-mem: print out reserved-mem details during boot") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230216083725.1244817-1-geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2023-02-17selftests/bpf: Add bpf_fib_lookup testMartin KaFai Lau
This patch tests the bpf_fib_lookup helper when looking up a neigh in NUD_FAILED and NUD_STALE state. It also adds test for the new BPF_FIB_LOOKUP_SKIP_NEIGH flag. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-2-martin.lau@linux.dev
2023-02-17bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookupMartin KaFai Lau
The bpf_fib_lookup() also looks up the neigh table. This was done before bpf_redirect_neigh() was added. In the use case that does not manage the neigh table and requires bpf_fib_lookup() to lookup a fib to decide if it needs to redirect or not, the bpf prog can depend only on using bpf_redirect_neigh() to lookup the neigh. It also keeps the neigh entries fresh and connected. This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid the double neigh lookup when the bpf prog always call bpf_redirect_neigh() to do the neigh lookup. The params->smac output is skipped together when SKIP_NEIGH is set because bpf_redirect_neigh() will figure out the smac also. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
2023-02-17i2c: i801: Call i801_check_post() from i801_access()Heiner Kallweit
Avoid code duplication by calling i801_check_post() from i801_access(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: i801: Call i801_check_pre() from i801_access()Heiner Kallweit
This avoids code duplication, in a next step we'll call i801_check_post() from i801_transaction() as well. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: i801: Centralize configuring block commands in i801_block_transactionHeiner Kallweit
Similar to what was done for non-block commands, centralize block command register settings in i801_block_transaction(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: i801: Centralize configuring non-block commands in i801_simple_transactionHeiner Kallweit
Currently configuring command register settings is distributed over multiple functions. At first centralize this for non-block commands in i801_simple_transaction(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block onlyHeiner Kallweit
Currently we touch SMBAUXCTL even if not needed. That's the case for block commands that don't use block buffer mode, either because block buffer mode isn't available or because it's not supported for the respective command (e.g. I2C block transfer). Improve this by setting/resetting SMBAUXCTL_E32B in i801_block_transaction_by_block() only. Small downside is that we now access SMBAUXCTL twice for transactions that use PEC and block buffer mode. But this should a rather rare case and the impact is negligible. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction()Heiner Kallweit
Factor out non-block pre/post processing to a new function i801_simple_transaction(), complementing existing function i801_block_transaction(). This makes i801_access() better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-02-17riscv, bpf: Add bpf trampoline support for RV64Pu Lehui
BPF trampoline is the critical infrastructure of the BPF subsystem, acting as a mediator between kernel functions and BPF programs. Numerous important features, such as using BPF program for zero overhead kernel introspection, rely on this key component. We can't wait to support bpf trampoline on RV64. The related tests have passed, as well as the test_verifier with no new failure ceses. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20230215135205.1411105-5-pulehui@huaweicloud.com
2023-02-17riscv, bpf: Add bpf_arch_text_poke support for RV64Pu Lehui
Implement bpf_arch_text_poke for RV64. For call scenario, to make BPF trampoline compatible with the kernel and BPF context, we follow the framework of RV64 ftrace to reserve 4 nops for BPF programs as function entry, and use auipc+jalr instructions for function call. However, since auipc+jalr call instruction is non-atomic operation, we need to use stop-machine to make sure instructions patching in atomic context. Also, we use auipc+jalr pair and need to patch in stop-machine context for jump scenario. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20230215135205.1411105-4-pulehui@huaweicloud.com
2023-02-17riscv, bpf: Factor out emit_call for kernel and bpf contextPu Lehui
The current emit_call function is not suitable for kernel function call as it store return value to bpf R0 register. We can separate it out for common use. Meanwhile, simplify judgment logic, that is, fixed function address can use jal or auipc+jalr, while the unfixed can use only auipc+jalr. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20230215135205.1411105-3-pulehui@huaweicloud.com
2023-02-17riscv: Extend patch_text for multiple instructionsPu Lehui
Extend patch_text for multiple instructions. This is the preparaiton for multiple instructions text patching in riscv BPF trampoline, and may be useful for other scenario. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/bpf/20230215135205.1411105-2-pulehui@huaweicloud.com
2023-02-17IB/hfi1: Fix sdma.h tx->num_descs off-by-one errorsPatrick Kelsey
Fix three sources of error involving struct sdma_txreq.num_descs. When _extend_sdma_tx_descs() extends the descriptor array, it uses the value of tx->num_descs to determine how many existing entries from the tx's original, internal descriptor array to copy to the newly allocated one. As this value was incremented before the call, the copy loop will access one entry past the internal descriptor array, copying its contents into the corresponding slot in the new array. If the call to _extend_sdma_tx_descs() fails, _pad_smda_tx_descs() then invokes __sdma_tx_clean() which uses the value of tx->num_desc to drive a loop that unmaps all descriptor entries in use. As this value was incremented before the call, the unmap loop will invoke sdma_unmap_desc() on a descriptor entry whose contents consist of whatever random data was copied into it during (1), leading to cascading further calls into the kernel and driver using arbitrary data. _sdma_close_tx() was using tx->num_descs instead of tx->num_descs - 1. Fix all of the above by: - Only increment .num_descs after .descp is extended. - Use .num_descs - 1 instead of .num_descs for last .descp entry. Fixes: f4d26d81ad7f ("staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors") Link: https://lore.kernel.org/r/167656658879.2223096.10026561343022570690.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17IB/hfi1: Fix math bugs in hfi1_can_pin_pages()Patrick Kelsey
Fix arithmetic and logic errors in hfi1_can_pin_pages() that would allow hfi1 to attempt pinning pages in cases where it should not because of resource limits or lack of required capability. Fixes: 2c97ce4f3c29 ("IB/hfi1: Add pin query function") Link: https://lore.kernel.org/r/167656658362.2223096.10954762619837718026.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17RDMA/irdma: Add support for dmabuf pin memory regionsZhu Yanjun
This is a followup to the EFA dmabuf[1]. Irdma driver currently does not support on-demand-paging(ODP). So it uses habanalabs as the dmabuf exporter, and irdma as the importer to allow for peer2peer access through libibverbs. In this commit, the function ib_umem_dmabuf_get_pinned() is used. This function is introduced in EFA dmabuf[1] which allows the driver to get a dmabuf umem which is pinned and does not require move_notify callback implementation. The returned umem is pinned and DMA mapped like standard cpu umems, and is released through ib_umem_release(). [1]https://lore.kernel.org/lkml/20211007114018.GD2688930@ziepe.ca/t/ Link: https://lore.kernel.org/r/20230217011425.498847-1-yanjun.zhu@intel.com Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"Martin KaFai Lau
This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9. build bot failed on arch with different cache line size: https://lore.kernel.org/bpf/50c35055-afa9-d01e-9a05-ea5351280e4f@intel.com/ Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-02-17Merge mlx5-next into rdma.git for-nextJason Gunthorpe
Synchronize the shared mlx5 branch with net: - From Jiri: fixe a deadlock in mlx5_ib's netdev notifier unregister. - From Mark and Patrisious: add IPsec RoCEv2 support. - From Or: Rely on firmware to get special mkeys * branch mlx5-next: RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys net/mlx5: Configure IPsec steering for egress RoCEv2 traffic net/mlx5: Configure IPsec steering for ingress RoCEv2 traffic net/mlx5: Add IPSec priorities in RDMA namespaces net/mlx5: Implement new destination type TABLE_TYPE net/mlx5: Introduce new destination type TABLE_TYPE RDMA/mlx5: Track netdev to avoid deadlock during netdev notifier unregister net/mlx5e: Propagate an internal event in case uplink netdev changes net/mlx5e: Fix trap event handling Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17perf tests stat_all_metrics: Change true workload to sleep workload for ↵Kajol Jain
system wide check Testcase stat_all_metrics.sh fails in powerpc: 98: perf all metrics test : FAILED! Logs with verbose: [command]# ./perf test 98 -vv 98: perf all metrics test : --- start --- test child forked, pid 13262 Testing BRU_STALL_CPI Testing COMPLETION_STALL_CPI ---- Testing TOTAL_LOCAL_NODE_PUMPS_P23 Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in: Error: Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'. Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01 Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in: Error: Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'. ---- Based on above logs, we could see some of the hv-24x7 metric events fails, and logs suggest to run the metric event with -a option. This change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay metric parsing"), which delayed the metric parsing phase and now before metric parsing phase perf tool identifies, whether target is system-wide or not. With this change, perf_event_open will fails with workload monitoring for uncore events as expected. The perf all metric test case fails as some of the hv-24x7 metric events may need bigger workload with system wide monitoring to get the data. Fix this issue by changing current system wide check from true workload to sleep 0.01 workload. Result with the patch changes in powerpc: 98: perf all metrics test : Ok Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing") Suggested-by: Ian Rogers <irogers@google.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-17RDMA/mlx5: Use query_special_contexts for mkeysOr Har-Toov
Use query_sepcial_contexts to get the correct value of mkeys such as null_mkey, terminate_scatter_list_mkey and dump_fill_mkey, as FW will change them in certain configurations. Link: https://lore.kernel.org/r/000236f0a9487d48809f87bcc3620a3964b2d3d3.1673960981.git.leon@kernel.org Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17net/mlx5e: Use query_special_contexts for mkeysOr Har-Toov
Use query_sepcial_contexts in order to get the correct value of terminate_scatter_list_mkey, as FW will change it for certain configurations. Link: https://lore.kernel.org/r/fff70d94258233effb0e34f3d62cb08a692f5af5.1673960981.git.leon@kernel.org Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17net/mlx5: Change define name for 0x100 lkey valueOr Har-Toov
Change define of 0x100 lkey value from MLX5_INVALID_LKEY to be MLX5_TERMINATE_SCATTER_LIST_LKEY as 0x100 is the value of terminate_scatter_list_mkey. Link: https://lore.kernel.org/r/3a116dc3fbae4cb6b76a63d27d418830b06ade0c.1673960981.git.leon@kernel.org Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17net/mlx5: Expose bits for querying special mkeysOr Har-Toov
Add needed HW bits to query the values of all special mkeys. Link: https://lore.kernel.org/r/080ebb563a9717c15b1ea75d669aede676df386b.1673960981.git.leon@kernel.org Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-02-17selftests/bpf: Add global subprog context passing testsAndrii Nakryiko
Add tests validating that it's possible to pass context arguments into global subprogs for various types of programs, including a particularly tricky KPROBE programs (which cover kprobes, uprobes, USDTs, a vast and important class of programs). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230216045954.3002473-4-andrii@kernel.org
2023-02-17selftests/bpf: Convert test_global_funcs test to test_loader frameworkAndrii Nakryiko
Convert 17 test_global_funcs subtests into test_loader framework for easier maintenance and more declarative way to define expected failures/successes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230216045954.3002473-3-andrii@kernel.org
2023-02-17bpf: Fix global subprog context argument resolution logicAndrii Nakryiko
KPROBE program's user-facing context type is defined as typedef bpf_user_pt_regs_t. This leads to a problem when trying to passing kprobe/uprobe/usdt context argument into global subprog, as kernel always strip away mods and typedefs of user-supplied type, but takes expected type from bpf_ctx_convert as is, which causes mismatch. Current way to work around this is to define a fake struct with the same name as expected typedef: struct bpf_user_pt_regs_t {}; __noinline my_global_subprog(struct bpf_user_pt_regs_t *ctx) { ... } This patch fixes the issue by resolving expected type, if it's not a struct. It still leaves the above work-around working for backwards compatibility. Fixes: 91cc1a99740e ("bpf: Annotate context types") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230216045954.3002473-2-andrii@kernel.org
2023-02-17perf vendor events power10: Add JSON metric events to present CPI stall ↵Athira Rajeev
cycles in powerpc Power10 Performance Monitoring Unit (PMU) provides events to understand stall cycles of different pipeline stages. These events along with completed instructions provides useful metrics for application tuning. Patch implements the JSON changes to collect counter statistics to present the high level CPI stall breakdown metrics. New metric group is named as "CPI_STALL_RATIO" and this new metric group presents these stall metrics: - DISPATCHED_CPI ( Dispatch stall cycles per insn ) - ISSUE_STALL_CPI ( Issue stall cycles per insn ) - EXECUTION_STALL_CPI ( Execution stall cycles per insn ) - COMPLETION_STALL_CPI ( Completition stall cycles per insn ) To avoid multipling of events, PM_RUN_INST_CMPL event has been modified to use PMC5(performance monitoring counter5) instead of PMC4. This change is needed, since completion stall event is using PMC4. Usage example: ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload> Performance counter stats for 'workload': 63,056,817,982 PM_CMPL_STALL # 0.28 COMPLETION_STALL_CPI 1,743,988,038,896 PM_ISSUE_STALL # 7.73 ISSUE_STALL_CPI 225,597,495,030 PM_RUN_INST_CMPL # 6.18 DISPATCHED_CPI # 37.48 EXECUTION_STALL_CPI 1,393,916,546,654 PM_DISP_STALL_CYC 8,455,376,836,463 PM_EXEC_STALL "--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled in all group for more accuracy. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230216061240.18067-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-17dm ioctl: remove unnecessary check when using dm_get_mdptr()Hou Tao
__hash_remove() removes hash_cell with _hash_lock locked, so acquiring _hash_lock can guarantee no-NULL hc returned from dm_get_mdptr() must have not been removed and hc->md must still be md. __hash_remove() also acquires dm_hash_cells_mutex before setting mdptr as NULL. So in dm_copy_name_and_uuid(), after acquiring dm_hash_cells_mutex and ensuring returned hc is not NULL, the returned hc must still be alive and hc->md must still be md. Remove the unnecessary hc->md != md checks when using dm_get_mdptr() with _hash_lock or dm_hash_cells_mutex acquired. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-17dm ioctl: assert _hash_lock is held in __hash_removeMike Snitzer
Also update dm_early_create() to take _hash_lock when calling both __get_name_cell and __hash_remove -- given dm_early_create()'s early boot usecase this locking isn't about correctness but it allows lockdep_assert_held() to be added to __hash_remove. Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-17dm cache: add cond_resched() to various workqueue loopsMike Snitzer
Otherwise on resource constrained systems these workqueues may be too greedy. Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-17dm thin: add cond_resched() to various workqueue loopsMike Snitzer
Otherwise on resource constrained systems these workqueues may be too greedy. Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-02-17spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domainsKrzysztof Kozlowski
QSPI on Qualcomm SDM845, SC7180 and SC7280 SoCs uses OPP table (both in DTS and Linux driver) and is suuplied by CX power domain. Document missing properties to fix: sc7280-idp2.dtb: spi@88dc000: Unevaluated properties are not allowed ('operating-points-v2', 'power-domains' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230217155802.848178-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-17LoongArch, bpf: Use 4 instructions for function address in JITHengqi Chen
This patch fixes the following issue of function calls in JIT, like: [ 29.346981] multi-func JIT bug 105 != 103 The issus can be reproduced by running the "inline simple bpf_loop call" verifier test. This is because we are emiting 2-4 instructions for 64-bit immediate moves. During the first pass of JIT, the placeholder address is zero, emiting two instructions for it. In the extra pass, the function address is in XKVRANGE, emiting four instructions for it. This change the instruction index in JIT context. Let's always use 4 instructions for function address in JIT. So that the instruction sequences don't change between the first pass and the extra pass for function calls. Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/bpf/20230214152633.2265699-1-hengqi.chen@gmail.com
2023-02-17wifi: rtl8xxxu: add LEDS_CLASS dependencyArnd Bergmann
rtl8xxxu now unconditionally uses LEDS_CLASS, so a Kconfig dependency is required to avoid link errors: aarch64-linux-ld: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.o: in function `rtl8xxxu_disconnect': rtl8xxxu_core.c:(.text+0x730): undefined reference to `led_classdev_unregister' ERROR: modpost: "led_classdev_unregister" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined! ERROR: modpost: "led_classdev_register_ext" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined! Fixes: 3be01622995b ("wifi: rtl8xxxu: Register the LED and make it blink") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230217095910.2480356-1-arnd@kernel.org
generated by cgit (git 2.34.1) at 2025-09-13 15:26:53 +0000