summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-16phy: qcom: Add QCOM SNPS eUSB2 repeater driverAbel Vesa
PM8550B contains a eUSB2 repeater used for making the eUSB2 from SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. So add a new phy driver for it. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-5-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeaterAbel Vesa
The phys property is used for allowing the eusb2 to interface with the repeater, which is modelled as a phy driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-4-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dt-bindings: phy: Add qcom,snps-eusb2-repeater schema fileAbel Vesa
The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b. Add a dt-binding schema for the new driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-2-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16io_uring: Support calling io_uring_register with a registered ring fdJosh Triplett
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit of the opcode) to treat the fd as a registered index rather than a file descriptor. This makes it possible for a library to open an io_uring, register the ring fd, close the ring fd, and subsequently use the ring entirely via registered index. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org [axboe: remove extra high bit clear] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-16dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional ↵Neil Armstrong
phy-supply property Add missing optional phy-supply property used to power up PHY regulators. Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230207-b4-amlogic-amlogic-g12a-usb3-pcie-phy-fix-v1-1-3e437b759549@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16phy: rockchip-typec: Fix unsigned comparison with less than zeroJiapeng Chong
The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int. ./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"Martin Kaiser
This reverts commit fd48124e0982 ("staging: r8188eu: simplify rtw_get_ff_hwaddr"). The cleanup in this commit removes the qsel to addr mappings in rtw_get_ff_hwaddr. The underlying assumption is that rtw_write_port uses its addr parameter only for the high_queue check. This is obviously incorrect as rtw_write_port calls ffaddr2pipehdl(pdvobj, addr); where addr is mapped to a usb bulk endpoint. Unfortunately, testing did not show any problems. The Edimax V2 on which I tested has two bulk out endpoints. I guess that with the incorrect patch, addr could only be 0 (no high queue) or 6 (high queue), both of which were mapped to the first bulk out endpoint. Data transfers did still work... Fixes: fd48124e0982 ("staging: r8188eu: simplify rtw_get_ff_hwaddr") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20230213195407.15085-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16staging: r8188eu: replace hand coded loop with list_for_each_entryMartin Kaiser
In function rtw_get_stainfo, we can use list_for_each_entry to iterate over the list of stations and make the code a bit simpler. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230211170223.419205-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16staging: r8188eu: merge _rtw_enqueue_cmd into its callerMartin Kaiser
The _rtw_enqueue_cmd function is called only by rtw_enqueue_cmd. When _rtw_enqueue_cmd is called, the caller has already checked that the obj parameter is not NULL. _rtw_enqueue_cmd returns _SUCCESS in any case. We can merge the two functions and simplify the error handling. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230211165045.414424-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16powerpc/mm: Rearrange if-else block to avoid clang warningAnders Roxell
Clang warns: arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~~~ arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~ Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend is always initialized to silence the warnings. That will also simplify the 'else' path. Clang is getting confused with these warnings, but the warnings is a false-positive. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
2023-02-16powerpc/nohash: Fix build with llvm-asMichael Ellerman
When using the LLVM integrated assembler (llvm-as), the book3e build fails with: arch/powerpc/mm/nohash/tlb_low_64e.S:354:2: error: invalid instruction tlbilxva 0,%r15 ^ tlbilxva is an extended mnemonic for tlbilx, but llvm-as also doesn't support tlbilx, despite it being an e500mc instruction. Fix it by using the existing PPC_TLBILX_VA macro. The resulting binary is identical when building with binutils. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230216112915.1681631-1-mpe@ellerman.id.au
2023-02-16powerpc/nohash: Fix build error with binutils >= 2.38Michael Ellerman
With bintils >= 2.38 the ppc64_book3e_allmodconfig build fails: {standard input}: Assembler messages: {standard input}:196: Error: unrecognized opcode: `lbarx' {standard input}:196: Error: unrecognized opcode: `stbcx.' make[5]: *** [scripts/Makefile.build:252: arch/powerpc/mm/nohash/e500_hugetlbpage.o] Error 1 That happens because the default CPU for that config is e5500, set via CONFIG_TARGET_CPU, and so the assembler is building for e5500, which doesn't support those instructions. Fix it by using machine directives to tell the assembler to assemble the relevant code for e6500, which does support lbarx/stbcx. That is safe because the code already has the CPU_FTR_SMT check, which ensures the lbarx sequence doesn't run on e5500, which doesn't support SMT. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230213112322.998003-1-mpe@ellerman.id.au
2023-02-16scripts/tags.sh: fix incompatibility with PCRE2Carlos Llamas
Starting with release 10.38 PCRE2 drops default support for using \K in lookaround patterns as described in [1]. Unfortunately, scripts/tags.sh relies on such functionality to collect all_compiled_soures() leading to the following error: $ make COMPILED_SOURCE=1 tags GEN tags grep: \K is not allowed in lookarounds (but see PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK) The usage of \K for this pattern was introduced in commit 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely") which speeds up the generation of tags significantly. In order to fix this issue without compromising the performance we can switch over to an equivalent sed expression. The same matching pattern is preserved here except \K is replaced with a backreference \1. [1] https://www.pcre.org/current/doc/html/pcre2syntax.html#SEC11 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jialu Xu <xujialu@vimux.org> Cc: Vipin Sharma <vipinsh@google.com> Cc: stable@vger.kernel.org Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely") Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230215183850.3353198-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16tty: n_gsm: add keep alive supportDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test command which can be used to test the mux connection between both sides. Currently, no algorithm is implemented to make use of this command. This requires that each multiplexed upper layer protocol supervises the underlying muxer connection to handle possible connection losses. Introduce ioctl commands and functions to optionally enable keep alive handling via the test command as described in chapter 5.4.6.3.4. A single incrementing octet "ka_num" is being used for unique identification of each single keep alive packet. Retries will use the same "ka_num" value as the original packet. Retry count and interval are taken from the general parameters N2 and T2. Add usage description and basic example for the new ioctl to the n_gsm documentation. Note that support for the test command is mandatory and already present in the muxer implementation since the very first version. Also note that the previous ioctl structure gsm_config cannot be extended due to missing checks against zero of the field "unused". Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16serial: imx: remove a redundant checkTom Rix
cpp_check reports drivers/tty/serial/imx.c:1207:15: style: Condition 'r_bytes>0' is always true [knownConditionTrueFalse] if (r_bytes > 0) { r_byte is set to r_bytes = rx_ring->head - rx_ring->tail; The head - tail calculation is also done by the earlier check if (rx_ring->head <= sg_dma_len(sgl) && rx_ring->head > rx_ring->tail) { so r_bytes will always be > 0, so the second check is not needed. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230211154550.2130670-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16OPP: fix error checking in opp_migrate_dentry()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lore.kernel.org/r/20230208040037.60305-1-zhengqi.arch@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16debugfs: update comment of debugfs_rename()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), the comment of debugfs_rename should also be updated so as not to mislead readers. Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lore.kernel.org/r/20230208035634.58095-1-zhengqi.arch@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16i3c: fix device.h kernel-doc warningsRandy Dunlap
Fix all kernel-doc warnings in <linux/i3c/device.h>: include/linux/i3c/device.h:27: warning: contents before sections include/linux/i3c/device.h:196: warning: Excess function parameter 'dev' description in 'dev_to_i3cdev' Fixes: fa838c8ce537 ("i3c: move dev_to_i3cdev() to use container_of_const()") Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-i3c@lists.infradead.org Link: https://lore.kernel.org/r/20230213070324.1564-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16perf c2c: Add report option to show false sharing in adjacent cachelinesFeng Tang
Many platforms have feature of adjacent cachelines prefetch, when it is enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if one is fetched to cache, the other one could likely be fetched too, which sort of extends the cacheline size to double, thus the false sharing could happens in adjacent cachelines. 0Day has captured performance changed related with this [1], and some commercial software explicitly makes its hot global variables 128 bytes aligned (2 cache lines) to avoid this kind of extended false sharing. So add an option "--double-cl" for 'perf c2c report' to show false sharing in double cache line granularity, which acts just like the cacheline size is doubled. There is no change to c2c record. The hardware events of shared cacheline are still per cacheline, and this option just changes the granularity of how events are grouped and displayed. In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case on old kernel): ---------------------------------------------------------------------- 26 31 2 0 0 0 0xffff888103ec6000 ---------------------------------------------------------------------- 35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm 6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge 25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm 19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge 9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge 3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are listed together to give users a hint of extended false sharing. [1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/ Committer notes: Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx Removed -a, leaving just as --double-cl, as this probably is not used so frequently and perhaps will be even auto-detected if we manage to record the MSR where this is configured. Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Feng Tang <feng.tang@intel.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Joe Mario <jmario@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-16Merge tag 'intel-gpio-v6.2-2' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current intel-gpio for v6.2-2 * Ignore spurious wakeup by touchpad on Clevo NH5xAx * Miscellaneous fix(es)
2023-02-16Merge branch 'seg6-add-psp-flavor-support-for-srv6-end-behavior'Paolo Abeni
Andrea Mayer says: ==================== seg6: add PSP flavor support for SRv6 End behavior Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the Segment Routing (SR) [2] architecture on the IPv6 dataplane. In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list (SID List) is carried in the Segment Routing Header (SRH). A segment may be bound to a specific packet processing operation called "behavior". The RFC8986 [3] defines and standardizes the most common/relevant behaviors for network operators, e.g., End, End.X and End.T and so on. The RFC8986 also introduces the "flavors" framework aiming to modify or extend the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these behaviors support the following flavors (either individually or in combinations): - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Such flavors enable an End/End.X/End.T behavior to pop the SRH on the penultimate/ultimate SR endpoint node listed in the SID List or to perform a full decapsulation. Currently, the Linux kernel supports a large subset of behaviors described in RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors have not yet been implemented. In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in the SRv6 End behavior. To accomplish this task, we leverage the flavor framework previously introduced by another patchset required for supporting the efficient representation of the SID List through the NEXT-C-SID mechanism [4]. In details, the patchset is made of: - patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated function - patch 2/3: seg6: add PSP flavor support for SRv6 End behavior - patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End behavior From the user space perspective, we do not need to change the iproute2 code to support the PSP flavor. However, we provide the man page for the PSP flavor in a separate patch. Comments, improvements and suggestions are always appreciated. [1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754 [2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402 [3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 [4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression ==================== Link: https://lore.kernel.org/r/20230215134659.7613-1-andrea.mayer@uniroma2.it Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16selftests: seg6: add selftest for PSP flavor in SRv6 End behaviorAndrea Mayer
This selftest is designed for testing the PSP flavor in SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test makes use of the SRv6 End behavior and of the PSP flavor needed for removing the SRH from the IPv6 header at the penultimate node. The correct execution of the behavior is verified through reachability tests carried out between hosts. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16seg6: add PSP flavor support for SRv6 End behaviorAndrea Mayer
The "flavors" framework defined in RFC8986 [1] represents additional operations that can modify or extend a subset of existing behaviors such as SRv6 End, End.X and End.T. We report these flavors hereafter: - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Depending on how the Segment Routing Header (SRH) has to be handled, an SRv6 End* behavior can support these flavors either individually or in combinations. In this patch, we only consider the PSP flavor for the SRv6 End behavior. A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node (i.e., the one applying the SRv6 Policy) when it needs to instruct the penultimate SR Endpoint node listed in the SID List (carried by the SRH) to remove the SRH from the IPv6 header. Specifically, a PSP enabled SRv6 End behavior processes the SRH by: i) decreasing the Segment Left (SL) from 1 to 0; ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination Address (DA); iii) removing (i.e., popping) the outer SRH from the extension headers following the IPv6 header. It is important to note that PSP operation (steps i, ii, iii) takes place only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the PSP operation is not performed because it would not be possible to decrease the SL from 1 to 0. SL=2 SL=1 SL=0 | | | For example, given the SRv6 policy (SID List := < X, Y, Z >): - a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP operation as Segment Left (SL) is 1, corresponding to the Penultimate Segment of the SID List; - a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the PSP operation as the Segment Left is 2. This behavior instance will apply the "standard" End packet processing, ignoring the configured PSP flavor at all. [1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16seg6: factor out End lookup nexthop processing to a dedicated functionAndrea Mayer
The End nexthop lookup/input operations are moved into a new helper function named input_action_end_finish(). This avoids duplicating the code needed to compute the nexthop in the different flavors of the End behavior. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: dsa: ocelot: fix selecting MFD_OCELOTLukas Bulwahn
Commit 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control") adds config NET_DSA_MSCC_OCELOT_EXT, which selects the non-existing config MFD_OCELOT_CORE. Replace this select with the intended and existing MFD_OCELOT. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20230215104631.31568-1-lukas.bulwahn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16usb: dwc3: xilinx: Remove unused of_gpio,hAndy Shevchenko
of_gpio.h provides a single function, which is not used in this driver. Remove unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230215165239.83806-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16Merge branch 'sfc-devlink-support-for-ef100'Paolo Abeni
Alejandro Lucero says: ==================== sfc: devlink support for ef100 This patchset adds devlink port support for ef100 allowing setting VFs mac addresses through the VF representor devlink ports. Basic devlink infrastructure is first introduced, then support for info command. Next changes for enumerating MAE ports which will be used for devlink port creation when netdevs are registered. Adding support for devlink port_function_hw_addr_get requires changes in the ef100 driver for getting the mac address based on a client handle. This allows to obtain VFs mac addresses during netdev initialization as well what is included in patch 6. Such client handle is used in patches 7 and 8 for getting and setting devlink port addresses. ==================== Link: https://lore.kernel.org/r/20230215090828.11697-1-alejandro.lucero-palau@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add support for devlink port_function_hw_addr_set in ef100Alejandro Lucero
Using the builtin client handle id infrastructure, add support for setting the mac address linked to mports in ef100. This implies to execute an MCDI command for giving the address to the firmware for the specific devlink port. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add support for devlink port_function_hw_addr_get in ef100Alejandro Lucero
Using the builtin client handle id infrastructure, add support for obtaining the mac address linked to mports in ef100. This implies to execute an MCDI command for getting the data from the firmware for each devlink port. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: obtain device mac address based on firmware handle for ef100Alejandro Lucero
Getting device mac address is currently based on a specific MCDI command only available for the PF. This patch changes the MCDI command to a generic one for PFs and VFs based on a client handle. This allows both PFs and VFs to ask for their mac address during initialization using the CLIENT_HANDLE_SELF. Moreover, the patch allows other client handles which will be used by the PF to ask for mac addresses linked to VFs. This is necessary for suporting the port_function_hw_addr_get devlink function in further patches. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add devlink port support for ef100Alejandro Lucero
Using the data when enumerating mports, create devlink ports just before netdevs are registered and remove those devlink ports after netdev has been unregistered. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add mport lookup based on driver's mport dataAlejandro Lucero
Obtaining mport id is based on asking the firmware about it. This is still needed for mport initialization itself, but once the mport data is now kept by the driver, further mport id request can be satisfied internally without firmware interaction. Previous function is just modified in name making clear the firmware interaction. The new function uses the old name and looks for the data in the mport data structure. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: enumerate mports in ef100Alejandro Lucero
MAE ports (mports) are the ports on the EF100 embedded switch such as networking PCIe functions, the physical port, and potentially others. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add devlink info support for ef100Alejandro Lucero
Add devlink info support for ef100. The information reported is obtained through the MCDI interface with the specific meaning defined in new documentation file. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add devlink support for ef100Alejandro Lucero
Add devlink infrastructure support. Further patches add devlink info and devlink port support. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16hid: bigben_probe(): validate report countPietro Borrello
bigben_probe() does not validate that the output report has the needed report values in the first field. A malicious device registering a report with one field and a single value causes an head OOB write in bigben_worker() when accessing report_field->value[1] to report_field->value[7]. Use hid_validate_values() which takes care of all the needed checks. Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-16devlink: Fix netdev notifier chain corruptionIdo Schimmel
Cited commit changed devlink to register its netdev notifier block on the global netdev notifier chain instead of on the per network namespace one. However, when changing the network namespace of the devlink instance, devlink still tries to unregister its notifier block from the chain of the old namespace and register it on the chain of the new namespace. This results in corruption of the notifier chains, as the same notifier block is registered on two different chains: The global one and the per network namespace one. In turn, this causes other problems such as the inability to dismantle namespaces due to netdev reference count issues. Fix by preventing devlink from moving its notifier block between namespaces. Reproducer: # echo "10 1" > /sys/bus/netdevsim/new_device # ip netns add test123 # devlink dev reload netdevsim/netdevsim10 netns test123 # ip netns del test123 [ 71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 71.938348] leaked reference. Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16iommu/amd: Improve page fault error reportingVasant Hegde
If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flagsAndrew Donnellan
When a user updates a variable through the PLPKS secvar interface, we take the first 8 bytes of the data written to the update attribute to pass through to the H_PKS_SIGNED_UPDATE hcall as flags. These bytes are always written in big-endian format. Currently, the flags bytes are memcpy()ed into a u64, which is then loaded into a register to pass as part of the hcall. This means that on LE systems, the bytes are in the wrong order. Use be64_to_cpup() instead, to ensure the flags bytes are byteswapped if necessary. Reported-by: Stefan Berger <stefanb@linux.ibm.com> Fixes: ccadf154cb00 ("powerpc/pseries: Implement secvars for dynamic secure boot") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230216070903.355091-1-ajd@linux.ibm.com
2023-02-16iommu/amd: Do not identity map v2 capable device when snp is enabledVasant Hegde
Flow: - Booted system with SNP enabled, memory encryption off and IOMMU DMA translation mode - AMD driver detects v2 capable device and amd_iommu_def_domain_type() returns identity mode - amd_iommu_domain_alloc() returns NULL an SNP is enabled - System will fail to register device On SNP enabled system, passthrough mode is not supported. IOMMU default domain is set to translation mode. We need to return zero from amd_iommu_def_domain_type() so that it allocates translation domain. Fixes: fb2accadaa94 ("iommu/amd: Introduce function to check and enable SNP") CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16Merge branch 'net-sched-transition-actions-to-pcpu-stats-and-rcu'Paolo Abeni
Pedro Tammela says: ==================== net/sched: transition actions to pcpu stats and rcu Following the work done for act_pedit[0], transition the remaining tc actions to percpu stats and rcu, whenever possible. Percpu stats make updating the action stats very cheap, while combining it with rcu action parameters makes it possible to get rid of the per action lock in the datapath. For act_connmark and act_nat we run the following tests: - tc filter add dev ens2f0 ingress matchall action connmark - tc filter add dev ens2f0 ingress matchall action nat ingress any 10.10.10.10 Our setup consists of a 26 cores Intel CPU and a 25G NIC. We use TRex to shoot 10mpps TCP packets and take perf measurements. Both actions improved performance as expected since the datapath lock disappeared. For act_pedit we move the drop counter to percpu, when available. For act_gate we move the counters to percpu, when available. [0] https://lore.kernel.org/all/20230131145149.3776656-1-pctammela@mojatatu.com/ ==================== Link: https://lore.kernel.org/r/20230214211534.735718-1-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_pedit: use percpu overlimit counter when availablePedro Tammela
Since act_pedit now has access to percpu counters, use the tcf_action_inc_overlimit_qstats wrapper that will use the percpu counter whenever they are available. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_gate: use percpu statsPedro Tammela
The tc action act_gate was using shared stats, move it to percpu stats. tdc results: 1..12 ok 1 5153 - Add gate action with priority and sched-entry ok 2 7189 - Add gate action with base-time ok 3 a721 - Add gate action with cycle-time ok 4 c029 - Add gate action with cycle-time-ext ok 5 3719 - Replace gate base-time action ok 6 d821 - Delete gate action with valid index ok 7 3128 - Delete gate action with invalid index ok 8 7837 - List gate actions ok 9 9273 - Flush gate actions ok 10 c829 - Add gate action with duplicate index ok 11 3043 - Add gate action with invalid index ok 12 2930 - Add gate action with cookie Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_connmark: transition to percpu stats and rcuPedro Tammela
The tc action act_connmark was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 13.55% tcf_connmark_act - 81.18% _raw_spin_lock 80.46% native_queued_spin_lock_slowpath perf after: - 2.85% tcf_connmark_act tdc results: 1..15 ok 1 2002 - Add valid connmark action with defaults ok 2 56a5 - Add valid connmark action with control pass ok 3 7c66 - Add valid connmark action with control drop ok 4 a913 - Add valid connmark action with control pipe ok 5 bdd8 - Add valid connmark action with control reclassify ok 6 b8be - Add valid connmark action with control continue ok 7 d8a6 - Add valid connmark action with control jump ok 8 aae8 - Add valid connmark action with zone argument ok 9 2f0b - Add valid connmark action with invalid zone argument ok 10 9305 - Add connmark action with unsupported argument ok 11 71ca - Add valid connmark action and replace it ok 12 5f8f - Add valid connmark action with cookie ok 13 c506 - Replace connmark with invalid goto chain control ok 14 6571 - Delete connmark action with valid index ok 15 3426 - Delete connmark action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_nat: transition to percpu stats and rcuPedro Tammela
The tc action act_nat was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 10.48% tcf_nat_act - 81.83% _raw_spin_lock 81.08% native_queued_spin_lock_slowpath perf after: - 0.48% tcf_nat_act tdc results: 1..27 ok 1 7565 - Add nat action on ingress with default control action ok 2 fd79 - Add nat action on ingress with pipe control action ok 3 eab9 - Add nat action on ingress with continue control action ok 4 c53a - Add nat action on ingress with reclassify control action ok 5 76c9 - Add nat action on ingress with jump control action ok 6 24c6 - Add nat action on ingress with drop control action ok 7 2120 - Add nat action on ingress with maximum index value ok 8 3e9d - Add nat action on ingress with invalid index value ok 9 f6c9 - Add nat action on ingress with invalid IP address ok 10 be25 - Add nat action on ingress with invalid argument ok 11 a7bd - Add nat action on ingress with DEFAULT IP address ok 12 ee1e - Add nat action on ingress with ANY IP address ok 13 1de8 - Add nat action on ingress with ALL IP address ok 14 8dba - Add nat action on egress with default control action ok 15 19a7 - Add nat action on egress with pipe control action ok 16 f1d9 - Add nat action on egress with continue control action ok 17 6d4a - Add nat action on egress with reclassify control action ok 18 b313 - Add nat action on egress with jump control action ok 19 d9fc - Add nat action on egress with drop control action ok 20 a895 - Add nat action on egress with DEFAULT IP address ok 21 2572 - Add nat action on egress with ANY IP address ok 22 37f3 - Add nat action on egress with ALL IP address ok 23 6054 - Add nat action on egress with cookie ok 24 79d6 - Add nat action on ingress with cookie ok 25 4b12 - Replace nat action with invalid goto chain control ok 26 b811 - Delete nat action with valid index ok 27 a521 - Delete nat action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16iommu: Fix error unwind in iommu_group_alloc()Jason Gunthorpe
If either iommu_group_grate_file() fails then the iommu_group is leaked. Destroy it on these error paths. Found by kselftest/iommu/iommufd_fail_nth Fixes: bc7d12b91bd3 ("iommu: Implement reserved_regions iommu-group sysfs file") Fixes: c52c72d3dee8 ("iommu: Add sysfs attribyte for domain type") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/0-v1-8f616bee028d+8b-iommu_group_alloc_leak_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16iommu/of: mark an unused function as __maybe_unusedRandy Dunlap
When CONFIG_OF_ADDRESS is not set, there is a build warning/error about an unused function. Annotate the function to quieten the warning/error. ../drivers/iommu/of_iommu.c:176:29: warning: 'iommu_resv_region_get_type' defined but not used [-Wunused-function] 176 | static enum iommu_resv_type iommu_resv_region_get_type(struct device *dev, struct resource *phys, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will@kernel.org> Cc: iommu@lists.linux.dev Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230209010359.23831-1-rdunlap@infradead.org [joro: Improve code formatting] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16Merge tag 'drm-misc-next-fixes-2023-02-09' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: Contains a number of fixes to vc4 and ivpu. The patches to the probe helpers were cherry-picked from the regular development branch. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y+S6HBmaRJNPYiBG@linux-uq9g
2023-02-16Merge branch 'net-core-commmon-prints-for-promisc'Paolo Abeni
Jesse Brandeburg says: ==================== net/core: commmon prints for promisc Add a print to the kernel log for allmulticast entry and exit, and standardize the print for entry and exit of promiscuous mode. These prints are useful to both user and developer and should have the triggering driver/bus/device info that netdev_info (optionally) gives. ==================== Link: https://lore.kernel.org/r/20230214210117.23123-1-jesse.brandeburg@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/core: refactor promiscuous mode messageJesse Brandeburg
The kernel stack can be more consistent by printing the IFF_PROMISC aka promiscuous enable/disable messages with the standard netdev_info message which can include bus and driver info as well as the device. typical command usage from user space looks like: ip link set eth0 promisc <on|off> But lots of utilities such as bridge, tcpdump, etc put the interface into promiscuous mode. old message: [ 406.034418] device eth0 entered promiscuous mode [ 408.424703] device eth0 left promiscuous mode new message: [ 406.034431] ice 0000:17:00.0 eth0: entered promiscuous mode [ 408.424715] ice 0000:17:00.0 eth0: left promiscuous mode Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 07:29:38 +0000