summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-26net: dsa: mv88e6xxx: Allow external SMI if serialMarcus Carlberg
p0_mode set to one of the supported serial mode should not prevent configuring the external SMI interface in mv88e6xxx_g2_scratch_gpio_set_smi. The current masking of the p0_mode only checks the first 2 bits. This results in switches supporting serial mode cannot setup external SMI on certain serial modes (Ex: 1000BASE-X and SGMII). Extend the mask of the p0_mode to include the reduced modes and serial modes as allowed modes for the external SMI interface. Signed-off-by: Marcus Carlberg <marcus.carlberg@axis.com> Link: https://lore.kernel.org/r/20220824093706.19049-1-marcus.carlberg@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: smsc911x: Stop and start PHY during suspend and resumeFlorian Fainelli
Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not properly stopping and restarting the PHY during suspend/resume. Correct that by indicating that the MAC is in charge of PHY PM operations and ensure that all MDIO bus activity is quiescent during suspend. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Fixes: 2aa70f864955 ("net: smsc911x: Quieten netif during suspend") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26genetlink: hold read cb_lock during iteration of genl_fam_idr in genl_bind()Jiri Pirko
In genl_bind(), currently genl_lock and write cb_lock are taken for iteration of genl_fam_idr and processing of static values stored in struct genl_family. Take just read cb_lock for this task as it is sufficient to guard the idr and the struct against concurrent genl_register/unregister_family() calls. This will allow to run genl command processing in genl_rcv() and mnl_socket_setsockopt(.., NETLINK_ADD_MEMBERSHIP, ..) in parallel. Reported-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220825081940.1283335-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26tg3: Disable tg3 device on system reboot to avoid triggering AERKai-Heng Feng
Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/ BugLink: https://bugs.launchpad.net/bugs/1917471 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net/mlx4: Fix error check for dma_map_sgJack Wang
dma_map_sg return 0 on error. Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20220825063533.21015-1-jinpu.wang@ionos.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: sparx5: fix handling uneven length packets in manual extractionCasper Andersson
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would have the checksum included up to next multiple of 4 (a 77 bytes packet would have 3 bytes of ethernet checksum included). The check for the value expects it in host (Little) endian. Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: devlink: add RNLT lock assertion to devlink_compat_switch_id_get()Jiri Pirko
Similar to devlink_compat_phys_port_name_get(), make sure that devlink_compat_switch_id_get() is called with RTNL lock held. Comment already says so, so put this in code as well. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220825112923.1359194-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26Merge tag 'for-net-2022-08-25' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix handling of duplicate connection handle - Fix handling of HCI vendor opcode - Fix suspend performance regression - Fix build errors - Fix not handling shutdown condition on ISO sockets - Fix double free issue * tag 'for-net-2022-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn Bluetooth: move from strlcpy with unused retval to strscpy Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt Bluetooth: ISO: Fix not handling shutdown condition Bluetooth: hci_sync: fix double mgmt_pending_free() in remove_adv_monitor() Bluetooth: MGMT: Fix Get Device Flags Bluetooth: L2CAP: Fix build errors in some archs Bluetooth: hci_sync: Fix suspend performance regression Bluetooth: hci_event: Fix vendor (unknown) opcode status handling ==================== Link: https://lore.kernel.org/r/20220825234559.1837409-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26mlx4: Do type_clear() for devlink ports when type_set() was called previouslyJiri Pirko
Whenever the type_set() is called on a devlink port, accompany it by matching type_clear() during cleanup. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220825114031.1361478-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: dsa: mv88e6xxx: support RGMII cmodeMarcus Carlberg
Since the probe defaults all interfaces to the highest speed possible (10GBASE-X in mv88e6393x) before the phy mode configuration from the devicetree is considered it is currently impossible to use port 0 in RGMII mode. This change will allow RGMII modes to be configurable for port 0 enabling port 0 to be configured as RGMII as well as serial depending on configuration. Signed-off-by: Marcus Carlberg <marcus.carlberg@axis.com> Link: https://lore.kernel.org/r/20220822144136.16627-1-marcus.carlberg@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26docs/conf.py: add function attribute '__fix_address' to conf.pyMenglong Dong
Stephen Rothwell reported htmldocs warning when merging net-next: Documentation/networking/kapi:26: net/core/skbuff.c:780: WARNING: Error in declarator or parameters Invalid C declaration: Expecting "(" in parameters. [error at 19] void __fix_address kfree_skb_reason (struct sk_buff *skb, enum skb_drop_reason reason) -------------------^ Add __fix_address keyword to c_id_attributes array in conf.py to fix the warning. Link: https://lore.kernel.org/linux-next/20220825154105.534d78ab@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Menglong Dong <imagedong@tencent.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-08-27perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMUStephane Eranian
Existing code was generating bogus counts for the SNB IMC bandwidth counters: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000327813 1,024.03 MiB uncore_imc/data_reads/ 1.000327813 20.73 MiB uncore_imc/data_writes/ 2.000580153 261,120.00 MiB uncore_imc/data_reads/ 2.000580153 23.28 MiB uncore_imc/data_writes/ The problem was introduced by commit: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Where the read_counter callback was replace to point to the generic uncore_mmio_read_counter() function. The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in MMIO. But uncore_mmio_read_counter() is using a readq() call to read from MMIO therefore reading 64-bit from MMIO. Although this is okay for the uncore_perf_event_update() function because it is shifting the value based on the actual counter width to compute a delta, it is not okay for the uncore_pmu_event_start() which is simply reading the counter and therefore priming the event->prev_count with a bogus value which is responsible for causing bogus deltas in the perf stat command above. The fix is to reintroduce the custom callback for read_counter for the SNB IMC PMU and use readl() instead of readq(). With the change the output of perf stat is back to normal: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000120987 296.94 MiB uncore_imc/data_reads/ 1.000120987 138.42 MiB uncore_imc/data_writes/ 2.000403144 175.91 MiB uncore_imc/data_reads/ 2.000403144 68.50 MiB uncore_imc/data_writes/ Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com
2022-08-26selftests/bpf: fix type conflict in test_tc_dtimeJames Hilliard
The sys/socket.h header isn't required to build test_tc_dtime and may cause a type conflict. Fixes the following error: In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/test_tc_dtime.c:18: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: error: conflicting types for 'int8_t'; have '__int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ In file included from progs/test_tc_dtime.c:5: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'char'} 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: error: conflicting types for 'int64_t'; have '__int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long int'} 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/test_tc_dtime.o] Error 1 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20220826050703.869571-1-james.hilliard1@gmail.com Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-26Smack: Provide read control for io_uring_cmdCasey Schaufler
Limit io_uring "cmd" options to files for which the caller has Smack read access. There may be cases where the cmd option may be closer to a write access than a read, but there is no way to make that determination. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-26Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A bumper crop of arm64 fixes for -rc3. The largest change is fixing our parsing of the 'rodata=full' command line option, which kstrtobool() started treating as 'rodata=false'. The fix actually makes the parsing of that option much less fragile and updates the documentation at the same time. We still have a boot issue pending when KASLR is disabled at compile time, but there's a fresh fix on the list which I'll send next week if it holds up to testing. Summary: - Fix workaround for Cortex-A76 erratum #1286807 - Add workaround for AMU erratum #2457168 on Cortex-A510 - Drop reference to removed CONFIG_ARCH_RANDOM #define - Fix parsing of the "rodata=full" cmdline option - Fix a bunch of issues in the SME register state switching and sigframe code - Fix incorrect extraction of the CTR_EL0.CWG register field - Fix ACPI cache topology probing when the PPTT is not present - Trivial comment and whitespace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/sme: Don't flush SVE register state when handling SME traps arm64/sme: Don't flush SVE register state when allocating SME storage arm64/signal: Flush FPSIMD register state when disabling streaming mode arm64/signal: Raise limit on stack frames arm64/cache: Fix cache_type_cwg() for register generation arm64/sysreg: Guard SYS_FIELD_ macros for asm arm64/sysreg: Directly include bitfield.h arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly arm64: fix rodata=full arm64: Fix comment typo docs/arm64: elf_hwcaps: unify newlines in HWCAP lists arm64: adjust KASLR relocation after ARCH_RANDOM removal arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76
2022-08-26Merge tag 'riscv-for-linus-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A handful of fixes for the Microchip device trees - A pair of fixes to eliminate build warnings * tag 'riscv-for-linus-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: microchip: mpfs: remove pci axi address translation property riscv: dts: microchip: mpfs: remove bogus card-detect-delay riscv: dts: microchip: mpfs: remove ti,fifo-depth property riscv: dts: microchip: mpfs: fix incorrect pcie child node name riscv: traps: add missing prototype riscv: signal: fix missing prototype warning riscv: dts: microchip: correct L2 cache interrupts
2022-08-26Merge tag 'loongarch-fixes-6.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix a bunch of build errors/warnings, a poweroff error and an unbalanced locking in do_page_fault()" * tag 'loongarch-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: mm: Avoid unnecessary page fault retires on shared memory types LoongArch: Add subword xchg/cmpxchg emulation LoongArch: Cleanup headers to avoid circular dependency LoongArch: Cleanup reset routines with new API LoongArch: Fix build warnings in VDSO LoongArch: Select PCI_QUIRKS to avoid build error
2022-08-26Merge tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in 6.0-rc1, otherwise vc4, nouveau fixes. gem: - Fix handle release leak nouveau: - Fix fencing when moving BO vc4: - HDMI fixes amdgpu: - GFX 11.0 fixes - PSP XGMI handling fixes - GFX9 fix for compute-only IPs - Drop duplicated function call - Fix warning due to missing header - NBIO 7.7 fixes - DCN 3.1.4 fixes - SDMA 6.0 fixes - SMU 13.0 fixes - Arcturus GPUVM page table fix - MMHUB 1.0 fix amdkfd: - GC 10.3.7 fix radeon: - Delayed work flush fix" * tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly drm/amdgpu: add MGCG perfmon setting for gfx11 drm/amdkfd: Fix isa version for the GC 10.3.7 drm/amdgpu: Fix page table setup on Arcturus drm/amd/pm: update SMU 13.0.0 driver_if header drm/amdgpu: add sdma instance check for gfx11 CGCG drm/amd/display: enable PCON support for dcn314 drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0 nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf drm/radeon: add a force flush to delay work when radeon drm/amd/display: Include missing header drm/amdgpu: Remove the additional kfd pre reset call for sriov drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup. drm/amdgpu: fix hive reference leak when adding xgmi device drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1 drm/gem: Fix GEM handle release errors drm/vc4: hdmi: Rework power up ...
2022-08-26Merge tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - MD pull request via Song: - Fix for clustered raid (Guoqing Jiang) - req_op fix (Bart Van Assche) - Fix race condition in raid recreate (David Sloan) - loop configuration overflow fix (Siddh) - Fix missing commit_rqs call for certain conditions (Yu) * tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block: md: call __md_stop_writes in md_stop Revert "md-raid: destroy the bitmap after destroying the thread" md: Flush workqueue md_rdev_misc_wq in md_alloc() md/raid10: Fix the data type of an r10_sync_page_io() argument loop: Check for overflow while configuring loop blk-mq: fix io hung due to missing commit_rqs
2022-08-26Merge tag 'io_uring-6.0-2022-08-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Add missing header file to the MAINTAINERS entry for io_uring (Ammar) - liburing and the kernel ship the same io_uring.h header, but one change we've had for a long time only in liburing is to ensure it's C++ safe. Add extern C around it, so we can more easily sync them in the future (Ammar) - Fix an off-by-one in the sync cancel added in this merge window (me) - Error handling fix for passthrough (Kanchan) - Fix for address saving for async execution for the zc tx support (Pavel) - Fix ordering for TCP zc notifications, so we always have them ordered correctly between "data was sent" and "data was acked". This isn't strictly needed with the notification slots, but we've been pondering disabling the slot support for 6.0 - and if we do, then we do require the ordering to be sane. Regardless of that, it's the sane thing to do in terms of API (Pavel) - Minor cleanup for indentation and lockdep annotation (Pavel) * tag 'io_uring-6.0-2022-08-26' of git://git.kernel.dk/linux-block: io_uring/net: save address for sendzc async execution io_uring: conditional ->async_data allocation io_uring/notif: order notif vs send CQEs io_uring/net: fix indentation io_uring/net: fix zc send link failing io_uring/net: fix must_hold annotation io_uring: fix submission-failure handling for uring-cmd io_uring: fix off-by-one in sync cancelation file check io_uring: uapi: Add `extern "C"` in io_uring.h for liburing MAINTAINERS: Add `include/linux/io_uring_types.h`
2022-08-26fbdev: fbcon: Properly revert changes when vc_resize() failedShigeru Yoshida
fbcon_do_set_font() calls vc_resize() when font size is changed. However, if if vc_resize() failed, current implementation doesn't revert changes for font size, and this causes inconsistent state. syzbot reported unable to handle page fault due to this issue [1]. syzbot's repro uses fault injection which cause failure for memory allocation, so vc_resize() failed. This patch fixes this issue by properly revert changes for font related date when vc_resize() failed. Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1] Reported-by: syzbot+a168dbeaaa7778273c1b@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # 5.15+
2022-08-26Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten fixes. Of the three core changes, the two large ones are a complete reversion of the async rework and an ALUA timing rework (the latter shouldn't affect non-ALUA paths). The remaining patches are all small and all but one in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Revert "Rework asynchronous resume support" scsi: core: Fix passthrough retry counter handling scsi: ufs: core: Reduce the power mode change timeout scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static scsi: megaraid_sas: Remove unnecessary kfree() scsi: megaraid_sas: Fix double kfree() scsi: ufs: core: Enable link lost interrupt scsi: core: Allow the ALUA transitioning state enough time scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
2022-08-26io_uring/net: fix overexcessive retriesPavel Begunkov
Length parameter of io_sg_from_iter() can be smaller than the iterator's size, as it's with TCP, so when we set from->count at the end of the function we truncate the iterator forcing TCP to return preliminary with a short send. It affects zerocopy sends with large payload sizes and leads to retries and possible request failures. Fixes: 3ff1a0d395c00 ("io_uring: enable managed frags with register buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0bc0d5179c665b4ef5c328377c84c7a1f298467e.1661530037.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-26wait_on_bit: add an acquire memory barrierMikulas Patocka
There are several places in the kernel where wait_on_bit is not followed by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read). On architectures with weak memory ordering, it may happen that memory accesses that follow wait_on_bit are reordered before wait_on_bit and they may return invalid data. Fix this class of bugs by introducing a new function "test_bit_acquire" that works like test_bit, but has acquire memory ordering semantics. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-26/dev/null: add IORING_OP_URING_CMD supportPaul Moore
This patch adds support for the io_uring command pass through, aka IORING_OP_URING_CMD, to the /dev/null driver. As with all of the /dev/null functionality, the implementation is just a simple sink where commands go to die, but it should be useful for developers who need a simple IORING_OP_URING_CMD test device that doesn't require any special hardware. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-26selinux: implement the security_uring_cmd() LSM hookPaul Moore
Add a SELinux access control for the iouring IORING_OP_URING_CMD command. This includes the addition of a new permission in the existing "io_uring" object class: "cmd". The subject of the new permission check is the domain of the process requesting access, the object is the open file which points to the device/file that is the target of the IORING_OP_URING_CMD operation. A sample policy rule is shown below: allow <domain> <file>:io_uring { cmd }; Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-26lsm,io_uring: add LSM hooks for the new uring_cmd file opLuis Chamberlain
io-uring cmd support was added through ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd"), this extended the struct file_operations to allow a new command which each subsystem can use to enable command passthrough. Add an LSM specific for the command passthrough which enables LSMs to inspect the command details. This was discussed long ago without no clear pointer for something conclusive, so this enables LSMs to at least reject this new file operation. [0] https://lkml.kernel.org/r/8adf55db-7bab-f59d-d612-ed906b948d19@schaufler-ca.com Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-26ALSA: control: Re-order bounds checking in get_ctl_id_hash()Dan Carpenter
These two checks are in the reverse order so it might read one element beyond the end of the array. First check if the "i" is within bounds before using it. Fixes: 6ab55ec0a938 ("ALSA: control: Fix an out-of-bounds bug in get_ctl_id_hash()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YwjgNh/gkG1hH7po@kili Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel borkmann says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 14 day(s) which contain a total of 13 files changed, 61 insertions(+), 24 deletions(-). The main changes are: 1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi. 2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger. 3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu. 4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui. 5) Fix range tracking for array poke descriptors, from Daniel Borkmann. 6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson. 7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian. 8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima. 9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26wifi: mt76: mt7921e: fix crash in chip reset failDeren Wu
In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? process_one_work+0x1320/0x1320 [ 5859.633828] ? kthread_complete_and_exit+0x30/0x30 [ 5859.633834] ret_from_fork+0x1f/0x30 [ 5859.633842] </TASK> Cc: stable@vger.kernel.org Fixes: 0efaf31dec57 ("mt76: mt7921: fix MT7921E reset failure") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Link: https://lore.kernel.org/r/727eb5ffd3c7c805245e512da150ecf0a7154020.1659452909.git.deren.wu@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26net: sched: remove unnecessary init of qdisc skb headZhengchao Shao
The memory allocated by using kzallloc_node and kcalloc has been cleared. Therefore, the structure members of the new qdisc are 0. So there's no need to explicitly assign a value of 0. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26Merge tag 'wireless-next-2022-08-26-v2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26platform/x86: thinkpad_acpi: Explicitly set to balanced mode on startupMario Limonciello
It was observed that on a Thinkpad T14 Gen1 (AMD) that the platform profile is starting up in 'low-power' mode after refreshing what the firmware had. This is most likely a firmware bug, but as a harmless workaround set the default profile to 'balanced' at thinkpad_acpi startup. Reported-by: madcatx@atlas.cz Link: https://bugzilla.kernel.org/show_bug.cgi?id=216347 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220819180101.6383-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-08-26Merge tag 'wireless-2022-08-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== pull-request: wireless-2022-08-26 Here are a couple of fixes for the current cycle, see the tag description below. Just a couple of fixes: * two potential leaks * use-after-free in certain scan races * warning in IBSS code * error return from a debugfs file was wrong * possible NULL-ptr-deref when station lookup fails Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26crypto: lib - remove unneeded selection of XOR_BLOCKSEric Biggers
CRYPTO_LIB_CHACHA_GENERIC doesn't need to select XOR_BLOCKS. It perhaps was thought that it's needed for __crypto_xor, but that's not the case. Enabling XOR_BLOCKS is problematic because the XOR_BLOCKS code runs a benchmark when it is initialized. That causes a boot time regression on systems that didn't have it enabled before. Therefore, remove this unnecessary and problematic selection. Fixes: e56e18985596 ("lib/crypto: add prompts back to crypto libraries") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26r8152: add PID for the Lenovo OneLink+ DockJean-Francois Le Fillatre
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ice) This series contains updates to ice driver only. Marcin adds support for TC parsing on TTL and ToS fields. Anatolli adds support for devlink port split command to allow configuration of various port configurations. Jake allows for passing and writing an additional NVM write activate field by expanding current cmd_flag. Ani makes PHY debug output more readable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26wifi: rtw88: fix uninitialized use of primary channel indexPing-Ke Shih
clang reports uninitialized use: >> drivers/net/wireless/realtek/rtw88/main.c:731:2: warning: variable 'primary_channel_idx' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:754:39: note: uninitialized use occurs here hal->current_primary_channel_index = primary_channel_idx; ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:687:24: note: initialize the variable 'primary_channel_idx' to silence this warning u8 primary_channel_idx; ^ = '\0' This situation could not happen, because possible channel bandwidth 20/40/80MHz are enumerated. Fixes: 341dd1f7de4c ("wifi: rtw88: add the update channel flow to support setting by parameters") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220815062004.22920-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26net: phylink: allow RGMII/RTBI in-band statusQingfang DENG
As per RGMII specification v2.0, section 3.4.1, RGMII/RTBI has an optional in-band status feature where the PHY's link status, speed and duplex mode can be passed to the MAC. Allow RGMII/RTBI to use in-band status. Signed-off-by: Qingfang DENG <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26platform/x86: asus-wmi: Fix the name of the mic-mute LED classdevPaddyKP_Yao
According to well-known-leds.txt, we should use "platform::micmute" instead of "asus::micmute" for the name of the mic-mute LED classdev. Signed-off-by: PaddyKP_Yao <PaddyKP_Yao@asus.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220825004305.709539-1-PaddyKP_Yao@asus.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-08-26Merge branch 'prestera-matchall'David S. Miller
Maksym Glubokiy says: ==================== net: prestera: matchall features This patch series extracts matchall rules management out of SPAN API implementation and adds 2 features on top of that: - support for egress traffic (mirred egress action) - proper rule priorities management between matchall and flower ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: prestera: manage matchall and flower prioritiesMaksym Glubokiy
matchall rules can be added only to chain 0 and their priorities have limitations: - new matchall ingress rule's priority must be higher (lower value) than any existing flower rule; - new matchall egress rule's priority must be lower (higher value) than any existing flower rule. The opposite works for flower rule adding: - new flower ingress rule's priority must be lower (higher value) than any existing matchall rule; - new flower egress rule's priority must be higher (lower value) than any existing matchall rule. This is a hardware limitation and thus must be properly handled in driver by reporting errors to the user when newly added rule has such a priority that cannot be installed into the hardware. To achieve this, the driver must maintain both min/max matchall priorities for every flower block when user adds/deletes a matchall rule, as well as both min/max flower priorities for chain 0 for every adding/deletion of flower rules for chain 0. Cc: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: prestera: add support for egress traffic mirroringSerhiy Boiko
This enables adding matchall rules for egress: tc filter add .. egress .. matchall skip_sw \ action mirred egress mirror dev .. Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: prestera: acl: extract matchall logic into a separate fileSerhiy Boiko
This commit adds more clarity to handling of TC_CLSMATCHALL_REPLACE and TC_CLSMATCHALL_DESTROY events by calling newly added *_mall_*() handlers instead of directly calling SPAN API. This also extracts matchall rules management out of SPAN API since SPAN is a hardware module which is used to implement 'matchall egress mirred' action only. Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: asix: ax88772: add ethtool pause configurationOleksij Rempel
Add phylink based ethtool pause configuration Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26net: asix: ax88772: migrate to phylinkOleksij Rempel
There are some exotic ax88772 based devices which may require functionality provide by the phylink framework. For example: - US100A20SFP, USB 2.0 auf LWL Converter with SFP Cage - AX88772B USB to 100Base-TX Ethernet (with RMII) demo board, where it is possible to switch between internal PHY and external RMII based connection. So, convert this driver to phylink as soon as possible. Tested with: - AX88772A + internal PHY - AX88772B + external DP83TD510E T1L PHY Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26wifi: mac80211: use full 'unsigned int' typeXin Gao
The full 'unsigned int' is better than 'unsigned'. Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Link: https://lore.kernel.org/r/20220816181040.9044-1-gaoxin@cdjrlc.com [fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: read ethtool's sta_stats from sinfoRyder Lee
Driver may update sinfo directly through .sta_statistics, so this patch makes sure that ethool gets the correct statistics. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/f9edff14dd7f5205acf1c21bae8e9d8f9802dd88.1661466499.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: correct SMPS mode in HE 6 GHz capabilityJohannes Berg
If we add 6 GHz capability in MLO, we cannot use the SMPS mode from the deflink. Pass it separately instead since on a second link we don't even have a link data struct yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-24 03:44:21 +0000