summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-19KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulationWanpeng Li
Huawei folks reported a read out-of-bounds vulnerability in kvm pio emulation. - "inb" instruction to access PIT Mod/Command register (ioport 0x43, write only, a read should be ignored) in guest can get a random number. - "rep insb" instruction to access PIT register port 0x43 can control memcpy() in emulator_pio_in_emulated() to copy max 0x400 bytes but only read 1 bytes, which will disclose the unimportant kernel memory in host but no crash. The similar test program below can reproduce the read out-of-bounds vulnerability: void hexdump(void *mem, unsigned int len) { unsigned int i, j; for(i = 0; i < len + ((len % HEXDUMP_COLS) ? (HEXDUMP_COLS - len % HEXDUMP_COLS) : 0); i++) { /* print offset */ if(i % HEXDUMP_COLS == 0) { printf("0x%06x: ", i); } /* print hex data */ if(i < len) { printf("%02x ", 0xFF & ((char*)mem)[i]); } else /* end of block, just aligning for ASCII dump */ { printf(" "); } /* print ASCII dump */ if(i % HEXDUMP_COLS == (HEXDUMP_COLS - 1)) { for(j = i - (HEXDUMP_COLS - 1); j <= i; j++) { if(j >= len) /* end of block, not really printing */ { putchar(' '); } else if(isprint(((char*)mem)[j])) /* printable char */ { putchar(0xFF & ((char*)mem)[j]); } else /* other char */ { putchar('.'); } } putchar('\n'); } } } int main(void) { int i; if (iopl(3)) { err(1, "set iopl unsuccessfully\n"); return -1; } static char buf[0x40]; /* test ioport 0x40,0x41,0x42,0x43,0x44,0x45 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x40, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x41, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x42, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x43, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x44, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("mov $0x45, %rdx;"); asm volatile ("in %dx,%al;"); asm volatile ("stosb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); /* ins port 0x40 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x20, %rcx;"); asm volatile ("mov $0x40, %rdx;"); asm volatile ("rep insb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); /* ins port 0x43 */ memset(buf, 0xab, sizeof(buf)); asm volatile("push %rdi;"); asm volatile("mov %0, %%rdi;"::"q"(buf)); asm volatile ("mov $0x20, %rcx;"); asm volatile ("mov $0x43, %rdx;"); asm volatile ("rep insb;"); asm volatile ("pop %rdi;"); hexdump(buf, 0x40); printf("\n"); return 0; } The vcpu->arch.pio_data buffer is used by both in/out instrutions emulation w/o clear after using which results in some random datas are left over in the buffer. Guest reads port 0x43 will be ignored since it is write only, however, the function kernel_pio() can't distigush this ignore from successfully reads data from device's ioport. There is no new data fill the buffer from port 0x43, however, emulator_pio_in_emulated() will copy the stale data in the buffer to the guest unconditionally. This patch fixes it by clearing the buffer before in instruction emulation to avoid to grant guest the stale data in the buffer. In addition, string I/O is not supported for in kernel device. So there is no iteration to read ioport %RCX times for string I/O. The function kernel_pio() just reads one round, and then copy the io size * %RCX to the guest unconditionally, actually it copies the one round ioport data w/ other random datas which are left over in the vcpu->arch.pio_data buffer to the guest. This patch fixes it by introducing the string I/O support for in kernel device in order to grant the right ioport datas to the guest. Before the patch: 0x000000: fe 38 93 93 ff ff ab ab .8...... 0x000008: ab ab ab ab ab ab ab ab ........ 0x000010: ab ab ab ab ab ab ab ab ........ 0x000018: ab ab ab ab ab ab ab ab ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: f6 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 4d 51 30 30 ....MQ00 0x000018: 30 30 20 33 20 20 20 20 00 3 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: f6 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 4d 51 30 30 ....MQ00 0x000018: 30 30 20 33 20 20 20 20 00 3 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ After the patch: 0x000000: 1e 02 f8 00 ff ff ab ab ........ 0x000008: ab ab ab ab ab ab ab ab ........ 0x000010: ab ab ab ab ab ab ab ab ........ 0x000018: ab ab ab ab ab ab ab ab ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: d2 e2 d2 df d2 db d2 d7 ........ 0x000008: d2 d3 d2 cf d2 cb d2 c7 ........ 0x000010: d2 c4 d2 c0 d2 bc d2 b8 ........ 0x000018: d2 b4 d2 b0 d2 ac d2 a8 ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ 0x000000: 00 00 00 00 00 00 00 00 ........ 0x000008: 00 00 00 00 00 00 00 00 ........ 0x000010: 00 00 00 00 00 00 00 00 ........ 0x000018: 00 00 00 00 00 00 00 00 ........ 0x000020: ab ab ab ab ab ab ab ab ........ 0x000028: ab ab ab ab ab ab ab ab ........ 0x000030: ab ab ab ab ab ab ab ab ........ 0x000038: ab ab ab ab ab ab ab ab ........ Reported-by: Moguofang <moguofang@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Moguofang <moguofang@huawei.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-19KVM: x86: Fix potential preemption when get the current kvmclock timestampWanpeng Li
BUG: using __this_cpu_read() in preemptible [00000000] code: qemu-system-x86/2809 caller is __this_cpu_preempt_check+0x13/0x20 CPU: 2 PID: 2809 Comm: qemu-system-x86 Not tainted 4.11.0+ #13 Call Trace: dump_stack+0x99/0xce check_preemption_disabled+0xf5/0x100 __this_cpu_preempt_check+0x13/0x20 get_kvmclock_ns+0x6f/0x110 [kvm] get_time_ref_counter+0x5d/0x80 [kvm] kvm_hv_process_stimers+0x2a1/0x8a0 [kvm] ? kvm_hv_process_stimers+0x2a1/0x8a0 [kvm] ? kvm_arch_vcpu_ioctl_run+0xac9/0x1ce0 [kvm] kvm_arch_vcpu_ioctl_run+0x5bf/0x1ce0 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 RIP: 0033:0x7f9d164ed357 ? __this_cpu_preempt_check+0x13/0x20 This can be reproduced by run kvm-unit-tests/hyperv_stimer.flat w/ CONFIG_PREEMPT and CONFIG_DEBUG_PREEMPT enabled. Safe access to per-CPU data requires a couple of constraints, though: the thread working with the data cannot be preempted and it cannot be migrated while it manipulates per-CPU variables. If the thread is preempted, the thread that replaces it could try to work with the same variables; migration to another CPU could also cause confusion. However there is no preemption disable when reads host per-CPU tsc rate to calculate the current kvmclock timestamp. This patch fixes it by utilizing get_cpu/put_cpu pair to guarantee both __this_cpu_read() and rdtsc() are not preempted. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-05-19ASoC: rsnd: add HDMI output supportKuninori Morimoto
Renesas R-Car Gen3 can output HDMI sound if SSIU/SSI are connected to R-Car built-in HDMI device (R-Car Gen3 built-in HDMI device will be controlled by DRM/KMS driver). If SSIx was connected to HDMI0/1 on DT, SSI driver will detect it automatically by this patch. Note is that now Renesas R-Car sound driver is assuming that it is using OF-graph base simple card for HDMI sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: rsnd: add support graph base DT phase 2Kuninori Morimoto
To enable OF-graph base DT on rsnd driver, and to keep compatible previous normal sound card style, it need to support both "rcar_sound,dai" and "ports" (or "port") on DT. This patch parses both style. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: rsnd: add support graph base DT phase 1Kuninori Morimoto
To enable OF-graph base DT on rsnd driver, and to keep compatible previous normal sound card style, it need to support both "rcar_sound,dai" and "ports" (or "port") on DT. This patch modify rsnd_dai_of_node() to parse "rcar_sound,dai" and "ports" (or "port") as phase 1. It can detect graph base style, but do nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: stm32: Add full duplex support to i2solivier moysan
This patch allows to use i2s interface either as single audio path (rx or tx), or bidirectional audio path. This patch is added separately, as the driver does not follow recommended use of the interface, to support this configuration. Signed-off-by: olivier moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: stm32: Add I2S driverolivier moysan
Add I2S ASoC driver for STM32. This version of the driver supports only exclusive playback and capture interface. Signed-off-by: olivier moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: stm32: Document STM32 I2S bindingsolivier moysan
Add documentation of device tree bindings for STM32 SPI/I2S. Signed-off-by: olivier moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: simple-card: fix mic jack initializationStefan Agner
Initialize asoc_simple_card_init_mic with the correct struct asoc_simple_jack. Fixes: 9eac361877b3 ("ASoC: simple-card: add new asoc_simple_jack and use it") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: rsnd: don't call free_irq() on Parent SSIKuninori Morimoto
If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: cs35l35: Correctly handle 0 for bst_ipkCharles Keepax
Zero is a totally valid value to specify for the bst_ipk, as such we should append CS35L35_VALID_PDATA to ensure that it actually makes it into the register value. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: cs35l35: Add DT handling for InductorBrian Austin
Need to specify the inductor size in nH. This is a required property. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: cs35l35: Add Boost Inductor CalculationBrian Austin
Add the Boost Inductor parameters based off the size of the inductor on the HW setup Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: simple-scu-card: cleanup documentationKuninori Morimoto
simple-scu-card is almost same as simple-card. This is already explained in document. But simple-card and simple-scu-card both has same explanation for same property. This patch forward explantion to simple-card if possible to avoid duplication. This patch also cleanup DT binding example which is not good matching to simple-scu-card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: audio-graph-card: fix spelling mistake: "missmatch" -> "mismatch"Colin Ian King
Trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: audio-graph-card: tidyup return method from probe()Kuninori Morimoto
Current return method from probe() is very confusable. This patch tidyup it to normal return method Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: simple-scu-card: tidyup return method from probe()Kuninori Morimoto
Current return method from probe() is very confusable. This patch tidyup it to normal return method Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: simple-card: tidyup return method from probe()Kuninori Morimoto
Current return method from probe() is very confusable. This patch tidyup it to normal return method Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19ASoC: da7213: Update driver to use device_property* FW functionsAdam Thomson
The driver now supports ACPI based initialisation as well as DT and old pdata methods. However the FW data handling still uses DT specific calls to read firmware data (of_property*) so for ACPI based initialisation the FW data will only be set to default values. This patch updates the FW handling to use device_property* calls instead so that both ACPI and DT are handled as expected. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-19blktrace: fix integer parseShaohua Li
sscanf is a very poor way to parse integer. For example, I input "discard" for act_mask, it gets 0xd and completely messes up. Using correct API to do integer parse. This patch also makes attributes accept any base of integer. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-19xfs: avoid mount-time deadlock in CoW extent recoveryDarrick J. Wong
If a malicious user corrupts the refcount btree to cause a cycle between different levels of the tree, the next mount attempt will deadlock in the CoW recovery routine while grabbing buffer locks. We can use the ability to re-grab a buffer that was previous locked to a transaction to avoid deadlocks, so do that here. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-05-19i2c: designware: don't infer timings described by ACPI from clock rateArd Biesheuvel
Commit bd698d24b1b57 ("i2c: designware: Get selected speed mode sda-hold-time via ACPI") updated the logic that reads the timing parameters for various I2C bus rates from the DSDT, to only read the timing parameters for the currently selected mode. This causes a WARN_ON() splat on platforms that legally omit the clock frequency from the ACPI description, because in the new situation, the core I2C designware driver still accesses the fields in the driver struct that we no longer populate, and proceeds to calculate them from the clock frequency. Since the clock frequency is unspecified, the driver complains loudly using a WARN_ON(). So revert back to the old situation, where the struct fields for all timings are populated, but retain the new logic which chooses the SDA hold time from the timing mode that is currently in use. Fixes: bd698d24b1b57 ("i2c: designware: Get selected speed mode ...") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-19arm64: dts: rockchip: fix include referenceArnd Bergmann
The way we handle include paths for DT has changed a bit, which broke a file that had an unconventional way to reference a common header file: arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:47:10: fatal error: include/dt-bindings/input/linux-event-codes.h: No such file or directory This removes the leading "include/" from the path name, which fixes it. Fixes: d5d332d3f7e8 ("devicetree: Move include prefixes from arch to separate directory") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-19xfrm: fix state migration copy replay sequence numbersAntony Antony
During xfrm migration copy replay and preplay sequence numbers from the previous state. Here is a tcpdump output showing the problem. 10.0.10.46 is running vanilla kernel, is the IKE/IPsec responder. After the migration it sent wrong sequence number, reset to 1. The migration is from 10.0.0.52 to 10.0.0.53. IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7cf), length 136 IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7cf), length 136 IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d0), length 136 IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7d0), length 136 IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I] IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R] IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I] IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R] IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d1), length 136 NOTE: next sequence is wrong 0x1 IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x1), length 136 IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d2), length 136 IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x2), length 136 Signed-off-by: Antony Antony <antony@phenome.org> Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-19batman-adv: fix memory leak when dropping packet from other gatewayAndreas Pape
The skb must be released in the receive handler since b91a2543b4c1 ("batman-adv: Consume skb in receive handlers"). Just returning NET_RX_DROP will no longer automatically free the memory. This results in memory leaks when unicast packets from other backbones must be dropped because they share a common backbone. Fixes: 9e794b6bf4a2 ("batman-adv: drop unicast packets from other backbone gw") Signed-off-by: Andreas Pape <apape@phoenixcontact.com> [sven@narfation.org: adjust commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-05-19batman-adv: Fix rx packet/bytes stats on local ARP replySven Eckelmann
The stats are generated by batadv_interface_stats and must not be stored directly in the net_device stats member variable. The batadv_priv bat_counters information is assembled when ndo_get_stats is called. The stats previously stored in net_device::stats is then overwritten. The batman-adv counters must therefore be increased when an ARP packet is answered locally via the distributed arp table. Fixes: c384ea3ec930 ("batman-adv: Distributed ARP Table - add snooping functions for ARP messages") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-05-19selftests/powerpc: Fix TM resched DSCR test with some compilersMichael Ellerman
The tm-resched-dscr test has started failing sometimes, depending on what compiler it's built with, eg: test: tm_resched_dscr Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed. !! child died by signal 6 When it fails we see that the compiler doesn't initialise rv to 1 before entering the inline asm block. Although that's counter intuitive, it is allowed because we tell the compiler that the inline asm will write to rv (using "=r"), meaning the original value is irrelevant. Marking it as a read/write parameter would presumably work, but it seems simpler to fix it by setting the initial value of rv in the inline asm. Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Neuling <mikey@neuling.org>
2017-05-19drm/i915: set initialised only when init_context callback is NULLChuanxiao Dong
During execlist_context_deferred_alloc() we presumed that the context is uninitialised (we only just allocated the state object for it!) and chose to optimise away the later call to engine->init_context() if engine->init_context were NULL. This breaks with GVT's contexts that are marked as pre-initialised to avoid us annoyingly calling engine->init_context(). The fix is to not override ce->initialised if it is already true. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1494497262-24855-1-git-send-email-chuanxiao.dong@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 0d402a24df8c8160727af934d83293f3d44d31a3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-19phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()Wei Yongjun
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-05-19watchdog: bcm281xx: Fix use of uninitialized spinlock.Eric Anholt
The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730dc208 ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19iTCO_wdt: all versions count down twicePaolo Bonzini
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19firmware: ti_sci: fix strncat length checkArnd Bergmann
gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Cc: stable@vger.kernel.org Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-19ARM: remove duplicate 'const' annotations'Arnd Bergmann
gcc-7 warns about some declarations that are more 'const' than necessary: arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const ramc_ids[] __initconst = { arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const timer_of_match[] __initconst = { arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { The ones in arch/arm were apparently all introduced accidentally by one commit that correctly marked a lot of variables as __initconst. Fixes: 19c233b79d1a ("ARM: appropriate __init annotation for const data") Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-19Merge tag 'usb-serial-4.12-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.12-rc2 Here's a fix for a long-standing issue in the ftdi_sio driver that prevented unprivileged users from updating the low-latency flag, something which became apparent after a recent change that restored the older setting of not using low-latency mode by default. A run of sparse revealed a couple of endianness issues that are now fixed, and addressed is also a user-triggerable division-by-zero in io_ti when debugging is enabled. Finally there are some new device ids, including a simplification of how we deal with a couple of older Olimex JTAG adapters. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-05-19ovl: mark upper dir with type origin entries "impure"Amir Goldstein
When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19ovl: remove unused arg from ovl_lookup_temp()Miklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19ovl: handle rename when upper doesn't support xattrAmir Goldstein
On failure to set opaque/redirect xattr on rename, skip setting xattr and return -EXDEV. On failure to set opaque xattr when creating a new directory, -EIO is returned instead of -EOPNOTSUPP. Any failure to set those xattr will be recorded in super block and then setting any xattr on upper won't be attempted again. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19mmc: cavium-octeon: Use proper GPIO name for power controlDavid Daney
The devm_gpiod_get_optional() function appends a "-gpios" to the string passed to it, so if we want to find the "power-gpios" signal, we must pass "power" to this function. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: David Daney <david.daney@cavium.com> [jglauber@cavium.com: removed point after subject line] Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-19mmc: cavium-octeon: Fix interrupt enable codeDavid Daney
OCTEON SoCs with CIU3 do not have interrupt masking local to the MMC bus interface. Unfortunately, some even have a diagnostic register at the same address of the enable register, which causes the interrupts to fire immediately if stored to, thus breaking the driver. The proper action on these SoCs is not to touch this register. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: David Daney <david.daney@cavium.com> [jglauber@cavium.com: removed point after subject line] Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-19Merge tag 'omap-for-v4.12/fixes-v2-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature * tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19Merge tag 'imx-fixes-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.12: - A fix on GPCv2 power domain driver Kconfig which causes a build failure when CONFIG_PM is not set. - Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious PMIC interrupts from happening. - Remove board level OPP override for imx6sx-sdb to fix a boot crash seen on Rev.C boards. * tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: add PM dependency for IMX7_PM_DOMAINS ARM: dts: imx6sx-sdb: Remove OPP override ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19arm64: defconfig: enable options needed for QCom DB410c boardRob Herring
Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-19mmc: sdhci-xenon: kill xenon_clean_phy()Jisheng Zhang
Currently, the xenon_clean_phy() is only used for freeing phy_params. The phy_params is allocated by devm_kzalloc(), there's no need to free is explicitly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Acked-by: Hu Ziji <huziji@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
2017-05-18arm64: defconfig: sync with savedefconfigRob Herring
Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18ARM: configs: add a gemini defconfigLinus Walleij
It makes sense to have a stripped-down defconfig for just Gemini, as it is a pretty small platform used in NAS etc, and will use appended device tree. It is also quick to compile and test. Hopefully this defconfig can be a good base for distributions such as OpenWRT. I plan to add in the config options needed for the different variants of Gemini as we go along. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18Merge tag 'arm-soc/for-4.12/drivers-fixes' of ↵Olof Johansson
http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom SoC drivers fixes for 4.12, please pull the following: - Florian removes the duplicate compatible string matched by the SUN_TOP_CTRL driver and instead uses the correct one for 7435 * tag 'arm-soc/for-4.12/drivers-fixes' of http://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Correctly match 7435 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18Merge tag 'arm-soc/for-4.12/devicetree-fixes' of ↵Olof Johansson
http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.12, please pull the following: - Baruch provides several fixes for the Raspberry Pi (BCM2835) Device Tree source include file: uart0 pinctrl node names, pin number for i2c0, uart0 rts/cts pins and invalid uart1 pin, missing numbers for ethernet aliases * tag 'arm-soc/for-4.12/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: bcm2835: add index to the ethernet alias ARM: dts: bcm2835: fix uart0/uart1 pins ARM: dts: bcm2835: fix i2c0 pins ARM: dts: bcm2835: fix uart0 pinctrl node names Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18devicetree: Move include prefixes from arch to separate directoryOlof Johansson
We use a directory under arch/$ARCH/boot/dts as an include path that has links outside of the subtree to find dt-bindings from under include/dt-bindings. That's been working well, but new DT architectures haven't been adding them by default. Recently there's been a desire to share some of the DT material between arm and arm64, which originally caused developers to create symlinks or relative includes between the subtrees. This isn't ideal -- it breaks if the DT files aren't stored in the exact same hierarchy as the kernel tree, and generally it's just icky. As a somewhat cleaner solution we decided to add a $ARCH/ prefix link once, and allow DTS files to reference dtsi (and dts) files in other architectures that way. Original approach was to create these links under each architecture, but it lead to the problem of recursive symlinks. As a remedy, move the include link directories out of the architecture trees into a common location. At the same time, they can now share one directory and one dt-bindings/ link as well. Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks') Reported-by: Russell King <linux@armlinux.org.uk> Reported-by: Omar Sandoval <osandov@osandov.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arch <linux-arch@vger.kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18Merge tag 'v4.12-rc1' into fixesOlof Johansson
We've received a few fixes branches with -rc1 as base, but our contents was still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on hat was actually merged. Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-22 17:27:29 +0000