summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-11KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform checkPrarit Bhargava
While debugging I noticed that unlike all the other hypervisor code in the kernel, kvm does not have an entry for x86_hyper which is used in detect_hypervisor_platform() which results in a nice printk in the syslog. This is only really a stub function but it does make kvm more consistent with the other hypervisors. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marcelo Tostatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11net/mlx4_core: Free ICM table in case of errorDotan Barak
In mlx4_init_icm_table(), free the allocated table if we failed to allocate memory to its entries. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11IB/cm: Destroy idr as part of the module init error flowDotan Barak
Clean the idr as part of the error flow since it is a resource too. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11mlx4_core: Remove double function declarationsDotan Barak
Spotted four duplicate declarations in icm.h, remove them. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11IB/mlx4: Fill the masked_atomic_cap attribute in query deviceDotan Barak
When the user queries for device capabilities, fill in the masked_atomic_cap attribute with the real support level of atomic capabilities instead of using a hard coded value. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11IB/mthca: Fill in sq_sig_type in query QPDotan Barak
The query QP code was didn't fill that attribute, do that. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11IB/mthca: Warning about event for non-existent QPs should show event typeDotan Barak
Events received for non-existent QPs should generate a warning that includes the event type that was received. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11Merge branch 'for-upstream-master' of git://github.com/agraf/linux-2.6Avi Kivity
PPC fix from Alex Graf: "It contains an important bug fix which can lead to guest freezes when using PAPR guests with PR KVM." * 'for-upstream-master' of git://github.com/agraf/linux-2.6: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: PPC: Critical interrupt emulation supportBharat Bhushan
rfci instruction and CSRR0/1 registers are emulated. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guestsMihai Caraman
tlbilxva emulation was using an u32 variable for guest effective address. Replace it with gva_t type to handle 64-bit guests. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11KVM: PPC64: booke: Set interrupt computation mode for 64-bit hostMihai Caraman
64-bit host needs to remain in 64-bit mode when an exception take place. Set interrupt computaion mode in EPCR register. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11KVM: PPC: bookehv: Add ESR flag to Data Storage InterruptMihai Caraman
ESR register is required by Data Storage Interrupt handling code. Add the specific flag to the interrupt handler. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11KVM: PPC: bookehv64: Add support for std/ld emulation.Varun Sethi
Add support for std/ld emulation. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11booke: Added crit/mc exception handler for e500v2Bharat Bhushan
Watchdog is taken at critical exception level. So this patch is tested with host watchdog exception happening when guest is running. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11booke/bookehv: Add host crit-watchdog exception supportBharat Bhushan
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11via: Remove bogus if checkAlan Cox
Reported-by: <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44331 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-11powerpc/kvm: Fix "PR" KVM implementation of H_CEDEBenjamin Herrenschmidt
H_CEDE should enable the vcpu's MSR:EE bit. It does on "HV" KVM (it's burried in the assembly code though) and as far as I can tell, qemu does it as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-11regulator: s2mps11: Add samsung s2mps11 regulator driverSangbeom Kim
This patch add Samsung S2MPS11 regulator driver. The S2MPS11 can support 10 Bucks and 38 LDOs and RTC. Especially, S2MPS11 is designed for high performance Samsung application processor. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11KVM: MMU: document mmu-lock and fast page faultXiao Guangrong
Document fast page fault and mmu-lock in locking.txt Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: fix kvm_mmu_pagetable_walk tracepointXiao Guangrong
The P bit of page fault error code is missed in this tracepoint, fix it by passing the full error code Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: trace fast page faultXiao Guangrong
To see what happen on this path and help us to optimize it Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: fast path of handling guest page faultXiao Guangrong
If the the present bit of page fault error code is set, it indicates the shadow page is populated on all levels, it means what we do is only modify the access bit which can be done out of mmu-lock Currently, in order to simplify the code, we only fix the page fault caused by write-protect on the fast path Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: introduce SPTE_MMU_WRITEABLE bitXiao Guangrong
This bit indicates whether the spte can be writable on MMU, that means the corresponding gpte is writable and the corresponding gfn is not protected by shadow page protection In the later path, SPTE_MMU_WRITEABLE will indicates whether the spte can be locklessly updated Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: fold tlb flush judgement into mmu_spte_updateXiao Guangrong
mmu_spte_update() is the common function, we can easily audit the path Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: VMX: export PFEC.P bit on eptXiao Guangrong
Export the present bit of page fault error code, the later patch will use it Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: cleanup spte_write_protectXiao Guangrong
Use __drop_large_spte to cleanup this function and comment spte_write_protect Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: abstract spte write-protectXiao Guangrong
Introduce a common function to abstract spte write-protect to cleanup the code Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11KVM: MMU: return bool in __rmap_write_protectXiao Guangrong
The reture value of __rmap_write_protect is either 1 or 0, use true/false instead of these Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-11Bluetooth: debug: Print amp_mgr refcntAndrei Emeltchenko
Improve debug output. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11Bluetooth: debug: Print l2cap_chan refcountAndrei Emeltchenko
Improve debug output. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11Bluetooth: debug: Use standard hex object specifiers in hci_eventAndrei Emeltchenko
To help debugging printed hex object use standard bluetooth specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x; print manufacturer id and handle in hex instead of int; print opcode always in 0x%4.4x format; status in 0x%2.2x. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11powerpc/e500: add paravirt QEMU platformScott Wood
This gives the kernel a paravirtualized machine to target, without requiring both sides to pretend to be targeting a specific board that likely has little to do with the host in KVM scenarios. This avoids the need to add new boards to QEMU just to be able to run KVM on new CPUs. As this is the first platform that can run with either e500v2 or e500mc, CONFIG_PPC_E500MC is now a legitimately user configurable option, so add a help text. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/mpc85xx_ds: convert to unified PCI initScott Wood
Similar to how the primary PCI bridge is identified by looking for an isa subnode, we determine whether to apply uli exclusions by looking for a uli subnode. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/fsl-pci: get PCI init out of board filesScott Wood
As an alternative incremental starting point to Jia Hongtao's patchset, get the FSL PCI init out of the board files, but do not yet convert to a platform driver. Rather than having each board supply a magic register offset for determining the "primary" bus, we look for which PCI host bridge contains an ISA node within its subtree. If there is no ISA node, normally that would mean there is no primary bus, but until certain bugs are fixed we arbitrarily designate a primary in this case. Conversion to a platform driver and related improvements can happen after this, as the ordering issues are sorted out. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/85xx: Update corenet64_smp_defconfigShengzhou Liu
Enable USB, MMC, SATA, LBC, MTD, NAND, SPI, PCIe, EDAC, VFAT, NFS, etc. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/85xx: Update corenet32_smp_defconfigShengzhou Liu
- Enable NAND support - Enable CONFIG_PCI_MSI and CONFIG_MMC_SDHCI_OF Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/85xx: Rename P1021RDB-PC device trees to be consistentXu Jiucheng
The board is really P1021RDB-PC, so rename from p1021rdb.* to p1021rdb-pc.* Signed-off-by: Xu Jiucheng <Jiucheng.Xu@freescale.com> Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11powerpc/watchdog: move booke watchdog param related code to setup-common.cShaohui Xie
Currently, BOOKE watchdog code for checking "wdt" and "wdt_period" is in setup_32.c, it cannot be used in 64-bit, so move it to a common place setup-common.c, which will be shared by 32-bit and 64-bit. Also, replace the simple_strtoul with kstrtol. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11USB: Add a sysfs file to show LTM capabilities.Sarah Sharp
USB 3.0 devices can optionally support Latency Tolerance Messaging (LTM). Add a new sysfs file in the device directory to show whether a device is LTM capable. This file will be present for both USB 2.0 and USB 3.0 devices. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-07-11USB: Enable Latency Tolerance Messaging (LTM).Sarah Sharp
USB 3.0 devices may optionally support a new feature called Latency Tolerance Messaging. If both the xHCI host controller and the device support LTM, it should be turned on in order to give the system hardware a better clue about the latency tolerance values of its PCI devices. Once a Set Feature request to enable LTM is received, the USB 3.0 device will begin to send LTM updates as its buffers fill or empty, and it can tolerate more or less latency. The USB 3.0 spec, section C.4.2 says that LTM should be disabled just before the device is placed into suspend. Then the device will send an updated LTM notification, so that the system doesn't think it should remain in an active state in order to satisfy the latency requirements of the suspended device. The Set and Clear Feature LTM enable command can only be sent to a configured device. The device will respond with an error if that command is sent while it is in the Default or Addressed state. Make sure to check udev->actconfig in usb_enable_ltm() and usb_disable_ltm(), and don't send those commands when the device is unconfigured. LTM should be enabled once a new configuration is installed in usb_set_configuration(). If we end up sending duplicate Set Feature LTM Enable commands on a switch from one installed configuration to another configuration, that should be harmless. Make sure that LTM is disabled before the device is unconfigured in usb_disable_device(). If no drivers are bound to the device, it doesn't make sense to allow the device to control the latency tolerance of the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-07-11xhci: Export Latency Tolerance Messaging capabilities.Sarah Sharp
Some xHCI host controllers may have optional support for Latency Tolerance Messaging (LTM). This allows USB 3.0 devices that support LTM to pass information about how much latency they can tolerate to the xHC. A PCI xHCI host will use this information to update the PCI Latency Tolerance Request (LTR) info. The goal of this is to gather latency information for the system, to enable hardware-driven C states, and the shutting down of PLLs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-07-11USB: Remove unused LPM variable.Sarah Sharp
hub_initiated_lpm_disable_count is not used by any code, so remove it. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-07-11USB: Fix LPM disable count mismatch on driver unbind.Sarah Sharp
When a user runs `echo 0 > bConfigurationValue` for a USB 3.0 device, usb_disable_device() is called. This function disables all drivers, deallocates interfaces, and sets the device configuration value to 0 (unconfigured). With the new scheme to ensure that unconfigured devices have LPM disabled, usb_disable_device() must call usb_unlocked_disable_lpm() once it unconfigures the device. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-07-11USB: Disable LPM while the device is unconfigured.Sarah Sharp
The USB 3.0 Set/Clear Feature U1/U2 Enable cannot be sent to a device in the Default or Addressed state. It can only be sent to a configured device. Change the USB core to initialize the LPM disable count to 1 (disabled), which reflects this limitation. Change usb_set_configuration() to ensure that if the device is unconfigured on entry, usb_lpm_disable() is not called. This avoids sending the Clear Feature U1/U2 when the device is in the Addressed state. When usb_set_configuration() exits with a successfully installed configuration, usb_lpm_enable() will be called. Once the new configuration is installed, make sure usb_set_configuration() only calls usb_enable_lpm() if the device moved to the Configured state. If we have unconfigured the device by sending it a Set Configuration for config 0, don't enable LPM. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-07-11USB: Fix LPM disable/enable during device reset.Sarah Sharp
The USB 3.0 specification says that sending a Set Feature or Clear Feature for U1/U2 Enable is not a valid request when the device is in the Default or Addressed state. It is only valid when the device is in the Configured state. The original LPM patch attempted to disable LPM after the device had been reset by hub_port_init(), before it had the configuration reinstalled. The TI hub I tested with did not fail the Clear Feature U1/U2 Enable request that khubd sent while it was in the addressed state, which is why I didn't catch it. Move the LPM disable before the device reset, so that we can send the Clear Feature U1/U2 Enable successfully, and balance the LPM disable count. Also delete any calls to usb_enable_lpm() on error paths that lead to re-enumeration. The calls will fail because the device isn't configured, and it's not useful to balance the LPM disable count because the usb_device is about to be destroyed before re-enumeration. Fix the early exit path ("done" label) to call usb_enable_lpm() to balance the LPM disable count. Note that calling usb_reset_and_verify_device() with an unconfigured device may fail on the first call to usb_disable_lpm(). That's because the LPM disable count is initialized to 0 (LPM enabled), and usb_disable_lpm() will attempt to send a Clear Feature U1/U2 request to a device in the Addressed state. The next patch will fix that. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-07-11Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/socArnd Bergmann
From Sascha Hauer <s.hauer@pengutronix.de>: ARM i.MX SoC updates for 3.6 * tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: imx: fix mx51 ehci setup errors ARM: imx: make ehci power/oc polarities configurable ARM: imx: add rtc support to mx35_3ds ARM: imx: enable support for mx35 rtc ARM: imx: fix i.MX35 CPU architecture ARM: i.MX51 iomux: added missing pin definitions Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-11Merge tag 'v3.5-rc6' into next/socArnd Bergmann
Linux 3.5-rc6 Dependency for imx/soc changes
2012-07-11iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attributeJoerg Roedel
Implement the attribute for the Samsung Exynos IOMMU driver. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-07-11iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attributeHiroshi DOYU
Implement the attribute for the Tegra IOMMU drivers. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-07-11PM / Domains: Replace plain integer with NULL pointer in domain.c fileSachin Kamat
Fixes the following sparse warning: drivers/base/power/domain.c:1679:55: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit (git 2.34.1) at 2025-09-23 00:47:20 +0000