summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-28io_uring: always delete double poll wait entry on matchJens Axboe
syzbot reports a crash with tty polling, which is using the double poll handling: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline] RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845 Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00 RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004 RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048 RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60 R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004 R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004 FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __wake_up_common+0x147/0x650 kernel/sched/wait.c:93 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123 tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735 __tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625 __tty_hangup drivers/tty/tty_io.c:575 [inline] tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698 pty_close+0x3f5/0x550 drivers/tty/pty.c:79 tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:165 [inline] exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192 syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x401210 which is due to a failure in removing the double poll wait entry if we hit a wakeup match. This can cause multiple invocations of the wakeup, which isn't safe. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28nl80211: extend support to config spatial reuse parameter setRajkumar Manoharan
Allow the user to configure below Spatial Reuse Parameter Set element. * Non-SRG OBSS PD Max Offset * SRG BSS Color Bitmap * SRG Partial BSSID Bitmap Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1601278091-20313-2-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Support not iterating over not-sdata-in-driver ifacesBen Greear
Allow drivers to request that interface-iterator does NOT iterate over interfaces that are not sdata-in-driver. This will allow us to fix crashes in ath10k (and possibly other drivers). To summarize Johannes' explanation: Consider add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 If you apply this scenario to a restart, which ought to be functionally equivalent to the normal startup, just compressed in time, you're basically saying that today you get add interface wlan0 add interface wlan1 iterate active interfaces -> wlan0 wlan1 wlan2 << problem here add interface wlan2 iterate active interfaces -> wlan0 wlan1 wlan2 which yeah, totally seems wrong. But fixing that to be add interface wlan0 add interface wlan1 iterate active interfaces -> <nothing> add interface wlan2 iterate active interfaces -> <nothing> (or maybe -> wlan0 wlan1 wlan2 if the reconfig already completed) This is also at least somewhat wrong, but better to not iterate over something that exists in the driver than iterate over something that does not. Originally the first issue was causing crashes in testing with lots of station vdevs on an ath10k radio, combined with firmware crashing. I ran with a similar patch for years with no obvious bad results, including significant testing with ath9k and ath10k. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200922191957.25257-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211: fix OBSS PD min and max offset validationRajkumar Manoharan
The SRG min and max offset won't present when SRG Information Present of SR control field of Spatial Reuse Parameter Set element set to 0. Per spec. IEEE802.11ax D7.0, SRG OBSS PD Min Offset ≤ SRG OBSS PD Max Offset. Hence fix the constrain check to allow same values in both offset and also call appropriate nla_get function to read the values. Fixes: 796e90f42b7e ("cfg80211: add support for parsing OBBS_PD attributes") Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1601278091-20313-1-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfdMaxime Ripard
The current binding for the RPi firmware uses the simple-bus compatible as a fallback to benefit from its automatic probing of child nodes. However, simple-bus also comes with some constraints, like having the ranges, our case. Let's switch to simple-mfd that provides the same probing logic without those constraints. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech Signed-off-by: Rob Herring <robh@kernel.org>
2020-09-28mac80211: fix some more kernel-doc in meshJohannes Berg
Add a few more missing kernel-doc annotations in mesh code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200928135129.6409460c28b7.I43657d0b70398723e59e4e724f56af88af0fec7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: regulatory: remove a bogus initializationDan Carpenter
The the __freq_reg_info() never returns NULL and the callers don't check for NULL. This initialization to set "reg_rule = NULL;" is just there to make GCC happy but it's not required in current GCCs. The problem is that Smatch sees the initialization and concludes that this function can return NULL so it complains that the callers are not checking for it. Smatch used to be able to parse this correctly but we recently changed the code from: - for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) { + for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) { Originally Smatch used to understand that this code always iterates through the loop once, but the change from "MHZ_TO_KHZ(20)" to "MHZ_TO_KHZ(bws[i])" is too complicated for Smatch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200923084203.GC1454948@mwanda Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix regression in sta connection monitorFelix Fietkau
When a frame was acked and probe frames were sent, the connection monitoring needs to be reset, otherwise it will keep probing until the connection is considered dead, even though frames have been acked in the mean time. Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200927105605.97954-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211_hwsim: indicate support for S1GThomas Pedersen
Advertise S1G Capabilities and channels to mac80211. Requires a few fixups to account for missing sband->bitrates, and a custom regulatory db to actually enable the S1G channels. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-18-thomas@adapt-ip.com [small code cleanup] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211_hwsim: write TSF timestamp correctly to S1G beaconThomas Pedersen
S1G beacons are different from normal management beacons, so write the timestamp to the correct location there. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-17-thomas@adapt-ip.com [rewrite commit message that was not useful after patch reordering] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211: include frequency offset in survey infoThomas Pedersen
Recently channels gained a potential frequency offset, so include this in the per-channel survey info. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-16-thomas@adapt-ip.com [add the offset only if non-zero] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: receive and process S1G beaconsThomas Pedersen
S1G beacons are 802.11 Extension Frames, so the fixed header part differs from regular beacons. Add a handler to process S1G beacons and abstract out the fetching of BSSID and element start locations in the beacon body handler. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com [don't rename, small coding style cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: avoid rate init for S1G bandThomas Pedersen
minstrel_ht is confused by the lack of sband->bitrates, and S1G will likely require a unique RC algorithm, so avoid rate init for now if STA is on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-13-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: handle S1G low ratesThomas Pedersen
S1G doesn't have legacy (sband->bitrates) rates, only MCS. For now, just send a frame at MCS 0 if a low rate is requested. Note we also redefine (since we're out of TX flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G MCS. This is probably OK as VHT MCS is not valid on S1G band and vice versa. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-12-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: don't calculate duration for S1GThomas Pedersen
For now just skip the duration calculation for frames transmitted on the S1G band and avoid a warning. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-11-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: handle Association Response from S1G STAThomas Pedersen
The sending STA type is implicit based on beacon or probe response content. If sending STA was an S1G STA, adjust the Information Element location accordingly. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-9-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: convert S1G beacon to scan resultsThomas Pedersen
This commit finds the correct offset for Information Elements in S1G beacon frames so they can be reported in scan results. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: parse S1G Operation element for BSS channelThomas Pedersen
Extract the BSS primary channel from the S1G Operation element. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-7-thomas@adapt-ip.com [remove the goto bits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28cfg80211: convert S1G beacon to scan resultsThomas Pedersen
The S1G beacon is an extension frame as opposed to management frame for the regular beacon. This means we may have to occasionally cast the frame buffer to a different header type. Luckily this isn't too bad as scan results mostly only care about the IEs. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G STA capabilitiesThomas Pedersen
Include the S1G Capabilities element in an association request, and support the cfg80211 capability overrides. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com [pass skb to ieee80211_add_s1g_capab_ie(), small code style edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211: support S1G capability overrides in assocThomas Pedersen
NL80211_ATTR_S1G_CAPABILITY can be passed along with NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE to indicate S1G capabilities which should override the hardware capabilities in eg. the association request. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-4-thomas@adapt-ip.com [johannes: always require both attributes together, commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: s1g: choose scanning width based on frequencyThomas Pedersen
An S1G BSS can beacon at either 1 or 2 MHz and the channel width is unique to a given frequency. Ignore scan channel width for now and use the allowed channel width. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: get correct default channel width for S1GThomas Pedersen
When deleting a channel context, mac80211 would assing NL80211_CHAN_WIDTH_20_NOHT as the default channel width. This is wrong in S1G however, so instead get the allowed channel width for a given channel. Fixes eg. configuring strange (20Mhz) width during a scan on the S1G band. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-2-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28wireless: radiotap: fix some kernel-docJohannes Berg
The vendor namespaces argument isn't described here, add it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200924192511.2bf5cc761d3a.I9b4579ab3eebe3d7889b59eea8fa50d683611bab@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix some missing kernel-docJohannes Berg
Two parameters are not described, add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200924192511.21411377b0a8.I1add147d782a3bf38287bde412dc98f69323c732@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211_hwsim: fix typo in kernel-docJohannes Berg
There's a stray _ in the kernel doc, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200924192511.6a344ebd8d65.Ie95a47db5887b8d2faa8ca2df474a955a376c4c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: Inform AP when returning operating channelLoic Poulain
Because we can miss AP wakeup (beacon) while scanning other channels, it's better go into wakeup state and inform the AP of that upon returning to the operating channel, rather than staying asleep and waiting for the next TIM indicating traffic for us. This saves precious time, especially when we only have 200ms inter- scan period for monitoring the active connection. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593420923-26668-1-git-send-email-loic.poulain@linaro.org [rewrite commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28gpio: amd-fch: correct logic of GPIO_LINE_DIRECTIONEd Wildgoose
The original commit appears to have the logic reversed in amd_fch_gpio_get_direction. Also confirmed by observing the value of "direction" in the sys tree. Signed-off-by: Ed Wildgoose <lists@wildgooses.com> Fixes: e09d168f13f0 ("gpio: AMD G-Series PCH gpio driver") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-28mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS modelsHans de Goede
Commit bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models because of it being broken due to what is believed to be a bug in the BIOS. It seems that the BIOS of some IRBIS models, including the IRBIS NB111 model has the same issue, so disable command queuing there too. Fixes: bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397 Reported-and-tested-by: RussianNeuroMancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200927104821.5676-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28memstick: Skip allocating card when removing hostKai-Heng Feng
After commit 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management"), removing module rtsx_usb_ms will be stuck. The deadlock is caused by powering on and powering off at the same time, the former one is when memstick_check() is flushed, and the later is called by memstick_remove_host(). Soe let's skip allocating card to prevent this issue. Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28Merge 'xfrm: Add compat layer'Steffen Klassert
Dmitry Safonov says: ==================== Changes since v2: - added struct xfrm_translator as API to register xfrm_compat.ko with xfrm_state.ko. This allows compilation of translator as a loadable module - fixed indention and collected reviewed-by (Johannes Berg) - moved boilerplate from commit messages into cover-letter (Steffen Klassert) - found on KASAN build and fixed non-initialised stack variable usage in the translator The resulting v2/v3 diff can be found here: https://gist.github.com/0x7f454c46/8f68311dfa1f240959fdbe7c77ed2259 Patches as a .git branch: https://github.com/0x7f454c46/linux/tree/xfrm-compat-v3 Changes since v1: - reworked patches set to use translator - separated the compat layer into xfrm_compat.c, compiled under XFRM_USER_COMPAT config - 32-bit messages now being sent in frag_list (like wext-core does) - instead of __packed add compat_u64 members in compat structures - selftest reworked to kselftest lib API - added netlink dump testing to the selftest XFRM is disabled for compatible users because of the UABI difference. The difference is in structures paddings and in the result the size of netlink messages differ. Possibility for compatible application to manage xfrm tunnels was disabled by: the commmit 19d7df69fdb2 ("xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems") and the commit 74005991b78a ("xfrm: Do not parse 32bits compiled xfrm netlink msg on 64bits host"). This is my second attempt to resolve the xfrm/compat problem by adding the 64=>32 and 32=>64 bit translators those non-visibly to a user provide translation between compatible user and kernel. Previous attempt was to interrupt the message ABI according to a syscall by xfrm_user, which resulted in over-complicated code [1]. Florian Westphal provided the idea of translator and some draft patches in the discussion. In these patches, his idea is reused and some of his initial code is also present. There were a couple of attempts to solve xfrm compat problem: https://lkml.org/lkml/2017/1/20/733 https://patchwork.ozlabs.org/patch/44600/ http://netdev.vger.kernel.narkive.com/2Gesykj6/patch-net-next-xfrm-correctly-parse-netlink-msg-from-32bits-ip-command-on-64bits-host All the discussions end in the conclusion that xfrm should have a full compatible layer to correctly work with 32-bit applications on 64-bit kernels: https://lkml.org/lkml/2017/1/23/413 https://patchwork.ozlabs.org/patch/433279/ In some recent lkml discussion, Linus said that it's worth to fix this problem and not giving people an excuse to stay on 32-bit kernel: https://lkml.org/lkml/2018/2/13/752 There is also an selftest for ipsec tunnels. It doesn't depend on any library and compat version can be easy build with: make CFLAGS=-m32 net/ipsec [1]: https://lkml.kernel.org/r/20180726023144.31066-1-dima@arista.com ==================== Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-09-28net: vlan: Fixed signedness in vlan_group_prealloc_vid()Florian Fainelli
After commit d0186842ec5f ("net: vlan: Avoid using BUG() in vlan_proto_idx()"), vlan_proto_idx() was changed to return a signed integer, however one of its called: vlan_group_prealloc_vid() was still using an unsigned integer for its return value, fix that. Fixes: d0186842ec5f ("net: vlan: Avoid using BUG() in vlan_proto_idx()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 supportRocky Liao
This patch add support for WCN6855 i.e. patch and nvm download support. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e600 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-27Linux 5.9-rc7v5.9-rc7Linus Torvalds
2020-09-27r8169: fix RTL8168f/RTL8411 EPHY configHeiner Kallweit
Mistakenly bit 2 was set instead of bit 3 as in the vendor driver. Fixes: a7a92cf81589 ("r8169: sync PCIe PHY init with vendor driver 8.047.01") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27Merge branch 'bnxt_en-Update-for-net-next'David S. Miller
Michael Chan says: ==================== bnxt_en: Update for net-next. This patch series adds 2 main features to the bnxt_en driver: 200G link speed support and FEC support with some refactoring of the link speed logic. The firmware interface is updated to have proper support for these 2 features. The ethtool preset max channel value is also adjusted properly to account for XDP and TCs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Improve preset max value for ethtool -l.Michael Chan
The current logic that calculates the preset maximum value for combined channel does not take into account the rings used for XDP and mqprio TCs. Each of these features will reduce the number of TX rings. Add the logic to divide the TX rings accordingly based on whether the device is currently in XDP mode and whether TCs are in use. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Implement ethtool set_fec_param() method.Michael Chan
This feature allows the user to set the different FEC modes on the NIC port. Any new setting will take effect immediately after a link toggle. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Report Active FEC encoding during link up.Michael Chan
The current code is reporting the FEC configured settings during link up. Change it to report the more useful active FEC encoding that may be negotiated or auto detected. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Report FEC settings to ethtool.Michael Chan
Implement .get_fecparam() method to report the configured and active FEC settings. Also report the supported and advertised FEC settings to the .get_link_ksettings() method. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: avoid link reset if speed is not changedEdwin Peer
PORT_PHY_CONFIG is always sent with REQ_FLAGS_RESET_PHY set. This flag must be set in order for the firmware to institute the requested PHY change immediately, but it results in a link flap. This is unnecessary and results in an improved user experience if the PHY reconfiguration is avoided when the user requested speed does not constitute a change. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Handle ethernet link being disabled by firmware.Michael Chan
On some 200G dual port NICs, if one port is configured to 200G, firmware will disable the ethernet link on the other port. Firmware will send notification to the driver for the disabled port when this happens. Define a new field in the link_info structure to keep track of this state. The new phy_state field replaces the unused loop_back field. Log a message when the phy_state changes state. In the disabled state, disallow any PHY configurations on the disabled port as the firmware will fail all calls to configure the PHY in this state. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: ethtool: support PAM4 link speeds up to 200GEdwin Peer
Add ethtool PAM4 link modes for: 50000baseCR_Full 100000baseCR2_Full 200000baseCR4_Full Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: add basic infrastructure to support PAM4 link speedsEdwin Peer
The firmware interface has added support for new link speeds using PAM4 modulation. Expand the bnxt_link_info structure to closely mirror the new firmware structures. Add logic to copy the PAM4 capabilities and settings from the firmware. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: refactor bnxt_get_fw_speed()Edwin Peer
It will be necessary to update more than one field in the link_info structure when PAM4 speeds are added in a later patch. Instead of merely translating ethtool speed values to firmware speed values, change the responsiblity of this function to update all the necessary link_info fields required to force the speed change to the desired ethtool value. This also reduces code duplication somewhat at the two call sites, which otherwise both have to independently update link_info fields to turn off auto negotiation advertisements. Also use the appropriate REQ_FORCE_LINK_SPEED definitions. These happen to have the same values, but req_link_speed is utilimately passed as force_link_speed in HWRM_PORT_PHY_CFG which is not defined in terms of REQ_AUTO_LINK_SPEED. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: refactor code to limit speed advertisingEdwin Peer
Extract the code for determining an advertised speed is no longer supported into a separate function. This will avoid some code duplication in a later patch when supporting PAM4 speeds, since these speeds are specified in a separate field. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27bnxt_en: Update firmware interface spec to 1.10.1.65.Michael Chan
The main changes include FEC, ECN statistics, HWRM_PORT_PHY_QCFG response size reduction, and a new counter added to ctx_hw_stats_ext struct to support the new 58818 chip. The ctx_hw_stats_ext structure is now the superset supporting the new 58818 chips and the prior P5 chips. Add a new flag to identify the new chip and use constants for the chip specific ring statistics sizes instead of the size of the structure. Because the HWRM_PORT_PHY_QCFG response structure size has shrunk back to 96 bytes, the workaround added earlier to limit the size of this message for forwarding to the VF can be removed. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 16:12:03 +0000