summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-15ARM: mach-shmobile: ap4evb SDHI0 platform data V2Magnus Damm
Add SDHI0 platform data for the AP4EVB board V2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7372 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7372 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7377 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7377 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: sh7367 SDHI vector mergeMagnus Damm
Merge the SDHI vectors for sh7367 using the recently merged INTC force_enable/disable feature. With this in place SDHI hotplug is supported using the drivers sh_mobile_sdhi and tmio_mmc. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G4EVM KEYSC platform dataNISHIMOTO Hiroki
This patch adds KEYSC platform data for the G4EVM board. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15mtd: enable sh_flctl on SH-Mobile ARMMagnus Damm
Update the Kconfig entry for the sh_flctl driver to enable build on SH-Mobile ARM platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G3EVM FLCTL platform dataMagnus Damm
This patch adds FLCTL platform data for the G3EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15ARM: mach-shmobile: G3EVM KEYSC platform dataMagnus Damm
This patch adds KEYSC platform data for the G3EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-14Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown
'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
2010-03-15drm/radeon: collect r100 asic related declarations in radeon_asic.hDaniel Vetter
This just an example to show what radeon_asic.h might be good for. Before Jerome kills it ;) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: include radeon_asic.h in the asic specific filesDaniel Vetter
In essence this creates a home for all asic specific declarations in radeon_asic.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: unconfuse return value of radeon_asic->clear_surface_regDaniel Vetter
No one cares about it, so set it to void. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: move asic structs to radeon_asic.cDaniel Vetter
With these static structs gone, radeon_asic.h is a real header file and can be used as such. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon: create radeon_asic.cDaniel Vetter
And move asic init plus a few related functions from radeon_device.c to it. This file will hold all the asic structures in the future, but atm they're still stuck in radeon_asic.h. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-14ACPI: processor: push file static MADT pointer into internal map_madt_entry()Alex Chiang
There's no real need for a pointer to the MADT to be global. The only function who uses it is map_madt_entry. This allows us to remove some more ugly #ifdefs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_lsapic_id()Alex Chiang
Un-nest the if statements for readability. Remove comments that re-state the obvious. Change the control flow so that we no longer need a temp variable. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_x2apic_id()Alex Chiang
Untangle the nested if conditions to make this function look more similar to the other map_*apic_id() functions. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: refactor internal map_lapic_id()Alex Chiang
Untangle the if() statement a little for readability. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: driver doesn't need to evaluate _PDCAlex Chiang
Now that the early _PDC evaluation path knows how to correctly evaluate _PDC on only physically present processors, there's no need for the processor driver to evaluate it later when it loads. To cover the hotplug case, push _PDC evaluation down into the hotplug paths. Cc: x86@kernel.org Cc: Tony Luck <tony.luck@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: remove early _PDC optin quirksAlex Chiang
Now that we check for physically present processors before blindly evaluating _PDC, we no longer need to maintain a DMI opt-in table nor a kernel param. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: add internal processor_physically_present()Alex Chiang
Detect if a processor is physically present before evaluating _PDC. We want this because some BIOS will provide a _PDC even for processors that are not present. These bogus _PDC methods then attempt to load non-existent tables, which causes problems. Avoid those bogus landmines. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: move acpi_get_cpuid into processor_core.cAlex Chiang
Enumerating processors (via MADT/_MAT) belongs in the processor core, which is always built-in, rather than living in the processor driver which may not be built. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: export acpi_get_cpuid()Alex Chiang
Rename static get_cpu_id() to acpi_get_cpuid() and export it. This change also gives us an opportunity to remove the #ifndef CONFIG_SMP from processor_driver.c and into a header file where it properly belongs. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: mv processor_pdc.c processor_core.cAlex Chiang
We've renamed the old processor_core.c to processor_driver.c, to convey the idea that it can be built modular and has driver-like bits. Now let's re-create a processor_core.c for the bits needed statically by the rest of the kernel. The contents of processor_pdc.c are a good starting spot, so let's just rename that file and complete our three card monte. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14ACPI: processor: mv processor_core.c processor_driver.cAlex Chiang
The ACPI processor driver can be built as a module. But it has pieces of code that should always be built statically into the kernel. The plan is for processor_core.c to contain the static bits while processor_driver.c contains the module-like bits. Since the bulk of the code in the current processor_core.c is module-like, first step is to rename the file to processor_driver.c Next step will re-create processor_core.c and cherry-pick out the static bits. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15Merge branch 'radeon-for-airlied' of ../linux-2.6 into drm-linusDave Airlie
* 'radeon-for-airlied' of ../linux-2.6: drm/radeon/kms: prepare for more reclocking operations drm/radeon/kms: switch to condition waiting for reclocking drm/radeon/r600: add missing license and comments to r600_blit_shaders.c drm/radeon/kms: improve coding style a little drm/radeon/kms: remove dead audio/HDMI code drm/radeon/kms: enable audio engine on DCE32 drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUs drm/radeon/kms: clean assigning HDMI blocks to encoders drm/radeon/kms: clean HDMI definitions drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timing drm/radeon/kms/r1xx: enable hw i2c drm/radeon/kms: fix i2c prescale calc on older radeons drm/radeon/kms: fix for hw i2c drm/radeon/kms: fix pal tv-out support on legacy IGP chips drm/radeon/kms: further spread spectrum fixes drm/radeon/kms: use lcd pll limits when available drm/radeon/kms/atom: spread spectrum fix drm/radeon/kms: catch atombios infinite loop and break out of it drm/radeon: add new RS880 pci id
2010-03-15Merge remote branch 'nouveau/for-airlied' into drm-linusDave Airlie
* nouveau/for-airlied: drm/nouveau: add module option to disable TV detection drm/nouveau: Never evict VRAM buffers to system. drm/nv50: fix connector table parsing for some cards drm/nv50: add a memory barrier to pushbuf submission drm/nouveau: print a message very early during suspend drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay. drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI drm/nouveau: add option to allow override of dcb connector table types drm/nv50: Improve PGRAPH interrupt handling. drm/nv50: Make ctxprog wait until interrupt handler is done. drm/nouveau: Fix fbcon corruption with font width not divisible by 8 drm/nv50: Remove redundant/incorrect ctxvals initialisation.
2010-03-14ACPI: plan to delete "acpi=ht" boot optionLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15drm/edid: allow certain bogus edids to hit a fixup path rather than failBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-14ACPI: remove "acpi=ht" DMI blacklistLen Brown
SuSE added these entries when deploying ACPI in Linux-2.4. I pulled them into Linux-2.6 on 2003-08-09. Over the last 6+ years, several entries have proven to be unnecessary and deleted, while no new entries have been added. Matthew suggests that they now have negative value, and I agree. Based-on-patch-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15drm: remove the EDID blob stored in the EDID property when it is disconnectedZhao Yakui
Now the EDID property will be updated when the corresponding EDID can be obtained from the external display device. But after the external device is plugged-out, the EDID property is not updated. In such case we still get the corresponding EDID property although it is already detected as disconnected. https://bugs.freedesktop.org/show_bug.cgi?id=26743 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/vmwgfx: depends on FBRandy Dunlap
vmwfgx uses framebuffer interfaces, so it should depend on FB. Otherwise it has these build errors (e.g., when CONFIG_FB=m): drivers/built-in.o: In function `vmw_fb_close': (.text+0x97713): undefined reference to `unregister_framebuffer' drivers/built-in.o: In function `vmw_fb_close': (.text+0x97754): undefined reference to `framebuffer_release' drivers/built-in.o: In function `vmw_fb_init': (.text+0x97e1c): undefined reference to `framebuffer_alloc' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9838d): undefined reference to `register_framebuffer' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9842a): undefined reference to `framebuffer_release' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm: "kobject_init/kobject_add" -> "kobject_init_and_add".Robert P. J. Day
Replace sequential calls to kobject_init() and kobject_add() with the combo wrapper kobject_init_and_add(), which provides the same semantics. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/ttm: use drm calloc large and free largeDave Airlie
Now that the drm core can do this, lets just use it, split the code out so TTM doesn't have to drag all of drmP.h in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: prepare for more reclocking operationsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: switch to condition waiting for reclockingRafał Miłecki
We tried to implement interruptible waiting with timeout (it was broken anyway) which was not a good idea as explained by Andrew. It's possible to avoid using additional variable but actually it inroduces using more complex in-kernel tools. So simply add one variable for condition. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-14PNPACPI: add bus number supportBjorn Helgaas
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Previously, PNP ignored bus number resources. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14PNPACPI: add window supportBjorn Helgaas
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. This does not add support for *setting* windows via the /proc interface. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14resource: add window supportBjorn Helgaas
Add support for resource windows. This is for bridge resources, i.e., regions where a bridge forwards transactions from the primary to the secondary side. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14resource: add bus number supportBjorn Helgaas
Add support for bus number resources. This is for bridges with a range of bus numbers behind them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14resource: expand IORESOURCE_TYPE_BITS to make room for bus resource typeBjorn Helgaas
No functional change; this just makes room for another resource type. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-15drm/radeon/r600: add missing license and comments to r600_blit_shaders.cAlex Deucher
R6xx+ cards need to use the 3D engine to blit data which requires quite a bit of hw state setup. Rather than pull the whole 3D driver (which normally generates the 3D state) into the DRM, we opt to use statically generated state tables. The regsiter state and shaders were hand generated to support blitting functionality. See the 3D driver or documentation for descriptions of the registers and shader instructions. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: improve coding style a littleRafał Miłecki
We still have many magic numbers in HDMI/audio to define Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: remove dead audio/HDMI codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: enable audio engine on DCE32Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUsRafał Miłecki
Older GPUs are little different, HDMI blocks are not hard-wired, but routable. We should just find some free HDMI block and route it to choosen encoder. In case of RS6x0 there is only one HDMI block, we don't enable HDMI on RS6x00 yet however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: clean assigning HDMI blocks to encodersRafał Miłecki
We almost always used first HDMI block for first encoder and second for sencod. Exception was KLDSCP_LVTMA. Analyzing code picking DIG encoder shows the same behaviour. It shows HDMI block are related to DIGs, which relation we now use. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: clean HDMI definitionsRafał Miłecki
We already know same offsets are used for different encoders/transmitters, so just numeric them instead naming incorrectly. Additionaly we found additional registers needed for RV770+ Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timingAlex Deucher
based on ddx patch from Matthias Hopf. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms/r1xx: enable hw i2cAlex Deucher
fixing the i2c prescale in the last patch gets it working on r1xx. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 01:30:31 +0000