| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Most attention this cycle went to optimizing blk-mq request-based DM
(dm-mq) that is used exclussively by DM multipath:
- A stable fix for dm-mq that eliminates excessive context
switching offers the biggest performance improvement (for both
IOPs and throughput).
- But more work is needed, during the next cycle, to reduce
spinlock contention in DM multipath on large NUMA systems.
- A stable fix for a NULL pointer seen when DM stats is enabled on a DM
multipath device that must requeue an IO due to path failure.
- A stable fix for DM snapshot to disallow the COW and origin devices
from being identical. This amounts to graceful failure in the face
of userspace error because these devices shouldn't ever be identical.
- Stable fixes for DM cache and DM thin provisioning to address crashes
seen if/when their respective metadata device experiences failures
that cause the transition to 'fail_io' mode.
- The DM cache 'mq' policy is now an alias for the 'smq' policy. The
'smq' policy proved to be consistently better than 'mq'. As such
'mq', with all its complex user-facing tunables, has been eliminated.
- Improve DM thin provisioning to consistently return -ENOSPC once the
thin-pool's data volume is out of space.
- Improve DM core to properly handle error propagation if
bio_integrity_clone() fails in clone_bio().
- Other small cleanups and improvements to DM core.
* tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits)
dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
dm thin: consistently return -ENOSPC if pool has run out of data space
dm cache: bump the target version
dm cache: make sure every metadata function checks fail_io
dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO
dm cache policy smq: clarify that mq registration failure was for 'mq'
dm: return error if bio_integrity_clone() fails in clone_bio()
dm thin metadata: don't issue prefetches if a transaction abort has failed
dm snapshot: disallow the COW and origin devices from being identical
dm cache: make the 'mq' policy an alias for 'smq'
dm: drop unnecessary assignment of md->queue
dm: reorder 'struct mapped_device' members to fix alignment and holes
dm: remove dummy definition of 'struct dm_table'
dm: add 'dm_numa_node' module parameter
dm thin metadata: remove needless newline from subtree_dec() DMERR message
dm mpath: cleanup reinstate_path() et al based on code review
dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy
dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate
dm round robin: use percpu 'repeat_count' and 'current_path'
dm path selector: remove 'repeat_count' return from .select_path hook
...
|
|
Pull SCSI updates from James Bottomley:
"This pull includes driver updates from the usual suspects (stex, hpsa,
ncr5380, scsi_dh, qla2xxx, be2iscsi, hisi_sas, cxlflash, aacraid,
mp3sas, megaraid_sas, ibmvscsi, ufs) plus an assortment of
miscellaneous fixes.
The major user visible change of this pull is that we've moved from
monotonically increasing host number to an ida allocated one (meaning
the numbers get re-used) because someone managed to wrap the count in
an iscsi system. We don't believe there will be any adverse
consequences of this"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (230 commits)
MAINTAINERS: use new email address for James Bottomley
mpt3sas: Remove unnecessary synchronize_irq() before free_irq()
sg: fix dxferp in from_to case
cxlflash: Increase cmd_per_lun for better throughput
cxlflash: Fix to avoid unnecessary scan with internal LUNs
cxlflash: Reorder user context initialization
cxlflash: Simplify attach path error cleanup
cxlflash: Split out context initialization
cxlflash: Unmap problem state area before detaching master context
cxlflash: Simplify PCI registration
scsi: storvsc: fix SRB_STATUS_ABORTED handling
be2iscsi: set the boot_kset pointer to NULL in case of failure
sd: Fix discard granularity when LBPRZ=1
be2iscsi: Remove unnecessary synchronize_irq() before free_irq()
scsi_sysfs: call 'device_add' after attaching device handler
scsi_dh_emc: update 'access_state' field
scsi_dh_rdac: update 'access_state' field
scsi_dh_alua: update 'access_state' field
scsi_dh_alua: use common definitions for ALUA state
scsi: Add 'access_state' and 'preferred_path' attribute
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull iscsi_ibft update from Konrad Rzeszutek Wilk:
"A simple patch that had been rattling around in SuSE repo"
* 'stable/for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Add prefix-len attr and display netmask
|
|
David Daney says:
====================
net/phy: Fixes for Cavium Thunder MDIO code.
Previous patch set:
commit 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
commit 1eefee901fca ("phy: mdio-octeon: Refactor into two files/modules")
commit 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Had several problems. We try to fix them here.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible, although unlikely, that probing will find the
phy_device for the first LMAC of a thunder BGX device, but then need
to fail with -EPROBE_DEFER on a subsequent LMAC. In this case, we
need to call put_device() on each of the phy_devices that were
obtained, but will be unused due to returning -EPROBE_DEFER.
Also, since we can break out of the probing loop early, we need to
explicitly call of_node_put() outside of the loop.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously we selected MDIO_OCTEON, which after creating the Thunder
specific MDIO bus driver is much less useful.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the code was factored out of mdio-octeon.c, the
MODULE_DESCRIPTION, MODULE_AUTHOR and MODULE_LICENSE annotations were
inadvertently omitted. Restore them so that we don't get kernel taint
warnings upon module loading.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Locking ppp_mutex must be done before dereferencing file->private_data,
otherwise it could be modified before ppp_unattached_ioctl() takes the
lock. This could lead ppp_unattached_ioctl() to override ->private_data,
thus leaking reference to the ppp_file previously pointed to.
v2: lock all ppp_ioctl() instead of just checking private_data in
ppp_unattached_ioctl(), to avoid ambiguous behaviour.
Fixes: f3ff8a4d80e8 ("ppp: push BKL down into the driver")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Caesar Wang says:
====================
arc_emac: fixes the emac issues and cleanup emac drivers
This series patches are based on kernel 4.5-rc7+ version.
Linux version 4.5.0-rc7-next-20160311+ (wxt@nb) (...) #45 SMP Sun Mar 13 16:17:56
The history patch in here:
Patch-v1: https://lkml.org/lkml/2016/3/11/209
Patch-v2: https://lkml.org/lkml/2016/3/13/39
Verified on kylin board with my github.
https://github.com/Caesar-github/rockchip/tree/kylin/next
That's verified on kylin board with ubuntu os.
This series patches are built all pass with Mr.robot on
https://github.com/Caesar-github/linux/tree/build-emac-v3
How to test and verify?
You can refer to the following wiki document.
http://rockchip.wikidot.com/linux-develop-guide
bootup log:
[ 1.264740] rockchip_emac 10200000.ethernet: no regulator found
[ 1.270908] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
[ 1.278362] rockchip_emac 10200000.ethernet: IRQ is 29
[ 1.283747] rockchip_emac 10200000.ethernet: MAC address is now 06:5d:61:c7:39:41
[ 1.291314] rockchip_emac 10200000.ethernet: GPIO lookup for consumer phy-reset
[ 1.291333] rockchip_emac 10200000.ethernet: using device tree for GPIO lookup
[ 1.663155] rockchip_emac 10200000.ethernet: connected to Generic PHY phy with id 0xffffc816
[ 8.863448] rockchip_emac 10200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
root@localhost:/# busybox ping www.baidu.com
PING www.baidu.com (14.215.177.38): 56 data bytes
64 bytes from 14.215.177.38: seq=0 ttl=48 time=35.046 ms
64 bytes from 14.215.177.38: seq=1 ttl=48 time=35.095 ms
64 bytes from 14.215.177.38: seq=2 ttl=48 time=34.203 ms
64 bytes from 14.215.177.38: seq=3 ttl=48 time=38.516 ms
...
---
1) This series has 6 patches: (1--->9)
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree
net: arc_emac: support the phy reset for emac driver
net: arc: trivial: cleanup the emac driver
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036
ARM: dts: rockchip: add support emac for RK3036
2) This series patches have the following descriptions:
Hi Rob, David:
PATCH[1/9-2/9]: ====>
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree
The patches change the rockchip emac document for more compatible and
Add the phy reset property for document.
---
Hi David
PATCH[3/9]: ====>
net: arc_emac: support the phy reset for emac driver
The emac didn't work on kylin board since in some case the clocks parent changed.
The kylin hardware connects the phy reset pin, we should use it with real world.
As the previous patch discuss on https://patchwork.kernel.org/patch/8186801/
And as sergei/Heiko suggestions on
https://patchwork.kernel.org/patch/8564571/
---
Hi David
PATCH[4/9]: ====>
net: arc: trivial: cleanup the emac driver
The first time to look the emac drivers, I think that have to cleanup the drivers with scripts.
Although it's the trivial things, in order to be more read.
---
Hi Heiko,Michael,Stephen:
PATCH[5/9-8/9]: ====> clk: rockchip: rk3036: fix and add node id for emac clock
Four-part from https://patchwork.kernel.org/patch/8564581/
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036
Add the emac needed clocks for rk3036 SoCs
---
Hi Heiko:
PATCH[9/9]: ====>
ARM: dts: rockchip: add support emac for RK3036
Add the emac needed main info for rk3036 dts.
---
Thanks your reviewing! :)
Changes in v3:
- %s/he/the
- Add the Cc people
- As Sergei comments, the original name is better, so
%s/reset-gpios/phy-reset-gpios
- Add the Cc people.
- Caused the build error since the missing include head file.
- %s/reset/phy-reset to match the device tree.
- Add the Cc people
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- rename reset-gpio to phy-reset-gpios.
- change the commit.
- remove the pcfg_output_high, that's really not needed for emac.
- Add the Cc people.
- Fixes the 'zhengxing' to 'Xing Zheng'.
Changes in v2:
- change the commit and remove the repeat the name 'rockchip'.
- %s/phy-reset-gpios/reset-gpios
- As the pervious version, Sergei and Heiko comments on
https://patchwork.kernel.org/patch/8564571/.
- Nevermind, add signed-off since Heiko the original patch,
refer the Heiko's test patch on
https://github.com/mmind/linux-rockchip/commit/a943c588783438ff1c508dfa8c79f1709aa5775e
:)
- As the robot notice the build error since overflow in implicit
constant conversion.
- rename phy-reset-gpio to reset-gpios.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the emac device node for rk3036 SoCs.
We need to let mac clock under the DPLL which is able to provide
the accurate 50MHz what mac_ref need, since that will cause some
unstable things if the cpufreq is working.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The emac needs constant and very specific rate but the possible PLL-sources
are very limited, so we expect the PLL source to be set manually on per
board and don't want it to get changed in an automatic way later.
So add the necessary clock-id and disable reparenting on set_rate calls.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Suitable PLLs for the emac on the rk3036 are difficult to find
and one of them is the (continuously changing) APLL. So in most
cases it will be necessary to select a PLL manually.
So add a clock-id for it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Associate the new clock id the clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the node-id for the emac hclk to the binding header.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch will make the driver more readability
The emac has the error and warnings if you run
'scripts/checkpatch.pl -f --subjective xxx' to check.
Let's clean up such trivial details.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds to support the emac phy reset.
Different boards may require different phy reset duration. Add property
phy-reset-duration for emac driver, so that the boards that need
a longer reset duration can specify it in their device tree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the following property for arc_emac.
1) phy-reset-gpios:
The phy-reset-gpio is an optional property for arc emac device tree boot.
Change the binding document to match the driver code.
2) phy-reset-duration:
Different boards may require different phy reset duration. Add property
phy-reset-duration for device tree probe, so that the boards that need
a longer reset duration can specify it in their device tree.
Anyway, we can add the above property for arc emac.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc; Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the rk3036 SoCs to match driver for document since the emac driver
has supported the rk3036 SoCs.
This patch adds the rk3036/rk3066/rk3188 SoCS to compatible for rockchip
emac ducument. Also, that will suit for other SoCs in the future.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the ETHTOOL_GLINKSETTINGS implementation finds that userland is
using the wrong number of words of link mode bitmaps (or is trying to
find out the right numbers) it sets the cmd field to 0 in the response
structure.
This is inconsistent with the implementation of every other ethtool
command, so let's remove that inconsistency before it gets into a
stable release.
Fixes: 3f1ac7a700d03 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Iff sh_eth_phy_start() call fails in sh_eth_open(), the netif_start_queue()
call done by sh_eth_dev_init() is not undone. In order to deal with that,
stop calling netif_start_queue() from there, so that it can be called only
when the device is fully opened and sh_eth_dev_init() only deals with the
hardware initialization, symmetrically to sh_eth_dev_exit()...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When driver has hit a parity event, HW can no longer write to host memory.
As a result, Tx completions cannot be written to the host SB memory, and
waiting for Tx completions eventually timeout.
As driver is willing to delay as much as 1-2 seconds per Tx queue for its
draining and this delay is sequential, the time to recover might greatly
lengthen needlessly in case the recovery is done under multi-connection
traffic.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
local_bh_disable() + spin_lock() is equivalent to spin_lock_bh(), same for
the unlock/enable case, so replace the calls by the appropriate wrappers.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Seth and Vojtech are no longer active maintainers of livepatch, so
remove them in favor of Jessica and Miroslav.
Also add Petr as a designated reviewer.
[jikos@kernel.org: Petr is the only one affected who hasn't provided his
Ack by the time this patch has been applied, as he is offline curently;
but I hereby assert that I've talked to him and he's OK with this change]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Seth Jennings <sjenning@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
Here are sti patches for drm-next.
It brings:
- The support of the atomic_check for the planes and minor fixes for
planes
- The support of the vendor specific infoframe for HDMI and the
support of 2 HDMI properties related to the connector
- The support of the DVO solving panel detection issue and timing issue.
- The support of debugfs for connectors, encoders, crtcs and planes.
* '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits)
drm/sti: use u32 to store DMA addresses
drm: sti: remove sti_gem_prime_export hack
drm/sti: add debugfs fps_show/fps_get mechanism for planes
drm/sti: add debugfs entries for TVOUT encoders
drm/sti: add debugfs entries for MIXER crtc
drm/sti: add debugfs entries for VID plane
drm/sti: add debugfs entries for HQVDP plane
drm/sti: add debugfs entries for GDP planes
drm/sti: add debugfs entries for CURSOR plane
drm/sti: add debugfs entries for HDA connector
drm/sti: add debugfs entries for DVO connector
drm/sti: add debugfs entries for HDMI connector
drm/sti: add hdmi_mode property for HDMI connector
drm/sti: add colorspace property to the HDMI connector
drm/sti: add HDMI vendor specific infoframe
drm/sti: reset infoframe transmission when HDMI is stopped
drm/sti: HDMI infoframe transmission mode not take into account
drm/sti: reset HD DACS when HDA connector is created
drm/sti: fix dvo data_enable signal
drm/sti: adjust delay for DVO
...
|
|
into drm-next
A few more fixes and cleanups for 4.6:
- DCE code cleanups
- HDP flush/invalidation fixes
- GPUVM fixes
- switch to drm_vblank_[on|off]
- PX fixes
- misc bug fixes
* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (50 commits)
drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well
drm/amdgpu: Revert "add mutex for ba_va->valids/invalids"
drm/amdgpu: Revert "add lock for interval tree in vm"
drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)"
drm/amdgpu: reserve the PD during unmap and remove
drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping
drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
MAINTAINERS: update radeon entry to include amdgpu as well
drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
drm/radeon: disable runtime pm on PX laptops without dGPU power control
drm/amd/amdgpu: Fix indentation in do_set_base() (DCEv8)
drm/amd/amdgpu: make afmt_init cleanup if alloc fails (DCEv8)
drm/amd/amdgpu: Move config init flag to bottom of sw_init (DCEv8)
drm/amd/amdgpu: Don't proceed into audio_fini if audio is disabled (DCEv8)
drm/amd/amdgpu: Fix identation in do_set_base() (DCEv10)
drm/amd/amdgpu: Make afmt_init cleanup if alloc fails (DCEv10)
drm/amd/amdgpu: Move initialized flag to bottom of sw_init (DCEv10)
drm/amd/amdgpu: Don't proceed in audio_fini if disabled (DCEv10)
drm/amd/amdgpu: Fix indentation in dce_v11_0_crtc_do_set_base()
drm/amd/amdgpu: Make afmt_init() cleanup if alloc fails (DCEv11)
...
|
|
git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2016-03-16
* tag 'vmwgfx-next-160316' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump driver minor
drm/vmwgfx: Allow the UPDATE_LAYOUT ioctl from control nodes
drm/vmwgfx: Send a hotplug event at master_set
drm/vmwgfx: Default to explicit crtc placement for screen targets and screen objects
drm/vmwgfx: Calculate the cursor position based on the crtc gui origin
drm/vmwgfx: Add connector properties to switch between explicit and implicit placement
drm/vmwgfx: Add suggested screen x and y connector properties
drm/vmwgfx: Add implicit framebuffer checks to the screen target code
drm/vmwgfx: Break out implicit fb code
drm/vmwgfx: Rework screen target page flips v2
drm/vmwgfx: Fix screen object page flips for large framebuffers
drm/vmwgfx: Fix a screen object framebuffer dirty corner case
drm/vmwgfx: Add DXGenMips support
|
|
http://anongit.freedesktop.org/git/drm-intel into drm-next
* tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel:
drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.
|
|
http://anongit.freedesktop.org/git/tegra/linux into drm-next
drm/panel: Changes for v4.6-rc1
This contains a refactoring of parts of the DSI core to allow creating
DSI devices from non-DSI control busses (i.e. I2C, SPI, ...).
Other than that there's support for a couple of new panels as well as
a few cleanup patches.
* tag 'drm/panel/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
drm/bridge: Make (pre/post) enable/disable callbacks optional
drm/panel: simple: Add URT UMSH-8596MD-xT panels support
dt-bindings: Add URT UMSH-8596MD-xT panel bindings
of: Add United Radiant Technology Corporation vendor prefix
drm/panel: simple: Support for LG lp120up1 panel
dt-bindings: Add LG lp120up1 panel bindings
drm/panel: simple: Fix g121x1_l03 hsync/vsync polarity
drm/dsi: Get DSI host by DT device node
drm/dsi: Add routine to unregister a DSI device
drm/dsi: Try to match non-DT DSI devices
drm/dsi: Use mipi_dsi_device_register_full() for DSI device creation
drm/dsi: Check for CONFIG_OF when defining of_mipi_dsi_device_add()
|
|
http://anongit.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v4.6-rc1
Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.
* tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
gpu: host1x: Use a signed return type for do_relocs()
gpu: host1x: bus: Add missing of_node_put()
|
|
I hate doing this but it hurts my eyes to go over code that does not
comply with indentation rules. Only thing that is not only space change
is in atom.c all other files are space indentation issues.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
issue for CZ
Set the UVD and VCE DPM flags otherwise UVD and VCE DPM won't get enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: stable@vger.kernel.org
|
|
We don't need to extend them to 64bits any more, so avoid the extra overhead.
v2: update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
It's just overhead to check the fence value
when we signal them directly anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Amdgpu doesn't support using scratch registers for fences any more.
So we won't see values like 0xdeadbeef as fence value any more.
v2: reschedule timer even if no change detected
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Because of the scheduler we need to signal all fences immediately
anyway, so try to avoid the waitqueue overhead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Just wait for last fence instead of waiting for the sequence manually.
v2: don't use amdgpu_sched_jobs for the mask
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Just keep all HW fences in a RCU protected array as a
first step to replace the wait queue.
v2: update commit message, move fixes into separate patch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Make this a parameter instead of using the global variable directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
Fences must be freed RCU protected, otherwise the reservation_object_*_rcu()
functions can run into problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fences must be freed RCU protected, otherwise the reservation_object_*_rcu()
functions can run into problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to keep the two separate any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
The comment about the loop counter was never valid, even when you have
multiple threads this loop only runs as long as the sequence increases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for v4.6:
Enumeration:
- Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas
Resource management:
- Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Don't assign or reassign immutable resources (Bjorn Helgaas)
- Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
- Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
- Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
- ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
- ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
- Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
- Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
- rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
- designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
Virtualization:
- Wait for up to 1000ms after FLR reset (Alex Williamson)
- Support SR-IOV on any function type (Kelly Zytaruk)
- Add ACS quirk for all Cavium devices (Manish Jaggi)
AER:
- Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
- Restore pci_ops pointer while calling original pci_ops (David Daney)
- Fix aer_inject error codes (Jean Delvare)
- Use dev_warn() in aer_inject (Jean Delvare)
- Log actual error causes in aer_inject (Jean Delvare)
- Log aer_inject error injections (Jean Delvare)
VPD:
- Prevent VPD access for buggy devices (Babu Moger)
- Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
- Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
- Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
- Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
- Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
- Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
- Update VPD definitions (Hannes Reinecke)
- Allow access to VPD attributes with size 0 (Hannes Reinecke)
- Determine actual VPD size on first access (Hannes Reinecke)
Generic host bridge driver:
- Move structure definitions to separate header file (David Daney)
- Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
- Expose pci_host_common_probe() for use by other drivers (David Daney)
Altera host bridge driver:
- Fix altera_pcie_link_is_up() (Ley Foon Tan)
Cavium ThunderX host bridge driver:
- Add PCIe host driver for ThunderX processors (David Daney)
- Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)
Freescale i.MX6 host bridge driver:
- Add DT bindings to configure PHY Tx driver settings (Justin Waters)
- Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
- Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
- Remove broken Gen2 workaround (Lucas Stach)
- Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)
Freescale Layerscape host bridge driver:
- Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)
Intel VMD host bridge driver:
- Attach VMD resources to parent domain's resource tree (Jon Derrick)
- Set bus resource start to 0 (Keith Busch)
Microsoft Hyper-V host bridge driver:
- Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
- Look up IRQ domain by fwnode_handle (Jake Oshins)
- Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)
NVIDIA Tegra host bridge driver:
- Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
- Implement ->{add,remove}_bus() callbacks (Thierry Reding)
- Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
- Track bus -> CPU mapping (Thierry Reding)
- Remove misleading PHYS_OFFSET (Thierry Reding)
Renesas R-Car host bridge driver:
- Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)
Synopsys DesignWare host bridge driver:
- ARC: Add PCI support (Joao Pinto)
- Add generic dw_pcie_wait_for_link() (Joao Pinto)
- Add default link up check if sub-driver doesn't override (Joao Pinto)
- Add driver for prototyping kits based on ARC SDP (Joao Pinto)
TI Keystone host bridge driver:
- Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)
Xilinx AXI host bridge driver:
- Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
- Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
- Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
- Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
- microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)
Xilinx NWL host bridge driver:
- Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)
Miscellaneous:
- Check device_attach() return value always (Bjorn Helgaas)
- Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
- Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
- Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
- Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
- unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
- Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
- Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
- Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
- frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
- Move pci_dma_* helpers to common code (Christoph Hellwig)
- Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
- Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
- Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"
* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
PCI: designware: Add driver for prototyping kits based on ARC SDP
PCI: designware: Add default link up check if sub-driver doesn't override
PCI: designware: Add generic dw_pcie_wait_for_link()
PCI: Cleanup pci/pcie/Kconfig whitespace
PCI: Simplify pci_create_attr() control flow
PCI: Don't leak memory if sysfs_create_bin_file() fails
PCI: Simplify sysfs ROM cleanup
PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
ia64/PCI: Use ioremap() instead of open-coded equivalent
ia64/PCI: Use temporary struct resource * to avoid repetition
PCI: Clean up pci_map_rom() whitespace
PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
PCI: thunder: Add PCIe host driver for ThunderX processors
PCI: generic: Expose pci_host_common_probe() for use by other drivers
PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"This time the majority of changes go into cpufreq and they are
significant.
First off, the way CPU frequency updates are triggered is different
now. Instead of having to set up and manage a deferrable timer for
each CPU in the system to evaluate and possibly change its frequency
periodically, cpufreq governors set up callbacks to be invoked by the
scheduler on a regular basis (basically on utilization updates). The
"old" governors, "ondemand" and "conservative", still do all of their
work in process context (although that is triggered by the scheduler
now), but intel_pstate does it all in the callback invoked by the
scheduler with no need for any additional asynchronous processing.
Of course, this eliminates the overhead related to the management of
all those timers, but also it allows the cpufreq governor code to be
simplified quite a bit. On top of that, the common code and data
structures used by the "ondemand" and "conservative" governors are
cleaned up and made more straightforward and some long-standing and
quite annoying problems are addressed. In particular, the handling of
governor sysfs attributes is modified and the related locking becomes
more fine grained which allows some concurrency problems to be avoided
(particularly deadlocks with the core cpufreq code).
In principle, the new mechanism for triggering frequency updates
allows utilization information to be passed from the scheduler to
cpufreq. Although the current code doesn't make use of it, in the
works is a new cpufreq governor that will make decisions based on the
scheduler's utilization data. That should allow the scheduler and
cpufreq to work more closely together in the long run.
In addition to the core and governor changes, cpufreq drivers are
updated too. Fixes and optimizations go into intel_pstate, the
cpufreq-dt driver is updated on top of some modification in the
Operating Performance Points (OPP) framework and there are fixes and
other updates in the powernv cpufreq driver.
Apart from the cpufreq updates there is some new ACPICA material,
including a fix for a problem introduced by previous ACPICA updates,
and some less significant changes in the ACPI code, like CPPC code
optimizations, ACPI processor driver cleanups and support for loading
ACPI tables from initrd.
Also updated are the generic power domains framework, the Intel RAPL
power capping driver and the turbostat utility and we have a bunch of
traditional assorted fixes and cleanups.
Specifics:
- Redesign of cpufreq governors and the intel_pstate driver to make
them use callbacks invoked by the scheduler to trigger CPU
frequency evaluation instead of using per-CPU deferrable timers for
that purpose (Rafael Wysocki).
- Reorganization and cleanup of cpufreq governor code to make it more
straightforward and fix some concurrency problems in it (Rafael
Wysocki, Viresh Kumar).
- Cleanup and improvements of locking in the cpufreq core (Viresh
Kumar).
- Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
Kumar, Eric Biggers).
- intel_pstate driver updates including fixes, optimizations and a
modification to make it enable enable hardware-coordinated P-state
selection (HWP) by default if supported by the processor (Philippe
Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
Franciosi).
- Operating Performance Points (OPP) framework updates to improve its
handling of voltage regulators and device clocks and updates of the
cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).
- Updates of the powernv cpufreq driver to fix initialization and
cleanup problems in it and correct its worker thread handling with
respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
Bhat).
- ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).
- ACPICA updates including one fix for a regression introduced by
previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
Colin Ian King).
- Support for installing ACPI tables from initrd (Lv Zheng).
- Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
Chaugule).
- Support for _HID(ACPI0010) devices (ACPI processor containers) and
ACPI processor driver cleanups (Sudeep Holla).
- Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
Aleksey Makarov).
- Modification of the ACPI PCI IRQ management code to make it treat
255 in the Interrupt Line register as "not connected" on x86 (as
per the specification) and avoid attempts to use that value as a
valid interrupt vector (Chen Fan).
- ACPI APEI fixes related to resource leaks (Josh Hunt).
- Removal of modularity from a few ACPI drivers (BGRT, GHES,
intel_pmic_crc) that cannot be built as modules in practice (Paul
Gortmaker).
- PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
as a valid resource type (Harb Abdulhamid).
- New device ID (future AMD I2C controller) in the ACPI driver for
AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).
- Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).
- cpuidle menu governor optimization to avoid a square root
computation in it (Rasmus Villemoes).
- Fix for potential use-after-free in the generic device properties
framework (Heikki Krogerus).
- Updates of the generic power domains (genpd) framework including
support for multiple power states of a domain, fixes and debugfs
output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
Geert Uytterhoeven).
- Intel RAPL power capping driver updates to reduce IPI overhead in
it (Jacob Pan).
- System suspend/hibernation code cleanups (Eric Biggers, Saurabh
Sengar).
- Year 2038 fix for the process freezer (Abhilash Jindal).
- turbostat utility updates including new features (decoding of more
registers and CPUID fields, sub-second intervals support, GFX MHz
and RC6 printout, --out command line option), fixes (syscall jitter
detection and workaround, reductioin of the number of syscalls
made, fixes related to Xeon x200 processors, compiler warning
fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"
* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
tools/power turbostat: bugfix: TDP MSRs print bits fixing
tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
tools/power turbostat: call __cpuid() instead of __get_cpuid()
tools/power turbostat: indicate SMX and SGX support
tools/power turbostat: detect and work around syscall jitter
tools/power turbostat: show GFX%rc6
tools/power turbostat: show GFXMHz
tools/power turbostat: show IRQs per CPU
tools/power turbostat: make fewer systems calls
tools/power turbostat: fix compiler warnings
tools/power turbostat: add --out option for saving output in a file
tools/power turbostat: re-name "%Busy" field to "Busy%"
tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
tools/power turbostat: allow sub-sec intervals
ACPI / APEI: ERST: Fixed leaked resources in erst_init
ACPI / APEI: Fix leaked resources
intel_pstate: Do not skip samples partially
intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
...
|
|
When all subsystems are disabled, gcc notices that cgroup_subsys_enabled_key
is a zero-length array and that any access to it must be out of bounds:
In file included from ../include/linux/cgroup.h:19:0,
from ../kernel/cgroup.c:31:
../kernel/cgroup.c: In function 'cgroup_add_cftypes':
../kernel/cgroup.c:261:53: error: array subscript is above array bounds [-Werror=array-bounds]
return static_key_enabled(cgroup_subsys_enabled_key[ssid]);
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
../include/linux/jump_label.h:271:40: note: in definition of macro 'static_key_enabled'
static_key_count((struct static_key *)x) > 0; \
^
We should never call the function in this particular case, so this is
not a bug. In order to silence the warning, this adds an explicit check
for the CGROUP_SUBSYS_COUNT==0 case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Before 2e91fa7f6d45 ("cgroup: keep zombies associated with their
original cgroups"), all dead tasks were associated with init_css_set.
If a zombie task is requested for migration, while migration prep
operations would still be performed on init_css_set, the actual
migration would ignore zombie tasks. As init_css_set is always valid,
this worked fine.
However, after 2e91fa7f6d45, zombie tasks stay with the css_set it was
associated with at the time of death. Let's say a task T associated
with cgroup A on hierarchy H-1 and cgroup B on hiearchy H-2. After T
becomes a zombie, it would still remain associated with A and B. If A
only contains zombie tasks, it can be removed. On removal, A gets
marked offline but stays pinned until all zombies are drained. At
this point, if migration is initiated on T to a cgroup C on hierarchy
H-2, migration path would try to prepare T's css_set for migration and
trigger the following.
WARNING: CPU: 0 PID: 1576 at kernel/cgroup.c:474 cgroup_get+0x121/0x160()
CPU: 0 PID: 1576 Comm: bash Not tainted 4.4.0-work+ #289
...
Call Trace:
[<ffffffff8127e63c>] dump_stack+0x4e/0x82
[<ffffffff810445e8>] warn_slowpath_common+0x78/0xb0
[<ffffffff810446d5>] warn_slowpath_null+0x15/0x20
[<ffffffff810c33e1>] cgroup_get+0x121/0x160
[<ffffffff810c349b>] link_css_set+0x7b/0x90
[<ffffffff810c4fbc>] find_css_set+0x3bc/0x5e0
[<ffffffff810c5269>] cgroup_migrate_prepare_dst+0x89/0x1f0
[<ffffffff810c7547>] cgroup_attach_task+0x157/0x230
[<ffffffff810c7a17>] __cgroup_procs_write+0x2b7/0x470
[<ffffffff810c7bdc>] cgroup_tasks_write+0xc/0x10
[<ffffffff810c4790>] cgroup_file_write+0x30/0x1b0
[<ffffffff811c68fc>] kernfs_fop_write+0x13c/0x180
[<ffffffff81151673>] __vfs_write+0x23/0xe0
[<ffffffff81152494>] vfs_write+0xa4/0x1a0
[<ffffffff811532d4>] SyS_write+0x44/0xa0
[<ffffffff814af2d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
It doesn't make sense to prepare migration for css_sets pointing to
dead cgroups as they are guaranteed to contain only zombies which are
ignored later during migration. This patch makes cgroup destruction
path mark all affected css_sets as dead and updates the migration path
to ignore them during preparation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 2e91fa7f6d45 ("cgroup: keep zombies associated with their original cgroups")
Cc: stable@vger.kernel.org # v4.4+
|
|
NFS: NFSoRDMA Client Side Changes
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
|
|
Smatch rightfully complains that wdd is dereferenced in the watchdog
release function after being checked for NULL. Also make sure that it
is not accessed outside mutex protection to avoid use-after-free problems.
Fixes: e6c71e84e4c0 ("watchdog: Introduce WDOG_HW_RUNNING flag")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
The watchdog infrastructure now supports handling watchdog keepalive
if the watchdog is running while the watchdog device is closed.
Convert the driver to use this infrastructure.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Convert driver to use watchdog infrastructure. This includes
infrastructure support to handle watchdog keepalive if the watchdog
is running while the watchdog device is closed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
