summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-01uartlite: allow building for timberdale MFDRichard Röjfors
Some configurations of the Timberdale FPGA has the uartlite included. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01docs: update patch size in SubmittingPatchesRandy Dunlap
This patch size comment is like so last millenium. Update it to modern times. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01sdio: pass whitelisted cis funce tuples to sdio driversAlbert Herranz
Some manufacturers provide vendor information in non-vendor specific CIS tuples. For example, Broadcom uses an Extended Function tuple to provide the MAC address on some of their network cards, as in the case of the Nintendo Wii WLAN daughter card. This patch allows passing whitelisted FUNCE tuples unknown to the SDIO core to a matching SDIO driver instead of rejecting them and failing. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01mm/rmap.c: fix commentHuang Shijie
The page_address_in_vma() is not only used in unuse_vma(). Signed-off-by: Huang Shijie <shijie8@gmail.com> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01x86: fix csum_ipv6_magic asm memory clobberSamuel Thibault
Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a memory clobber, as it is only passed the address of the buffer, not a memory reference to the buffer itself. This caused failures in Hurd's pfinetv4 when we tried to compile it with gcc-4.3 (bogus checksums). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01mn10300: fix kernel build failures when using gcc-4.xMark Salter
Fix some build failures when using gcc-4.x for MN10300. Firstly, __get_user() fails to build because the pointer points to a const and __gu_val ends up being read-only: In file included from include/linux/mempolicy.h:62, from init/main.c:50: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output make[1]: *** [init/main.o] Error 1 Secondly, gcc-4 doesn't allow casts of lvalues: UPD include/linux/compile.h arch/mn10300/kernel/rtc.c: In function 'calibrate_clock': arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1 These are seen with gcc 4.2.1. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01MAINTAINERS: ARM/Palm file patternsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Tomas Cech <sleep_walker@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01Char: vt_ioctl, fix BKL imbalanceJiri Slaby
Stanse found (again) a BKL imbalance in vt_ioctl. It's easily triggerable by ioctl(dev_tty_fd, VT_SETACTIVATE, NULL); Introduced by commit d3b5cffcf84a8bdc7073dce4745d67c72629af85 Author: Alan Cox <alan@linux.intel.com> Date: Sat Sep 19 13:13:26 2009 -0700 vt: add an activate and lock Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01revert "m68k: convert to asm-generic/hardirq.h"Andrew Morton
Revert 45d80eea87c9f8292d2d33173d6866c0ec57238a ("m68k: convert to asm-generic/hardirq.h") - it fails to compile due to an inclusion tangle: In file included from include/linux/irq.h:12, from include/asm-generic/hardirq.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq_mm.h:6, from /usr/src/devel/arch/m68k/include/asm/hardirq.h:4, from include/linux/hardirq.h:10, from /usr/src/devel/arch/m68k/include/asm/system_mm.h:69, from /usr/src/devel/arch/m68k/include/asm/system.h:4, from include/linux/list.h:7, from include/linux/preempt.h:11, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from arch/m68k/kernel/asm-offsets.c:14: include/linux/smp.h:17: error: field 'list' has incomplete type Cc: Christoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01asm-generic/gpio.h: pull in linux/kernel.h for might_sleep()Mike Frysinger
The asm-generic/gpio.h header uses the might_sleep() macro but doesn't include the header for it, so any source code that might include linux/gpio.h before linux/kernel.h can easily lead to a build failure. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01drivers/input/input.c: fix CONFIG_PM=n warningAndrew Morton
drivers/input/input.c:1277: warning: 'input_dev_reset' defined but not used Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01module: fix up CONFIG_KALLSYMS=n build.Paul Mundt
Starting from commit 4a4962263f07d14660849ec134ee42b63e95ea9a "reduce symbol table for loaded modules (v2)", the kernel/module.c build is broken with CONFIG_KALLSYMS disabled. CC kernel/module.o kernel/module.c:1995: warning: type defaults to 'int' in declaration of 'Elf_Hdr' kernel/module.c:1995: error: expected ';', ',' or ')' before '*' token kernel/module.c: In function 'load_module': kernel/module.c:2203: error: 'strmap' undeclared (first use in this function) kernel/module.c:2203: error: (Each undeclared identifier is reported only once kernel/module.c:2203: error: for each function it appears in.) kernel/module.c:2239: error: 'symoffs' undeclared (first use in this function) kernel/module.c:2239: error: implicit declaration of function 'layout_symtab' kernel/module.c:2240: error: 'stroffs' undeclared (first use in this function) make[1]: *** [kernel/module.o] Error 1 make: *** [kernel/module.o] Error 2 There are three different issues: - layout_symtab() takes a const Elf_Ehdr - layout_symtab() needs to return a value - symoffs/stroffs/strmap are referenced by the load_module() code despite being ifdefed out, which seems unnecessary given the noop behaviour of layout_symtab()/add_kallsyms() in the case of CONFIG_KALLSYMS=n. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Jan Beulich <jbeulich@novell.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01net: Use sk_mark for routing lookup in more placesAtis Elsts
This patch against v2.6.31 adds support for route lookup using sk_mark in some more places. The benefits from this patch are the following. First, SO_MARK option now has effect on UDP sockets too. Second, ip_queue_xmit() and inet_sk_rebuild_header() could fail to do routing lookup correctly if TCP sockets with SO_MARK were used. Signed-off-by: Atis Elsts <atis@mikrotik.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2009-10-01sky2: irqname based on pci addressStephen Hemminger
This is based on Michal Schmidt fix for skge. Most network drivers request their IRQ when the interface is activated. sky2 does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe sky2 The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered The fix is for sky2 to name the irq based on the pci device, as is done by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01skge: use unique IRQ nameMichal Schmidt
Most network drivers request their IRQ when the interface is activated. skge does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe skge The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered ... And "ls /proc/irq/17" shows two subdirectories, both called eth0. Fix it by using a unique name for skge's IRQ, based on the PCI address. The naming from the example then looks like this: $ grep skge /proc/interrupts 17: 169 IO-APIC-fasteoi skge@pci:0000:00:0a.0, eth0 irqbalance daemon will have to be taught to recognize "skge@" as an Ethernet interrupt. This will be a one-liner addition in classify.c. I will send a patch to irqbalance if this change is accepted. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01IPv4 TCP fails to send window scale option when window scale is zeroOri Finkelman
Acknowledge TCP window scale support by inserting the proper option in SYN/ACK and SYN headers even if our window scale is zero. This fixes the following observed behavior: 1. Client sends a SYN with TCP window scaling option and non zero window scale value to a Linux box. 2. Linux box notes large receive window from client. 3. Linux decides on a zero value of window scale for its part. 4. Due to compare against requested window scale size option, Linux does not to send windows scale TCP option header on SYN/ACK at all. With the following result: Client box thinks TCP window scaling is not supported, since SYN/ACK had no TCP window scale option, while Linux thinks that TCP window scaling is supported (and scale might be non zero), since SYN had TCP window scale option and we have a mismatched idea between the client and server regarding window sizes. Probably it also fixes up the following bug (not observed in practice): 1. Linux box opens TCP connection to some server. 2. Linux decides on zero value of window scale. 3. Due to compare against computed window scale size option, Linux does not to set windows scale TCP option header on SYN. With the expected result that the server OS does not use window scale option due to not receiving such an option in the SYN headers, leading to suboptimal performance. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: Ori Finkelman <ori@comsleep.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01net/ipv4/tcp.c: fix min() type mismatch warningAndrew Morton
net/ipv4/tcp.c: In function 'do_tcp_setsockopt': net/ipv4/tcp.c:2050: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01Kconfig: STRIP: Remove stale bits of STRIP help textRalf Baechle
Remove references to dead web site mosquitonet.Stanford.EDU. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01NET: mkiss: Fix typoRalf Baechle
This typo was introduced by 5793f4be23f0171b4999ca68a39a9157b44139f3 on October 14, 2005 ... Reported-by: Matti Aarnio <matti.aarnio@zmailer.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01tg3: Remove prev_vlan_tag from struct tx_ring_infoEric Dumazet
prev_vlan_tag field is not used. Patch saves 512*8 bytes per tx queue ring on 64bit arches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Matthew Carlson <mcarlson@broadcom.com>
2009-10-01move virtnet_remove to .devexit.textUwe Kleine-König
The function virtnet_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alex Williamson <alex.williamson@hp.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01don't use __devexit_p to wrap sgiseeq_removeUwe Kleine-König
The function sgiseeq_remove is defined using __exit, so don't use __devexit_p but __exit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David S. Miller <davem@davemloft.net> Cc: Wang Chen <wangchen@cn.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01don't use __devexit_p to wrap meth_removeUwe Kleine-König
The function meth_remove is defined using __exit, so don't use __devexit_p but __exit_p to wrap it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David S. Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01bonding: set primary param via sysfsJiri Pirko
Primary module parameter passed to bonding is pernament. That means if you release the primary slave and enslave it again, it becomes the primary slave again. But if you set primary slave via sysfs, the primary slave is only set once and it's not remembered in bond->params structure. Therefore the setting is lost after releasing the primary slave. This simple one-liner fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01Merge branch 'master' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable into for-linus
2009-10-01Btrfs: fix data space leak fixJosef Bacik
There is a problem where page_mkwrite can be called on a dirtied page that already has a delalloc range associated with it. The fix is to clear any delalloc bits for the range we are dirtying so the space accounting gets handled properly. This is the same thing we do in the normal write case, so we are consistent across the board. With this patch we no longer leak reserved space. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-01Btrfs: remove duplicates of filemap_ helpersChristoph Hellwig
Use filemap_fdatawrite_range and filemap_fdatawait_range instead of local copies of the functions. For filemap_fdatawait_range that also means replacing the awkward old wait_on_page_writeback_range calling convention with the regular filemap byte offsets. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-01Merge branch 'master' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable into for-linus
2009-10-01pktgen: Fix delay handlingEric Dumazet
After last pktgen changes, delay handling is wrong. pktgen actually sends packets at full line speed. Fix is to update pkt_dev->next_tx even if spin() returns early, so that next spin() calls have a chance to see a positive delay. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01Btrfs: take i_mutex before generic_write_checksChris Mason
btrfs_file_write was incorrectly calling generic_write_checks without taking i_mutex. This lead to problems with racing around i_size when doing O_APPEND writes. The fix here is to move i_mutex higher. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-01ARM: 5738/1: Correct TCM documentationLinus Walleij
It turns out that the TCM memory can be remap:ed by the MMU just like any other memory. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUsDmitry Artamonow
Commit 181f817eaaca4c1f introduced some new code to entry-common.S Sadly, this new code uses 'bx' instruction which is available only on ARMv5 and higher CPUs. This causes following compilation errors when building kernel for StrongARM (ARMv4): arch/arm/kernel/entry-common.S: Assembler messages: arch/arm/kernel/entry-common.S:129: Error: selected processor does not support `bx ip' arch/arm/kernel/entry-common.S:138: Error: selected processor does not support `bx ip' Fix these errors by using 'mov pc' instead of 'bx'. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01ARM: 5733/1: fix bcmring compile errorLeo Chen
The movement of the MMCI header file made bcmring break. It turns out it was including asm/mmc.h without using it so fixing the problem boils down to removing the offending include. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01ARM: 5732/1: remove redundant include fileLeo Chen
Remove duplicated #include('s) in arch/arm/mach-bcmring/core.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Leo Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3Linus Walleij
The #ifdefs in the MMCI driver were erroneous and just masking a bug in the U300 generic GPIO implementation. This removes the ifdefs and fixes the U300 generic GPIO instead. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-01Btrfs: fix arguments to btrfs_wait_on_page_writeback_rangeChristoph Hellwig
wait_on_page_writeback_range/btrfs_wait_on_page_writeback_range takes a pagecache offset, not a byte offset into the file. Shift the arguments around to wait for the correct range Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-01ixgbe: correct the parameter descriptionJiri Pirko
ccffad25b5136958d4769ed6de5e87992dd9c65c changed parameters for function ixgbe_update_uc_addr_list_generic but parameter description was not updated. This patch corrects it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30be2net: Workaround to fix a bug in Rx Completion processing.Ajit Khaparde
vtp bit in RX completion descriptor could be wrongly set in some skews of BladEngine. Ignore this bit if vtm is not set. Resending because the previous patch was against net-next tree. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-303c59x: Rework suspend and resumeAnton Vorontsov
As noticed by Alan Stern, there is still one issue with the driver: we disable PCI IRQ on suspend, but other devices on the same IRQ line might still need the IRQ enabled to suspend properly. Nowadays, PCI core handles all power management work by itself, with one condition though: if we use dev_pm_ops. So, rework the driver to only quiesce 3c59x internal logic on suspend, while PCI core will manage PCI device power state with IRQs disabled. Suggested-by: Rafael J. Wysocki <rjw@sisk.pl> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30drivers/net: ks8851_mll ethernet network driverChoi, David
This is the first registration of ks8851 network driver with MLL(address/data multiplexed) interface. Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30skge: Make sure both ports initialize correctlyMike McCormack
If allocation of the second ports fails, make sure that hw->ports is not 2 otherwise we'll crash trying to access the second port. This fix is copied from a similar fix in the sky2 driver (ca519274...), but is untested, as I don't have a skge card. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30bcm63xx_enet: timeout off by one in do_mdio_op()roel kluin
`while (limit-- >= 0)' reaches -2 after the loop upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix error exit for probe call.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Protect reset recovery with rtnl_lock().Ron Mercer
Move the call to rtnl_lock() to before the internal call to ql_adapter_down()/ql_adapter_up(). This prevents collisions that can happen when recovering from an asic error. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix spin_lock warning.Ron Mercer
Remove the unnecessary locking around the call to ql_adapter_reset(). Sep 25 08:17:29 localhost kernel: SOFTIRQ-ON-W at: Sep 25 08:17:29 localhost kernel: [<c0000000000a2964>] .lock_acquire+0x10c/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000004542e0>] ._spin_lock+0x34/0x58 Sep 25 08:17:29 localhost kernel: [<d000000006723070>] .ql_adapter_down+0x40c/0x4a0 [qlge] Sep 25 08:17:29 localhost kernel: [<d0000000067256d8>] .qlge_close+0x38/0x58 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000003ada6c>] .dev_close+0xdc/0x118 Sep 25 08:17:29 localhost kernel: [<c0000000003adb48>] .rollback_registered+0xa0/0x158 Sep 25 08:17:29 localhost kernel: [<c0000000003adc50>] .unregister_netdevice+0x50/0x7c Sep 25 08:17:29 localhost kernel: [<c0000000003adca0>] .unregister_netdev+0x24/0x40 Sep 25 08:17:29 localhost kernel: [<d00000000672e0c0>] .qlge_remove+0x28/0x64 [qlge] Sep 25 08:17:29 localhost kernel: [<c000000000253fdc>] .pci_device_remove+0x50/0x90 Sep 25 08:17:29 localhost kernel: [<c0000000002f5434>] .__device_release_driver+0x94/0xf8 Sep 25 08:17:29 localhost kernel: [<c0000000002f5560>] .driver_detach+0xc8/0xfc Sep 25 08:17:29 localhost kernel: [<c0000000002f3fd8>] .bus_remove_driver+0xb4/0x114 Sep 25 08:17:29 localhost kernel: [<c0000000002f5d4c>] .driver_unregister+0x80/0xa4 Sep 25 08:17:29 localhost kernel: [<c00000000025421c>] .pci_unregister_driver+0x50/0xc8 Sep 25 08:17:29 localhost kernel: [<d00000000672e044>] .qlge_exit+0x1c/0x34 [qlge] Sep 25 08:17:29 localhost kernel: [<c0000000000ac8b0>] .SyS_delete_module+0x234/0x2d0 Sep 25 08:17:29 localhost kernel: [<c000000000008554>] syscall_exit+0x0/0x40 Sep 25 08:17:29 localhost kernel: INITIAL USE at: Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix out of sync hardware semaphore.Ron Mercer
ql_clear_routing_entries() takes/gives it's own hardware semaphore since it is called from more than one place. ql_route_initialize() should make this call and THEN take it's own semaphore before doing it's work. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30qlge: Fix bad bit definitions.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30ixgbe: Remove ATR computation for UDP trafficPeter P Waskiewicz Jr
ATR support for UDP on 82599 needs to be redesigned, since the current model doesn't make much sense. The fallout from having it in though is it causes all UDP traffic to still compute the ATR hashes on transmit, which are useless. This removal will return upwards of 10% of relative computational overhead in forwarding tests. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 18:12:36 +0000