| Age | Commit message (Collapse) | Author |
|---|
|
devm_input_allocate_device() already sets parent of the new input
device, there's no need to set it up explicitly.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Previously, the sequence number in the regulator event subsystem was
updated without atomic operations, potentially leading to race
conditions. This commit addresses the issue by making the sequence
number atomic.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240104141314.3337037-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is nothing OF-specific in the driver, so switch from OF properties
helpers to generic device helpers.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The gotol implementation uses a wrong data type for the offset: it
should be s32, not s16.
Fixes: c690191e23d8 ("s390/bpf: Implement unconditional jump with 32-bit offset")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In commit f320bc742bc23 ("KVM: arm64: Prepare the creation of s1
mappings at EL2"), pKVM switches from a temporary host-provided
page-table to its own page-table at EL2. Since there is only a single
TTBR for the nVHE hypervisor, this involves disabling and re-enabling
the MMU in __pkvm_init_switch_pgd().
Unfortunately, the memory barriers here are not quite correct.
Specifically:
- A DSB is required to complete the TLB invalidation executed while
the MMU is disabled.
- An ISB is required to make the new TTBR value visible to the
page-table walker before the MMU is enabled in the SCTLR.
An earlier version of the patch actually got this correct:
https://lore.kernel.org/lkml/20210304184717.GB21795@willie-the-truck/
but thanks to some badly worded review comments from yours truly, these
were dropped for the version that was eventually merged.
Bring back the barriers and fix the potential issue (but note that this
was found by code inspection).
Cc: Quentin Perret <qperret@google.com>
Fixes: f320bc742bc23 ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104164220.7968-1-will@kernel.org
|
|
* kvm-arm64/vgic-6.8:
: .
: Fix for the GICv4.1 vSGI pending state being set/cleared from
: userspace, and some cleanup to the MMIO and userspace accessors
: for the pending state.
:
: Also a fix for a potential UAF in the ITS translation cache.
: .
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
KVM: arm64: vgic-v3: Reinterpret user ISPENDR writes as I{C,S}PENDR
KVM: arm64: vgic: Use common accessor for writes to ICPENDR
KVM: arm64: vgic: Use common accessor for writes to ISPENDR
KVM: arm64: vgic-v4: Restore pending state on host userspace write
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.
Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev
|
|
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.
Move the break condition to _after_ we have run task_work.
Cc: stable@vger.kernel.org
Fixes: 846072f16eed ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
"Unfortunately the P2SB deadlock fix broke some older HW and we need
some time to figure out the best way to fix the issue so reverting the
deadlock fix for now"
* tag 'platform-drivers-x86-v6.7-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
Revert "platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became more than wished, partly because of vacations. But all
changes are fairly device-specific and should be safe to apply:
- A regression fix for Oops at ASoC HD-audio probe
- A series of TAS2781 HD-audio codec fixes
- A random build regression fix with SPI helpers
- Minor endianness fix for USB-audio mixer code
- ASoC FSL driver error handling fix
- ASoC Mediatek driver register fix
- A series of ASoC meson g12a driver fixes
- A few usual HD-audio oneliner quirks"
* tag 'sound-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6
ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux
ASoC: meson: g12a-toacodec: Fix event generation
ASoC: meson: g12a-tohdmitx: Validate written enum values
ASoC: meson: g12a-toacodec: Validate written enum values
ASoC: SOF: Intel: hda-codec: Delay the codec device registration
ALSA: hda: cs35l41: fix building without CONFIG_SPI
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ZBook
ALSA: hda/realtek: enable SND_PCI_QUIRK for hp pavilion 14-ec1xxx series
ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offset
ALSA: scarlett2: Convert meter levels from little-endian
ALSA: hda/tas2781: remove sound controls in unbind
ALSA: hda/tas2781: move set_drv_data outside tasdevice_init
ALSA: hda/tas2781: fix typos in comment
ALSA: hda/tas2781: do not use regcache
ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable
|
|
Pull drm fixes from Dave Airlie:
"These were from over the holiday period, mainly i915, a couple of
qaic, bridge and an mgag200.
qaic:
- fix GEM import
- add quirk for soc version
bridge:
- parade-ps8640, ti-sn65dsi86: fix aux reads bounds
mgag200:
- fix gamma LUT init
i915:
- Fix bogus DPCD rev usage for DP phy test pattern setup
- Fix handling of MMIO triggered reports in the OA buffer"
* tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm:
drm/i915/perf: Update handling of MMIO triggered reports
drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE
drm/bridge: ps8640: Fix size mismatch warning w/ len
drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
drm/bridge: parade-ps8640: Never store more than msg->size bytes in AUX xfer
accel/qaic: Implement quirk for SOC_HW_VERSION
accel/qaic: Fix GEM import path code
|
|
bpfilter was supposed to convert iptables filtering rules into
BPF programs on the fly, from the kernel, through a usermode
helper. The base code for the UMH was introduced in 2018, and
couple of attempts (2, 3) tried to introduce the BPF program
generate features but were abandoned.
bpfilter now sits in a kernel tree unused and unusable, occasionally
causing confusion amongst Linux users (4, 5).
As bpfilter is now developed in a dedicated repository on GitHub (6),
it was suggested a couple of times this year (LSFMM/BPF 2023,
LPC 2023) to remove the deprecated kernel part of the project. This
is the purpose of this patch.
[1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/
[2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t
[3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/
[4]: https://dxuuu.xyz/bpfilter.html
[5]: https://github.com/linuxkit/linuxkit/pull/3904
[6]: https://github.com/facebook/bpfilter
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After merging the patch set [1] to reduce memory usage
for bpf_global_percpu_ma, Alexei found a redundant check (cpu == 0)
in function bpf_mem_alloc_percpu_unit_init() ([2]).
Indeed, the check is unnecessary since c->unit_size will
be all NULL or all non-NULL for all cpus before
for_each_possible_cpu() loop.
Removing the check makes code less confusing.
[1] https://lore.kernel.org/all/20231222031729.1287957-1-yonghong.song@linux.dev/
[2] https://lore.kernel.org/all/20231222031745.1289082-1-yonghong.song@linux.dev/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240104165744.702239-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
User won't care about inproper hash options in the TCP header if they
don't use neither TCP-AO nor TCP-MD5. Yet, those logs can add up in
syslog, while not being a real concern to the host admin:
> kernel: TCP: TCP segment has incorrect auth options set for XX.20.239.12.54681->XX.XX.90.103.80 [S]
Keep silent and avoid logging when there aren't any keys in the system.
Side-note: I also defined static_branch_tcp_*() helpers to avoid more
ifdeffery, going to remove more ifdeffery further with their help.
Reported-by: Christian Kujau <lists@nerdbynature.de>
Closes: https://lore.kernel.org/all/f6b59324-1417-566f-a976-ff2402718a8d@nerdbynature.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 2717b5adea9e ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Link: https://lore.kernel.org/r/20240104-tcp_hash_fail-logs-v1-1-ff3e1f6f9e72@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)
This series contains updates to i40e, ice, and igc drivers.
Ke Xiao fixes use after free for unicast filters on i40e.
Andrii restores VF MSI-X flag after PCI reset on i40e.
Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.
Rodrigo Cataldo corrects value used for hicredit calculations on igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
====================
Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rockchip_drm_fb.h header contains just a single function which is
not directly used by the VOP2 driver. Drop the unnecessary include.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104143951.85219-1-cristian.ciocaltea@collabora.com
|
|
This reverts commit b28ff7a7c3245d7f62acc20f15b4361292fe4117.
The commit introduced P2SB device scan and resource cache during the
boot process to avoid deadlock. But it caused detection failure of
IDE controllers on old systems [1]. The IDE controllers on old systems
and P2SB devices on newer systems have same PCI DEVFN. It is suspected
the confusion between those two is the failure cause. Revert the change
at this moment until the proper solution gets ready.
Link: https://lore.kernel.org/platform-driver-x86/CABq1_vjfyp_B-f4LAL6pg394bP6nDFyvg110TOLHHb0x4aCPeg@mail.gmail.com/T/#m07b30468d9676fc5e3bb2122371121e4559bb383 [1]
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240104114050.3142690-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(),
that is relying on kernfs to determine the right cgroup associated to
the target id.
As a kfunc, it has the potential to be attached to any function through
BPF, particularly in contexts where certain locks are held.
However, kernfs is not using an irq safe spinlock for kernfs_idr_lock,
that means any kernfs function that is acquiring this lock can be
interrupted and potentially hit bpf_cgroup_from_id() in the process,
triggering a deadlock.
For example, it is really easy to trigger a lockdep splat between
kernfs_idr_lock and rq->_lock, attaching a small BPF program to
__set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id():
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.7.0-rc7-virtme #5 Not tainted
-----------------------------------------------------
repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80
and this task is already holding:
ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0
which would create a new lock dependency:
(&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&rq->__lock){-.-.}-{2:2}
... which became HARDIRQ-irq-safe at:
lock_acquire+0xbf/0x2b0
_raw_spin_lock_nested+0x2e/0x40
scheduler_tick+0x5d/0x170
update_process_times+0x9c/0xb0
tick_periodic+0x27/0xe0
tick_handle_periodic+0x24/0x70
__sysvec_apic_timer_interrupt+0x64/0x1a0
sysvec_apic_timer_interrupt+0x6f/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
memcpy+0xc/0x20
arch_dup_task_struct+0x15/0x30
copy_process+0x1ce/0x1eb0
kernel_clone+0xac/0x390
kernel_thread+0x6f/0xa0
kthreadd+0x199/0x230
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
to a HARDIRQ-irq-unsafe lock:
(kernfs_idr_lock){+.+.}-{2:2}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xbf/0x2b0
_raw_spin_lock+0x30/0x40
__kernfs_new_node.isra.0+0x83/0x280
kernfs_create_root+0xf6/0x1d0
sysfs_init+0x1b/0x70
mnt_init+0xd9/0x2a0
vfs_caches_init+0xcf/0xe0
start_kernel+0x58a/0x6a0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xc5/0xe0
secondary_startup_64_no_verify+0x178/0x17b
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kernfs_idr_lock);
local_irq_disable();
lock(&rq->__lock);
lock(kernfs_idr_lock);
<Interrupt>
lock(&rq->__lock);
*** DEADLOCK ***
Prevent this deadlock condition converting kernfs_idr_lock to a raw irq
safe spinlock.
The performance impact of this change should be negligible and it also
helps to prevent similar deadlock conditions with any other subsystems
that may depend on kernfs.
Fixes: 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231229074916.53547-1-andrea.righi@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The lock_class_key is still registered and can be found in
lock_keys_hash hlist after subsys_private is freed in error
handler path.A task who iterate over the lock_keys_hash
later may cause use-after-free.So fix that up and unregister
the lock_class_key before kfree(cp).
On our platform, a driver fails to kset_register because of
creating duplicate filename '/class/xxx'.With Kasan enabled,
it prints a invalid-access bug report.
KASAN bug report:
BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc
Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252
Pointer tag: [15], memory tag: [fe]
CPU: 7 PID: 252 Comm: modprobe Tainted: G W
6.6.0-mainline-maybe-dirty #1
Call trace:
dump_backtrace+0x1b0/0x1e4
show_stack+0x2c/0x40
dump_stack_lvl+0xac/0xe0
print_report+0x18c/0x4d8
kasan_report+0xe8/0x148
__hwasan_store8_noabort+0x88/0x98
lockdep_register_key+0x19c/0x1bc
class_register+0x94/0x1ec
init_module+0xbc/0xf48 [rfkill]
do_one_initcall+0x17c/0x72c
do_init_module+0x19c/0x3f8
...
Memory state around the buggy address:
ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a
ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe
>ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
^
ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03
As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access
not use-after-free here.In this case, modprobe is manipulating
the corrupted lock_keys_hash hlish where lock_class_key is already
freed before.
It's worth noting that this only can happen if lockdep is enabled,
which is not true for normal system.
Fixes: dcfbb67e48a2 ("driver core: class: use lock_class_key already present in struct subsys_private")
Cc: stable <stable@kernel.org>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20231220024603.186078-1-jing.xia@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
core-1 core-2
-------------------------------------------------------
uio_unregister_device uio_open
idev = idr_find()
device_unregister(&idev->dev)
put_device(&idev->dev)
uio_device_release
get_device(&idev->dev)
kfree(idev)
uio_free_minor(minor)
uio_release
put_device(&idev->dev)
kfree(idev)
-------------------------------------------------------
In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
freed.
To address this issue, we can get idev atomic & inc idev reference with
minor_lock.
Fixes: 57c5f4df0a5a ("uio: fix crash after the device is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some error event IDs for Versal and Versal NET are different.
Both the platforms should access their respective error event
IDs so use sub_family_code to check for platform and check
error IDs for respective platforms. The family code is passed
via platform data to avoid platform detection again.
Platform data is setup when even driver is registered.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231219055025.27570-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Export zynqmp_pm_get_family_info() to access and find family information
in other module.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231219055025.27570-2-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit '4f628248a578 kbuild: reintroduce ALLSOURCE_ARCHS support for
tags/cscope', find_sources only invoke find_arch_sources.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jike Song <albcamus@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-4-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In bash, "! -z" is equivalent to "-n", which seems to be more intuitive.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20231229030654.17474-3-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 'f81b1be40c44 tags: include headers before source files'
introduce two local variables.
Let's add local annotation to make it obvious.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-2-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the manual, -path is more portable than -wholename. Also
for consistency, let's use -path here.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
CC: WANG Cong <xiyou.wangcong@gmail.com>
CC: Michal Marek <mmarek@suse.cz>
Link: https://lore.kernel.org/r/20231229030654.17474-1-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit f4ed1009fcea ("kbuild: add GNU GLOBAL tags generation") added
support for the GNU Global source tagging system. However, this addition
was not reflected in the script's header comment.
Fixes: f4ed1009fcea ("kbuild: add GNU GLOBAL tags generation")
Signed-off-by: René Nyffenegger <mail@renenyffenegger.ch>
Link: https://lore.kernel.org/r/20231217082719.4747-1-mail@renenyffenegger.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b5a82472a6d61608c2cd7728ca364f6c88a821c3.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/9074d1ad2e889425991fecad664781ae27b2418a.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/e574041cdce2e4e69f729dfa726a6d090762cff9.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/06df45c697a747cb6543800a4613db6e1f5462b4.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/5df31ef3c069f45634631c9c639bbb60ab1d4798.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/8d7d86a24ea36985845c17b6da0933fedbf99ad8.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e2ea8abb4c30190392a86cf05cecd722d0f0b493.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/d323e4f24bfab3ac1480933deb51e7c5cb025b09.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e7b4bc389949c3613a358bd8e57d70d7acd5552b.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/86165c8ccd0bb47000a29e711102795b36c8df41.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DT binding for the reg-mux compatible states it can be used when the
"parent device of mux controller is not syscon device". It also allows
for a reg property. When the reg property is provided, use that to
identify the address space for this mux. If not provided fallback to
using the parent device as a regmap provider.
While here use dev_err_probe() in the error path to prevent printing
a message on probe defer which now can happen in extra ways.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20240104154552.17852-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.
lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:
[ 82.313527] ------------[ cut here ]------------
[ 82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[ 82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[ 82.314767] Call Trace:
[ 82.314770] <TASK>
[ 82.314772] ? _regulator_put+0x219/0x230
[ 82.314777] ? __warn+0x81/0x170
[ 82.314784] ? _regulator_put+0x219/0x230
[ 82.314791] ? report_bug+0x18d/0x1c0
[ 82.314801] ? handle_bug+0x3c/0x80
[ 82.314806] ? exc_invalid_op+0x13/0x60
[ 82.314812] ? asm_exc_invalid_op+0x16/0x20
[ 82.314845] ? _regulator_put+0x219/0x230
[ 82.314857] regulator_bulk_free+0x39/0x60
[ 82.314865] i2c_device_remove+0x22/0xb0
Add the missing setting of the callback so that the regulators
properly get turned off again when not used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PCI_VENDOR_ID_REDHAT is already defined in pci_ids.h. Kill the dup.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231221140921.2760432-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ssam_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
It's also never used outside of
drivers/platform/surface/aggregator/bus.c so make it static and don't
export it as no one is using it.
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <platform-driver-x86@vger.kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121957-tapered-upswing-8326@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use helper pm_runtime_resume_and_get() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c3045427-da42-4f7c-8a96-3c4756646cd0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DDR3 SPD data structure advertises the presence of a thermal
sensor on a DDR3 module in byte 32, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.
The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.
Note: Thermal sensors on DDR4 DIMM's are instantiated from the
ee1004 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The EE1004 SPD data structure advertises the presence of a thermal
sensor on a DDR4 module in byte 14, bit 7. Let's use this information
to explicitly instantiate the thermal sensor I2C client instead of
having to rely on class-based I2C probing.
The temp sensor i2c address can be derived from the SPD i2c address,
so we can directly instantiate the device and don't have to probe
for it. If the temp sensor has been instantiated already by other
means (e.g. class-based auto-detection), then the busy-check in
i2c_new_client_device will detect this.
Patch was successfully tested with a Corsair Vengeance RGB PRO
DDR4 module which comes with a thermal sensor.
Link: https://www.spinics.net/lists/linux-i2c/msg65963.html
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/aa063dfb-2a92-40ba-bdab-e972781ae84b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the moxtet_bus_type to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/2023121939-written-guru-db83@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason, moxtet_type was defined in moxtet.h, but never actually
used. Looks like a left-over from the original commit that was
exporting the moxtet bus type, but that wasn't needed, and it was a
different variable name, so no one noticed this one dangling around.
Cc: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/2023121937-pants-heroics-17c1@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We added locking to this function but these two error paths were
accidentally overlooked.
Fixes: f0af81683466 ("cdx: Introduce lock to protect controller ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/a7994b47-6f78-4e2c-a30a-ee5995d428ec@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a missing call to of_node_put(np) on error.
There was a second error path where "np" was NULL, but that situation is
impossible. The for_each_compatible_node() loop iterator is always
non-NULL. Just deleted that error path.
Fixes: 54b406e10f03 ("cdx: Remove cdx controller list from cdx bus system")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/2e66efc4-a13a-4774-8c9d-763455fe4834@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
