summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-07drm/amdgpu: fix coding style in the scheduler v2Christian König
v2: fix even more Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the CI code to enable sclk OD(OverDrive)Eric Huang
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the CI code to enable clock level selectionEric Huang
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the new common pm code to support sclk ODEric Huang
This extends OD (OverDrive) support to the non-Powerplay code paths. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the new common pm code to select the clock levelsEric Huang
This extends dpm clock level selection to the non-powerplay code paths. This interface can be used to select individual clock levels. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: Enable GFX PG on CZTom St Denis
Based on Alex's patches this enables GFX PG on CZ. Tested with xonotic-glx/glxgears/supertuxkart and idle desktop. Also read-back registers via umr for verificiation that the bits are truly enabled. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: clean up polaris11 PG enableAlex Deucher
Fix the logic for enabling/disabling. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: add powergating support for CZ/STAlex Deucher
This implements powergating support for CZ/ST asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add new GFX powergating typesAlex Deucher
Add some new GFX powergating flags. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: rename some pg functionsAlex Deucher
So they can be shared with other asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: add state setup for CZ/ST GFX power gatingAlex Deucher
This sets up the CP jump table and GDS buffer and sets the PG state registers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon/gfx7: expand cp jt size to handle GDS as wellAlex Deucher
The size needs to handle the CP JT and GDS. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: expand cp jt size to handle GDS as wellAlex Deucher
The size needs to handle the CP JT and GDS. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on Polaris10Eric Huang
This implements sclk overdrive(OD) overclocking support for Polaris10, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on TongaEric Huang
This implements sclk overdrive(OD) overclocking support for Tonga, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on FijiEric Huang
This implements sclk overdrive(OD) overclocking support for Fiji, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add powerplay sclk OD support through sysfs (v2)Eric Huang
Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking, the entry is read/write, the value of input/output is an integer which is the over percentage of the highest sclk. v2: drop extra semicolon Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: load different smc firmware on some CI variantsAlex Deucher
The power tables on some variants require different firmware. This may fix stability issues on some newer CI parts. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91880 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: load different smc firmware on some SI variantsAlex Deucher
The power tables on some variants require different firmware. This may fix stability issues on some newer SI parts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: load different smc firmware on some CI variantsAlex Deucher
The power tables on some variants require different firmware. This fixes stability issues on some newer CI parts. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91880 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: clear RB at ring initMonk Liu
This help fix reloading driver hang issue of SDMA ring. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07ipvs: fix bind to link-local mcast IPv6 address in backupQuentin Armitage
When using HEAD from https://git.kernel.org/cgit/utils/kernel/ipvsadm/ipvsadm.git/, the command: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group ff02::1:81 fails with the error message: Argument list too long whereas both: ipvsadm --start-daemon master --mcast-interface eth0.60 \ --mcast-group ff02::1:81 and: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group 224.0.0.81 are successful. The error message "Argument list too long" isn't helpful. The error occurs because an IPv6 address is given in backup mode. The error is in make_receive_sock() in net/netfilter/ipvs/ip_vs_sync.c, since it fails to set the interface on the address or the socket before calling inet6_bind() (via sock->ops->bind), where the test 'if (!sk->sk_bound_dev_if)' failed. Setting sock->sk->sk_bound_dev_if on the socket before calling inet6_bind() resolves the issue. Fixes: d33288172e72 ("ipvs: add more mcast parameters for the sync daemon") Signed-off-by: Quentin Armitage <quentin@armitage.org.uk> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2016-07-07arm64: Enable workaround for Cavium erratum 27456 on thunderx-81xxGanapatrao Kulkarni
Cavium erratum 27456 commit 104a0c02e8b1 ("arm64: Add workaround for Cavium erratum 27456") is applicable for thunderx-81xx pass1.0 SoC as well. Adding code to enable to 81xx. Signed-off-by: Ganapatrao Kulkarni <gkulkarni@cavium.com> Reviewed-by: Andrew Pinski <apinski@cavium.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-07drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.Rodrigo Vivi
Some Kabylake SKUs are going to use Kabypoint PCH. It is mainly for Halo and DT ones. >From our specs it doesn't seem that KBP brings any change on the display south engine. So let's consider this as a continuation of SunrisePoint, i.e., SPT+. Since it is easy to get confused by a letter change: KBL = Kabylake - CPU/GPU codename. KBP = Kabypoint - PCH codename. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96826 Link: http://patchwork.freedesktop.org/patch/msgid/1467418032-15167-1-git-send-email-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2016-07-07arm64: kernel: Save and restore UAO and addr_limit on exception entryJames Morse
If we take an exception while at EL1, the exception handler inherits the original context's addr_limit and PSTATE.UAO values. To be consistent always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This prevents accidental re-use of the original context's addr_limit. Based on a similar patch for arm from Russell King. Cc: <stable@vger.kernel.org> # 4.6- Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-07drm/i915:gen9: implement WaMediaPoolStateCmdInWABBTim Gore
This patch applies WaMediaPoolStateCmdInWABB which fixes a problem with the restoration of thread counts on resuming from RC6. References: HSD#2137167 Signed-off-by: Tim Gore <tim.gore@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com
2016-07-07xenbus: don't BUG() on user mode induced conditionJan Beulich
Inability to locate a user mode specified transaction ID should not lead to a kernel crash. For other than XS_TRANSACTION_START also don't issue anything to xenbus if the specified ID doesn't match that of any active transaction. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-07drm/i915: Check for invalid cloning earlier during modesetVille Syrjälä
Move the encoder cloning check to happen earlier in the modeset. The main benefit will be that the debug output from a failed modeset will be less confusing as output_types can not indicate an invalid configuration during the later computation stages. For instance, what happened to me was kms_setmode was attempting one of its invalid cloning checks during which it asked for DP+VGA cloning on HSW. In this case the DP .compute_config() was executed after the FDI .compute_config() leaving the DP link clock (1.62 in this case) in port_clock, and then later the FDI BW computation tried to use that as the FDI link clock (which should always be 2.7). 1.62 x 2 wasn't enough for the mode it was trying to use, and so it ended up rejecting the modeset, not because of an invalid cloning configuration, but because of supposedly running out of FDI bandwidth. Took me a while to figure out what had actually happened. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-12-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Simplify hdmi_12bpc_possible()Ville Syrjälä
With the output_types bitmask there's no need to loop through the encoders anymore when checking for HDMI+non-HDMI cloning. v2: Use output_types bitmask v3: Fix the logic to really check that there are no non-HDMI encoders Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v2) Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-11-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Kill has_dsi_encoderVille Syrjälä
has_dsi_encoder was introduced to indicate that the pipe is driving a DSI encoder. Now that we have the output_types bitmask that can tell us the same thing, let's just kill has_dsi_encoder. v2: Rebase, handle BXT DSI transcoder, rewrote commit message Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-10-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: s/INTEL_OUTPUT_DISPLAYPORT/INTEL_OUTPUT_DP/Ville Syrjälä
INTEL_OUTPUT_DISPLAYPORT hsa been bugging me for a long time. It always looks out of place besides INTEL_OUTPUT_EDP and INTEL_OUTPUT_DP_MST. Let's just rename it to INTEL_OUTPUT_DP. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-9-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Replace some open coded intel_crtc_has_dp_encoder()sVille Syrjälä
A bunch of places still look for DP encoders manually. Just call intel_crtc_has_dp_encoder(). Note that many of these places don't look for EDP or DP_MST, but it's still fine to replace them because * for audio we don't enable audio on eDP anyway * the code that lack DP MST check is only for plaforms that don't support MST anyway v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-8-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Kill has_dp_encoder from pipe_configVille Syrjälä
Use the new output_types bitmask instead of has_dp_encoder. To make it less oainlful provide a small helper (intel_crtc_has_dp_encoder()) to do the bitsy stuff. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-7-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Replace manual lvds and sdvo/hdmi counting with intel_crtc_has_type()Ville Syrjälä
Since we now have the output_types bitmaks in the crtc state, there's no need to iterate through all the encoders to see if an LVDS or SDVO/HDMI encoder might be present. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-6-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Unify intel_pipe_has_type() and intel_pipe_will_have_type()Ville Syrjälä
With the introduction of the output_types mask, intel_pipe_has_type() and intel_pipe_will_have_type() are basically the same thing. Replace them with a new intel_crtc_has_type() (identical to intel_pipe_will_have_type() actually). v2: Rebase v3: Make intel_crtc_has_type() static inline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v2) Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-5-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Add output_types bitmask into the crtc stateVille Syrjälä
Rather than looping through encoders to see which encoder types are being driven by the pipe, add an output_types bitmask into the crtc state and populate it prior to compute_config and during state readout. v2: Determine output_types before .compute_config() hooks are called Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-4-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Remove encoder type checks from MST suspend/resumeVille Syrjälä
Now that eDP encoders won't have can_mst==true, we can throw out the encoder type checks from the MST suspend/resume paths. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-3-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Don't mark eDP encoders as MST capableVille Syrjälä
If we've determined that the encoder is eDP, we shouldn't try to use MST on it. Or at least the code doesn't seem to expect that since there are some type==DP checks in the MST code. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-2-git-send-email-ville.syrjala@linux.intel.com
2016-07-07perf/core: Fix pmu::filter_match for SW-led groupsMark Rutland
The following commit: 66eb579e66ec ("perf: allow for PMU-specific event filtering") added the pmu::filter_match() callback. This was intended to avoid HW constraints on events from resulting in extremely pessimistic scheduling. However, pmu::filter_match() is only called for the leader of each event group. When the leader is a SW event, we do not filter the groups, and may fail at pmu::add() time, and when this happens we'll give up on scheduling any event groups later in the list until they are rotated ahead of the failing group. This can result in extremely sub-optimal event scheduling behaviour, e.g. if running the following on a big.LITTLE platform: $ taskset -c 0 ./perf stat \ -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \ -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \ ls <not counted> context-switches (0.00%) <not counted> armv8_cortex_a57/config=0x11/ (0.00%) 24 context-switches (37.36%) 57589154 armv8_cortex_a53/config=0x11/ (37.36%) Here the 'a53' event group was always eligible to be scheduled, but the 'a57' group never eligible to be scheduled, as the task was always affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57' group was eligible, but the HW event failed at pmu::add() time, resulting in ctx_flexible_sched_in giving up on scheduling further groups with HW events. One way of avoiding this is to check pmu::filter_match() on siblings as well as the group leader. If any of these fail their pmu::filter_match() call, we must skip the entire group before attempting to add any events. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Fixes: 66eb579e66ec ("perf: allow for PMU-specific event filtering") Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-06ARM: tegra: beaver: Allow SD card voltage to be changedLucas Stach
This allows to switch the card signal voltage level to 1.8 V, which is needed for any ultra high speed modes to work. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-07Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Just one fix for a stupid thinko in a DP training pattern commit. * 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern
2016-07-07Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a couple of fixes for amdgpu for 4.7: - 2 small tonga powerplay fixes - Additional Polaris fixes * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation. drm/amd/powerplay: fix bug that get wrong polaris evv voltage. drm/amd/powerplay: incorrectly use of the function return value drm/amd/powerplay: fix incorrect voltage table value for tonga drm/amd/powerplay: fix incorrect voltage table value for polaris10
2016-07-06init/Kconfig: keep Expert users menu togetherRandy Dunlap
The "expert" menu was broken (split) such that all entries in it after KALLSYMS were displayed in the "General setup" area instead of in the "Expert users" area. Fix this by adding one kconfig dependency. Yes, the Expert users menu is fragile. Problems like this have happened several times in the past. I will attempt to isolate the Expert users menu if there is interest in that. Fixes: 4d5d5664c900 ("x86: kallsyms: disable absolute percpu symbols on !SMP") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: stable@vger.kernel.org # 4.6 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-06drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation.Rex Zhu
As get the right evv voltage, update them to latest coefficients to align with BB. agd: squash in Slava's 32 bit build fix Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-06drm/amd/powerplay: fix bug that get wrong polaris evv voltage.Rex Zhu
value is 32 bits for polaris, not 16. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-06drm/amd/powerplay: incorrectly use of the function return valueRex Zhu
'0' means true. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-07-06drm/amd/powerplay: fix incorrect voltage table value for tongaHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-07-06drm/amd/powerplay: fix incorrect voltage table value for polaris10Huang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) All users of AF_PACKET's fanout feature want a symmetric packet header hash for load balancing purposes, so give it to them. 2) Fix vlan state synchronization in e1000e, from Jarod Wilson. 3) Use correct socket pointer in ip_skb_dst_mtu(), from Shmulik Ladkani. 4) mlx5 bug fixes from Mohamad Haj Yahia, Daniel Jurgens, Matthew Finlay, Rana Shahout, and Shaker Daibes. Mostly to do with operation timeouts and PCI error handling. 5) Fix checksum handling in mirred packet action, from WANG Cong. 6) Set skb->dev correctly when transmitting in !protect_frames case of macsec driver, from Daniel Borkmann. 7) Fix MTU calculation in geneve driver, from Haishuang Yan. 8) Missing netif_napi_del() in unregister path of qeth driver, from Ursula Braun. 9) Handle malformed route netlink messages in decnet properly, from Vergard Nossum. 10) Memory leak of percpu data in ipv6 routing code, from Martin KaFai Lau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ipv6: Fix mem leak in rt6i_pcpu net: fix decnet rtnexthop parsing cxgb4: update latest firmware version supported net/mlx5: Avoid setting unused var when modifying vport node GUID bonding: fix enslavement slave link notifications r8152: fix runtime function for RTL8152 qeth: delete napi struct when removing a qeth device Revert "fsl/fman: fix error handling" fsl/fman: fix error handling cdc_ncm: workaround for EM7455 "silent" data interface RDS: fix rds_tcp_init() error path geneve: fix max_mtu setting net: phy: dp83867: Fix initialization of PHYCR register enc28j60: Fix race condition in enc28j60 driver net: stmmac: Fix null-function call in ISR on stmmac1000 tipc: fix nl compat regression for link statistics net: bcmsysport: Device stats are unsigned long macsec: set actual real device for xmit when !protect_frames net_sched: fix mirrored packets checksum packet: Use symmetric hash for PACKET_FANOUT_HASH. ...
2016-07-06Merge tag 'sound-4.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes: at this time, we've got a slightly high amount, but all small and trivial fixes, and nothing scary can be seen there" * tag 'sound-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup ALSA: timer: Fix negative queue usage by racy accesses ASoC: rt5645: fix reg-2f default value. ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift() ALSA: hda - Add PCI ID for Kabylake-H ALSA: echoaudio: Fix memory allocation ASoC: Intel: atom: fix missing breaks that would cause the wrong operation to execute ALSA: hda - fix read before array start ASoC: cx20442: set tty->receiver_room in v253_open ASoC: ak4613: Enable cache usage to fix crashes on resume ASoC: wm8940: Enable cache usage to fix crashes on resume ASoC: Intel: Skylake: Initialize module list for Broxton ASoC: wm5102: Correct supported channels on trace compressed DAI ASoC: wm5110: Add missing route from OUT3R to SYSCLK ASoC: rt5670: fix HP Playback Volume control ASoC: hdmi-codec: select CONFIG_HDMI ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG port ASoC: hdac_hdmi: Fix potential NULL dereference ASoC: ak4613: Remove owner assignment from platform_driver ...
generated by cgit (git 2.34.1) at 2025-09-14 16:54:45 +0000