summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-25VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.Pravin B Shelar
tunnel_ip_select_ident() is more efficient when generating ip-header id given inner packet is of ipv4 type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25IP_GRE: Fix IP-Identification.Pravin B Shelar
GRE-GSO generates ip fragments with id 0,2,3,4... for every GSO packet, which is not correct. Following patch fixes it by setting ip-header id unique id of fragments are allowed. As Eric Dumazet suggested it is optimized by using inner ip-header whenever inner packet is ipv4. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Merge branch 'wireless'David S. Miller
John W. Linville says: ==================== This is a batch of fixes intended for the 3.9 stream... Avinash Patil gives us a mwifiex fix to prevent a system freeze when that driver is unloaded. Daniel Drake brings a patch to avoid dropping the carrier flag across a suspend. This prevents improper packet drops. Wei Yongjun delivers a brcmfmac for a lock leak on an error path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-25ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86Thomas Renninger
Reflect this dependency in Kconfig, to prevent build failures. Shorten the config description as suggested by Borislav Petkov. Finding a suitable memory area to store the modified table(s) has been taken over from arch/x86/kernel/setup.c and makes use of max_low_pfn_mapped: memblock_find_in_range(0, max_low_pfn_mapped,...) This one is X86 specific. It may not be hard to extend this functionality for other ACPI aware architectures if there is need for. For now make this feature only available for X86 to avoid build failures on IA64, compare with: https://bugzilla.kernel.org/show_bug.cgi?id=54091 Signed-off-by: Thomas Renninger <trenn@suse.de> Link: http://lkml.kernel.org/r/1361538742-67599-3-git-send-email-trenn@suse.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-25IB/mlx4: Advertise MW supportShani Michaeli
Indicate memory windows support through device capabilities, kernel verb entries and the relevant uverbs command mask entries. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Support memory window bindingShani Michaeli
* Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4: Implement memory windows allocation and deallocationShani Michaeli
Implement MW allocation and deallocation in mlx4_core and mlx4_ib. Pass down the enable bind flag when registering memory regions. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4_core: Enable memory windows in {INIT, QUERY}_HCAShani Michaeli
Add memory windows-related code to INIT_HCA and QUERY_HCA. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4_core: Disable memory windows for virtual functionsShani Michaeli
Do not enable memory windows allocation for virtual functions. In addition, add a few safety checks, such as: * Verifying the PD of a new MPT matches the VF. * Making sure binding memory window isn't enabled for FMRs, and that new memory windows are not FMR themselves. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IPoIB: Free ipoib neigh on path record failure so path rec queries are retriedRoland Dreier
If IPoIB fails to look up a path record (eg if it tries during an SM failover when one SM is dead but the new one hasn't taken over yet), the driver ends up with a neighbour structure but no address handle (AH). There's no mechanism to recover from this: any further packets sent to this destination will be silently dumped in ipoib_start_xmit(). Fix this by freeing the neighbour structures when a path rec query fails, so that the next packet queued to be sent will trigger a new path record query. Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Fail I/O requests if the transport is offlineBart Van Assche
If an SRP target is no longer reachable and srp_reset_host() fails to reconnect then ib_srp will invoke scsi_remove_host(). That function will invoke __scsi_remove_device() for each LUN. And that last function will change the device state from SDEV_TRANSPORT_OFFLINE into SDEV_CANCEL. Certain user space software, e.g. older versions of multipathd, continue queueing I/O to SCSI devices that are in the SDEV_CANCEL state. If these I/O requests are submitted as SG_IO that means that the REQ_PREEMPT flag will be set and hence that these requests will be passed to srp_queuecommand(). These requests will time out. If new requests are queued fast enough from user space these active requests will prevent __scsi_remove_device() to finish. Avoid this by failing I/O requests in the SDEV_CANCEL state if the transport is offline. Introduce a new variable to keep track of the transport state instead of failing requests if (!target->connected || target->qp_in_error), so that the SCSI error handler has a chance to retry commands after a transport layer failure occurred. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid endless SCSI error handling loopBart Van Assche
If a SCSI command times out it is passed to the SCSI error handler. The SCSI error handler will try to abort the commands that timed out. If aborting fails, a device reset will be attempted. If the device reset also fails a host reset will be attempted. If the host reset also fails the whole procedure will be repeated. srp_abort() and srp_reset_device() fail for a QP in the error state. srp_reset_host() fails after host removal has started. Hence if the SCSI error handler gets invoked after host removal has started and with the QP in the error state an endless loop will be triggered. Modify the SCSI error handling functions in ib_srp as follows: - Abort SCSI commands properly even if the QP is in the error state. - Make srp_reset_host() reset SCSI requests even after host removal has already started or if reconnecting fails. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid sending a task management function needlesslyBart Van Assche
Do not send a task management function if sending will fail anyway because either there is no RDMA/RC connection or the QP is in the error state. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Track connection state properlyBart Van Assche
Remove an assignment that incorrectly overwrites the connection state update by srp_connect_target(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Fix compiler warning about uninitialized 'vlan' variablePaul Bolle
Building qp.o triggers this gcc warning: drivers/infiniband/hw/mlx4/qp.c: In function ‘mlx4_ib_post_send’: drivers/infiniband/hw/mlx4/qp.c:1862:62: warning: ‘vlan’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/mlx4/qp.c:1752:6: note: ‘vlan’ was declared here Looking at the code it is clear 'vlan' is only set and used if 'is_eth' is non-zero. But by initializing 'vlan' to 0xffff, on gcc (Ubuntu 4.7.2-22ubuntu1) 4.7.2 on x86-64 at least, we fix the warning, and the compiler was already setting 'vlan' to 0 in the generated code, so there's no real downside. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [ Get rid of unnecessary move of 'is_vlan' initialization. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Convert is_xxx variables in build_mlx_header() to boolRoland Dreier
Matches the way they're used, and actually lets at least x86-64 generate better code: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-38 (-38) function old new delta mlx4_ib_post_send 4416 4378 -38 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25[SCSI] ufs: Separate PCI code into glue driverVinayak Holikatti
This patch separates PCI code from ufshcd.c and makes it as a core driver module and adds a new file ufshcd-pci.c as PCI glue driver. [jejb: strip __devinit and devexit_p()] Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-25[SCSI] ufs: Segregate PCI Specific CodeVinayak Holikatti
This patch segregates the PCI specific code in ufshcd.c to make it ready for splitting into core ufs driver and PCI glue driver. Also copyright header modification to remove extra warranty disclaim. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-26block: fix part_pack_uuid() build errorMimi Zohar
Commit "85865c1 ima: add policy support for file system uuid" introduced a CONFIG_BLOCK dependency. This patch defines a wrapper called blk_part_pack_uuid(), which returns -EINVAL, when CONFIG_BLOCK is not defined. security/integrity/ima/ima_policy.c:538:4: error: implicit declaration of function 'part_pack_uuid' [-Werror=implicit-function-declaration] Changelog v2: - Reference commit number in patch description Changelog v1: - rename ima_part_pack_uuid() to blk_part_pack_uuid() - resolve scripts/checkpatch.pl warnings Changelog v0: - fix UUID scripts/Lindent msgs Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-25ARM: fix scheduling while atomic warning in alignment handling codeRussell King
Paolo Pisati reports that IPv6 triggers this warning: BUG: scheduling while atomic: swapper/0/0/0x40000100 Modules linked in: [<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c) [<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740) [<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34) [<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44) [<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c) [<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98) [<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0763d70 to 0xc0763db8) 3d60: e97e805e e97e806e 2c000000 11000000 3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c 3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff [<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8) Fix this by using probe_kernel_address() stead of __get_user(). Cc: <stable@vger.kernel.org> Reported-by: Paolo Pisati <p.pisati@gmail.com> Tested-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-25ARM: VFP: fix emulation of second VFP instructionRussell King
Martin Storsjö reports that the sequence: ee312ac1 vsub.f32 s4, s3, s2 ee702ac0 vsub.f32 s5, s1, s0 e59f0028 ldr r0, [pc, #40] ee111a90 vmov r1, s3 on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5) where s3 is a denormal and s2 is zero results in incorrect behaviour - the instruction "vsub.f32 s5, s1, s0" is not executed: VFP: bounce: trigger ee111a90 fpexc d0000780 VFP: emulate: INST=0xee312ac1 SCR=0x00000000 ... As we can see, the instruction triggering the exception is the "vmov" instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to properly take account of the FPEXC_FP2V flag in FPEXC. This is because the test for the second instruction register being valid is bogus, and will always skip emulation of the second instruction. Cc: <stable@vger.kernel.org> Reported-by: Martin Storsjö <martin@martin.st> Tested-by: Martin Storsjö <martin@martin.st> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-26ima: "remove enforce checking duplication" merge fixMimi Zohar
Commit "750943a ima: remove enforce checking duplication" combined the 'in IMA policy' and 'enforcing file integrity' checks. For the non-file, kernel module verification, a specific check for 'enforcing file integrity' was not added. This patch adds the check. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2013-02-25kbuild: Fix reading of .config in link-vmlinux.shMichal Marek
The shell '.' command is not required to search the current directory as a fallback and in fact newer versions of bash in sh-mode do not do this. Force reading the file from the current directory if $KCONFIG_CONFIG contains no '/'. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-25ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementationMarek Szyprowski
This patch removes page_address() usage in IOMMU-aware dma-mapping implementation and replaced it with direct use of the cpu virtual address provided by the caller. page_address() returned incorrect address for pages remapped in atomic pool, what caused memory leak. Reported-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hiroshi Doyu <hdoyu@nvidia.com>
2013-02-25ARM: dma-mapping: Add maximum alignment order for dma iommu buffersSeung-Woo Kim
Alignment order for a dma iommu buffer is set by buffer size. For large buffer, it is a waste of iommu address space. So configurable parameter to limit maximum alignment order can reduce the waste. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devicesMarek Szyprowski
IOMMU can provide access to any memory page, so there is no point in limiting the allocated pages only to lowmem, once other parts of dma-mapping subsystem correctly supports himem pages. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: add support for CMA regions placed in highmem zoneMarek Szyprowski
This patch adds missing pieces to correctly support memory pages served from CMA regions placed in high memory zones. Please note that the default global CMA area is still put into lowmem and is limited by optional architecture specific DMA zone. One can however put device specific CMA regions in high memory zone to reduce lowmem usage. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com>
2013-02-25arm: dma mapping: export arm iommu functionsPrathyush K
This patch adds EXPORT_SYMBOL_GPL calls to the three arm iommu functions - arm_iommu_create_mapping, arm_iommu_free_mapping and arm_iommu_attach_device. These three functions are arm specific wrapper functions for creating/freeing/using an iommu mapping and they are called by various drivers. If any of these drivers need to be built as dynamic modules, these functions need to be exported. Changelog v2: using EXPORT_SYMBOL_GPL as suggested by Marek. Signed-off-by: Prathyush K <prathyush.k@samsung.com> [m.szyprowski: extended with recently introduced EXPORT_SYMBOL_GPL(arm_iommu_detach_device)] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Add arm_iommu_detach_device()Hiroshi Doyu
A counter part of arm_iommu_attach_device(). Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Add macro to_dma_iommu_mapping()Hiroshi Doyu
This can be built without CONFIG_ARM_DMA_USE_IOMMU. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()Hiroshi Doyu
struct dma_map_ops iommu_ops doesn't have ->set_dma_mask, which causes crash when dma_set_mask() is called from some driver. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25ARM: iommu: Include linux/kref.h in asm/dma-iommu.hLaurent Pinchart
The dma_iommu_mapping structure defined in asm/dma-iommu.h embeds a struct kref, include the appropriate header file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-02-25fix compat truncate/ftruncateAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-25xen/acpi: xen cpu hotplug minor updatesLiu Jinsong
Recently at native Rafael did some cleanup for acpi, say, drop acpi_bus_add, remove unnecessary argument of acpi_bus_scan, and run acpi_bus_scan under acpi_scan_lock. This patch does similar cleanup for xen cpu hotplug, removing redundant logic, and adding lock. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-25xen/acpi: xen memory hotplug minor updatesLiu Jinsong
Dan Carpenter found current xen memory hotplug logic has potential issue: at func acpi_memory_get_device() *mem_device = acpi_driver_data(device); while the device may be NULL and then dereference. At native side, Rafael recently updated acpi_memory_get_device(), dropping acpi_bus_add, adding lock, and avoiding above issue. This patch updates xen memory hotplug logic accordingly, removing redundant logic, adding lock, and avoiding dereference. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-25ALSA: emu10k1: Allow to switch hardware sampe rate on EMUMihail Zenkov
Commit 57e5c63007955838043e34c732d224b2cbbb128f "emu10k1: allow to disable the SRC" force hardware use only one rate (48000 hz). EMU 0404/1010/1616 have support two hardware sampling rates (44100 and 48000 hz). This patch add check if we have EMU 0404/1010/1616 and choose correct sample rate to restrict. Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ARM: KVM: fix compilation after removal of user_alloc from struct ↵Marc Zyngier
kvm_memory_slot Commit 7a905b1 (KVM: Remove user_alloc from struct kvm_memory_slot) broke KVM/ARM by removing the user_alloc field from a public structure. As we only used this field to alert the user that we didn't support this operation mode, there is no harm in discarding this bit of code without any remorse. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-25ARM: KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTSMarc Zyngier
Commit bbacc0c (KVM: Rename KVM_MEMORY_SLOTS -> KVM_USER_MEM_SLOTS) broke KVM/ARM by changing a global #define. Apply the same change to fix the compilation breakage. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-25ARM: KVM: fix kvm_arch_{prepare,commit}_memory_regionMarc Zyngier
Commit f82a8cfe9 (KVM: struct kvm_memory_slot.user_alloc -> bool) broke the ARM KVM port by changing the prototype of two global functions. Apply the same change to fix the compilation breakage. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-02-25ALSA: hda - Enable beep for ASUS EeeBox EBP1501PTakashi Iwai
Reported-by: Harald Becker <ralda@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: emu10k1: Load firmware when it was already cachedFlorian Zeitz
This expands the regression fix from d28215996b0c3a900411769039aa3c54cf7008ab. The firmware also needs to be loaded when it was already cached. Signed-off-by: Florian Zeitz <florob@babelmonkeys.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: ice1724: M-Audio Audiophile192: Fix SPDIF inputJonas Petersen
This patch fixes initialization of the AK4114 chip so spdif capture is working properly. Worked out together with Pavel Hofman. Signed-off-by: Jonas Petersen <jnsptrsn1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: bt87x: Make load_all parameter working againTakashi Iwai
Along with a clean up commit [e9f66d9b9: ALSA: pci: clean up using module_pci_driver()], bt87x driver lost the functionality of load_all parameter. This patch does a partial revert of the commit only for bt87x.c to recover it. Reported-by: Clemens Ladisch <cladisch@googlemail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-24net/pasemi: Fix missing coding styleSyam Sidhardhan
Fix missing () & { } Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Some cleanups at V4L2 documentation - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor, sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging driver - Lots of missing MAINTAINERS entries added - several em28xx driver improvements, including its conversion to videobuf2 - several fixups on drivers to make them to better comply with the API - DVB core: add support for DVBv5 stats, allowing the implementation of statistics for new standards like ISDB - mb86a20s: add statistics to the driver - lots of new board additions, cleanups, and driver improvements. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits) [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff) [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F [media] em28xx: add usb id for terratec h5 rev. 3 [media] media: rc: gpio-ir-recv: add support for device tree parsing [media] mceusb: move check earlier to make smatch happy [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa [media] staging: media: Remove unnecessary OOM messages [media] sh_vou: Use vou_dev instead of vou_file wherever possible [media] sh_vou: Use video_drvdata() [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions [media] mt9t112: mt9t111 format set up differs from mt9t112 [media] sh-mobile-ceu-camera: fix SHARPNESS control default Revert "[media] fc0011: Return early, if the frequency is already tuned" [media] cx18/ivtv: fix regression: remove __init from a non-init function [media] em28xx: fix analog streaming with USB bulk transfers [media] stv0900: remove unnecessary null pointer check [media] fc0011: Return early, if the frequency is already tuned [media] fc0011: Add some sanity checks and cleanups [media] fc0011: Fix xin value clamping Revert "[media] [PATH,1/2] mxl5007 move reset to attach" ...
2013-02-24Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: 1) apply, and then revert, the sysfs export of ATA host controller number. Discussion was continuing after patch application, trying to figure out how to best mesh exported data with the installers, boot-time agents and other parties that want this info. 2) Merge Zero-Power Optical Device Driver (ZPODD) support, bringing the wonderfulness of sane power management to your CD/DVD device. Includes one SCSI-subsystem patch (with appropriate ACKs), adding runtime PM support to 'sr' driver. That is the ZPODD interaction bits. Patchset went through some 13 revisions before it got here; kudos to Intel for persistence. 3) pata_samsung_cf: use devm_clk_get() 4) more ata_piix, ahci PCI IDs 5) Add SATA driver for R-Car SoC 6) Convert libata to use devm_ioremap_resource (Note: I think Greg sent this to you, also) 7) Set proper Sense Key (SK) in the SCSI simulator when ATA passthrough indicates check condition. Google and specification hawks everywhere shall rejoice. * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (22 commits) [libata] fix smatch warning for zpodd_wake_dev [libata] Set proper SK when CK_COND is set. [libata] Convert to devm_ioremap_resource() libata: add R-Car SATA driver ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add Device IDs for Intel Wellsburg PCH [SCSI] remove can_power_off flag from scsi_device [libata] scsi: no poll when ODD is powered off [SCSI] sr: support runtime pm ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs [libata] PM code cleanup for ata port [libata] pm: differentiate system and runtime pm for ata port Revert "libata: export host controller number thru /sys" libata: do not suspend port if normal ODD is attached libata: expose pm qos flags for ata device libata: handle power transition of ODD libata: check zero power ready status for ZPODD libata: move acpi notification code to zpodd libata: identify and init ZPODD devices ...
2013-02-24tty vt: fix character insertion overflowNicolas Pitre
Commit 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") broke insert_char() in multiple ways. Then commit b1a925f44a3a ("tty vt: Fix a regression in command line edition") partially fixed it. However, the buffer being moved is still too large and overflowing beyond the end of the current line, corrupting existing characters on the next line. Example test case: echo -e "abc\nde\x1b[A\x1b[4h \x1b[4l\x1b[B" Expected result: ab c de Current result: ab c e Needless to say that this is very annoying when inserting words in the middle of paragraphs with certain text editors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: Jean-François Moine <moinejf@free.fr> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 19:43:38 +0000