summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-25qla2xxx: Fix sparse warning in qla_iocb.c file.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Move warning message to debug level.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fail adapter initialization on load ram failure.Chad Dupuis
If we fail to load one of the segments of firmware fail the operation instead of trying to continue which will lead to a system crash since the pointers to the next segment will not be updated correctly. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Disable PCI device in shutdown handler.Chad Dupuis
Disable the PCI device during shutdown to prevent any races with other PCI code such as the AER handling code. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Mark port lost when we receive an RSCN for it.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Restore WWPN in case of Loop Dead.Himanshu Madhani
For FA-WWPN capable device, ISP2031 and ISP27XX, when loop dead is detected by a driver, restore WWPN from NVRAM. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Honor FCP_RSP retry delay timer field.Chad Dupuis
Parse the retry delay timer field from the FCP response data and if: - It is not zero - The SCSI status is busy or queue full return SCSI_MLQUEUE_TARGET_BUSY for the number of milliseconds specified in the retry delay timer field. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add missing ISP27xx checks to optrom code.Alex Vechersky
Signed-off-by: Alex Vechersky <alex.vechersky@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Force use of mailbox interface for flash access commands for ISP27xx.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Free sysfs attributes for ISP27xx.Nigel Kirkland
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Disable laser for ISP2031 while unloading driver.Himanshu Madhani
Nameserver data on FC switch is not refreshed when qla2xxx driver is unloaded. Disabling laser for ISP2031 will force FC switch to rescan ports and clear fdmi entries from Nameserver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Enable diagnostic port using NVRAM parameters.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Declaration error cause stack corruption.Quinn Tran
Declaration error of mb array in qla2x00_iidma_fcport cause data to be written beyond the array. This ends up causing stack corruption. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add fix in driver unload for pending activity.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Unload of qla2xxx driver crashes the machine.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Allow user to change ql2xfdmienable value.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix driver version string message.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add diagnostic port functionality.Joe Carnuccio
Add support for the D-port (diagnostic port) fabric switch feature. (Fabric Switch initiates loopback style port testing) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add FA-WWN functionality.Joe Carnuccio
Add support for the FA-WWN (fabric assigned wwn) fabric switch feature. (Fabric Assigned World Wide Port Name) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add FDMI-2 functionality.Himanshu Madhani
Add support for the FDMI-2 fabric switch feature. Since FDMI-2 uses code from FDMI-1, some of the existing code needed to be repaired to prevent fields from being overflowed. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISPFx00 unexpected resets during adapter boot sequence.Jan Kulich
Signed-off-by: Jan Kulich <jan.kulich@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Incorrect linked list semantic in qlafx00_get_fcport().Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Incorrect debug level on mailbox command print 0x1111.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISPFX00 avoid writing semaphore register in request_irqs().Joe Carnuccio
Semaphore register does not exist for ISPFx00. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Fix potential return count bug in qla2xxx_get_vpd_field().Joe Carnuccio
Call scnprintf() instead of snprintf() since the latter may return an incorrect count in cases where the write is truncated to fit. scnprintf() returns the count of what was actually written; snprintf() returns the count of what would have been written. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP27xx fwdump template error print simplification.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP25xx multiqueue shadow register crash fix.Joe Carnuccio
When creating request/response queues from qla25xx_setup_mode(), the shadow index register pointers were not being initialized to point at the registers. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add endianizer to max_payload_size modifier.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Enable fast flash access for ISP83xx.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add ISP27xx fwdump template entry T275 (insert buffer).Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP27xx fwdump template fix insertbuf() routine.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP27xx fwdump template remove high frequency debug logs.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP27xx optimize fwdump entry table lookup.Joe Carnuccio
Since the entry call array is sorted in order of entry type opcode, the search can be terminated as soon as the search key is exceeded. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISP27xx add tests for incomplete template.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25mptfusion: enable no_write_same for vmware scsi disksChris J Arges
When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used data can be improperly zeroed out using the mptfusion driver. This patch disables write_same for this driver and the vmware subsystem_vendor which ensures that manual zeroing out is used instead. Cc: stable@vger.kernel.org BugLink: http://bugs.launchpad.net/bugs/1371591 Reported-by: Bruce Lucas <bruce.lucas@mongodb.com> Tested-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25SCHED: add some "wait..on_bit...timeout()" interfaces.NeilBrown
In commit c1221321b7c25b53204447cff9949a6d5a7ddddc sched: Allow wait_on_bit_action() functions to support a timeout I suggested that a "wait_on_bit_timeout()" interface would not meet my need. This isn't true - I was just over-engineering. Including a 'private' field in wait_bit_key instead of a focused "timeout" field was just premature generalization. If some other use is ever found, it can be generalized or added later. So this patch renames "private" to "timeout" with a meaning "stop waiting when "jiffies" reaches or passes "timeout", and adds two of the many possible wait..bit..timeout() interfaces: wait_on_page_bit_killable_timeout(), which is the one I want to use, and out_of_line_wait_on_bit_timeout() which is a reasonably general example. Others can be added as needed. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-25hpsa: add missing pci_set_master in kdump pathTomas Henzl
Add a call to pci_set_master(...) missing in the previous patch "hpsa: refine the pci enable/disable handling". Found thanks to Rob Elliot. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25arcmsr: simplify ioctl data read/writeChing Huang
Signed-off-by: Ching Huang <ching 2048@areca.com.tw> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25ipr: don't log error messages when applications issues illegal requestswenxiong@linux.vnet.ibm.com
Failing Device information are logged when IOA firmware detected these illegal request such as IOA firmware doesn't support inquiry with page code 2. The patch fixes the issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25Merge tag 'phy-for_3.18' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: Adds 3 new PHY drivers stih407, stih41x and rcar gen2 PHY. It also includes miscellaneous cleanup of other PHY drivers. Conflicts: MAINTAINERS
2014-09-25of/fdt: fix memory range checkSrinivas Kandagatla
In cases where board has below memory DT node memory{ device_type = "memory"; reg = <0x80000000 0x80000000>; }; Check on the memory range in fdt.c will always fail because it is comparing MAX_PHYS_ADDR with base + size, in fact it should compare it with base + size - 1. This issue was originally noticed on Qualcomm IFC6410 board. Without this patch kernel shows up noticed unnecessary warnings [ 0.000000] Machine model: Qualcomm APQ8064/IFC6410 [ 0.000000] Ignoring memory range 0xffffffff - 0x100000000 [ 0.000000] cma: Reserved 64 MiB at ab800000 as a result the size get reduced to 0x7fffffff which looks wrong. This patch fixes the check involved in generating this warning and as a result it also fixes the wrong size calculation. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> [grant.likely: adjust new size calculation also] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-09-25Merge tag 'usb-serial-3.17-final' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for v3.17 Here are two more device IDs for v3.17. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-25tty: Fix width of unsigned long bitfield paddingPeter Hurley
Commit c545b66c6922b002b5fe224a6eaec58c913650b5, 'tty: Serialize tcflow() with other tty flow control changes' and commit 99416322dd16b810ba74098cc50ef2a844091d35, 'tty: Workaround Alpha non-atomic byte storage in tty_struct' work around compiler bugs and non-atomic storage on multiple arches by padding bitfields out to the declared type which is unsigned long. However, the width varies by arch. Pad bitfields to actual width of unsigned long (which is BITS_PER_LONG). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25HID: sony: Update the DualShock 4 touchpad resolutionFrank Praznik
The DualShock 4 touchpad has been measured to have a resolution of 44.86 dots/mm which equates to 1920x942. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-25Bluetooth: Rename sco_param_wideband table to esco_param_msbcJohan Hedberg
The sco_param_wideband table represents the eSCO parameters for specifically mSBC encoding. This patch renames the table to the more descriptive esco_param_msbc name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-09-24NFS: don't use STABLE writes during writeback.NeilBrown
commit b31268ac793fd300da66b9c28bbf0a200339ab96 FS: Use stable writes when not doing a bulk flush was a bit heavy handed. The particular problem that lead to this patch was that small writes to an O_SYNC file we being written as UNSTABLE writes followed by a commit. This is appropriate for large writes (which require multiple NFS requests) but for small writes (single NFS request), using NFS_FILE_SYNC is more efficient. So that patch causes the code to select between the two methods depending on how many nfs requests get generated. Unfortunately this ends up applying to non O_SYNC writes as well. In particular if you memory-map a file and update random pages, then when they are eventually written out by writeback they will go as NFS_FILE_SYNC. This is inefficient and slows down the application. So: only set FLUSH_COND_STABLE when wbc->sync_mode is WB_SYNC_ALL. With this patch: O_SYNC writes are NFS_FILE_SYNC for single requests, and NFS_UNSTABLE followed by COMMIT for multiple requests Writing immediately before close of fsync follow the same pattern. Non-O_SYNC writes without an fsync of close eventually get flushed out as UNSTABLE and a commit follows eventually as appropriate. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24NFSv4: use exponential retry on NFS4ERR_DELAY for async requests.NeilBrown
Currently asynchronous NFSv4 request will be retried with exponential timeout (from 1/10 to 15 seconds), but async requests will always use a 15second retry. Some "async" requests are really synchronous though. The async mechanism is used to allow the request to continue if the requesting process is killed. In those cases, an exponential retry is appropriate. For example, if two different clients both open a file and get a READ delegation, and one client then unlinks the file (while still holding an open file descriptor), that unlink will used the "silly-rename" handling which is async. The first rename will result in NFS4ERR_DELAY while the delegation is reclaimed from the other client. The rename will not be retried for 15 seconds, causing an unlink to take 15 seconds rather than 100msec. This patch only added exponential timeout for async unlink and async rename. Other async calls, such as 'close' are sometimes waited for so they might benefit from exponential timeout too. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24rpc: Add -EPERM processing for xs_udp_send_request()Jason Baron
If an iptables drop rule is added for an nfs server, the client can end up in a softlockup. Because of the way that xs_sendpages() is structured, the -EPERM is ignored since the prior bits of the packet may have been successfully queued and thus xs_sendpages() returns a non-zero value. Then, xs_udp_send_request() thinks that because some bits were queued it should return -EAGAIN. We then try the request again and again, resulting in cpu spinning. Reproducer: 1) open a file on the nfs server '/nfs/foo' (mounted using udp) 2) iptables -A OUTPUT -d <nfs server ip> -j DROP 3) write to /nfs/foo 4) close /nfs/foo 5) iptables -D OUTPUT -d <nfs server ip> -j DROP The softlockup occurs in step 4 above. The previous patch, allows xs_sendpages() to return both a sent count and any error values that may have occurred. Thus, if we get an -EPERM, return that to the higher level code. With this patch in place we can successfully abort the above sequence and avoid the softlockup. I also tried the above test case on an nfs mount on tcp and although the system does not softlockup, I still ended up with the 'hung_task' firing after 120 seconds, due to the i/o being stuck. The tcp case appears a bit harder to fix, since -EPERM appears to get ignored much lower down in the stack and does not propogate up to xs_sendpages(). This case is not quite as insidious as the softlockup and it is not addressed here. Reported-by: Yigong Lou <ylou@akamai.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24rpc: return sent and err from xs_sendpages()Jason Baron
If an error is returned after the first bits of a packet have already been successfully queued, xs_sendpages() will return a positive 'int' value indicating success. Callers seem to treat this as -EAGAIN. However, there are cases where its not a question of waiting for the write queue to drain. For example, when there is an iptables rule dropping packets to the destination, the lower level code can return -EPERM only after parts of the packet have been successfully queued. In this case, we can end up continuously retrying resulting in a kernel softlockup. This patch is intended to make no changes in behavior but is in preparation for subsequent patches that can make decisions based on both on the number of bytes sent by xs_sendpages() and any errors that may have be returned. Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-24lockd: Try to reconnect if statd has movedBenjamin Coddington
If rpc.statd is restarted, upcalls to monitor hosts can fail with ECONNREFUSED. In that case force a lookup of statd's new port and retry the upcall. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit (git 2.34.1) at 2025-09-17 00:37:37 +0000