summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-19ARM: pxa: ssp: provide platform_device_id for PXA3xxDaniel Mack
Provide an explicit match string for PXA3xx SSP ports. Without this match string, SSP0/SSP1/SSP2 in PXA3xxx will be consided as PXA27x SSP Port. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2014-09-18regmap: fix NULL pointer dereference in regmap_get_val_endianPankaj Dubey
Recents commits for getting reg endianness causing NULL pointer dereference if dev is passed NULL in regmap_init_mmio. This patch fixes this issue, and allows to parse reg endianness only if dev and dev->of_node exist. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-18Merge tag 'sound-3.17-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All small fixes in random various drivers, mostly for ASoC at this time, which look reasonable for a high rc number" * tag 'sound-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: rockchip-i2s: dt: swap tx and rx channed request number in example ASoC: rockchip-i2s: fix registers' property of rockchip i2s controller ASoC: rockchip-i2s: fix master mode set bit error ASoC: cs4265: Fix register address to set the proper data type. ALSA: hda - Fix invalid pin powermap without jack detection ASoC: soc-pcm: fix dpcm_path_get error handling ASoC: samsung-i2s: Check secondary DAI exists before referencing ASoC: Update email id of the author ASoC: dwc: Update email id of the author ASoC: davinci-mcasp: Correct rx format unit configuration ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk
2014-09-18Fix unbalanced mutex in dma_pool_create().Krzysztof Hałasa
dma_pool_create() needs to unlock the mutex in error case. The bug was introduced in the 3.16 by commit cc6b664aa26d ("mm/dmapool.c: remove redundant NULL check for dev in dma_pool_create()")/ Signed-off-by: Krzysztof Hałasa <khc@piap.pl> Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-19ARM: pxa: dts: fix ohci controller compatible stringDaniel Mack
The vendor prefix was renamed from "mrvl" to "marvell". Follow this change in the dts file. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2014-09-19ARM: pxa: dts: fix mmc controller compatible stringDaniel Mack
The vendor prefix was renamed from "mrvl" to "marvell". Follow this change in the dts file. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2014-09-18Merge tag 'regulator-v3.17-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Fix some leaked OF node references in regulator drivers that have been left over following a fix on a fix to the reference counting" * tag 'regulator-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: remove unnecessary of_node_get() to parent
2014-09-18Merge tag 'spi-v3.17-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes for v3.17: - Fix davinci so that GPIO chip selects work with deferred probe of GPIOs (which could happen in production depending on kernel config) plus one incremental stylistic fix to that. - Several fixes for the newly introduced rockchip driver that came up in wider testing of the device. - A couple of small things in the sirf driver, one bug that would stop DMA transfers working and another update to follow the documented procedure in the datasheet. - Fix some memory leaks with devm_kzalloc() being used outside of the device bind path" * tag 'spi-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: davinci: remove empty function davinci_spi_cleanup spi: davinci: request cs_gpio's from probe spi/pl022: Fix error message spi/rockchip: Mark DMA as optional spi/rockchip: Don't warn if SPI is busy but disabled spi/rockchip: Fix the wait_for_idle() timeout spi: sirf: add fifo reset/start for cmd transfer spi: sirf: enable RX_IO_DMA_INT interrupt spi: dw: Don't use devm_kzalloc in master->setup callback spi: fsl: Don't use devm_kzalloc in master->setup callback
2014-09-18NFSv4: Fix another bug in the close/open_downgrade codeTrond Myklebust
James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by: James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...) Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-18NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()Steve Dickson
There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. CC: Stable Tree <stable@vger.kernel.org> Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-18ARM: dts: DRA7: Add PMU nodesLucas Weaver
DRA74x and DRA72x family of processors vary slightly in the number of CPUs. So, add different instances of PMU for each of these processor groups. Further, since the interrupts bypass crossbar and are directly connected to GIC, mark the dts nodes with relevant information. Tested with perf utility. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lucas Weaver <l-weaver@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18arm: mach-omap2: Convert pr_warning to pr_warnJoe Perches
Use the more common pr_warn. Other miscellanea: o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: OMAP: Remove unused pieces of legacy DMA APITony Lindgren
We're moving to the dmaengine API, so let's remove the unused pieces of the omap legacy DMA code to make sure we don't get any new users for these: omap_set_dma_color_mode omap_set_dma_src_index omap_set_dma_dest_index omap_dma_unlink_lch omap_clear_dma omap_dma_running omap_dma_set_prio_lch omap_set_dma_dst_endian_type omap_set_dma_src_endian_type omap_get_dma_index omap_dma_disable_irq omap_request_dma_chain omap_free_dma_chain omap_dma_chain_a_transfer omap_start_dma_chain_transfers omap_stop_dma_chain_transfers omap_get_dma_chain_index omap_get_dma_chain_dst_pos omap_get_dma_chain_src_pos omap_modify_dma_chain_params omap_dma_chain_status Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: OMAP4+: Remove static iotable mappings for SRAMRajendra Nayak
In order to handle errata I688, a page of sram was reserved by doing a static iotable map. Now that we use gen_pool to manage sram, we can completely remove all of these static mappings and use gen_pool_alloc() to get the one page of sram space needed to implement errata I688. omap_bus_sync will be NOP until SRAM initialization happens. Suggested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: OMAP4+: Move SRAM data to DTRajendra Nayak
Use drivers/misc/sram.c driver to manage SRAM on all DT only OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of the existing private plat-omap/sram.c Address and size related data is removed from mach-omap2/sram.c and now passed to drivers/misc/sram.c from DT. Users can hence use general purpose allocator apis instead of OMAP private ones to manage and use SRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: AM335x: Get rid of unused sram init functionRajendra Nayak
Remove the empty am33xx_sram_init() function. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: omap2plus_defconfig: Enable some display featuresTony Lindgren
Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: omap2plus_defconfig: Enable battery and reset driversTony Lindgren
Since many omaps run on battery, we should have the battery drivers enabled. Let's also enable the reset driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: omap2plus_defconfig: Add support for distros with systemdTony Lindgren
Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18cgroup: fix unbalanced lockingZefan Li
cgroup_pidlist_start() holds cgrp->pidlist_mutex and then calls pidlist_array_load(), and cgroup_pidlist_stop() releases the mutex. It is wrong that we release the mutex in the failure path in pidlist_array_load(), because cgroup_pidlist_stop() will be called no matter if cgroup_pidlist_start() returns errno or not. Fixes: 4bac00d16a8760eae7205e41d2c246477d42a210 Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
2014-09-18ARM: at91/dt: at91sam9m10g45ek add rtc nodeErik van Luijk
Add rtc node to both the at91sam9g45 SoC family and the at91sam9m10g45ek board. Signed-off-by: Erik van Luijk <evanluijk@interact.nl> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: dts: cm-t54: setup omap_dwc3Dmitry Lifshitz
Add "extcon" and "vbus-supply" properties of DWC3 node. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: cm-t54: add ADS7846 touchscreen supportDmitry Lifshitz
Add ADS7846 touchscreen support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: cm-t54: add Startek LCD supportDmitry Lifshitz
Add DT support for Startek KD050C LCD 800x480 panel. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: cm-t54: add HDMI/DVI display dataDmitry Lifshitz
Add DSS related pinmux and display data nodes required to support HDMI and DVI video out on CM-T54. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: cm-t54: fix mux mode comment styleDmitry Lifshitz
Follow the comment style of mode0_name.modeX_name for pins which mux mode differs from MUX_MODE0. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: sbc-t54: fix mux mode comment styleDmitry Lifshitz
Follow the comment style of mode0_name.modeX_name for pins which mux mode differs from MUX_MODE0. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: Enable PMIC idle configuration for LDPTony Lindgren
With the IO chain reconfigure fixed, we can now enable the PMIC scripts for LDP. Note that at least on my es3.0 based LDP, the UART seems to be flakey after wake-up events from off-idle and hangs but eventually continues. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: Add support for Ethernet on some N900 macro boardsTony Lindgren
As we have support for this in board-rx51-peripherals.c, let's add it to the .dts files too. Note that the reset GPIO will eventually go to the driver. For now let's just pull it down and skip any further reset in case the bootloader has configured the MAC address so NFSroot works. Also note that after 3430-sdp are using proper GPMC timings we can remove the tests for smsc,lan91c94 in gpmc.c. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: Do not set pulls for I2C linesTony Lindgren
There are external pulls on these lines and enabling the internal pulls can cause issue. This is because the internal pulls are parallel with the external pulls. So let's clear the internal I2C pulls. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTsTony Lindgren
This is no longer needed as the device specific wake-up event can now be specified with interrupts-extended property where the second interrupt is the pinctrl-single register, such as the UART3 RX pin. Note that twl4030_omap3.dtsi needs to set WAKEUPENABLE for off-idle to properly trigger the PMIC scripts. And GPIO pins still need to set WAKEUPENABLE for wake-up events. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: dts: omap3-overo: Fix UART wake-up eventsTony Lindgren
Compared to legacy booting, we don't have wake-up events enabled for device tree based booting. This means that if deeper idle states are enabled, the device won't wake up to UART events and seems like it has hung. Let's fix that by adding the wake-up interrupt. Note that we don't need to set the PIN_OFF_WAKEUPENABLE any longer, that's handled by the wake-up interrupt when the serial driver does request_irq on it. Tested with the following on omap3-overo-summit that has the ES2.1 omap: #!/bin/bash uarts=$(find /sys/class/tty/ttyO*/device/power/ -type d) for uart in $uarts; do echo 3000 > $uart/autosuspend_delay_ms done uarts=$(find /sys/class/tty/ttyO*/power/ -type d) for uart in $uarts; do echo enabled > $uart/wakeup echo auto > $uart/control done echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode # grep -i uart /proc/interrupts 90: 1085 INTC 74 OMAP UART2 338: 5 pinctrl 366 OMAP UART2 # grep ^core_pwrdm /sys/kernel/debug/pm_debug/count core_pwrdm (ON),OFF:1654,RET:131,INA:39,ON:1825... Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: omap2plus_defconfig: Add cpufreq to defconfigTony Lindgren
Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: omap2plus_defconfig: Shrink with savedefconfigTony Lindgren
This saves few lines and makes it easier to make patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: OMAP3: Use manual idle for UARTs because of DMA errataTony Lindgren
In sprz318f.pdf "Usage Note 2.7" says that UARTs cannot acknowledge idle requests in smartidle mode when configured for DMA operations. This prevents L4 from going idle. So let's use manual idle mode instead. Otherwise systems using Sebastian's 8250 patches with DMA will never enter deeper idle states because of the errata above. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18ARM: OMAP2+: Add hwmod flag for HWMOD_RECONFIG_IO_CHAINTony Lindgren
Commit cc824534d4fe ("ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled") fixed issues with hung UART wake-up events by calling _reconfigure_io_chain() when MUSB is connected or disconnected. As pointed out by Paul Walmsley, we may need to also call _reconfigure_io_chain() in other cases, so it should be a separate flag. Let's add HWMOD_RECONFIG_IO_CHAIN as suggested by Paul. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18Bluetooth: Fix setting correct security level when initiating SMPJohan Hedberg
We can only determine the final security level when both pairing request and response have been exchanged. When initiating pairing the starting target security level is set to MEDIUM unless explicitly specified to be HIGH, so that we can still perform pairing even if the remote doesn't have MITM capabilities. However, once we've received the pairing response we should re-consult the remote and local IO capabilities and upgrade the target security level if necessary. Without this patch the resulting Long Term Key will occasionally be reported to be unauthenticated when it in reality is an authenticated one. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-09-18ARM: at91/dt: sama5d3: use new pinctrl compatible stringMarek Roszko
This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was added with the drive strength options patch. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nicolas.ferre@atmel.com: second compatible string kept as at91sam9x5] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: sama5d3: add the nfc clockAlexandre Belloni
The atmel_nand driver is now able to handle the nfc clock, add it to sama5d3. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: declare sckc node on at91sam9g45Boris BREZILLON
Declare the SCKC (Slow Clock Configuration) block and its clks. Make use of the clk32k clk instead of slow_osc where appropriate. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: Fix typo regarding can0_clkDavid Dueck
Otherwise the clock for can0 will never get enabled. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: at91sam9g20: switch ssc compatible stringBo Shen
As the SSC integrate in at91sam9g20 support frame sync length extension, so switch compatible string to support this feature. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: at91sam9rl: switch ssc compatible stringBo Shen
As the SSC integrate in at91sam9rl support frame sync length extension, so switch compatible string to support this feature. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18Revert "Btrfs: device_list_add() should not update list when mounted"Chris Mason
This reverts commit b96de000bc8bc9688b3a2abea4332bd57648a49f. This commit is triggering failures to mount by subvolume id in some configurations. The main problem is how many different ways this scanning function is used, both for scanning while mounted and unmounted. A proper cleanup is too big for late rcs. For now, just revert the commit and we'll put a better fix into a later merge window. Signed-off-by: Chris Mason <clm@fb.com>
2014-09-18Revert "usb: gadget: composite: dequeue cdev->req before free its buffer"Felipe Balbi
This reverts commit be0a8887bb931af0e21531da20c41533effbb0d6. The original commit f2267089ea17fa97b796b1b4247e3f8957655df3 (usb: gadget: composite: dequeue cdev->req before free it in composite_dev_cleanup) ended up being reverted because it caused more issues then fixed. We will also revert this counter part commit so we start clean to properly add that idea back. Cc: Li Jun <b47624@freescale.com> Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-09-18ARM: at91: sama5d3xek: reserve dma channel for audioBo Shen
We set the DMA configuration on USARTs in the SoC DT in (ARM: at91: sama5d3: add usart dma configurations). As the audio must work with DMA channels, we reserve some dma channels for audio, or else audio won't work. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: move to the sama5d3xmb.dtsi to cover all board variants] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18crypto: qat - Enable all 32 IRQsTadeusz Struk
Enable interrupts from all 32 bundles. Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-18drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chvVille Syrjälä
The limited color range knob is in the port registers on g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code to read out the hardware state into pipe config. On vlv/chv the DP port limited color range knob is in PIPECONF for which we already have readout code. Cc: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-09-18ixgbe: remove IXGBE_FLAG_MSI(X)_CAPABLE flagsJacob Keller
They were not used, and we don't need them, so we shouldn't bother with keeping values in the flags field that could be misleading. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: add warnings for other disabled features without MSI-X supportJacob Keller
When we can't get MSI-X vectors, we disable a few features which require MSI-X vectors. Print warnings just like we do when disabling DCB. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 16:55:33 +0000