summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-01kbuild: add machine size to CHECKFLAGSLuc Van Oostenryck
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-31cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argumentRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdrRonnie Sahlberg
smb2_hdr is just a wrapper around smb2_sync_hdr at this stage and smb2_hdr is going away. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: remove struct smb2_oplock_break_rspRonnie Sahlberg
The two structures smb2_oplock_breaq_req/rsp are now basically identical. Replace this with a single definition of a smb2_oplock_break structure. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: remove rfc1002 header from all SMB2 response structuresRonnie Sahlberg
Separate out all the 4 byte rfc1002 headers so that they are no longer part of the SMB2 header structures to prepare for future work to add compounding support. Update the smb3 transform header processing that we no longer have a rfc1002 header at the start of this structure. Update smb2_readv_callback to accommodate that the first iovector in the response is no the smb2 header and no longer a rfc1002 header. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31smb3: on reconnect set PreviousSessionId fieldSteve French
The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4dc3a4f66f020cfb9286225ecd228ab61d ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <stable@vger.kernel.org> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-31smb3: Add posix create context for smb3.11 posix mountsSteve French
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-31compiler.h: enable builtin overflow checkers and add fallback codeRasmus Villemoes
This adds wrappers for the __builtin overflow checkers present in gcc 5.1+ as well as fallback implementations for earlier compilers. It's not that easy to implement the fully generic __builtin_X_overflow(T1 a, T2 b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are the same. We obviously don't want the wrappers to have different semantics depending on $GCC_VERSION, so we also insist on that even when using the builtins. There are a few problems with the 'a+b < a' idiom for checking for overflow: For signed types, it relies on undefined behaviour and is not actually complete (it doesn't check underflow; e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it is wrong for all types (signed and unsigned) narrower than int. Similarly, when a and b does not have the same type, there are subtle cases like u32 a; if (a + sizeof(foo) < a) return -EOVERFLOW; a += sizeof(foo); where the test is always false on 64 bit platforms. Add to that that it is not always possible to determine the types involved at a glance. The new overflow.h is somewhat bulky, but that's mostly a result of trying to be type-generic, complete (e.g. catching not only overflow but also signed underflow) and not relying on undefined behaviour. Linus is of course right [1] that for unsigned subtraction a-b, the right way to check for overflow (underflow) is "b > a" and not "__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases covered here, and included mostly for completeness. So is it worth it? I think it is, if nothing else for the documentation value of seeing if (check_add_overflow(a, b, &d)) return -EGOAWAY; do_stuff_with(d); instead of the open-coded (and possibly wrong and/or incomplete and/or UBsan-tickling) if (a+b < a) return -EGOAWAY; do_stuff_with(a+b); While gcc does recognize the 'a+b < a' idiom for testing unsigned add overflow, it doesn't do nearly as good for unsigned multiplication (there's also no single well-established idiom). So using check_mul_overflow in kcalloc and friends may also make gcc generate slightly better code. [1] https://lkml.org/lkml/2015/11/2/658 Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31ARM: spectre-v1: fix syscall entryRussell King
Prevent speculation at the syscall table decoding by clamping the index used to zero on invalid system call numbers, and using the csdb speculative barrier. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31ARM: spectre-v1: add array_index_mask_nospec() implementationRussell King
Add an implementation of the array_index_mask_nospec() function for mitigating Spectre variant 1 throughout the kernel. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31ARM: spectre-v1: add speculation barrier (csdb) macrosRussell King
Add assembly and C macros for the new CSDB instruction. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com>
2018-05-31Merge tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "Clear out i_mapping error state when we're reinitializing inodes. This last minute fix prevents writeback error state from persisting past the end of the in-core inode lifecycle and causing EIO errors to be reported to userspace when no error has occurred. This fix for the behavioral regression has been soaking in for-next for a while, but various fs developers persuaded me to try to get it upstream for 4.17 because the patch that broke things was introduced in 4.17-rc4" * tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs: clear writeback errors in inode_init_always
2018-05-31rtc: test: remove irq sysfs fileAlexandre Belloni
Now that alarms are emulated, remove the irq sysfs file that could be used to send alarms. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: emulate alarms using timersAlexandre Belloni
Use timers to emulate alarms. Note that multiple alarms may happen if they are set more than 15 days after the current RTC time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: store time as an offset to system timeAlexandre Belloni
Store the time as an offset to system time. As the offset is in second, it is currently always synced with system time. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: allow registering many devicesAlexandre Belloni
Use a loop to register RTC devices Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: test: remove useless proc infoAlexandre Belloni
The rtc proc callback is useless for two reasosn: - the test RTC is often not the first RTC so it will never be used - all the info is available in the name file of the RTC sys folder Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: ds1685: Add rangeAlexandre Belloni
Useful range is 2000-2099 because leap year fails on centuries. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: ds1685: fix possible race conditionAlexandre Belloni
The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler. Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: sprd: Add new RTC power down check methodBaolin Wang
We should use the new method to check if RTC was powered down, which is more solid. Since we have introduced power control and power status registers, and we just check if the power status is the default value (0x96), if yes that means the RTC has been powered down. Meanwhile We can set the power control register to be one valid value to change the power status to indicate RTC device is valid now. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: sun6i: Fix bit_idx value for clk_register_gateMichael Trimarchi
clk-gate core will take bit_idx through clk_register_gate and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx) which is wrong and eventually external gate clock is not enabling. This patch fixed by passing bit index and the original change introduced from below commit. "rtc: sun6i: Add support for the external oscillator gate" (sha1: 17ecd246414b3a0fe0cb248c86977a8bda465b7b) Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Fixes: 17ecd246414b ("rtc: sun6i: Add support for the external oscillator gate") Cc: stable@vger.kernel.org Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31rtc: jz4740: Fix a typo in KconfigMathieu Malaterre
Fix typo introduced for RTC_DRV_JZ4740 in commit 586655d278ba ("rtc: jz4740: make the driver buildable as a module again"). Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-31net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter
The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/ncsi: Fix array size in dumpit handlerSamuel Mendoza-Jonas
With CONFIG_CC_STACKPROTECTOR enabled the kernel panics as below when parsing a NCSI_CMD_PKG_INFO command: [ 150.149711] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08 [ 150.149711] [ 150.159919] CPU: 0 PID: 1301 Comm: ncsi-netlink Not tainted 4.13.16-468cbec6d2c91239332cb91b1f0a73aafcb6f0c6 #1 [ 150.170004] Hardware name: Generic DT based system [ 150.174852] [<80109930>] (unwind_backtrace) from [<80106bc4>] (show_stack+0x20/0x24) [ 150.182641] [<80106bc4>] (show_stack) from [<805d36e4>] (dump_stack+0x20/0x28) [ 150.189888] [<805d36e4>] (dump_stack) from [<801163ac>] (panic+0xdc/0x278) [ 150.196780] [<801163ac>] (panic) from [<801162cc>] (__stack_chk_fail+0x20/0x24) [ 150.204111] [<801162cc>] (__stack_chk_fail) from [<805cff08>] (ncsi_pkg_info_all_nl+0x244/0x258) [ 150.212912] [<805cff08>] (ncsi_pkg_info_all_nl) from [<804f939c>] (genl_lock_dumpit+0x3c/0x54) [ 150.221535] [<804f939c>] (genl_lock_dumpit) from [<804f873c>] (netlink_dump+0xf8/0x284) [ 150.229550] [<804f873c>] (netlink_dump) from [<804f8d44>] (__netlink_dump_start+0x124/0x17c) [ 150.237992] [<804f8d44>] (__netlink_dump_start) from [<804f9880>] (genl_rcv_msg+0x1c8/0x3d4) [ 150.246440] [<804f9880>] (genl_rcv_msg) from [<804f9174>] (netlink_rcv_skb+0xd8/0x134) [ 150.254361] [<804f9174>] (netlink_rcv_skb) from [<804f96a4>] (genl_rcv+0x30/0x44) [ 150.261850] [<804f96a4>] (genl_rcv) from [<804f7790>] (netlink_unicast+0x198/0x234) [ 150.269511] [<804f7790>] (netlink_unicast) from [<804f7ffc>] (netlink_sendmsg+0x368/0x3b0) [ 150.277783] [<804f7ffc>] (netlink_sendmsg) from [<804abea4>] (sock_sendmsg+0x24/0x34) [ 150.285625] [<804abea4>] (sock_sendmsg) from [<804ac1dc>] (___sys_sendmsg+0x244/0x260) [ 150.293556] [<804ac1dc>] (___sys_sendmsg) from [<804ad98c>] (__sys_sendmsg+0x5c/0x9c) [ 150.301400] [<804ad98c>] (__sys_sendmsg) from [<804ad9e4>] (SyS_sendmsg+0x18/0x1c) [ 150.308984] [<804ad9e4>] (SyS_sendmsg) from [<80102640>] (ret_fast_syscall+0x0/0x3c) [ 150.316743] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08 This turns out to be because the attrs array in ncsi_pkg_info_all_nl() is initialised to a length of NCSI_ATTR_MAX which is the maximum attribute number, not the number of attributes. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: dsa: mv88e6xxx: Be explicit about DT or pdataAndrew Lunn
Make it explicit that either device tree is used or platform data. If neither is available, abort the probe. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 877b7cb0b6f2 ("net: dsa: mv88e6xxx: Add minimal platform_data support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ti: cpsw: include gpio/consumer.hArnd Bergmann
On platforms that don't always enable CONFIG_GPIOLIB, we run into a build failure: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe': drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration] mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); Since we cannot rely on this to be visible from gpio.h, we have to include gpio/consumer.h directly. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge branch 'mlx5-new-device-events'David S. Miller
Saeed Mahameed says: ==================== Mellanox, mlx5 new device events The following series is for mlx5-next tree [1], it adds the support of two new device events, from Ilan Tayari: 1. High temperature warnings. 2. FPGA QP error event. In case of no objection this series will be applied to mlx5-next tree and will be sent later as a pull request to both rdma and net trees. [1] https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git/log/?h=mlx5-next v1->v2: - improve commit message of the FPGA QP error event patch. ==================== Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/mlx5: Add FPGA QP error eventIlan Tayari
The FPGA queue pair (QP) event fires whenever a QP on the FPGA transitions to the error state. At this stage, this event is unrecoverable, it may become recoverable in the future. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/mlx5: Add temperature warning event to logIlan Tayari
Temperature warning event is sent by FW to indicate high temperature as detected by one of the sensors on the board. Add handling of this event by writing the numbers of the alert sensors to the kernel log. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'wireless-drivers-for-davem-2018-05-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 Two last minute fixes, hopefully they make it to 4.17 still. rt2x00 * revert a fix which caused even more problems iwlwifi * fix a crash when there are 16 or more logical CPUs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31rtnetlink: Add more well known protocol valuesDonald Sharp
FRRouting installs routes into the kernel associated with the originating protocol. Add these values to the well known values in rtnetlink.h. Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31cxgb4: Add FORCE_PAUSE bit to 32 bit port capsGanesh Goudar
Add FORCE_PAUSE bit to force local pause settings instead of using auto negotiated values. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31cls_flower: Fix incorrect idr release when failing to modify rulePaul Blakey
When we fail to modify a rule, we incorrectly release the idr handle of the unmodified old rule. Fix that by checking if we need to release it. Fixes: fe2502e49b58 ("net_sched: remove cls_flower idr on failure") Reported-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/sonic: Use dma_mapping_error()Finn Thain
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge branch 'bridge-vlan-notify'David S. Miller
Petr Machata says: ==================== net: bridge: Notify about bridge VLANs In commit 946a11e7408e ("mlxsw: spectrum_span: Allow bridge for gretap mirror"), mlxsw got support for offloading mirror-to-gretap such that the underlay packet path involves a bridge. In that case, the offload is also influenced by PVID setting of said bridge. However, changes to VLAN configuration of the bridge itself do not generate switchdev notifications, so there's no mechanism to prod mlxsw to update the offload when these settings change. In this patchset, the problem is resolved by distributing the switchdev notification SWITCHDEV_OBJ_ID_PORT_VLAN also for configuration changes on bridge VLANs. Since stacked devices distribute the notification to lower devices, such event eventually reaches the driver, which can determine whether it's a bridge or port VLAN by inspecting orig_dev. To keep things consistent, the newly-distributed notifications observe the same protocol as the existing ones: dual prepare/commit, with -EOPNOTSUPP indicating lack of support, even though there's currently nothing to prepare for and nothing to support. Correspondingly, all switchdev drivers have been updated to return -EOPNOTSUPP for bridge VLAN notifications. In patches #1 and #2, the code base is changed to support the following additions: functions br_switchdev_port_vlan_add() and br_switchdev_port_vlan_del() are introduced to simplify sending notifications; and br_vlan_add_existing() is introduced to later make it simpler to add error-handling code for the case of configuring a preexisting VLAN on bridge CPU port. In patches #3-#6, respectively for mlxsw, rocker, DSA and DPAA2 ethsw, the new notifications (which are not enabled yet) are ignored to maintain the current behavior. In patch #7, the notification is actually enabled. In patch #8, mlxsw is changed to update offloads of mirror-to-gre also for bridge-related notifications. Changes from v3 to v4: - In patch #1, separate variable declarations from program logic. - Add patch #2. - In patch #7, add error handling around a newly-introduced call to br_switchdev_port_vlan_add(). - Rephrase commit messages of patches #3-#6 to explain motivation for the change. Changes from v2 to v3: - Add a fallback definition for br_switchdev_port_obj_add() and br_switchdev_port_obj_del() when !CONFIG_NET_SWITCHDEV. Changes from v1 to v2: - Rename br_switchdev_port_obj_add() and br_switchdev_port_obj_del() to br_switchdev_port_vlan_add() and br_switchdev_port_vlan_del(), and move from br_vlan.c to br_switchdev.c. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Schedule respin during trans preparePetr Machata
Since there's no special support for the bridge events, the driver returns -EOPNOTSUPP, and thus the commit never happens. Therefore schedule respin during the prepare stage: there's no real difference one way or another. This fixes the problem that mirror-to-gretap offload wouldn't adapt to changes in bridge vlan configuration right away and another notification would have to arrive for mlxsw to catch up. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Notify about bridge VLANsPetr Machata
A driver might need to react to changes in settings of brentry VLANs. Therefore send switchdev port notifications for these as well. Reuse SWITCHDEV_OBJ_ID_PORT_VLAN for this purpose. Listeners should use netif_is_bridge_master() on orig_dev to determine whether the notification is about a bridge port or a bridge. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31staging: fsl-dpaa2: ethsw: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31dsa: port: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31rocker: rocker_main: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Extract br_vlan_add_existing()Petr Machata
Extract the code that deals with adding a preexisting VLAN to bridge CPU port to a separate function. A follow-up patch introduces a need to roll back operations in this block due to an error, and this split will make the error-handling code clearer. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: bridge: Extract boilerplate around switchdev_port_obj_*()Petr Machata
A call to switchdev_port_obj_add() or switchdev_port_obj_del() involves initializing a struct switchdev_obj_port_vlan, a piece of code that repeats on each call site almost verbatim. While in the current codebase there is just one duplicated add call, the follow-up patches add more of both add and del calls. Thus to remove the duplication, extract the repetition into named functions and reuse. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31drm/amd/display: Update color props when modeset is requiredLeo (Sunpeng) Li
This fixes issues where color management properties don't persist over DPMS on/off, or when the CRTC is moved across connectors. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31drm/amd/display: Make atomic-check validate underscan changesDavid Francis
When the underscan state was changed, atomic-check was triggering a validation but passing the old underscan values. This change adds a somewhat hacky check in dm_update_crtcs_state that will update the stream if old and newunderscan values are different. This was causing 4k on Fiji to allow underscan when it wasn't permitted. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-31qed*: Add link change count value to ethtool statistics display.Sudarsana Reddy Kalluru
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31RDMA/qedr: fix spelling mistake: "adrresses" -> "addresses"Colin Ian King
Trivial fix to spelling mistake in DP_ERR error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-31Merge tag 'mlx5e-updates-2018-05-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-29 This series includes mlx5 FPGA and mlx5e netdevice updates: 1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari. 2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik. 3) Two FPGA dma related minor fixes, from Ilya Lesokhin. 4) Use the right table to report offloaded TC rules, from Or Gerlitz. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31ALSA: oxygen: use match_string() helperYisheng Xie
match_string() returns the index of an array for a matching string, which can be used instead of open coded variant. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-31net: remove bypassed check in sch_direct_xmit()Song Liu
Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit() is being bypassed. This is because "ret" from sch_direct_xmit() will be either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0 will reach the condition: if (ret && netif_xmit_frozen_or_stopped(txq)) return false; This patch cleans up the code by removing the whole condition. For more discussion about this, please refer to https://marc.info/?t=152727195700008 Signed-off-by: Song Liu <songliubraving@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 03:39:46 +0000