summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-08qlcnic: update driver version 5.0.11Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix promiscous mode for VFRajesh Borundia
o Allow promiscous mode setting for VF's depending upon the configuration. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: fix board descriptionSritej Velaga
Remove "Flex-10" from board description. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: remove private LRO flagAmit Kumar Salecha
LRO was not getting enable after interface down/up. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: support quiescent modeAmit Kumar Salecha
Put device in quiescent mode during internal loopback test. Before running test, set state to NEED_QUISCENT. After getting ack from all function, change state to QUISCENT and perform test. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: driver private workqueueAmit Kumar Salecha
Currently fw recovery usage global workqueue. As same workqueue used by kernel for ethtool and etc., supporting quiescent mode is not possible, without driver private workqueue. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ipw2x00/ipw2200.c
2010-10-08ipv4: Remove leftover rcu_read_unlock calls from __mkroute_output()Dimitris Michailidis
Commit "fib: RCU conversion of fib_lookup()" removed rcu_read_lock() from __mkroute_output but left a couple of calls to rcu_read_unlock() in there. This causes lockdep to complain that the rcu_read_unlock() call in __ip_route_output_key causes a lock inbalance and quickly crashes the kernel. The below fixes this for me. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08net: clear heap allocation for ETHTOOL_GRXCLSRLALLKees Cook
Calling ETHTOOL_GRXCLSRLALL with a large rule_cnt will allocate kernel heap without clearing it. For the one driver (niu) that implements it, it will leave the unused portion of heap unchanged and copy the full contents back to userspace. Signed-off-by: Kees Cook <kees.cook@canonical.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-08sfc: Don't try to set filters with search depths we know won't workBen Hutchings
The filter engine will time-out and ignore filters beyond 200-something hops. We also need to avoid infinite loops in efx_filter_search() when the table is full. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08net: Update kernel-doc for netif_set_real_num_rx_queues()Ben Hutchings
Synchronise the comment with the preceding implementation change. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08isdn: strcpy() => strlcpy()Dan Carpenter
setup.phone and setup.eazmsn are 32 character buffers. rcvmsg.msg_data.byte_array is a 48 character buffer. sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn is 50 chars. The rcvmsg struct comes from the memcpy_fromio() in receivemessage(). I guess that means it's data off the wire. I'm not very familiar with this code but I don't see any reason to assume these strings are NULL terminated. Also it's weird that "dn" in a 50 character buffer but we only seem to use 32 characters. In drivers/isdn/sc/scioc.h, "dn" is only a 49 character buffer. So potentially there is still an issue there. The important thing for now is to prevent the memory corruption. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08wl1271: sdio: add suspend/resume supportOhad Ben-Cohen
Add required suspend/resume support to prevent the SDIO core from removing our card completely during system suspend. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-08wl1271: sdio: enable runtime PMOhad Ben-Cohen
Enable runtime PM for the wl1271 SDIO device. We request power whenever the WLAN interface is brought up, and release it after the WLAN interface is taken down. As a result, power is released immediately after probe returns, since at that point power has not been explicitly requested yet (i.e. the WLAN interface is still down). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-07iwlagn: add temperature offset calib for 6000g2Shanyu Zhao
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: fix default calibration table sizeShanyu Zhao
iwlagn driver uses the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as the chain noise reset calibration index and IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE+1 as the chain noise gain calibration index, if not specified by the TLV value in the new firmware format. However, this is broken if we need to add more calibrations like the temperature offset calibration because we increased IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE by 1. To fix this issue, define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE and use it as the calibration index instead. We still keep the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as a sanity check for the TLV value given by ucode. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: no version check for experimental uCodeWey-Yi Guy
For experimental uCode, it should work with the driver if driver has experimental uCode support option enabled; remove the API version checking. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: fix dual-mode scanningJohannes Berg
The recent scanning code shuffle accidentally moved the SCAN_HW bit setting _after_ the PAN parameters are modified, which means that they don't take the scan into account -- fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove iwl_check_bitsJohannes Berg
The function is used exactly once, and the caller doesn't even need the special check, it can be simplified to a simple bit check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: clean up declarationsJohannes Berg
A number of declarations in iwl-core.h should be in agn specific files, and also rename the iwl-calib.h file to iwl-agn-calib.h to better reflect that it belongs to agn. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove apm_ops.stopJohannes Berg
Since all devices share the same operation here, there's no need to call it indirectly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_pwr_src operationJohannes Berg
The set_pwr_src operation is only ever used from within the same sub-driver that it is declared in, so it can just be called directly instead of being an operation. Also, it is never called to set the power source to V_aux, so change the two functions accordingly (but keep the V_aux code for documentation purposes in a comment). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_ct_kill operationJohannes Berg
This operation is only ever called from set_hw_params, which is also already based on the config/ops, so that there's no need to have a separate set_ct_kill op and we can just call the right ct_threshold function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_dump_fh to agnJohannes Berg
The iwl_dump_fh function is only used by the agn module, so it can be there instead of being exported by the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_dump_csr to agnJohannes Berg
The iwl_dump_csr function is only used within the agn module, so it can be moved there instead of being exported by the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_toggle_rx_ant to agnJohannes Berg
The iwl_toggle_tx_ant function is only used by agn code, so it can be moved into the agn module instead of being exported from the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove agn rates info thereJohannes Berg
Code and data related to agn bitrates can be part of the agn module rather than being in the core module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove spurious exportsJohannes Berg
A number of exports, especially related to thermal throttling, are unnecessary because the code lives in the same module that it is used in, so remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move tx fail code to agnJohannes Berg
The code to print out TX failure reasons is AGN specific, so it can be in the AGN module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move agn specific station code thereJohannes Berg
By duplicating a little bit of code between 3945 and agn, we can move a lot of code into an agn specific station management file and thus reduce the amount of code in core that is dead to 3945. before: text data bss dec hex filename 212886 3872 96 216854 34f16 iwlcore.ko 620542 10448 304 631294 9a1fe iwlagn.ko 314013 3264 196 317473 4d821 iwl3945.ko after: text data bss dec hex filename 202857 3872 92 206821 327e5 iwlcore.ko 629102 10448 308 639858 9c372 iwlagn.ko 314240 3264 196 317700 4d904 iwl3945.ko delta: -10029 iwlcore.ko 8560 iwlagn.ko 227 iwl3945.ko so it's a net win even if you have both loaded, likely because a lot of EXPORT_SYMBOLs go away. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove verify_signature eeprom operationJohannes Berg
All drivers share the same implementation, so there's no need to call this via a function pointer nor to export it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: rename iwl_mac_beacon_updateJohannes Berg
Rename iwl_mac_beacon_update to iwlcore_beacon_update and make the calling convention a bit different. The old name with _mac_ indicated that it was a mac80211 callback, but that's no longer true. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move chain settings to agnJohannes Berg
The core module doesn't need to carry around the code for chain settings that is used for HT drivers (agn) only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwl3945: use iwl3945_commit_rxonJohannes Berg
There's no need to go via the indirect function call from within the 3945 subdriver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: introduce post_scan hookJohannes Berg
The different drivers need to do different things after a scan, so create a post_scan hook to allow them to do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: rename iwl_commit_rxonJohannes Berg
iwl_commit_rxon really should be named iwlagn_commit_rxon, so rename it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07ath9k_hw: Fix hw reset failure with HTC driverRajkumar Manoharan
The following commit removed DISABLE_REGWRITE_BUFFER ops. The unnecessary REGWRITE_BUFFER_FLUSH was not removed properly which is causing failure on hw reset. Author: Felix Fietkau <nbd@openwrt.org> Date: Tue Oct 5 12:03:42 2010 +0200 ath9k_hw: clean up register write buffering Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07cfg80211: constify WDS addressJohannes Berg
There's no need for the WDS peer address to not be const, so make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07nl80211: use new genl helpers for WDSJohannes Berg
Bill Jordan's patch to allow setting the WDS peer crossed with my patch removing all the boilerplate code in nl80211, and consequently he didn't make use of it yet. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07mac80211: fix sw scan lockingJohannes Berg
The recent scan overhaul broke locking because now we can jump to code that attempts to unlock, while we don't have the mutex held. Fix this by holding the mutex around all the relevant code. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07wl1271: Support FEM autodetectionJuuso Oikarinen
In the NVS/INI-parameters for the driver/firmware there is the FEM (front end module) selection option, which may configure the hardware FEM via autodetection or manual selection. So far, there has been support for manual selection only. Add support for FEM autodetection. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-10-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-07Revert "mac80211: use netif_receive_skb in ieee80211_tx_status callpath"John W. Linville
This reverts commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe. It turns-out that not all drivers are calling ieee80211_tx_status from a compatible context. Revert this for now and try again later... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Revert "rtl8180: use NAPI for bottom-half processing"John W. Linville
This reverts commit 030725d2c7c1fafec7ede618647bf30ed79601f0. This commit relies on commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe ("mac80211: use netif_receive_skb in ieee80211_tx_status callpath") Unfortunately not all drivers are calling ieee80211_tx_status from a compatible context, so that commit needs to be reverted in 2.6.36. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2010-10-06ixgbe: Use affinity_hint when Flow Director is enabledPeter Waskiewicz
Use the new infrastructure to balance interrupts for flow alignment when ATR or Flow Director are enabled. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-28 23:08:09 +0000