summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-13ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: apalis: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: nyan: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: nexus7: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: paz00: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: ouya: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor and enable it in pinmux, for completeness. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: Add SoC thermal sensor to Tegra30 device-treesDmitry Osipenko
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU temperature reporting and thermal throttling is available on all Tegra30 devices universally. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-12Merge tag 'omap-for-v5.15/dt-am3-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Changes for am3 cpsw and SanCloud for v5.15 A series of changes to update am3 to use cpsw switch driver and few updates to earlier SanCloud changes. The plan was to send the cpsw switch driver changes earlier but looks like I never tagged the mail thread in my inbox to apply for v5.15. * tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs ARM: dts: am335x-bone: switch to new cpsw switch drv ARM: dts: am33xx: update ethernet aliases ARM: dts: am335x-sl50: switch to new cpsw switch drv ARM: dts: am335x-shc: switch to new cpsw switch drv ARM: dts: am335x-phycore: switch to new cpsw switch drv ARM: dts: am335x-pepper: switch to new cpsw switch drv ARM: dts: am335x-pdu001: switch to new cpsw switch drv ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv ARM: dts: am335x-myirtech: switch to new cpsw switch drv ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv ARM: dts: am335x-lxm: switch to new cpsw switch drv ARM: dts: am335x-igep0033: switch to new cpsw switch drv ARM: dts: am335x-cm-t335: switch to new cpsw switch drv ARM: dts: am335x-chiliboard: switch to new cpsw switch drv ARM: dts: am335x-nano: switch to new cpsw switch drv ARM: dts: am335x-baltos: switch to new cpsw switch drv Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'samsung-dt64-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.15 1. Add CPU topology and cache information to Exynos DTSI files. 2. Correct GIC CPU interfaces address range on Exynos7. * tag 'samsung-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 arm64: dts: exynos: add CPU topology to Exynos5433 arm64: dts: exynos: Add cpu cache information to Exynos5433 arm64: dts: exynos: Add cpu cache information to Exynos7 Link: https://lore.kernel.org/r/20210811085128.30103-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'samsung-dt-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.15 Add CPU topology to all Exynos DTSI files. * tag 'samsung-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: add CPU topology to Exynos5422 ARM: dts: exynos: add CPU topology to Exynos5420 ARM: dts: exynos: add CPU topology to Exynos5260 ARM: dts: exynos: add CPU topology to Exynos5250 ARM: dts: exynos: add CPU topology to Exynos4412 ARM: dts: exynos: add CPU topology to Exynos4210 ARM: dts: exynos: add CPU topology to Exynos3250 Link: https://lore.kernel.org/r/20210811085128.30103-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'amlogic-arm-dt-for-v5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM DT changes for v5.15: - meson8: use a default higher default GPU clock to solve probe failure - meson: add AIU audio controller and codec for ec100 - meson8b: fix pwm regulator supply property name * tag 'amlogic-arm-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties ARM: dts: meson8b: ec100: wire up the RT5640 audio codec ARM: dts: meson: Add the AIU audio controller ARM: dts: meson8: Use a higher default GPU clock frequency Link: https://lore.kernel.org/r/87519792-c9e7-76a6-5db5-0e955286b564@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'amlogic-arm64-dt-for-v5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changes for v5.15: - nanoki-k2: enable bluetooth - khadas vim & vim2: improve wifi * tag 'amlogic-arm64-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: improve gxm-khadas-vim2 wifi arm64: dts: meson: improve gxl-s905x-khadas-vim wifi arm64: dts: meson-gxbb: nanopi-k2: Enable Bluetooth Link: https://lore.kernel.org/r/032895d9-62b6-6c9e-b04b-9c3d316f27ec@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'ti-k3-dt-for-v5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt Devicetree changes for TI K3 platforms for v5.15 merge window: * New features: - AM64 adds pwm and ecap capability * tag 'ti-k3-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: arm64: dts: ti: k3-am642-sk: Add pwm nodes arm64: dts: ti: k3-am642-evm: Add pwm nodes arm64: dts: ti: k3-am64-main: Add ecap pwm nodes arm64: dts: ti: k3-am64-main: Add epwm nodes Link: https://lore.kernel.org/r/20210809130631.pfvntcichsyeekbo@festive Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'v5.14-next-dts64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt MT8173: - Add regulator for MFG_ASYNC power domain - Use alias for MMC to get fixed numbers MT8183: - Use alia for MMC to get fixed numbers - Add optional event number for Global Comman Engine * tag 'v5.14-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: mediatek: Add optional mediatek,gce-events property arm64: dts: mt8183: add mediatek,gce-events in mutex arm64: dts: mediatek: mt8173: Add domain supply for mfg_async arm64: dts: mt8173: elm: Use aliases to mmc nodes arm64: dts: mt8183: kukui: Use aliases to mmc nodes Link: https://lore.kernel.org/r/26c4026a-9f26-d5a3-c30f-439120a4eaa0@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'v5.14-next-dts32' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt Increase trip point on MT7623 * tag 'v5.14-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: increase passive cooling trip Link: https://lore.kernel.org/r/289ded1c-dae7-54ef-6b56-9433bfcaf9de@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'ixp4xx-dts-arm-soc-v5.15-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS file updates for the v5.15 kernel cycle: - Fix up some (non-urgent) IRQ flags for the PCI buses. - Add the second UART to the generic ixp4xx.dtsi - Make use of the new expansion bus driver in all device trees with e.g. flash memory on the expansion bus. - Adds the CF card slot to the Gateworks GW2358. - Add new device trees for: - Iomega NAS 100D - D-Link DSM-G600 - Netgear WG302v2 - Arcom Vulcan - Gateworks Avila GW2348 - Intel IXPD425 and siblings - Coyote and IXDPG425 - Linksys WRV54G * tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3 ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425 ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs ARM: dts: ixp4xx: Add CF to GW2358 ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree ARM: dts: ixp4xx: Add Arcom Vulcan device tree ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2 ARM: dts: ixp4xx: Use the expansion bus ARM: dts: ixp4xx: Add second UART ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A ARM: dts: ixp4xx: Move EPBX100 flash to external bus node ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D ARM: dts: ixp4xx: Fix up bad interrupt flags Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'stm32-dt-for-v5.15-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT for v5.15, round 1 Highlights: ---------- -MPU: - ST boards: - Add coporcessor detach mailbox on ED and DKx boards - Fix dtbs_check SAI warnings - DH boards: -Fix some dtbs_check warnings: usb, backlight, hdmi * tag 'stm32-dt-for-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards ARM: dts: stm32: Add coprocessor detach mbox on stm32mp157c-ed1 board ARM: dts: stm32: Add usbphyc_port1 supply on DHCOM SoM ARM: dts: stm32: Add backlight and panel supply on DHCOM SoM ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM Link: https://lore.kernel.org/r/e4f0bea3-4065-38d5-f1b2-007e4094c4a8@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'sti-dt-for-v5.15-round1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/dt Highlights: ----------- - Introduce 4KOpen STiH418-b2264 board - Remove clk_ignore_unused from STi boards DT - Remove clock-output-names and clk_critical properties - Update some clock compatible * tag 'sti-dt-for-v5.15-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2260 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih418-b2199 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2120 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih407-b2120 ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board ARM: dts: sti: add the thermal sensor node within stih418 ARM: dts: sti: disable rng11 on the stih418 platform ARM: dts: sti: add the spinor controller node within stih407-family ARM: dts: sti: update clkgen-fsyn entries in stih418-clock ARM: dts: sti: update clkgen-fsyn entries in stih410-clock ARM: dts: sti: update clkgen-fsyn entries in stih407-clock ARM: dts: sti: update clkgen-pll entries in stih418-clock ARM: dts: sti: update clkgen-pll entries in stih410-clock ARM: dts: sti: update clkgen-pll entries in stih407-clock ARM: dts: sti: update flexgen compatible within stih410-clock ARM: dts: sti: update flexgen compatible within stih407-clock ARM: dts: sti: update flexgen compatible within stih418-clock Link: https://lore.kernel.org/r/1d95209f-9cb4-47a3-2696-7a93df7cdc05@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'omap-for-v5.15/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.15 Devicetree changes for omaps to configure more devices, and add support for new SoC variants and devices: - Add add gpio-line-names for am335x-boneblue - Add support for dra762 abz package - Two patches for McASP support on omap4 - Three patches to add support for am335x-sancloud-bbe-lite - A series of changes to configure PRUSS for am3/4/5 * tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am57xx: Add PRUSS MDIO controller nodes ARM: dts: am57xx: Add PRU-ICSS nodes ARM: dts: am4372: Add PRUSS MDIO controller node ARM: dts: am4372: Add the PRU-ICSS0 DT node ARM: dts: am4372: Add the PRU-ICSS1 DT node ARM: dts: am335x-icev2: Enable PRU-ICSS module ARM: dts: am335x-evmsk: Enable PRU-ICSS module ARM: dts: am335x-evm: Enable PRU-ICSS module ARM: dts: am335x-bone-common: Enable PRU-ICSS node ARM: dts: am33xx-l4: Add PRUSS MDIO controller node ARM: dts: am33xx-l4: Add PRUSS node ARM: dts: am335x-sancloud-bbe-lite: New devicetree ARM: dts: am335x-sancloud-bbe: Extract common code ARM: dts: am335x-boneblack: Extract HDMI config ARM: dts: omap4-l4-abe: Add McASP configuration ARM: dts: omap4-l4-abe: Correct sidle modes for McASP ARM: dts: Add support for dra762 abz package ARM: dts: am335x-boneblue: add gpio-line-names Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12arm64: tegra: Add missing interconnects property for USB on Tegra186Thierry Reding
The device tree node for the XUDC (USB device mode controller) is missing the interconnects property that describes the path to memory for the controller. Add the property so that the things like the DMA mask can be set by the operating system. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-12arm64: tegra: Add NVIDIA Jetson TX2 NX Developer Kit supportThierry Reding
The Jetson TX2 NX Developer Kit is very similar to the Jetson Nano, but uses the more powerful Tegra186 SoC. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-12arm64: tegra: Add PWM nodes on Tegra186Thierry Reding
These PWMs can be used for fan or LED backlight control. Add the device tree nodes for all existing controllers found on Tegra186 SoCs. None of these are enabled by default, which is left for the board DTS files to do when necessary. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-12dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kitThierry Reding
The Jetson TX2 NX Developer Kit is the same form factor as Jetson Nano, but uses the more powerful Tegra186 SoC for added performance. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-12dt-bindings: i2c: renesas,riic: Make interrupt-names requiredGeert Uytterhoeven
Now the I2C device nodes in all DTS files have gained "interrupt-names" properties, the "interrupt-names" property can be made required. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/da8d1973dcd419d8d9c8c662ee614952f3a6969e.1626267422.git.geert+renesas@glider.be
2021-08-12arm64: dts: renesas: r9a07g044: Add I2C interrupt-namesGeert Uytterhoeven
Add "interrupt-names" properties to the I2C device nodes, to make it easier to review the interrupt mappings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/d35ba11bd705e3c728f94ff0414ac6ae1156244f.1626267422.git.geert+renesas@glider.be
2021-08-12ARM: dts: rza: Add I2C interrupt-namesGeert Uytterhoeven
Add "interrupt-names" properties to the I2C device nodes of the RZ/A1H and RZ/A2M DTS files, to make it easier to review the interrupt mappings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/7a073439e37f6672e4809af0a2ee9cd4ac820ec6.1626267422.git.geert+renesas@glider.be
2021-08-12dt-bindings: i2c: renesas,riic: Add interrupt-namesGeert Uytterhoeven
The Renesas RZ/A and RZ/G2L I2C Bus Interface has no less than 8 interrupts. Hence document the "interrupt-names" property, to make it easier to review the interrupt mappings in DTS files. Note that this property cannot be made required yet, as the RIIC nodes in all DTS files lack the property. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a81d0e14e395f297666e8c3a8ce3e292d2606a65.1626267422.git.geert+renesas@glider.be
2021-08-11arm64: tegra194: p2888: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-10arm64: dts: renesas: r9a07g044: Add CANFD nodeLad Prabhakar
Add CANFD node to R9A07G044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210727133022.634-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-10Merge tag 'renesas-r9a07g044-dt-binding-defs-tag2' into HEADGeert Uytterhoeven
Renesas RZ/G2L DT Binding Definitions Update Missing definition for the P0_DIV2 core clock on the Renesas RZ/G2L (R9A07G044) SoC, shared by driver and DT source files.
2021-08-10arm64: dts: renesas: r9a07g044: Add ADC nodeLad Prabhakar
Add ADC node to R9A07G044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210804202118.25745-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-10arm64: dts: renesas: r9a07g044: Add pinctrl nodeLad Prabhakar
Add GPIO/pinctrl node to R9A07G044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210727112328.18809-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-10arm64: dts: meson: add audio playback to vega-s95 dtsiChristian Hewitt
Add initial support limited to HDMI i2s and SPDIF (LPCM). Tested-by: Oleg Ivanov <150balbes@yandex.ru> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210804140258.4666-1-christianshewitt@gmail.com
2021-08-10arm64: dts: meson: add audio playback to nexbox-a1Christian Hewitt
Add initial support limited to HDMI i2s and SPDIF (LPCM). Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210804140029.4445-1-christianshewitt@gmail.com
2021-08-10ARM: dts: am335x-sancloud-bbe: Drop usb wifi commentPaul Barker
The wifi chip on USB port 4 may not be present on all BBE variants. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-10ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refsPaul Barker
pinctrl settings for the USB hub, barometer & accelerometer need to be referenced from the relevant nodes to work. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-09arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7Krzysztof Kozlowski
The GIC-400 CPU interfaces address range is defined as 0x2000-0x3FFF (by ARM). Reported-by: Sam Protsenko <semen.protsenko@linaro.org> Reported-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7") Link: https://lore.kernel.org/r/20210805072110.4730-1-krzysztof.kozlowski@canonical.com
2021-08-09ARM: dts: imx7: add ftm nodes for Flex TimersThomas Perrot
The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the block is the same as LS1021a, then the drivers can be used as-is. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 boardChristoph Niedermaier
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX boardChristoph Niedermaier
Add DT for DH PicoITX unit, which is a bare-bones carrier board for the DHCOM. The board has ethernet port, USB, CAN, LEDs and a custom board-to-board expansion connector. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2Christoph Niedermaier
The DH electronics PDK2 can be populated with SoM with i.MX6S/DL/D/Q variants. Split the SoC-independent parts of the SoM and PDK2 into the imx6qdl-dhcom-*.dtsi and reduce imx6q-dhcom-pdk2.dts to example of adding i.MX6S/DL/D/Q variants of the SoM into a PDK2 carrier board. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6q-dhcom: Cleanup of the devicetreesChristoph Niedermaier
Following cleanups of the devicetrees done, no change in function: - Remove parentheses from the license - Update copyright date - Alphabetical sorting - Add comments - Update pinctrl names - Hex values in lower case - Set 3rd values of fixed regulators gpio property to 0 - Replace interrupt type with a define - Remove superfluous property max-speed from the fec node Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6q-dhcom: Rearrange of iomuxChristoph Niedermaier
Move iomux to the end, no change in function. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrlsChristoph Niedermaier
The function of each SoM pins is defined in the DHCOM standard [1] and subset of them is defined as GPIOs (pins A-W). To ensure the interchange- ability of the DHCOM SoMs, the function of the pins are fixed and cannot be changed. On board level the DHCOM GPIOs can be used associated with different blocks e.g. for interrupt or reset, but the function is always GPIO. If not used, they can be freely used in the user space. Therefore the whole configuration of SoM pins is made in the SoM DT. Defining the DHCOM GPIO pins as a separate pinctrl nodes makes moving a subset of them to an appropriate block pinctrl group easier on board level, since it is not necessary to have a large pinctrl hog group containing unrelated pinmux entries on board level. This also makes it easy to update the SoM DT without having to update all the board DTs too. If necessary it is also possible to change the electrical properties of the DHCOM GPIOs by overwriting the pinctrl on board level. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 boardChristoph Niedermaier
The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3Linus Walleij
This adds a devicetree for the Freecom FSG-3, a combined router and NAS. Cc: Rod Whitby <rod@whitby.id.au> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-09ARM: dts: ixp4xx: Add devicetree for Linksys WRV54GLinus Walleij
This adds a device tree for the Linksys WRV54G also known as Gemtek GTWX5715. Some enhancements have been folded in from the OpenWrt patches. This supports everything in the upstream kernel with placeholders for the out-of-tree multiphy which exist in OpenWrt. Cc: phj@phj.hu Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-19 04:14:56 +0000