summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-13dmaengine: rcar-dmac: unmap slave resource when channel is freedNiklas Söderlund
The slave mapping should be removed together with other channel resources when the channel is freed. If it's not unmapped it will hang around forever after the channel is freed. Fixes: 9f878603dbdb7db3 ("dmaengine: rcar-dmac: add iommu support for slave transfers") Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-12pmem: return EIO on read_pmem() failureStefan Hajnoczi
The read_pmem() function uses memcpy_mcsafe() on x86 where an EFAULT error code indicates a failed read. Block I/O should use EIO to indicate failure. Other pmem code paths (like bad blocks) already use EIO so let's be consistent. This fixes compatibility with consumers like btrfs that try to parse the specific error code rather than treat all errors the same. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-01-12ARM: dts: NSP: Fix DT ranges errorJon Mason
The range size for axi is 0x2 bytes too small, as the QSPI needs 0x11c408 + 0x004 (which is 0x0011c40c, not 0x0011c40a). No errors have been observed with this shortcoming, but fixing it for correctness. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-12ARM: multi_v7_defconfig: set bcm47xx watchdogValentin Rothberg
Correct the bcm47xx watchdog option. The convention of bcm watchdogs is the _WDT suffix. Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-12ARM: multi_v7_defconfig: fix config typoValentin Rothberg
s/CONFIG_CONFIG_BCM47XX_NVRAM/CONFIG_BCM47XX_NVRAM/ Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-12vfio iommu type1: fix the testing of capability for remote taskJike Song
Before the mdev enhancement type1 iommu used capable() to test the capability of current task; in the course of mdev development a new requirement, testing for another task other than current, was raised. ns_capable() was used for this purpose, however it still tests current, the only difference is, in a specified namespace. Fix it by using has_capability() instead, which tests the cap for specified task in init_user_ns, the same namespace as capable(). Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jike Song <jike.song@intel.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-01-12Merge tag 'sound-4.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This time we got a few more fixes than the previous rc's, and most of commits were about ASoC. The only significant change in the core side is the regression fix wrt the aux device list handling, and all the rest are driver-specific small / trivial fixes" * tag 'sound-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add a quirk for Plantronics BT600 ASoC: rt5645: set sel_i2s_pre_div1 to 2 ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused ASoC: Intel: Skylake: Release FW ctx in cleanup ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode ASoC: fsl_ssi: set fifo watermark to more reliable value ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL ASoC: nau8825: correct the function name of register ASoC: Intel: Skylake: Fix to fail safely if module not available in path ASoC: tlv320aic3x: Mark the RESET register as volatile ASoC: Fix binding and probing of auxiliary components ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data ASoC: Intel: bytcr_rt5640: fallback mechanism if MCLK is not enabled ASoC: hdmi-codec: use unsigned type to structure members with bit-field ASoC: topology: kfree kcontrol->private_value before freeing kcontrol ASoC: rsnd: don't double free kctrl ASoC: dwc: Fix PIO mode initialization
2017-01-12drm/amd/powerplay: refine vce dpm update code on Cz.Rex Zhu
Program HardMin based on the vce_arbiter.ecclk if ecclk is 0, disable ECLK DPM 0. Otherwise VCE could hang if switching SCLK from DPM 0 to 6/7 Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/amdgpu: fix vm_fault_stop on gfx6Flora Cui
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/amd/powerplay: fix vce cg logic error on CZ/St.Rex Zhu
can fix Bug 191281: vce ib test failed. when vce idle, set vce clock gate, so the clock in vce domain will be disabled. when need to encode, disable vce clock gate, enable the clocks to vce engine. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/radeon: drop the mclk quirk for hainanAlex Deucher
fixed by the new 58 mc firmware. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/radeon: drop oland quirksAlex Deucher
Fixed by the new 58 MC firmware. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/amdgpu: drop the mclk quirk for hainanAlex Deucher
fixed by the new 58 mc firmware. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/amdgpu: drop oland quirksAlex Deucher
Fixed by the new 58 MC firmware. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/amdgpu/si: load special ucode for certain MC configsAlex Deucher
Special MC ucode is required for these memory configurations. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12drm/radeon/si: load special ucode for certain MC configsAlex Deucher
Special MC ucode is required for these memory configurations. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-01-12ARM: dts: dra72-evm-revc: fix typo in ethernet-phy nodeSekhar Nori
Fix a typo in impedance setting for ethernet-phy@3 Fixes: b76db38cd8ae ("ARM: dts: dra72-evm-revc: add phy impedance settings") Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12net: thunderx: acpi: fix LMAC initializationVadim Lomovtsev
While probing BGX we requesting appropriate QLM for it's configuration and get LMAC count by that request. Then, while reading configured MAC values from SSDT table we need to save them in proper mapping: BGX[i]->lmac[j].mac = <MAC value> to later provide for initialization stuff. In order to fill such mapping properly we need to add lmac index to be used while acpi initialization since at this moment bgx->lmac_count already contains actual value. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()Wei Yongjun
Fix to return a negative error code from the kthread_run() error handling case instead of 0, as done elsewhere in this function. Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12svcrdma: avoid duplicate dma unmapping during error recoverySriharsha Basavapatna
In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes svc_rdma_put_frmr() which in turn tries to unmap the same sg list through ib_dma_unmap_sg() again. This second unmap is invalid and could lead to problems when the iova being unmapped is subsequently reused. Remove the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr() handle it. Fixes: 412a15c0fe53 ("svcrdma: Port to new memory registration API") Cc: stable@vger.kernel.org Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-12ieee802154: atusb: fix driver to work with older firmware versionsStefan Schmidt
After the addition of the frame_retries callback we could run into cases where a ATUSB device with an older firmware version would now longer be able to bring the interface up. We keep this functionality disabled now if the minimum firmware version for this feature is not available. Fixes: 5d82288b93db3bc ("ieee802154: atusb: implement .set_frame_retries ops callback") Reported-by: Alexander Aring <aar@pengutronix.de> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12at86rf230: Allow slow GPIO pins for "rstn"Andrey Smirnov
Driver code never touches "rstn" signal in atomic context, so there's no need to implicitly put such restriction on it by using gpio_set_value to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to fix that. As a an example of where such restriction might be inconvenient, consider a hardware design where "rstn" is connected to a pin of I2C/SPI GPIO expander chip. Cc: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: do not use the stack for address fetching to make it DMA ableStefan Schmidt
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes a buffer that was introduced in the 4.10 merge window. Fixes: 6cc33eba232c ("ieee802154: atusb: try to read permanent extended address from device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: make sure we set a randaom extended address if fetching failsStefan Schmidt
In the unlikely case were the firmware is new enough but the actual USB command still fails make sure we set a random address and return. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12ieee802154: atusb: do not use the stack for buffers to make them DMA ableStefan Schmidt
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-01-12sunrpc: don't call sleeping functions from the notifier block callbacksScott Mayhew
The inet6addr_chain is an atomic notifier chain, so we can't call anything that might sleep (like lock_sock)... instead of closing the socket from svc_age_temp_xprts_now (which is called by the notifier function), just have the rpc service threads do it instead. Cc: stable@vger.kernel.org Fixes: c3d4879e01be "sunrpc: Add a function to close..." Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-12svcrpc: don't leak contexts on PROC_DESTROYJ. Bruce Fields
Context expiry times are in units of seconds since boot, not unix time. The use of get_seconds() here therefore sets the expiry time decades in the future. This prevents timely freeing of contexts destroyed by client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually (when the module is unloaded or the container shut down), but a lot of contexts could pile up before then. Cc: stable@vger.kernel.org Fixes: c5b29f885afe "sunrpc: use seconds since boot in expiry cache" Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-12nfsd: fix supported attributes for acl & labelsJ. Bruce Fields
Oops--in 916d2d844afd I moved some constants into an array for convenience, but here I'm accidentally writing to that array. The effect is that if you ever encounter a filesystem lacking support for ACLs or security labels, then all queries of supported attributes will report that attribute as unsupported from then on. Fixes: 916d2d844afd "nfsd: clean up supported attribute handling" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-01-12NFSv4: update_changeattr should update the attribute timestampTrond Myklebust
Otherwise, the attribute cache remains marked as being expired. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-01-12NFSv4: Don't call update_changeattr() unless the unlink is successfulTrond Myklebust
If the unlink wasn't successful, then the directory has presumably not changed. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-01-12NFSv4: Don't apply change_info4 twice on rename within a directoryTrond Myklebust
If a file is renamed, but stays in the same directory, we will still receive 2 change_info4 structures describing the change to that directory, but we only want to apply it once. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-01-12NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was createdTrond Myklebust
We don't want to invalidate the directory attribute and data cache unless we know that a file was created, or the change attribute differs from the one in our cache. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-01-12net: ipv4: fix table id in getroute responseDavid Ahern
rtm_table is an 8-bit field while table ids are allowed up to u32. Commit 709772e6e065 ("net: Fix routing tables with id > 255 for legacy software") added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the table id is > 255. The table id returned on get route requests should do the same. Fixes: c36ba6603a11 ("net: Allow user to get table id from route lookup") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12net: qcom/emac: grab a reference to the phydev on ACPI systemsTimur Tabi
Commit 6ffe1c4cd0a7 ("net: qcom/emac: fix of_node and phydev leaks") fixed the problem with reference leaks on phydev, but the fix is device-tree specific. When the driver unloads, the reference is dropped only on DT systems. Instead, it's cleaner if up grab an reference on ACPI systems. When the driver unloads, we can drop the reference without having to check whether we're on a DT system. Signed-off-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12net: lwtunnel: Handle lwtunnel_fill_encap failureDavid Ahern
Handle failure in lwtunnel_fill_encap adding attributes to skb. Fixes: 571e722676fe ("ipv4: support for fib route lwtunnel encap attributes") Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12i2c: piix4: Avoid race conditions with IMCRicardo Ribalda
On AMD's SB800 and upwards, the SMBus is shared with the Integrated Micro Controller (IMC). The platform provides a hardware semaphore to avoid race conditions among them. (Check page 288 of the SB800-Series Southbridges Register Reference Guide http://support.amd.com/TechDocs/45482.pdf) Without this patch, many access to the SMBus end with an invalid transaction or even with the bus stalled. Reported-by: Alexandre Desnoyers <alex@qtec.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>: Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12drm/probe-helpers: Drop locking from poll_enableDaniel Vetter
It was only needed to protect the connector_list walking, see commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jul 9 23:44:26 2015 +0200 drm/probe-helper: Grab mode_config.mutex in poll_init/enable Unfortunately the commit message of that patch fails to mention that the new locking check was for the connector_list. But that requirement disappeared in commit c36a3254f7857f1ad9badbe3578ccc92be541a8e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Dec 15 16:58:43 2016 +0100 drm: Convert all helpers to drm_connector_list_iter and so we can drop this again. This fixes a locking inversion on nouveau, where the rpm code needs to re-enable. But in other places the rpm_get() calls are nested within the big modeset locks. While at it, also improve the kerneldoc for these two functions a notch. v2: Update the kerneldoc even more to explain that these functions can't be called concurrently, or bad things happen (Chris). Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Lyude <lyude@redhat.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111090117.5134-1-daniel.vetter@ffwll.ch
2017-01-12i2c: fix spelling mistake: "insufficent" -> "insufficient"Colin Ian King
Trivial fix to spelling mistake in WARN message, insufficient has an insufficient number of i's in the spelling. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12Merge tag 'xfs-for-linus-4.10-rc4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "As promised last week, here's some stability fixes from Christoph and Jan Kara: - fix free space request handling when low on disk space - remove redundant log failure error messages - free truncated dirty pages instead of letting them build up forever" * tag 'xfs-for-linus-4.10-rc4-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Timely free truncated dirty pages xfs: don't print warnings when xfs_log_force fails xfs: don't rely on ->total in xfs_alloc_space_available xfs: adjust allocation length in xfs_alloc_space_available xfs: fix bogus minleft manipulations xfs: bump up reserved blocks in xfs_alloc_set_aside
2017-01-12i2c: print correct device invalid addressJohn Garry
In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing") Cc: stable@kernel.org
2017-01-12i2c: do not enable fall back to Host Notify by defaultDmitry Torokhov
Falling back unconditionally to HostNotify as primary client's interrupt breaks some drivers which alter their functionality depending on whether interrupt is present or not, so let's introduce a board flag telling I2C core explicitly if we want wired interrupt or HostNotify-based one: I2C_CLIENT_HOST_NOTIFY. For DT-based systems we introduce "host-notify" property that we convert to I2C_CLIENT_HOST_NOTIFY board flag. Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12i2c: fix kernel memory disclosure in dev interfaceVlad Tsyrklevich
i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2017-01-12Merge tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc fixes from Bjorn Andersson: "This fixes two regressions that have been reported to be introduced in v4.10-rc1. - correct an incorrect usage of the kref api - revert the change to make the resource table read-only. As the space each vdev resource is used as virtio device config space it must be shared with the remote" * tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteproc: Revert "remoteproc: Merge table_ptr and cached_table pointers" remoteproc: fix vdev reference management
2017-01-12Merge tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteprocLinus Torvalds
Pull rpmsg fixes from Bjorn Andersson: "This fixes a regression introduced in v4.10-rc1 that prohibits multiple channels with the same name but different endpoint addresses to be used" * tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteproc: rpmsg: virtio_rpmsg_bus: fix channel creation
2017-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - device descriptor length validation fix to hid-cypress driver from Greg - introduction of a short delay into i2c-hid, which is not really mandated by the spec, but fixes Asus Touchpads - Petzl USB connectable flashlight quirk from myself * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: Add sleep between POWER ON and RESET HID: hid-cypress: validate length of report HID: ignore Petzl USB headlamp
2017-01-12Merge branch 'scsi-target-for-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux Pull scsi target fixes from Bart Van Assche: - a series of bug fixes for the XCOPY implementation from David Disseldorp - one bug fix for the ibmvscsis driver, a driver that is used for communication between partitions on IBM POWER systems. * 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux: ibmvscsis: Fix srp_transfer_data fail return code target: support XCOPY requests without parameters target: check for XCOPY parameter truncation target: use XCOPY segment descriptor CSCD IDs target: check XCOPY segment descriptor CSCD IDs target: simplify XCOPY wwn->se_dev lookup helper target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense target: bounds check XCOPY total descriptor list length target: bounds check XCOPY segment descriptor list target: use XCOPY TOO MANY TARGET DESCRIPTORS sense target: add XCOPY target/segment desc sense codes
2017-01-12ceph: fix get_oldest_context()Geng, Jichao
For no snapshot case, we should use ci->truncate_{seq,size}. Fixes: 5f743e456606 ("ceph: record truncate size/seq for snap data writeback") Signed-off-by: Geng, Jichao <geng.jichao@h3c.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-01-12ceph: fix mds cluster availability checkYan, Zheng
We should apply the check after getting the initial mdsmap. Fixes: e9e427f0a14f ("ceph: check availability of mds cluster on mount") Link: http://tracker.ceph.com/issues/18161 Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-01-12Merge tag 'md/4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull md fixes from Shaohua Li: "Basically one fix for raid5 cache which is merged in this cycle, others are trival fixes" * tag 'md/4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: Use correct IS_ERR() variation on pointer check md: cleanup mddev flag clear for takeover md/r5cache: fix spelling mistake on "recoverying" md/r5cache: assign conf->log before r5l_load_log() md/r5cache: simplify handling of sh->log_start in recovery md/raid5-cache: removes unnecessary write-through mode judgments md/raid10: Refactor raid10_make_request md/raid1: Refactor raid1_make_request
2017-01-12arm64: assembler: make adr_l work in modules under KASLRArd Biesheuvel
When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded modules and the core kernel may exceed 4 GB, putting symbols exported by the core kernel out of the reach of the ordinary adrp/add instruction pairs used to generate relative symbol references. So make the adr_l macro emit a movz/movk sequence instead when executing in module context. While at it, remove the pointless special case for the stack pointer. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit (git 2.34.1) at 2025-09-12 14:13:27 +0000