summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-09x86/CPU: Add native CPUID variants returning a single datumBorislav Petkov
... similarly to the cpuid_<reg>() variants. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170109114147.5082-2-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-09md/raid5: Use correct IS_ERR() variation on pointer checkJes Sorensen
This fixes a build error on certain architectures, such as ppc64. Fixes: 6995f0b247e("md: takeover should clear unrelated bits") Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-09xfs: don't print warnings when xfs_log_force failsChristoph Hellwig
There are only two reasons for xfs_log_force / xfs_log_force_lsn to fail: one is an I/O error, for which xlog_bdstrat already logs a warning, and the second is an already shutdown log due to a previous I/O errors. In the latter case we'll already have a previous indication for the actual error, but the large stream of misleading warnings from xfs_log_force will probably scroll it out of the message buffer. Simply removing the warnings thus makes the XFS log reporting significantly better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-09xfs: don't rely on ->total in xfs_alloc_space_availableChristoph Hellwig
->total is a bit of an odd parameter passed down to the low-level allocator all the way from the high-level callers. It's supposed to contain the maximum number of blocks to be allocated for the whole transaction [1]. But in xfs_iomap_write_allocate we only convert existing delayed allocations and thus only have a minimal block reservation for the current transaction, so xfs_alloc_space_available can't use it for the allocation decisions. Use the maximum of args->total and the calculated block requirement to make a decision. We probably should get rid of args->total eventually and instead apply ->minleft more broadly, but that will require some extensive changes all over. [1] which creates lots of confusion as most callers don't decrement it once doing a first allocation. But that's for a separate series. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-09xfs: adjust allocation length in xfs_alloc_space_availableChristoph Hellwig
We must decide in xfs_alloc_fix_freelist if we can perform an allocation from a given AG is possible or not based on the available space, and should not fail the allocation past that point on a healthy file system. But currently we have two additional places that second-guess xfs_alloc_fix_freelist: xfs_alloc_ag_vextent tries to adjust the maxlen parameter to remove the reservation before doing the allocation (but ignores the various minium freespace requirements), and xfs_alloc_fix_minleft tries to fix up the allocated length after we've found an extent, but ignores the reservations and also doesn't take the AGFL into account (and thus fails allocations for not matching minlen in some cases). Remove all these later fixups and just correct the maxlen argument inside xfs_alloc_fix_freelist once we have the AGF buffer locked. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-09xfs: fix bogus minleft manipulationsChristoph Hellwig
We can't just set minleft to 0 when we're low on space - that's exactly what we need minleft for: to protect space in the AG for btree block allocations when we are low on free space. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-09xfs: bump up reserved blocks in xfs_alloc_set_asideChristoph Hellwig
Setting aside 4 blocks globally for bmbt splits isn't all that useful, as different threads can allocate space in parallel. Bump it to 4 blocks per AG to allow each thread that is currently doing an allocation to dip into it separately. Without that we may no have enough reserved blocks if there are enough parallel transactions in an almost out space file system that all run into bmap btree splits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-09tcp: do not export tcp_peer_is_proven()Eric Dumazet
After commit 1fb6f159fd21 ("tcp: add tcp_conn_request"), tcp_peer_is_proven() no longer needs to be exported. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: phy: Add Meson GXL PHY hardware dependencyJean Delvare
As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net/appletalk: Fix kernel memory disclosureVlad Tsyrklevich
ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09ipv4: make tcp_notsent_lowat sysctl knob behave as true unsigned intPavel Tikhomirov
> cat /proc/sys/net/ipv4/tcp_notsent_lowat -1 > echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat -bash: echo: write error: Invalid argument > echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat > cat /proc/sys/net/ipv4/tcp_notsent_lowat -2147483648 but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER" v2: simplify to just proc_douintvec Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09ipv6: fix typosAlexander Alemayhu
o s/approriate/appropriate o s/discouvery/discovery Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge tag 'drm-fixes-for-v4.10-rc4' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "amdgpu, radeon, msm, meson, tilcdc, drm fixes. Just back online for a couple of days, gathered up the remaining fixes pull requests. This contains fixes for a few ARM platforms (msm, tilcdc, meson), and one core atomic fix. The AMD pull has some new hardware support (Polaris12) in it, but this is pretty limited to just hw enablement and shouldn't cause any problems" * tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm: Clean up planes in atomic commit helper failure path drm: tilcdc: simplify the recovery from sync lost error on rev1 drm/meson: Fix plane atomic check when no crtc for the plane drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'gpio-v4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - move freeing of GPIO hogs to after freeing the device to get rid of a warning state. - a small compile warning fix * tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Move freeing of GPIO hogs before numbing of the device gpio: mxs: remove __init annotation
2017-01-09phy state machine: failsafe leave invalid RUNNING stateZefir Kurtisi
While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso. 2) Fix out of bounds access in nf_tables discovered by KASAN, from Florian Westphal. 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko. 4) Fix unicast filtering in be2net driver, from Ivan Vecera. 5) tg3_get_stats64() can race with driver close and ethtool reconfigurations, fix from Michael Chan. 6) Fix error handling when pass limit is reached in bpf code gen on x86. From Daniel Borkmann. 7) Don't clobber switch ops and use proper MDIO nested reads and writes in bcm_sf2 driver, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) net: dsa: bcm_sf2: Utilize nested MDIO read/write net: dsa: bcm_sf2: Do not clobber b53_switch_ops net: stmmac: fix maxmtu assignment to be within valid range bpf: change back to orig prog on too many passes tg3: Fix race condition in tg3_get_stats64(). be2net: fix unicast list filling be2net: fix accesses to unicast list netlabel: add CALIPSO to the list of built-in protocols vti6: fix device register to report IFLA_INFO_KIND net: phy: dp83867: fix irq generation amd-xgbe: Fix IRQ processing when running in single IRQ mode sh_eth: R8A7740 supports packet shecksumming sh_eth: fix EESIPR values for SH77{34|63} r8169: fix the typo in the comment nl80211: fix sched scan netlink socket owner destruction bridge: netfilter: Fix dropping packets that moving through bridge interface netfilter: ipt_CLUSTERIP: check duplicate config when initializing netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set netfilter: nf_tables: fix oob access netfilter: nft_queue: use raw_smp_processor_id() ...
2017-01-09tcp: fix mark propagation with fwmark_reflect enabledPau Espin Pedrol
Otherwise, RST packets generated by the TCP stack for non-existing sockets always have mark 0. The mark from the original packet is assigned to the netns_ipv4/6 socket used to send the response so that it can get copied into the response skb when the socket sends it. Fixes: e110861f8609 ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Pau Espin Pedrol <pau.espin@tessares.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-09netfilter: use fwmark_reflect in nf_send_resetPau Espin Pedrol
Otherwise, RST packets generated by ipt_REJECT always have mark 0 when the routing is checked later in the same code path. Fixes: e110861f8609 ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Pau Espin Pedrol <pau.espin@tessares.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-09USB: serial: ch341: fix baud rate and line-control handlingJohan Hovold
Revert to using direct register writes to set the divisor and line-control registers. A recent change switched to using the init vendor command to update these registers, something which also enabled support for CH341A devices. It turns out that simply setting bit 7 in the divisor register is sufficient to support CH341A and specifically prevent data from being buffered until a full endpoint-size packet (32 bytes) has been received. Using the init command also had the side-effect of temporarily deasserting the DTR/RTS signals on every termios change (including initialisation on open) something which for example could cause problems in setups where DTR is used to trigger a reset. Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix line settings after reset-resumeJohan Hovold
A recent change added support for modifying the default line-control settings, but did not make sure that the modified settings were used as part of reconfiguration after a device has been reset during resume. This caused a port that was open before suspend to be unusable until being closed and reopened. Fixes: ba781bdf8662 ("USB: serial: ch341: add support for parity, frame length, stop bits") Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix resume after resetJohan Hovold
Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix open error handlingJohan Hovold
Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix modem-control and B0 handlingJohan Hovold
The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix open and resume after B0Johan Hovold
The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09USB: serial: ch341: fix initial modem-control stateJohan Hovold
DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-09ASoC: rt5645: set sel_i2s_pre_div1 to 2Bard Liao
The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09spi: spi-axi: Free resources on error pathChristophe JAILLET
We should go to 'err_put_master' here instead of returning directly. Otherwise a call to 'spi_master_put' is missing. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09x86/boot: Add missing declaration of string functionsNicholas Mc Guire
Add the missing declarations of basic string functions to string.h to allow a clean build. Fixes: 5be865661516 ("String-handling functions for the new x86 setup code.") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-hofrat@osadl.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-09btrfs: make tracepoint format strings more compactDavid Sterba
We've recently added the fsid to trace events, this makes the line quite long. To reduce the it again, remove extra spaces around = and remove ",". Signed-off-by: David Sterba <dsterba@suse.com>
2017-01-09Btrfs: add truncated_len for ordered extent tracepointsLiu Bo
This can help us monitor truncated ordered extents. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-01-09Btrfs: add 'inode' for extent map tracepointLiu Bo
'inode' is an important field for btrfs_get_extent, lets trace it. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-01-09btrfs: fix crash when tracepoint arguments are freed by wq callbacksDavid Sterba
Enabling btrfs tracepoints leads to instant crash, as reported. The wq callbacks could free the memory and the tracepoints started to dereference the members to get to fs_info. The proposed fix https://marc.info/?l=linux-btrfs&m=148172436722606&w=2 removed the tracepoints but we could preserve them by passing only the required data in a safe way. Fixes: bc074524e123 ("btrfs: prefix fsid to all trace events") CC: stable@vger.kernel.org # 4.8+ Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-01-09mac80211: implement multicast forwarding on fast-RX pathJohannes Berg
In AP (or VLAN) mode, when unicast 802.11 packets are received, they might actually be multicast after conversion. In this case the fast-RX path didn't handle them properly to send them back to the wireless medium. Implement that by copying the SKB and sending it back out. The possible alternative would be to just punt the packet back to the regular (slow) RX path, but since we have almost all of the required code here already it's not so complicated to add here. Punting it back would also mean acquiring the spinlock, which would be bad for the stated purpose of the fast-RX path, to enable well-performing parallel RX. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-09drm/i915/gvt: cleanup GFP flagsJike Song
In gvt, almost all memory allocations are in sleepable contexts. It's fault-prone to use GFP_ATOMIC everywhere. Replace it with GFP_KERNEL wherever possible. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/bridge: analogix dp: Fix runtime PM state on driver bindMarek Szyprowski
Analogix_dp_bind() can be called from component framework, which doesn't guarantee proper runtime PM state of the device during bind operation, so ensure that device is runtime active before doing any register access. This ensures that the power domain, to which DP module belongs, is turned on. While at it, also fix the unbalanced call to phy_power_on() in analogix_dp_bind() function. This patch solves the following kernel oops on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 75 Comm: kworker/0:2 Not tainted 4.9.0 #1046 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func task: ee272300 task.stack: ee312000 PC is at analogix_dp_enable_sw_function+0x18/0x2c LR is at analogix_dp_init_dp+0x2c/0x50 ... [<c03fcb38>] (analogix_dp_enable_sw_function) from [<c03fa9c4>] (analogix_dp_init_dp+0x2c/0x50) [<c03fa9c4>] (analogix_dp_init_dp) from [<c03fab6c>] (analogix_dp_bind+0x184/0x42c) [<c03fab6c>] (analogix_dp_bind) from [<c03fdb84>] (component_bind_all+0xf0/0x218) [<c03fdb84>] (component_bind_all) from [<c03ed64c>] (exynos_drm_load+0x134/0x200) [<c03ed64c>] (exynos_drm_load) from [<c03d5058>] (drm_dev_register+0xa0/0xd0) [<c03d5058>] (drm_dev_register) from [<c03d66b8>] (drm_platform_init+0x58/0xb0) [<c03d66b8>] (drm_platform_init) from [<c03fe0c4>] (try_to_bring_up_master+0x14c/0x188) [<c03fe0c4>] (try_to_bring_up_master) from [<c03fe188>] (component_add+0x88/0x138) [<c03fe188>] (component_add) from [<c0403a38>] (platform_drv_probe+0x50/0xb0) [<c0403a38>] (platform_drv_probe) from [<c0402470>] (driver_probe_device+0x1f0/0x2a8) [<c0402470>] (driver_probe_device) from [<c0400a54>] (bus_for_each_drv+0x44/0x8c) [<c0400a54>] (bus_for_each_drv) from [<c04021f8>] (__device_attach+0x9c/0x100) [<c04021f8>] (__device_attach) from [<c04018e8>] (bus_probe_device+0x84/0x8c) [<c04018e8>] (bus_probe_device) from [<c0401d1c>] (deferred_probe_work_func+0x60/0x8c) [<c0401d1c>] (deferred_probe_work_func) from [<c012fc14>] (process_one_work+0x120/0x318) [<c012fc14>] (process_one_work) from [<c012fe34>] (process_scheduled_works+0x28/0x38) [<c012fe34>] (process_scheduled_works) from [<c0130048>] (worker_thread+0x204/0x4ac) [<c0130048>] (worker_thread) from [<c01352c4>] (kthread+0xd8/0xf4) [<c01352c4>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) Code: e59035f0 e5935018 f57ff04f e3c55001 (f57ff04e) ---[ end trace 3d1d0d87796de344 ]--- Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1483091866-1088-1-git-send-email-m.szyprowski@samsung.com
2017-01-08Merge remote-tracking branch 'mkp-scsi/fixes' into fixesJames Bottomley
2017-01-09drm/i915/gvt/kvmgt: return meaningful error for vgpu creating failureJike Song
The vgpu_create() routine we called returns meaningful errors to indicate failures, so we'd better to pass it to our caller, the mdev framework, whereby the sysfs is able to tell userspace what happened. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: cleanup opregion memory allocation codeJike Song
According to the spec, ACPI OpRegion must be placed at a physical address below 4G. That is, for a vGPU it must be associated with a GPA below 4G, but on host side, it doesn't matter where the backing pages actually are. So when allocating pages from host, the GFP_DMA32 flag is unnecessary. Also the allocation is from a sleepable context, so GFP_ATOMIC is also unnecessary. This patch also removes INTEL_GVT_OPREGION_PORDER and use get_order() instead. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: destroy the allocated idr on vgpu creating failuresJike Song
Once idr_alloc gets called data is allocated within the idr list, if any error occurs afterwards, we should undo that by idr_remove on the error path. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: init/destroy vgpu_idr properlyJike Song
An idr should be initialized before use and destroyed afterwards. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: dec vgpu->running_workload_num after the workload is really doneChangbin Du
The vgpu->running_workload_num is used to determine whether a vgpu has any workload running or not. So we should make sure the workload is really done before we dec running_workload_num. Function complete_current_workload is not the right place to do it, since this function is still processing the workload. This patch move the dec op afterward. v2: move dec op before wake_up(&scheduler->workload_complete_wq) (Min He) Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Min He <min.he@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: fix use after free for workloadChangbin Du
In the function workload_thread(), we invoke complete_current_workload() to cleanup the just processed workload (workload will be freed there). So we cannot access workload->req after that. This patch move complete_current_workload() afterward. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: remove duplicated definitionZhenyu Wang
Remove duplicated definition for resource size in aperture_gm.c which are already defined in gvt.h. Need only one to take effect. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: adjust high memory size for default vGPU typeZhenyu Wang
Previous high mem size initialized for vGPU type was too small which caused failure for some VMs. This trys to take minimal value of 384MB for each VM and enlarge default high mem size to make guest driver happy. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: print correct value for untracked mmioPei Zhang
In function intel_vgpu_emulate_mmio_read, the untracked mmio register is dumped through kernel log, but the register value is not correct. This patch fixes this issue. V2: fix the fromat warning from checkpatch.pl. Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: always use readq and writeqChangbin Du
The readq and writeq are already offered by drm_os_linux.h. So we can use them directly whithout dectecting their presence. This patch removed the duplicated code. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: fix return value in mul_force_wake_writeChangbin Du
All mmio handlers should return a negetive value for failure, not 1. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: fix error handing of tlb_control emulationChangbin Du
Return ealier for a invalid access, else it would false set tlb flag for RCS. Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-09drm/i915/gvt: verify functions types in new_mmio_info()Nicolas Iooss
The current prototype of new_mmio_info() uses void* for parameters read and write, which are functions with precise calling conventions (argument types and return type). Write down these conventions in new_mmio_info() definition. This has been reported by the following warnings when clang is used to build the kernel: drivers/gpu/drm/i915/gvt/handlers.c:124:21: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->read = read ? read : intel_vgpu_default_mmio_read; ^ ~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gvt/handlers.c:125:23: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->write = write ? write : intel_vgpu_default_mmio_write; ^ ~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This allows the compiler to detect that sbi_ctl_mmio_write() returns a "bool" value instead of an expected "int" one. Fix this. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-01-08Merge branch 'bcm_sf2-fixes'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple fixes Here are a couple of fixes for bcm_sf2, please queue these up for -stable as well, thank you very much! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 21:43:23 +0000