summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-11raid5: need to set STRIPE_HANDLE for batch headGuoqing Jiang
With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni <xni@redhat.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11afs: Show volume name in /proc/net/afs/<cell>/volumesDavid Howells
Show the name of each volume in /proc/net/afs/<cell>/volumes to make it easier to work out the name corresponding to a volume ID. This makes it easier to work out which mounts in /proc/mounts correspond to which volume ID. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
2019-12-11afs: Fix missing cell comparison in afs_test_super()David Howells
Fix missing cell comparison in afs_test_super(). Without this, any pair volumes that have the same volume ID will share a superblock, no matter the cell, unless they're in different network namespaces. Normally, most users will only deal with a single cell and so they won't see this. Even if they do look into a second cell, they won't see a problem unless they happen to hit a volume with the same ID as one they've already got mounted. Before the patch: # ls /afs/grand.central.org/archive linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # ls /afs/kth.se/ linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # cat /proc/mounts | grep afs none /afs afs rw,relatime,dyn,autocell 0 0 #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0 #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0 #grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0 After the patch: # ls /afs/grand.central.org/archive linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/ # ls /afs/kth.se/ admin/ common/ install/ OldFiles/ service/ system/ bakrestores/ home/ misc/ pkg/ src/ wsadmin/ # cat /proc/mounts | grep afs none /afs afs rw,relatime,dyn,autocell 0 0 #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0 #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0 #kth.se:root.cell /afs/kth.se afs ro,relatime 0 0 Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Carsten Jacobi <jacobi@de.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org> cc: Todd DeSantis <atd@us.ibm.com>
2019-12-11afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPPDavid Howells
Fix the lookup method on the dynamic root directory such that creation calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP rather than failing with some odd error (such as EEXIST). lookup() itself tries to create automount directories when it is invoked. These are cached locally in RAM and not committed to storage. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
2019-12-11kselftest: Support old perl versionsSeongJae Park
On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error message: Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10. This commit fixes the error by explicitly specifying the use of the `IO::Handle` package. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-11kselftest/runner: Print new line in print of timeout logSeongJae Park
If a timeout failure occurs, kselftest kills the test process and prints the timeout log. If the test process has killed while printing a log that ends with new line, the timeout log can be printed in middle of the test process output so that it can be seems like a comment, as below: # test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT This commit avoids such problem by printing one more line before the TIMEOUT failure log. Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-11selftests: Fix dangling documentation references to kselftest_module.shMichael Ellerman
Commit c78fd76f2b67 ("selftests: Move kselftest_module.sh into kselftest/") moved kselftest_module.sh but missed updating a few references to the path in documentation. Fixes: c78fd76f2b67 ("selftests: Move kselftest_module.sh into kselftest/") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-11afs: Fix mountpoint parsingDavid Howells
Each AFS mountpoint has strings that define the target to be mounted. This is required to end in a dot that is supposed to be stripped off. The string can include suffixes of ".readonly" or ".backup" - which are supposed to come before the terminal dot. To add to the confusion, the "fs lsmount" afs utility does not show the terminal dot when displaying the string. The kernel mount source string parser, however, assumes that the terminal dot marks the suffix and that the suffix is always "" and is thus ignored. In most cases, there is no suffix and this is not a problem - but if there is a suffix, it is lost and this affects the ability to mount the correct volume. The command line mount command, on the other hand, is expected not to include a terminal dot - so the problem doesn't arise there. Fix this by making sure that the dot exists and then stripping it when passing the string to the mount configuration. Fixes: bec5eb614130 ("AFS: Implement an autocell mount capability [ver #2]") Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
2019-12-11Merge tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson
into arm/fixes Reset controller fixes for v5.5, part 2 Fix the example in the brcmstb-reset device tree bindings, remove a bogus resource alignment check from the reset-brcmstb driver, fix the documented return value type for the reset_control_array_get functions, and fix a devres memory leak when requesting optional, not present reset controls. * tag 'reset-fixes-for-v5.5-2' of git://git.pengutronix.de/git/pza/linux: reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example Link: https://lore.kernel.org/r/bb59b9f83892aa3c876f5da87890b0496f2dc755.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11Merge tag 'arm-soc/for-5.5/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for v5.5-rc1, please pull the following: - Nicolas fixes the SoC's dma-range property to cover the full 1GB aperture - Stefan fixes the critical temperature trip point to be set before the firmware performs thermal throttling - Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected #address-cells and #size-cells properties * tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix critical trip point ARM: dts: Cygnus: Fix MDIO node address/size cells ARM: dts: bcm2711: fix soc's node dma-ranges ARM: dts: BCM5301X: Fix MDIO node address/size cells Link: https://lore.kernel.org/r/20191210205850.12442-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: mmp: include the correct cputype.hArnd Bergmann
The file was moved, causing a build error: In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28: arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory Include it from the new location. Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-11ARM: dts: am437x-gp/epos-evm: fix panel compatibleTomi Valkeinen
The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-11spi: spi-ti-qspi: Fix a bug when accessing non default CSVignesh Raghavendra
When switching ChipSelect from default CS0 to any other CS, driver fails to update the bits in system control module register that control which CS is mapped for MMIO access. This causes reads to fail when driver tries to access QSPI flash on CS1/2/3. Fix this by updating appropriate bits whenever active CS changes. Reported-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11regulator: max77650: add of_match tableBartosz Golaszewski
We need the of_match table if we want to use the compatible string in the pmic's child node and get the regulator driver loaded automatically. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20191210100725.11005-1-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-11perf header: Fix false warning when there are no duplicate cache entriesMichael Petlan
Before this patch, perf expected that there might be NPROC*4 unique cache entries at max, however, it also expected that some of them would be shared and/or of the same size, thus the final number of entries would be reduced to be lower than NPROC*4. In case the number of entries hadn't been reduced (was NPROC*4), the warning was printed. However, some systems might have unusual cache topology, such as the following two-processor KVM guest: cpu level shared_cpu_list size 0 1 0 32K 0 1 0 64K 0 2 0 512K 0 3 0 8192K 1 1 1 32K 1 1 1 64K 1 2 1 512K 1 3 1 8192K This KVM guest has 8 (NPROC*4) unique cache entries, which used to make perf printing the message, although there actually aren't "way too many cpu caches". v2: Removing unused argument. v3: Unifying the way we obtain number of cpus. v4: Removed '& UINT_MAX' construct which is redundant. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11perf metricgroup: Fix printing event names of metric group with multiple eventsKajol Jain
Commit f01642e4912b ("perf metricgroup: Support multiple events for metricgroup") introduced support for multiple events in a metric group. But with the current upstream, metric events names are not printed properly In power9 platform: command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2 1.000208486 2.000368863 2.001400558 Similarly in skylake platform: command:./perf stat --metric-only -M Power -I 1000 1.000579994 2.002189493 With current upstream version, issue is with event name comparison logic in find_evsel_group(). Current logic is to compare events belonging to a metric group to the events in perf_evlist. Since the break statement is missing in the loop used for comparison between metric group and perf_evlist events, the loop continues to execute even after getting a pattern match, and end up in discarding the matches. Incase of single metric event belongs to metric group, its working fine, because in case of single event once it compare all events it reaches to end of perf_evlist. Example for single metric event in power9 platform: command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1 1.000094653 0.2 1.001337059 0.0 This patch fixes the issue by making sure once we found all events belongs to that metric event matched in find_evsel_group(), we successfully break from that loop by adding corresponding condition. With this patch: In power9 platform: command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2 result:# time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent 1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0 2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0 command:# ./perf stat --metric-only -M Power -I 1000 Similarly in skylake platform: result:# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency 1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0 2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0 Committer testing: Before: [root@seventh ~]# perf stat --metric-only -M Power -I 1000 # time 1.000383223 2.001168182 3.001968545 4.002741200 5.003442022 ^C 5.777687244 [root@seventh ~]# After the patch: [root@seventh ~]# perf stat --metric-only -M Power -I 1000 # time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency 1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0 2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0 3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0 4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0 5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0 ^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0 [root@seventh ~]# [root@seventh ~]# dmesg | grep -i skylake [ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [root@seventh ~]# Fixes: f01642e4912b ("perf metricgroup: Support multiple events for metricgroup") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11perf/x86/pmu-events: Fix Kernel_Utilization metricRavi Bangoria
Kernel Utilization should divide ref cycles spent in kernel with total ref cycles. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Haiyan Song <haiyanx.song@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20191204162121.29998-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11perf top: Do not bail out when perf_env__read_cpuid() returns ENOSYSArnaldo Carvalho de Melo
'perf top' stopped working on hw architectures that do not provide a get_cpuid() implementation and thus fallback to the weak get_cpuid() default function. This is done because at annotation time we may need it in the arch specific annotation init routine, but that is only being used by arches that do provide a get_cpuid() implementation: $ find tools/ -name "*.[ch]" | xargs grep 'evlist->env' tools/perf/builtin-top.c: top.evlist->env = &perf_env; tools/perf/util/evsel.c: return evsel->evlist->env; tools/perf/util/s390-cpumsf.c: sf->machine_type = s390_cpumsf_get_type(session->evlist->env->cpuid); tools/perf/util/header.c: session->evlist->env = &header->env; tools/perf/util/sample-raw.c: const char *arch_pf = perf_env__arch(evlist->env); $ $ find tools/perf/arch -name "*.[ch]" | xargs grep -w get_cpuid tools/perf/arch/x86/util/auxtrace.c: ret = get_cpuid(buffer, sizeof(buffer)); tools/perf/arch/x86/util/header.c:get_cpuid(char *buffer, size_t sz) tools/perf/arch/powerpc/util/header.c:get_cpuid(char *buffer, size_t sz) tools/perf/arch/s390/util/header.c: * Implementation of get_cpuid(). tools/perf/arch/s390/util/header.c:int get_cpuid(char *buffer, size_t sz) tools/perf/arch/s390/util/header.c: if (buf && get_cpuid(buf, 128)) $ For 'report' or 'script', i.e. tools working on perf.data files, that is setup while reading the header, its just top that needs to explicitely read it at tool start. Fixes: 608127f73779 ("perf top: Initialize perf_env->cpuid, needed by the per arch annotation init routine") Reported-by: John Garry <john.garry@huawei.com> Analysed-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: John Garry <john.garry@huawei.com> # arm64 Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11perf arch: Make the default get_cpuid() return compatible errorArnaldo Carvalho de Melo
Some of the functions calling get_cpuid() propagate back the error it returns, and all are using errno (positive) values, make the weak default get_cpuid() function return ENOSYS to be consistent and to allow checking if this is an arch not providing this function or if a provided one is having trouble getting the cpuid, to decide if the warning should be provided to the user or just a debug message should be emitted. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: John Garry <john.garry@huawei.com> # arm64 Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11dt-bindings: net: ti: cpsw-switch: update to fix commentsGrygorii Strashko
After original patch was merged there were additional comments/requests provided by Rob Herring [1]. Mostly they are related to json-schema usage, and this patch fixes them. Also SPDX-License-Identifier has been changed to (GPL-2.0-only OR BSD-2-Clause) as requested. [1] https://lkml.org/lkml/2019/11/21/875 Fixes: ef63fe72f698 ("dt-bindings: net: ti: add new cpsw switch driver bindings") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [robh: Remove 2 more maxItems that aren't necessary] Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-11dt-bindings: remoteproc: stm32: add wakeup-source propertyArnaud Pouliquen
If the optional wdg interrupt is defined, then this property may be defined. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-11xhci: make sure interrupts are restored to correct stateMathias Nyman
spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng
I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11usb: xhci: only set D3hot for pci deviceHenry Lin
Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman
A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11Merge tag 'fixes-for-v5.5-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.5-rc2 Only four patches here this time around. Three of them are on dwc3 fixing some small bugs related to our 'started' flag. None are major fixes but they're important nevertheless. * tag 'fixes-for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: fix wrong endpoint desc usb: dwc3: ep0: Clear started flag on completion usb: dwc3: gadget: Clear started flag for non-IOC usb: dwc3: gadget: Fix logical condition
2019-12-11drm/i915: Serialise with remote retirementChris Wilson
Since retirement may be running in a worker on another CPU, it may be skipped in the local intel_gt_wait_for_idle(). To ensure the state is consistent for our sanity checks upon load, serialise with the remote retirer by waiting on the timeline->mutex. Outside of this use case, e.g. on suspend or module unload, we expect the slack to be picked up by intel_gt_pm_wait_for_idle() and so prefer to put the special case serialisation with retirement in its single user, for now at least. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-2-chris@chris-wilson.co.uk (cherry picked from commit 2d0fb251360ab7eccbffd99f6933a2a4de678d52) Fixes: 093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree") Closes: https://gitlab.freedesktop.org/drm/intel/issues/754 Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-11virtio_balloon: divide/multiply instead of shiftsMichael S. Tsirkin
We managed to get confused about the shift direction at least once. Let's switch to division/multiplcation instead. Add a number of pages macro for this purpose. We still keep the order macro around too since this is what alloc/free pages want. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2019-12-11virtio_balloon: name cleanupsMichael S. Tsirkin
free_page_order is a confusing name. It's not a page order actually, it's the order of the block of memory we are hinting. Rename to hint_block_order. Also, rename SIZE to BYTES to make it clear it's the block size in bytes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2019-12-11virtio-balloon: fix managed page counts when migrating pages between zonesDavid Hildenbrand
In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. One way to reproduce: 1. Start a QEMU guest with 4GB, no NUMA 2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL 3. Inflate the balloon to 1GB 4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it) 5. Observe /proc/zoneinfo Node 0, zone Normal pages free 16810 min 24848885473806 low 18471592959183339 high 36918337032892872 spanned 262144 present 262144 managed 18446744073709533486 6. Do anything that requires some memory (e.g., inflate the balloon some more). The OOM goes crazy and the system crashes [ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00 [ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 [ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75 [ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 238.341121] Call Trace: [ 238.341337] dump_stack+0x8f/0xd0 [ 238.341630] dump_header+0x61/0x5ea [ 238.341942] oom_kill_process.cold+0xb/0x10 [ 238.342299] out_of_memory+0x24d/0x5a0 [ 238.342625] __alloc_pages_slowpath+0xd12/0x1020 [ 238.343024] __alloc_pages_nodemask+0x391/0x410 [ 238.343407] pagecache_get_page+0xc3/0x3a0 [ 238.343757] filemap_fault+0x804/0xc30 [ 238.344083] ? ext4_filemap_fault+0x28/0x42 [ 238.344444] ext4_filemap_fault+0x30/0x42 [ 238.344789] __do_fault+0x37/0x1a0 [ 238.345087] __handle_mm_fault+0x104d/0x1ab0 [ 238.345450] handle_mm_fault+0x169/0x360 [ 238.345790] do_user_addr_fault+0x20d/0x490 [ 238.346154] do_page_fault+0x31/0x210 [ 238.346468] async_page_fault+0x43/0x50 [ 238.346797] RIP: 0033:0x7f47eba4197e [ 238.347110] Code: Bad RIP value. [ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293 [ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e [ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004 [ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033 [ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0 [ 238.350878] Mem-Info: [ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0 [ 238.351085] active_file:12 inactive_file:7 isolated_file:0 [ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0 [ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170 [ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0 [ 238.351085] free:720717 free_pcp:2 free_cma:0 [ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss [ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB [ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884 [ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B [ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865 [ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB [ 238.364765] lowmem_reserve[]: 0 0 0 0 0 [ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B [ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B [ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B [ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 238.369915] 130 total pagecache pages [ 238.370241] 0 pages in swap cache [ 238.370533] Swap cache stats: add 0, delete 0, find 0/0 [ 238.370981] Free swap = 0kB [ 238.371239] Total swap = 0kB [ 238.371488] 1048445 pages RAM [ 238.371756] 0 pages HighMem/MovableOnly [ 238.372090] 306992 pages reserved [ 238.372376] 0 pages cma reserved [ 238.372661] 0 pages hwpoisoned In another instance (older kernel), I was able to observe this (negative page count :/): [ 180.896971] Offlined Pages 32768 [ 182.667462] Offlined Pages 32768 [ 184.408117] Offlined Pages 32768 [ 186.026321] Offlined Pages 32768 [ 187.684861] Offlined Pages 32768 [ 189.227013] Offlined Pages 32768 [ 190.830303] Offlined Pages 32768 [ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009 In another instance (older kernel), I was no longer able to start any process: [root@vm ~]# [ 214.348068] Offlined Pages 32768 [ 215.973009] Offlined Pages 32768 cat /proc/meminfo -bash: fork: Cannot allocate memory [root@vm ~]# cat /proc/meminfo -bash: fork: Cannot allocate memory Fix it by properly adjusting the managed page count when migrating if the zone changed. The managed page count of the zones now looks after unplug of the DIMM (and after deflating the balloon) just like before inflating the balloon (and plugging+onlining the DIMM). We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Please note that fixing up the managed page count is only necessary when we adjusted the managed page count when inflating - only if we don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the managed page count is not touched when inflating/deflating. Reported-by: Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-11tools headers kvm: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 22945688acd4 ("KVM: PPC: Book3S HV: Support reset of secure guest") No tools changes are caused by this, as the only defines so far used from these files are for syscall arg pretty printing are: $ grep KVM tools/perf/trace/beauty/*.sh tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ This addresses these tools/perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Link: https://lkml.kernel.org/n/tip-bdbe4x02johhul05a03o27zj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11Merge remote-tracking branch 'torvalds/master' into perf/urgentArnaldo Carvalho de Melo
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test': 7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arches 1fd450f99272 libbpf: Fix up generation of bpf_helper_defs.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-12-11bpftool: Don't crash on missing jited insns or ksymsToke Høiland-Jørgensen
When the kptr_restrict sysctl is set, the kernel can fail to return jited_ksyms or jited_prog_insns, but still have positive values in nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when trying to dump the program because it only checks the len fields not the actual pointers to the instructions and ksyms. Fix this by adding the missing checks. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Fixes: f84192ee00b7 ("tools: bpftool: resolve calls without using imm field") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
2019-12-11bpf: Fix build in minimal configurations, againArnd Bergmann
Building with -Werror showed another failure: kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31': kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds] ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2; I don't actually understand why the array is empty, but a similar fix has addressed a related problem, so I suppose we can do the same thing here. Fixes: ce27709b8162 ("bpf: Fix build in minimal configurations") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de
2019-12-11bpf, mips: Limit to 33 tail callsPaul Chaignon
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls limit at runtime. In addition, a test was recently added, in tailcalls2, to check this limit. This patch updates the tail call limit in MIPS' JIT compiler to allow 33 tail calls. Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com> Signed-off-by: Paul Chaignon <paul.chaignon@orange.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
2019-12-11bpf, riscv: Limit to 33 tail callsPaul Chaignon
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls limit at runtime. In addition, a test was recently added, in tailcalls2, to check this limit. This patch updates the tail call limit in RISC-V's JIT compiler to allow 33 tail calls. I tested it using the above selftest on an emulated RISCV64. Fixes: 2353ecc6f91f ("bpf, riscv: add BPF JIT for RV64G") Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com> Signed-off-by: Paul Chaignon <paul.chaignon@orange.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
2019-12-11dmaengine: dma-jz4780: Also break descriptor chains on JZ4725BPaul Cercueil
It turns out that the JZ4725B displays the same buggy behaviour as the JZ4740 that was described in commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740"). Work around it by using the same workaround previously used for the JZ4740. Fixes commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191210165545.59690-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-11tomoyo: Don't use nifty names on sockets.Tetsuo Handa
syzbot is reporting that use of SOCKET_I()->sk from open() can result in use after free problem [1], for socket's inode is still reachable via /proc/pid/fd/n despite destruction of SOCKET_I()->sk already completed. At first I thought that this race condition applies to only open/getattr permission checks. But James Morris has pointed out that there are more permission checks where this race condition applies to. Thus, get rid of tomoyo_get_socket_name() instead of conditionally bypassing permission checks on sockets. As a side effect of this patch, "socket:[family=\$:type=\$:protocol=\$]" in the policy files has to be rewritten to "socket:[\$]". [1] https://syzkaller.appspot.com/bug?id=73d590010454403d55164cca23bd0565b1eb3b74 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+0341f6a4d729d4e0acf1@syzkaller.appspotmail.com> Reported-by: James Morris <jmorris@namei.org>
2019-12-11dmaengine: Fix access to uninitialized dma_slave_capsLukas Wunner
dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-11gpio: pca953x: Switch to bitops in IRQ callbacksAndy Shevchenko
Since we have driver converted to use bitmap API we must use traditional bit operations (set_bit(), clear_bit(), etc.) against it. Currently IRQ callbacks are missed in the conversion and thus broken. Let's fix it right here right now. Fixes: 35d13d94893f ("gpio: pca953x: convert to use bitmap API") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpiolib: fix up emulated open drain outputsRussell King
gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11MAINTAINERS: Append missed file to the databaseAndy Shevchenko
When gpiolib.h internal header had been split to few, the commit 77cb907abe6c ("gpiolib: acpi: Split ACPI stuff to gpiolib-acpi.h") in particular missed the MAINTAINERS database update. Do it here. Fixes: 77cb907abe6c ("gpiolib: acpi: Split ACPI stuff to gpiolib-acpi.h") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11arm64: dts: ls1028a: fix typo in TMU calibration dataMichael Walle
The temperature sensor may jump backwards because there is a wrong calibration value. Both values have to be monotonically increasing. Fix it. This was tested on a custom board. Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11gpio: xgs-iproc: remove __exit annotation for iproc_gpio_removeArnd Bergmann
When built into the kernel, the driver causes a link problem: `iproc_gpio_remove' referenced in section `.data' of drivers/gpio/gpio-xgs-iproc.o: defined in discarded section `.exit.text' of drivers/gpio/gpio-xgs-iproc.o Remove the incorrect annotation. Fixes: 6a41b6c5fc20 ("gpio: Add xgs-iproc driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpio: aspeed: avoid return type warningArnd Bergmann
gcc has a hard time tracking whether BUG_ON(1) ends execution or not: drivers/gpio/gpio-aspeed-sgpio.c: In function 'bank_reg': drivers/gpio/gpio-aspeed-sgpio.c:112:1: error: control reaches end of non-void function [-Werror=return-type] Use the simpler BUG() that gcc knows cannot continue. Fixes: f8b410e3695a ("gpio: aspeed-sgpio: Rename and add Kconfig/Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11gpio: mockup: Fix usage of new GPIO_LINE_DIRECTIONKent Gibson
Restore the external behavior of gpio-mockup to what it was prior to the change to using GPIO_LINE_DIRECTION. Fixes: e42615ec233b ("gpio: Use new GPIO_LINE_DIRECTION") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-11drm/i915/gvt: use vgpu lock for active state settingZhenyu Wang
Need to align with deactivate, should only use vgpu's lock for active state setting instead of gvt lock. Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access") Cc: Colin Xu <colin.xu@intel.com> Reviewed-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191202070109.73924-2-zhenyuw@linux.intel.com
2019-12-11USB: Fix incorrect DMA allocations for local memory pool driversFredrik Noring
Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") where local memory USB drivers erroneously allocate DMA memory instead of pool memory, causing OHCI Unrecoverable Error, disabled HC died; cleaning up The order between hcd_uses_dma() and hcd->localmem_pool is now arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the test for hcd->localmem_pool placed first. As an alternative, one might consider adjusting hcd_uses_dma() with static inline bool hcd_uses_dma(struct usb_hcd *hcd) { - return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA); + return IS_ENABLED(CONFIG_HAS_DMA) && + (hcd->driver->flags & HCD_DMA) && + (hcd->localmem_pool == NULL); } One can also consider unsetting HCD_DMA for local memory pool drivers. Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fredrik Noring <noring@nocrew.org> Link: https://lore.kernel.org/r/20191210172905.GA52526@sx9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 23:00:51 +0000