| Age | Commit message (Collapse) | Author |
|---|
|
The number of CPUs is tuned to allow "4*CFLIST TREE10" on a large system,
up from "3*CFLIST TREE10" previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit aids testing of RCU task stall warning messages by adding
an rcutorture.stall_cpu_block module parameter that results in the
induced stall sleeping within the RCU read-side critical section.
Spinning with interrupts disabled is still available via the
rcutorture.stall_cpu_irqsoff module parameter, and specifying neither
of these two module parameters will spin with preemption disabled.
Note that sleeping (as opposed to preemption) results in additional
complaints from RCU at context-switch time, so yet more testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Avoid potential NULL dereference in huge_pte_alloc() on pmd_alloc()
failure"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: avoid potential NULL dereference
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, mostly for ARM and AMD, and more documentation.
Slightly bigger than usual because I couldn't send out what was
pending for rc4, but there is nothing worrisome going on. I have more
fixes pending for guest debugging support (gdbstub) but I will send
them next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM: selftests: Fix build for evmcs.h
kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
docs/virt/kvm: Document configuring and running nested guests
KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
KVM: x86: Fixes posted interrupt check for IRQs delivery modes
KVM: SVM: fill in kvm_run->debug.arch.dr[67]
KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
KVM: arm64: Fix 32bit PC wrap-around
KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
KVM: arm64: Save/restore sp_el0 as part of __guest_enter
KVM: arm64: Delete duplicated label in invalid_vector
KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
...
|
|
Pull configfs fix from Christoph Hellwig:
"Fix a refcount leak in configfs_rmdir (Xiyu Yang)"
* tag 'configfs-for-5.7' of git://git.infradead.org/users/hch/configfs:
configfs: fix config_item refcnt leak in configfs_rmdir()
|
|
do_splice() is used by io_uring, as will be do_tee(). Move f_mode
checks from sys_{splice,tee}() to do_{splice,tee}(), so they're
enforced for io_uring as well.
Fixes: 7d67af2c0134 ("io_uring: add splice(2) support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Kristen found a hang in objtool when building with -ffunction-sections.
It was caused by evergreen_pcie_gen2_enable.cold() being laid out
immediately before evergreen_pcie_gen2_enable(). Since their "pfunc" is
always the same, find_jump_table() got into an infinite loop because it
didn't recognize the boundary between the two functions.
Fix that with a new prev_insn_same_sym() helper, which doesn't cross
subfunction boundaries.
Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/378b51c9d9c894dc3294bc460b4b0869e950b7c5.1588110291.git.jpoimboe@redhat.com
|
|
it doesn't actually exist...
Test: builds and 'git grep tcp_default_init_rwnd' comes up empty
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we fill up a receive VQ, try_fill_recv currently tries to count
kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that
uses a seqcount. sequence counts are "lock" constructs where you need to
make sure that writers are serialized.
In turn, this means that we mustn't run two try_fill_recv concurrently.
Which of course we don't. We do run try_fill_recv sometimes from a
softirq napi context, and sometimes from a fully preemptible context,
but the later always runs with napi disabled.
However, when it comes to the seqcount, lockdep is trying to enforce the
rule that the same lock isn't accessed from preemptible and softirq
context - it doesn't know about napi being enabled/disabled. This causes
a false-positive warning:
WARNING: inconsistent lock state
...
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
As a work around, shut down the warning by switching
to u64_stats_update_begin_irqsave - that works by disabling
interrupts on 32 bit only, is a NOP on 64 bit.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bdi_dev_name is not a fast path function, move it out of line. This
prepares for using it from modular callers without having to export
an implementation detail like bdi_unknown_name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Simplify the bdi name to mirror what we are doing elsewhere, and
drop them name in favor of just using a number. This avoids a
potentially very long bdi name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Need to clear some bits in a vendor-defined register after reboot from
Windows 10.
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Reported-by: Grzegorz Kowal <custos.mentis@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Grzegorz Kowal <custos.mentis@gmail.com>
Link: https://lore.kernel.org/r/20200504063957.6638-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If devm_request_threaded_irq() fails, the allocated struct mmc_host needs
to be freed via calling mmc_free_host(), so let's do that.
Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200426202355.43055-1-christophe.jaillet@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The kernel prints a message similar to
"[ 28.881959] do_IRQ: 5.36 No irq handler for vector"
when GL975x resumes from suspend. Implement a resume callback to fix this.
Fixes: 31e43f31890c ("mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x")
Co-developed-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Signed-off-by: Renius Chen <renius.chen@genesyslogic.com.tw>
Tested-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Vineeth Pillai <vineethrp@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200427103048.20785-1-benchuanggli@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
[Samuel Zou: Make sdhci_pci_gli_resume() static]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When single-step triggered with KVM_SET_GUEST_DEBUG, we should fill in the pc
value with current linear RIP rather than the cached singlestep address.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
RTM should always been set even with KVM_EXIT_DEBUG on #DB.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Go through kvm_queue_exception_p so that the payload is correctly delivered
through the exit qualification, and add a kvm_update_dr6 call to
kvm_deliver_exception_payload that is needed on AMD.
Reported-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported. My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.
The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may
pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL:
| CC arch/arm64/mm/pageattr.o
| CC arch/arm64/mm/hugetlbpage.o
| from arch/arm64/mm/hugetlbpage.c:10:
| arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’:
| ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference]
| ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’
| arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’
| |arch/arm64/mm/hugetlbpage.c:232:10:
| |./arch/arm64/include/asm/pgtable-types.h:28:24:
| ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’
| arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’
This can only occur when the kernel cannot allocate a page, and so is
unlikely to happen in practice before other systems start failing.
We can avoid this by bailing out if pmd_alloc() fails, as we do earlier
in the function if pud_alloc() fails.
Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Kyrill Tkachov <kyrylo.tkachov@arm.com>
Cc: <stable@vger.kernel.org> # 4.5.x-
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
gpr2 is not a parametre of kuap_check(), it doesn't exist.
Use gpr instead.
Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr
|
|
To prevent verifying the kernel module appended signature
twice (finit_module), once by the module_sig_check() and again by IMA,
powerpc secure boot rules define an IMA architecture specific policy
rule only if CONFIG_MODULE_SIG_FORCE is not enabled. This,
unfortunately, does not take into account the ability of enabling
"sig_enforce" on the boot command line (module.sig_enforce=1).
Including the IMA module appraise rule results in failing the
finit_module syscall, unless the module signing public key is loaded
onto the IMA keyring.
This patch fixes secure boot policy rules to be based on
CONFIG_MODULE_SIG instead.
Fixes: 4238fad366a6 ("powerpc/ima: Add support to initialize ima policy rules")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/1588342612-14532-1-git-send-email-nayna@linux.ibm.com
|
|
Currently we check to make sure there is no error state on the extcon
handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using
the USB role-switch API we still need to write to this register absent an
extcon handle.
This patch makes the appropriate update to ensure the write happens if
role-switching is true.
Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support")
Cc: stable <stable@vger.kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull networking fixes from David Miller:
1) Fix reference count leaks in various parts of batman-adv, from Xiyu
Yang.
2) Update NAT checksum even when it is zero, from Guillaume Nault.
3) sk_psock reference count leak in tls code, also from Xiyu Yang.
4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
fq_codel, from Eric Dumazet.
5) Fix panic in choke_reset(), also from Eric Dumazet.
6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.
7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.
8) Fix crash in x25_disconnect(), from Yue Haibing.
9) Don't pass pointer to local variable back to the caller in
nf_osf_hdr_ctx_init(), from Arnd Bergmann.
10) Wireguard should use the ECN decap helper functions, from Toke
Høiland-Jørgensen.
11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.
12) Fix uninitialized variable access in mptcp's
subflow_syn_recv_sock(), from Paolo Abeni.
13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
Scott Dial.
14) IPv6 needs to use a global serial number for dst validation just
like ipv4, from David Ahern.
15) Fix up PTP_1588_CLOCK deps, from Clay McClure.
16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
Yoshiyuki Kurauchi.
17) Fix a regression in that dsa user port errors should not be fatal,
from Florian Fainelli.
18) Fix iomap leak in enetc driver, from Dejin Zheng.
19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.
20) Initialize protocol value earlier in neigh code paths when
generating events, from Roman Mashak.
21) netdev_update_features() must be called with RTNL mutex in macsec
driver, from Antoine Tenart.
22) Validate untrusted GSO packets even more strictly, from Willem de
Bruijn.
23) Wireguard decrypt worker needs a cond_resched(), from Jason
Donenfeld.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
wireguard: send/receive: cond_resched() when processing worker ringbuffers
wireguard: socket: remove errant restriction on looping to self
wireguard: selftests: use normal kernel stack size on ppc64
net: ethernet: ti: am65-cpsw-nuss: fix irqs type
ionic: Use debugfs_create_bool() to export bool
net: dsa: Do not leave DSA master with NULL netdev_ops
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
net: stricter validation of untrusted gso packets
seg6: fix SRH processing to comply with RFC8754
net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
net: dsa: ocelot: the MAC table on Felix is twice as large
net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
net: hsr: fix incorrect type usage for protocol variable
net: macsec: fix rtnl locking issue
net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
...
|
|
This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver
that the frontend does not need counters, this hw stats type request
never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests
the driver to disable the stats, however, if the driver cannot disable
counters, it bails out.
TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_*
except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED
(this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between
TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9b038086f06b ("docs: networking: convert DIM to RST") added a new
file entry to DYNAMIC INTERRUPT MODERATION to the end, and not following
alphabetical order.
So, ./scripts/checkpatch.pl -f MAINTAINERS complains:
WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic
order
#5966: FILE: MAINTAINERS:5966:
+F: lib/dim/
+F: Documentation/networking/net_dim.rst
Reorder the file entries to keep MAINTAINERS nicely ordered.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 5.7-rc5
With Ubuntu and Debian having backported this into their kernels, we're
finally seeing testing from places we hadn't seen prior, which is nice.
With that comes more fixes:
1) The CI for PPC64 was running with extremely small stacks for 64-bit,
causing spurious crashes in surprising places.
2) There's was an old leftover routing loop restriction, which no longer
makes sense given the queueing architecture, and was causing problems
for people who really did want nested routing.
3) Not yielding our kthread on CONFIG_PREEMPT_VOLUNTARY systems caused
RCU stalls and other issues, reported by Wang Jian, with the fix
suggested by Sultan Alsawaf.
4) Clang spewed warnings in a selftest for CONFIG_IPV6=n, reported by
Arnd Bergmann.
5) A complicated if statement was simplified to an assignment while also
making the likely/unlikely hinting more correct and simple, and
increasing readability, suggested by Sultan.
Patches (2) and (3) have Fixes: lines and are probably good candidates
for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
coalescing
It's very unlikely that send will become true. It's nearly always false
between 0 and 120 seconds of a session, and in most cases becomes true
only between 120 and 121 seconds before becoming false again. So,
unlikely(send) is clearly the right option here.
What happened before was that we had this complex boolean expression
with multiple likely and unlikely clauses nested. Since this is
evaluated left-to-right anyway, the whole thing got converted to
unlikely. So, we can clean this up to better represent what's going on.
The generated code is the same.
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without setting these to NULL, clang complains in certain
configurations that have CONFIG_IPV6=n:
In file included from drivers/net/wireguard/ratelimiter.c:223:
drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized]
ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
^~~~
drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning
struct sk_buff *skb4, *skb6;
^
= NULL
drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized]
ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
^~~~
drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning
struct ipv6hdr *hdr6;
^
We silence this warning by setting the variables to NULL as the warning
suggests.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Users with pathological hardware reported CPU stalls on CONFIG_
PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning
these workers would never terminate. That turned out not to be okay on
systems without forced preemption, which Sultan observed. This commit
adds a cond_resched() to the bottom of each loop iteration, so that
these workers don't hog the core. Note that we don't need this on the
napi poll worker, since that terminates after its budget is expended.
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reported-by: Wang Jian <larkwang@gmail.com>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.
At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Interrupts that use fast_interrupt_return actually do lock AMR, but
they have been ones which tend to come from userspace (or kernel bugs)
in radix mode. With kuap on hash, segment interrupts are taken in
kernel often, which quickly breaks due to the missing restore.
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-6-npiggin@gmail.com
|
|
The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs
triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX
IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs
triggering and NAPI scheduling for empty queues. It was discovered with
RT-kernel.
Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as
IRQF_TRIGGER_HIGH.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently bool ionic_cq.done_color is exported using
debugfs_create_u8(), which requires a cast, preventing further compiler
checks.
Fix this by switching to debugfs_create_bool(), and dropping the cast.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When ndo_get_phys_port_name() for the CPU port was added we introduced
an early check for when the DSA master network device in
dsa_master_ndo_setup() already implements ndo_get_phys_port_name(). When
we perform the teardown operation in dsa_master_ndo_teardown() we would
not be checking that cpu_dp->orig_ndo_ops was successfully allocated and
non-NULL initialized.
With network device drivers such as virtio_net, this leads to a NPD as
soon as the DSA switch hanging off of it gets torn down because we are
now assigning the virtio_net device's netdev_ops a NULL pointer.
Fixes: da7b9e9b00d4 ("net: dsa: Add ndo_get_phys_port_name() for CPU port")
Reported-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This was caused by a poor merge conflict resolution on my side. The
"act = &cls->rule->action.entries[0];" assignment was already present in
the code prior to the patch mentioned below.
Fixes: e13c2075280e ("net: dsa: refactor matchall mirred action to separate function")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller again found a path to a kernel crash through bad gso input:
a packet with transport header extending beyond skb_headlen(skb).
Tighten validation at kernel entry:
- Verify that the transport header lies within the linear section.
To avoid pulling linux/tcp.h, verify just sizeof tcphdr.
tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use.
- Match the gso_type against the ip_proto found by the flow dissector.
Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Segment Routing Header (SRH) which defines the SRv6 dataplane is defined
in RFC8754.
RFC8754 (section 4.1) defines the SR source node behavior which encapsulates
packets into an outer IPv6 header and SRH. The SR source node encodes the
full list of Segments that defines the packet path in the SRH. Then, the
first segment from list of Segments is copied into the Destination address
of the outer IPv6 header and the packet is sent to the first hop in its path
towards the destination.
If the Segment list has only one segment, the SR source node can omit the SRH
as he only segment is added in the destination address.
RFC8754 (section 4.1.1) defines the Reduced SRH, when a source does not
require the entire SID list to be preserved in the SRH. A reduced SRH does
not contain the first segment of the related SR Policy (the first segment is
the one already in the DA of the IPv6 header), and the Last Entry field is
set to n-2, where n is the number of elements in the SR Policy.
RFC8754 (section 4.3.1.1) defines the SRH processing and the logic to
validate the SRH (S09, S10, S11) which works for both reduced and
non-reduced behaviors.
This patch updates seg6_validate_srh() to validate the SRH as per RFC8754.
Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
FDB fixes for Felix and Ocelot switches
This series fixes the following problems:
- Dynamically learnt addresses never expiring (neither for Ocelot nor
for Felix)
- Half of the FDB not visible in 'bridge fdb show' (for Felix only)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One may notice that automatically-learnt entries 'never' expire, even
though the bridge configures the address age period at 300 seconds.
Actually the value written to hardware corresponds to a time interval
1000 times higher than intended, i.e. 83 hours.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Faineli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC
addresses would appear, sometimes they wouldn't.
Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192
entries on VSC9959 (Felix), so the existing code from the Ocelot common
library only dumped half of Felix's MAC table. They are both organized
as a 4-way set-associative TCAM, so we just need a single variable
indicating the correct number of rows.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Benson Leung:
"Fix a resource allocation issue in cros_ec_sensorhub.c"
* tag 'tag-chrome-platform-fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before claiming sensors
|
|
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e9488d ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de
|
|
The presumption is that by using a circular counter that is twice as
large as the maximum ELSP submission, we would never reuse the same CCID
for two inflight contexts.
However, if we continually preempt an active context such that it always
remains inflight, it can be resubmitted with an arbitrary number of
paired contexts. As each of its paired contexts will use a new CCID,
eventually it will wrap and submit two ELSP with the same CCID.
Rather than use a simple circular counter, switch over to a small bitmap
of inflight ids so we can avoid reusing one that is still potentially
active.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-2-chris@chris-wilson.co.uk
(cherry picked from commit 5c4a53e3b1cbc38d0906e382f1037290658759bb)
(cherry picked from commit 134711240307d5586ae8e828d2699db70a8b74f2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The bspec is confusing on the nature of the upper 32bits of the LRC
descriptor. Once upon a time, it said that it uses the upper 32b to
decide if it should perform a lite-restore, and so we must ensure that
each unique context submitted to HW is given a unique CCID [for the
duration of it being on the HW]. Currently, this is achieved by using
a small circular tag, and assigning every context submitted to HW a
new id. However, this tag is being cleared on repinning an inflight
context such that we end up re-using the 0 tag for multiple contexts.
To avoid accidentally clearing the CCID in the upper 32bits of the LRC
descriptor, split the descriptor into two dwords so we can update the
GGTT address separately from the CCID.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-1-chris@chris-wilson.co.uk
(cherry picked from commit 2632f174a2e1a5fd40a70404fa8ccfd0b1f79ebd)
(cherry picked from commit a4b70fcc587860f4b972f68217d8ebebe295ec15)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since moving the obj->vma.list to a spin_lock, and the vm->bound_list to
its vm->mutex, along with tracking shrinkable status under its own
spinlock, we no long require the object to be locked by the caller.
This is fortunate as it appears we can be called with the lock along an
error path in flipping:
<4> [139.942851] WARN_ON(debug_locks && !lock_is_held(&(&((obj)->base.resv)->lock.base)->dep_map))
<4> [139.943242] WARNING: CPU: 0 PID: 1203 at drivers/gpu/drm/i915/gem/i915_gem_domain.c:405 i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943263] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core r8169 lpc_ich snd_pcm realtek prime_numbers [last unloaded: i915]
<4> [139.943347] CPU: 0 PID: 1203 Comm: kms_flip Tainted: G U 5.6.0-gd0fda5c2cf3f1-drmtip_474+ #1
<4> [139.943363] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<4> [139.943589] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943589] Code: 85 28 01 00 00 be ff ff ff ff 48 8d 78 60 e8 d7 9b f0 e2 85 c0 75 b9 48 c7 c6 50 b9 38 c0 48 c7 c7 e9 48 3c c0 e8 20 d4 e9 e2 <0f> 0b eb a2 48 c7 c1 08 bb 38 c0 ba 0a 01 00 00 48 c7 c6 88 a3 35
<4> [139.943589] RSP: 0018:ffffb774c0603b48 EFLAGS: 00010282
<4> [139.943589] RAX: 0000000000000000 RBX: ffff9a142fa36e80 RCX: 0000000000000006
<4> [139.943589] RDX: 000000000000160d RSI: ffff9a142c1a88f8 RDI: ffffffffa434a64d
<4> [139.943589] RBP: ffff9a1410a513c0 R08: ffff9a142c1a88f8 R09: 0000000000000000
<4> [139.943589] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9a1436ee94b8
<4> [139.943589] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff9a1410960000
<4> [139.943589] FS: 00007fc73a744e40(0000) GS:ffff9a143da00000(0000) knlGS:0000000000000000
<4> [139.943589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [139.943589] CR2: 00007fc73997e098 CR3: 000000002f5fe000 CR4: 00000000000006f0
<4> [139.943589] Call Trace:
<4> [139.943589] intel_pin_and_fence_fb_obj+0x1c9/0x1f0 [i915]
<4> [139.943589] intel_plane_pin_fb+0x3f/0xd0 [i915]
<4> [139.943589] intel_prepare_plane_fb+0x13b/0x5c0 [i915]
<4> [139.943589] drm_atomic_helper_prepare_planes+0x85/0x110
<4> [139.943589] intel_atomic_commit+0xda/0x390 [i915]
<4> [139.943589] drm_atomic_helper_page_flip+0x9c/0xd0
<4> [139.943589] ? drm_event_reserve_init+0x46/0x60
<4> [139.943589] drm_mode_page_flip_ioctl+0x587/0x5d0
This completes the symmetry lost in commit 8b1c78e06e61 ("drm/i915: Avoid
calling i915_gem_object_unbind holding object lock").
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1743
Fixes: 8b1c78e06e61 ("drm/i915: Avoid calling i915_gem_object_unbind holding object lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-1-chris@chris-wilson.co.uk
(cherry picked from commit a95f3ac21d64d62c746f836598d1467d5837fa28)
(cherry picked from commit 2208b85fa1766ee4821a9435d548578b67090531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!
The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.
v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk
(cherry picked from commit c4e8ba7390346a77ffe33ec3f210bc62e0b6c8c6)
(cherry picked from commit cd60e4ac4738a6921592c4f7baf87f9a3499f0e2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Do an early rejection of a i915_vma_unbind() attempt if the i915_vma is
currently pinned, without waiting to see if the inflight operations may
unpin it. We see this problem with the shrinker trying to unbind the
active vma from inside its bind worker:
<6> [472.618968] Workqueue: events_unbound fence_work [i915]
<4> [472.618970] Call Trace:
<4> [472.618974] ? __schedule+0x2e5/0x810
<4> [472.618978] schedule+0x37/0xe0
<4> [472.618982] schedule_preempt_disabled+0xf/0x20
<4> [472.618984] __mutex_lock+0x281/0x9c0
<4> [472.618987] ? mark_held_locks+0x49/0x70
<4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60
<4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619122] i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915]
<4> [472.619208] i915_gem_shrink+0x328/0x660 [i915]
<4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915]
<4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80
<4> [472.619363] ? __alloc_pd+0xb/0x30 [i915]
<4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30
<4> [472.619368] ? __module_address+0x23/0xe0
<4> [472.619371] ? is_module_address+0x26/0x40
<4> [472.619374] ? static_obj+0x34/0x50
<4> [472.619376] ? lockdep_init_map+0x4d/0x1e0
<4> [472.619407] setup_page_dma+0xd/0x90 [i915]
<4> [472.619437] alloc_pd+0x29/0x50 [i915]
<4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915]
<4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915]
<4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915]
<4> [472.619577] __vma_bind+0x26/0x40 [i915]
<4> [472.619611] fence_work+0x1c/0x90 [i915]
<4> [472.619617] process_one_work+0x26a/0x620
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403120150.17091-1-chris@chris-wilson.co.uk
(cherry picked from commit 614654abe847a42fc75d7eb5096e46f796a438b6)
(cherry picked from commit dd086cf516d9bea3878abb267f62ccc53acd764b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
