summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-19net: wwan: Expose secondary AT port on DATA1Jaime Breva
Our use-case needs two AT ports available: One for running a ppp daemon, and another one for management This patch enables a second AT port on DATA1 Signed-off-by: Jaime Breva <jbreva@nayarsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: dma: use napi_build_skbFelix Fietkau
Improves performance by using bulk allocation Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7615: increase eeprom size for mt7663Felix Fietkau
mt7663 efuse has 0x600 bytes instead of 0x400. Increase the size in order to fix issues with incomplete calibration data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19Merge branch 'mptcp-fixes'David S. Miller
Matthieu Baerts says: ==================== mptcp: fixes around listening sockets and the MPTCP worker Christoph Paasch reported a couple of issues found by syzkaller and linked to operations done by the MPTCP worker on (un)accepted sockets. Fixing these issues was not obvious and rather complex but Paolo Abeni nicely managed to propose these excellent patches that seem to satisfy syzkaller. Patch 1 partially reverts a recent fix but while still providing a solution for the previous issue, it also prevents the MPTCP worker from running concurrently with inet_csk_listen_stop(). A warning is then avoided. The partially reverted patch has been introduced in v6.3-rc3, backported up to v6.1 and fixing an issue visible from v5.18. Patch 2 prevents the MPTCP worker to race with mptcp_accept() causing a UaF when a fallback to TCP is done while in parallel, the socket is being accepted by the userspace. This is also a fix of a previous fix introduced in v6.3-rc3, backported up to v6.1 but here fixing an issue that is in theory there from v5.7. There is no need to backport it up to here as it looks like it is only visible later, around v5.18, see the previous cover-letter linked to this original fix. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
2023-04-19mptcp: fix accept vs worker racePaolo Abeni
The mptcp worker and mptcp_accept() can race, as reported by Christoph: refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Modules linked in: CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25 Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89 RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001 RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100 R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] __mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x56/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x51/0xf0 net/socket.c:653 sock_close+0x18/0x20 net/socket.c:1395 __fput+0x113/0x430 fs/file_table.c:321 task_work_run+0x96/0x100 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x4fc/0x10c0 kernel/exit.c:869 do_group_exit+0x51/0xf0 kernel/exit.c:1019 get_signal+0x12b0/0x1390 kernel/signal.c:2859 arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fec4b4926a9 Code: Unable to access opcode bytes at 0x7fec4b49267f. RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058 RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40 </TASK> The root cause is that the worker can force fallback to TCP the first mptcp subflow, actually deleting the unaccepted msk socket. We can explicitly prevent the race delaying the unaccepted msk deletion at listener shutdown time. In case the closed subflow is later accepted, just drop the mptcp context and let the user-space deal with the paired mptcp socket. Fixes: b6985b9b8295 ("mptcp: use the workqueue to destroy unaccepted sockets") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/375 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mptcp: stops worker on unaccepted sockets at listener closePaolo Abeni
This is a partial revert of the blamed commit, with a relevant change: mptcp_subflow_queue_clean() now just change the msk socket status and stop the worker, so that the UaF issue addressed by the blamed commit is not re-introduced. The above prevents the mptcp worker from running concurrently with inet_csk_listen_stop(), as such race would trigger a warning, as reported by Christoph: RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004 Modules linked in: RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40 </TASK> CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387 RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000 RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005 RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040 R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8 FS: 00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875 __mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427 mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277 mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304 __mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965 __mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057 mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072 inet_release+0x53/0xa0 net/ipv4/af_inet.c:429 __sock_release+0x4e/0xf0 net/socket.c:651 sock_close+0x15/0x20 net/socket.c:1393 __fput+0xff/0x420 fs/file_table.c:321 task_work_run+0x8b/0xe0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296 do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7850af70dc RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0 R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31 R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0 Fixes: 0a3f4f1f9c27 ("mptcp: fix UaF in listener shutdown") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/371 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: rpl: fix rpl header size calculationAlexander Aring
This patch fixes a missing 8 byte for the header size calculation. The ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which points to skb_transport_header(). Currently we only check on the calculated addresses fields using CmprI and CmprE fields, see: https://www.rfc-editor.org/rfc/rfc6554#section-3 there is however a missing 8 byte inside the calculation which stands for the fields before the addresses field. Those 8 bytes are represented by sizeof(struct ipv6_rpl_sr_hdr) expression. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Alexander Aring <aahringo@redhat.com> Reported-by: maxpl0it <maxpl0it@protonmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()Seiji Nishikawa
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19Merge branch 'mlx5e-xdp-extend'David S. Miller
Tariq Toukan says: ==================== net/mlx5e: Extend XDP multi-buffer capabilities This series extends the XDP multi-buffer support in the mlx5e driver. Patchset breakdown: - Infrastructural changes and preparations. - Add XDP multi-buffer support for XDP redirect-in. - Use TX MPWQE (multi-packet WQE) HW feature for non-linear single-segmented XDP frames. - Add XDP multi-buffer support for striding RQ. In Striding RQ, we overcome the lack of headroom and tailroom between the RQ strides by allocating a side page per packet and using it for the xdp_buff descriptor. We structure the xdp_buff so that it contains nothing in the linear part, and the whole packet resides in the fragments. Performance highlight: Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes. CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz. NIC: ConnectX-6 Dx, at 100 Gbps. +----------+-------------+-------------+---------+ | Test | Legacy RQ | Striding RQ | Speedup | +----------+-------------+-------------+---------+ | XDP_DROP | 101,615,544 | 117,191,020 | +15% | +----------+-------------+-------------+---------+ | XDP_TX | 95,608,169 | 117,043,422 | +22% | +----------+-------------+-------------+---------+ Series generated against net commit: e61caf04b9f8 Merge branch 'page_pool-allow-caching-from-safely-localized-napi' I'm submitting this directly as Saeed is traveling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Add XDP multi-buffer support in Striding RQTariq Toukan
Here we add support for multi-buffer XDP handling in Striding RQ, which is our default out-of-the-box RQ type. Before this series, loading such an XDP program would fail, until you switch to the legacy RQ (by unsetting the rx_striding_rq priv-flag). To overcome the lack of headroom and tailroom between the strides, we allocate a side page to be used for the descriptor (xdp_buff / skb) and the linear part. When an XDP program is attached, we structure the xdp_buff so that it contains no data in the linear part, and the whole packet resides in the fragments. In case of XDP_PASS, where an SKB still needs to be created, we copy up to 256 bytes to its linear part, to match the current behavior, and satisfy functions that assume finding the packet headers in the SKB linear part (like eth_type_trans). Performance testing: Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes. CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz. NIC: ConnectX-6 Dx, at 100 Gbps. +----------+-------------+-------------+---------+ | Test | Legacy RQ | Striding RQ | Speedup | +----------+-------------+-------------+---------+ | XDP_DROP | 101,615,544 | 117,191,020 | +15% | +----------+-------------+-------------+---------+ | XDP_TX | 95,608,169 | 117,043,422 | +22% | +----------+-------------+-------------+---------+ Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Prepare non-linear striding RQ for XDP multi-buffer supportTariq Toukan
In preparation for supporting XDP multi-buffer in striding RQ, use xdp_buff struct to describe the packet. Make its skb_shared_info collide the one of the allocated SKB, then add the fragments using the xdp_buff API. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Generalize mlx5e_fill_mxbuf()Tariq Toukan
Make the function more generic. Let it get an additional frame_sz parameter instead of deriving it from the RQ struct. No functional change here, just a preparation for a downstream patch. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: RX, Take shared info fragment addition into a functionTariq Toukan
Introduce mlx5e_add_skb_shared_info_frag(), a function dedicated for adding a fragment into a struct skb_shared_info object. Use it in the Legacy RQ flow. Similar usage will be added in a downstream patch by the corresponding Striding RQ flow. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Allow non-linear single-segment frames in XDP TX MPWQETariq Toukan
Under a few restrictions, TX MPWQE feature can serve multiple TX packets in a single TX descriptor. It requires each of the packets to have a single scatter entry / segment. Today we allow only linear frames to use this feature, although there's no real problem with non-linear ones where the whole packet reside in the first fragment. Expand the XDP TX MPWQE feature support to include such frames. This is in preparation for the downstream patch, in which we will generate such non-linear frames. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Remove un-established assumptions on XDP bufferTariq Toukan
Remove the assumption of non-zero linear length in the XDP xmit function, used to serve both internal XDP_TX operations as well as redirected-in requests. Do not apply the MLX5E_XDP_MIN_INLINE check unless necessary. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Consider large muti-buffer packets in Striding RQ params ↵Tariq Toukan
calculations Function mlx5e_rx_get_linear_stride_sz() returns PAGE_SIZE immediately in case an XDP program is attached. The more accurate formula is ALIGN(sz, PAGE_SIZE), to prevent two packets from residing on the same page. The assumption behind the current code is that sz <= PAGE_SIZE holds for all cases with XDP program set. This is true because it is being called from: - 3 times from Striding RQ flows, in which XDP is not supported for such large packets. - 1 time from Legacy RQ flow, under the condition mlx5e_rx_is_linear_skb(). No functional change here, just removing the implied assumption in preparation for supporting XDP multi-buffer in Striding RQ. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Let XDP checker function get the params as inputTariq Toukan
Change mlx5e_xdp_allowed() so it gets the params structure with the xdp_prog applied, rather than creating a local copy based on the current params in priv. This reduces the amount of memory on the stack, and acts on the exact params instance that's about to be applied. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Improve Striding RQ check with XDPTariq Toukan
Non-linear mem scheme of Striding RQ does not yet support XDP at this point. Take the check where it belongs, inside the params validation function mlx5e_params_validate_xdp(). Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Add support for multi-buffer XDP redirect-inTariq Toukan
Handle multi-buffer XDP redirect-in requests coming through mlx5e_xdp_xmit. Extend struct mlx5e_xmit_data_frags with an additional dma_arr field, to point to the fragments dma mapping, as they cannot be retrieved via the page_pool_get_dma_addr() function. Push a dma_addr xdpi instance per each fragment, and use them in the completion flow to dma_unmap the frags. Finally, remove the restriction in mlx5e_open_xdpsq, and set the flag in xdp_features. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifoTariq Toukan
Here we fix the current wi->num_pkts abuse, as it was used to indicate multiple xdpi entries in the xdpi_fifo. Instead, reduce mlx5e_xdp_info to the size of a single field, making it a union of unions. Per packet, use as many instances as needed to provide the information needed at the time of completion. The sequence of xdpi instances pushed is well defined, derived by the xmit_mode. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: XDP, Remove doubtful unlikely callsTariq Toukan
It is not likely nor unlikely that the xdp buff has fragments, it depends on the program loaded and size of the packet received. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: Introduce extended version for mlx5e_xmit_dataTariq Toukan
Introduce struct mlx5e_xmit_data_frags to be used for non-linear xmit buffers. Let it include sinfo pointer. Take one bit from the len field to indicate if the descriptor has fragments and can be casted-up into the extended version. Zero-init to make sure has_frags, and potentially future fields, are zero when not explicitly assigned. Another field will be added in a downstream patch to indicate and point to dma addresses of the different frags, for redirect-in requests. This simplifies the mlx5e_xmit_xdp_frame/mlx5e_xmit_xdp_frame_mpwqe functions params. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: Move struct mlx5e_xmit_data to datapath headerTariq Toukan
Move TX datapath struct from the generic en.h to the datapath txrx.h header, where it belongs. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net/mlx5e: Move XDP struct and enum to XDP headerTariq Toukan
Move struct mlx5e_xdp_info and enum mlx5e_xdp_xmit_mode from the generic en.h to the XDP header, where they belong. Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19bonding: Fix memory leak when changing bond type to EthernetIdo Schimmel
When a net device is put administratively up, its 'IFF_UP' flag is set (if not set already) and a 'NETDEV_UP' notification is emitted, which causes the 8021q driver to add VLAN ID 0 on the device. The reverse happens when a net device is put administratively down. When changing the type of a bond to Ethernet, its 'IFF_UP' flag is incorrectly cleared, resulting in the kernel skipping the above process and VLAN ID 0 being leaked [1]. Fix by restoring the flag when changing the type to Ethernet, in a similar fashion to the restoration of the 'IFF_SLAVE' flag. The issue can be reproduced using the script in [2], with example out before and after the fix in [3]. [1] unreferenced object 0xffff888103479900 (size 256): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): 00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff8406426c>] vlan_vid_add+0x30c/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 unreferenced object 0xffff88810f6a83e0 (size 32): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G..... 81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff84064369>] vlan_vid_add+0x409/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 [2] ip link add name t-nlmon type nlmon ip link add name t-dummy type dummy ip link add name t-bond type bond mode active-backup ip link set dev t-bond up ip link set dev t-nlmon master t-bond ip link set dev t-nlmon nomaster ip link show dev t-bond ip link set dev t-dummy master t-bond ip link show dev t-bond ip link del dev t-bond ip link del dev t-dummy ip link del dev t-nlmon [3] Before: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff After: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()") Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/ Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtraceHans de Goede
A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Call Trace: <TASK> iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] <snip> Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/ Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/ Cc: Kees Cook <keescook@chromium.org> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-18net: ethernet: stmmac: dwmac-sti: remove stih415/stih416/stid127Alain Volmat
Remove no more supported platforms (stih415/stih416 and stid127) Signed-off-by: Alain Volmat <avolmat@me.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20230416195523.61075-1-avolmat@me.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-18net: mscc: ocelot: remove incompatible prototypesArnd Bergmann
The types for the register argument changed recently, but there are still incompatible prototypes that got left behind, and gcc-13 warns about these: In file included from drivers/net/ethernet/mscc/ocelot.c:13: drivers/net/ethernet/mscc/ocelot.h:97:5: error: conflicting types for 'ocelot_port_readl' due to enum/integer mismatch; have 'u32(struct ocelot_port *, u32)' {aka 'unsigned int(struct ocelot_port *, unsigned int)'} [-Werror=enum-int-mismatch] 97 | u32 ocelot_port_readl(struct ocelot_port *port, u32 reg); | ^~~~~~~~~~~~~~~~~ Just remove the two prototypes, and rely on the copy in the global header. Fixes: 9ecd05794b8d ("net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230417205531.1880657-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-18net: stmmac: propagate feature flags to vlanCorinna Vinschen
stmmac_dev_probe doesn't propagate feature flags to VLANs. So features like offloading don't correspond with the general features and it's not possible to manipulate features via ethtool -K to affect VLANs. Propagate feature flags to vlan features. Drop TSO feature because it does not work on VLANs yet. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/r/20230417192845.590034-1-vinschen@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONGTiezhu Yang
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch, it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and tools/arch/loongarch/include/uapi/asm/bitsperlong.h. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Replace hard-coded values in comments with VALENEnze Li
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are concerned with the VA's MSB which is VALEN-1 instead of always being 47. Fix comments to avoid misleading others. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Enze Li <lienze@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Clean up plat_swiotlb_setup() related codeTiezhu Yang
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted, so clean up the related code. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Check unwind_error() in arch_stack_walk()Tiezhu Yang
We can see the following messages with CONFIG_PROVE_LOCKING=y on LoongArch: BUG: MAX_STACK_TRACE_ENTRIES too low! turning off the locking correctness validator. This is because stack_trace_save() returns a big value after call arch_stack_walk(), here is the call trace: save_trace() stack_trace_save() arch_stack_walk() stack_trace_consume_entry() arch_stack_walk() should return immediately if unwind_next_frame() failed, no need to do the useless loops to increase the value of c->len in stack_trace_consume_entry(), then we can fix the above problem. Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Adjust user_regset_copyin parameter to the correct offsetQing Zhang
Ensure that user_watch_state can be set correctly by the user. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-19LoongArch: Adjust user_watch_state for explicit alignmentQing Zhang
This is done in order to easily calculate the number of breakpoints in hw_break_get()/hw_break_set(). Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18bonding: add software tx timestamping supportHangbin Liu
Currently, bonding only obtain the timestamp (ts) information of the active slave, which is available only for modes 1, 5, and 6. For other modes, bonding only has software rx timestamping support. However, some users who use modes such as LACP also want tx timestamp support. To address this issue, let's check the ts information of each slave. If all slaves support tx timestamping, we can enable tx timestamping support for the bond. Add a note that the get_ts_info may be called with RCU, or rtnl or reference on the device in ethtool.h> Suggested-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20230418034841.2566262-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Unbreak br_netfilter physdev match support, from Florian Westphal. 2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian. 3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal. 4) Fix validation of catch-all set element. 5) Tighten requirements for catch-all set elements. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements netfilter: nf_tables: validate catch-all set elements netfilter: nf_tables: fix ifdef to also consider nf_tables=m netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT netfilter: br_netfilter: fix recent physdev match breakage ==================== Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-18nilfs2: initialize unused bytes in segment summary blocksRyusuke Konishi
Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field"). This is because the unused bytes at the end of each block in segment summaries are not initialized. So this fixes the issue by padding the unused bytes with null bytes. Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pagesMel Gorman
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is taking an excessive amount of time for large amounts of memory. Further testing allocating huge pages that the cost is linear i.e. if allocating 1G pages in batches of 10 then the time to allocate nr_hugepages from 10->20->30->etc increases linearly even though 10 pages are allocated at each step. Profiles indicated that much of the time is spent checking the validity within already existing huge pages and then attempting a migration that fails after isolating the range, draining pages and a whole lot of other useless work. Commit eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig") removed two checks, one which ignored huge pages for contiguous allocations as huge pages can sometimes migrate. While there may be value on migrating a 2M page to satisfy a 1G allocation, it's potentially expensive if the 1G allocation fails and it's pointless to try moving a 1G page for a new 1G allocation or scan the tail pages for valid PFNs. Reintroduce the PageHuge check and assume any contiguous region with hugetlbfs pages is unsuitable for a new 1G allocation. The hpagealloc test allocates huge pages in batches and reports the average latency per page over time. This test happens just after boot when fragmentation is not an issue. Units are in milliseconds. hpagealloc 6.3.0-rc6 6.3.0-rc6 6.3.0-rc6 vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2 Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%) 1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%) 2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%) 3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%) Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%) Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%) Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%) Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%) Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%) Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%) Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%) Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%* 6.3.0-rc6 6.3.0-rc6 6.3.0-rc6 vanilla revert-v1 hugeallocfix-v2 Duration User 0.28 0.27 0.30 Duration System 808.66 17.77 35.99 Duration Elapsed 830.87 18.08 36.33 The vanilla kernel is poor, taking up to 1.3 second to allocate a huge page and almost 10 minutes in total to run the test. Reverting the problematic commit reduces it to 8ms at worst and the patch takes 26ms. This patch fixes the main issue with skipping huge pages but leaves the page_count() out because a page with an elevated count potentially can migrate. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022 Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net Fixes: eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Yuanxi Liu <y.liu@naruida.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18mm/mmap: regression fix for unmapped_area{_topdown}Liam R. Howlett
The maple tree limits the gap returned to a window that specifically fits what was asked. This may not be optimal in the case of switching search directions or a gap that does not satisfy the requested space for other reasons. Fix the search by retrying the operation and limiting the search window in the rare occasion that a conflict occurs. Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com Fixes: 3499a13168da ("mm/mmap: use maple tree for unmapped_area{_topdown}") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18maple_tree: fix mas_empty_area() searchLiam R. Howlett
The internal function of mas_awalk() was incorrectly skipping the last entry in a node, which could potentially be NULL. This is only a problem for the left-most node in the tree - otherwise that NULL would not exist. Fix mas_awalk() by using the metadata to obtain the end of the node for the loop and the logical pivot as apposed to the raw pivot value. Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18maple_tree: make maple state reusable after mas_empty_area_rev()Liam R. Howlett
Stop using maple state min/max for the range by passing through pointers for those values. This will allow the maple state to be reused without resetting. Also add some logic to fail out early on searching with invalid arguments. Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18mm: kmsan: handle alloc failures in kmsan_ioremap_page_range()Alexander Potapenko
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range() must also properly handle allocation/mapping failures. In the case of such, it must clean up the already created metadata mappings and return an error code, so that the error can be propagated to ioremap_page_range(). Without doing so, KMSAN may silently fail to bring the metadata for the page range into a consistent state, which will result in user-visible crashes when trying to access them. Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/ Reviewed-by: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush()Alexander Potapenko
As reported by Dipanjan Das, when KMSAN is used together with kernel fault injection (or, generally, even without the latter), calls to kcalloc() or __vmap_pages_range_noflush() may fail, leaving the metadata mappings for the virtual mapping in an inconsistent state. When these metadata mappings are accessed later, the kernel crashes. To address the problem, we return a non-zero error code from kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping failure inside it, and make vmap_pages_range_noflush() return an error if KMSAN fails to allocate the metadata. This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(), as these allocation failures are not fatal anymore. Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/ Reviewed-by: Marco Elver <elver@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:59:36 +0000