summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-14wifi: iwlwifi: mvm: track AP STA pointer and use it for MFPJohannes Berg
Instead of relying on the AP STA ID and dereferencing our firmware -> mac80211 STA array when we really only need the STA, not the per-link information (and might not have it, e.g. for a pairwise key installation where this is relevant), keep track of the AP STA as a pointer to the mac80211 STA, protected by the mutex. Then use it here in the key code instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.7db01b1508de.I88e6d252cdb0a6e4581d7c5fd7cbc037b4fd40ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_bufHyunwoo Kim
An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges. Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: fw: move memset before early returnTom Rix
Clang static analysis reports this representative issue dbg.c:1455:6: warning: Branch condition evaluates to a garbage value if (!rxf_data.size) ^~~~~~~~~~~~~~ This check depends on iwl_ini_get_rxf_data() to clear rxf_data but the function can return early without doing the clear. So move the memset before the early return. Fixes: cc9b6012d34b ("iwlwifi: yoyo: use hweight_long instead of bit manipulating") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: initialize seq variableTom Rix
Clang static analysis reports this issue d3.c:567:22: warning: The left operand of '>' is a garbage value if (seq.tkip.iv32 > cur_rx_iv32) ~~~~~~~~~~~~~ ^ seq is never initialized. Call ieee80211_get_key_rx_seq() to initialize seq. Fixes: 0419e5e672d6 ("iwlwifi: mvm: d3: separate TKIP data from key iteration") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: Fix spelling mistake "Gerenal" -> "General"Colin Ian King
There is a spelling mistake in a IWL_DEBUG_SCAN debug message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.eac55cbef8f1.I15cc5d3f1489759bf915bfb3cbbb72b67b18f8b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: Fix spelling mistake "upto" -> "up to"Colin Ian King
There is a spelling mistake in a IWL_ERR error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.a00965734d02.I760cb43829b3d7a0f567f0958059f2fae0aa8a93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: enable new MLD FW APIMiri Korenblit
Enable the new FW API with MLD based on FW TLV. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.5dc66b08539e.I1c65024c879346b0349e1e431d36ec2b5fd85dd7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: add a new PCI device ID for BZ deviceMukesh Sisodiya
Add support for a new PCI device ID 0x272b once registering with PCIe. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.56342664110d.I5aa6f2858fdcf69fdea4f1a873115a48bd43764e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: Add RF Step Type for BZ deviceMukesh Sisodiya
Add RF step id handling and handle for BZ device. Read CNV Aux register and uses for no OTP case. Add missing rf support for Bz/Bnj device and correct/add the mapping for rf-type if OTP not present. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: scan legacy bands and UHB channels with same antennaAyala Beker
In case of UHB scan that follows a scan on legacy bands, consider both scan commands as part of the same scan cycle, and thus configure them to use the same antenna configuration. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: yoyo: Fix possible division by zeroDaniel Gabay
Don't allow buffer allocation TLV with zero req_size since it leads later to division by zero in iwl_dbg_tlv_alloc_fragments(). Also, NPK/SRAM locations are allowed to have zero buffer req_size, don't discard them. Fixes: a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: yoyo: skip dump correctly on hw errorDaniel Gabay
When NIC is in a bad state, reading data will return 28 bits as 0xa5a5a5a and the lowest 4 bits are not fixed value. Mask these bits in a few places to skip the dump correctly. Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: pcie: fix possible NULL pointer dereferenceDaniel Gabay
It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x4c/0x90 bus_remove_driver+0x5c/0xd0 driver_unregister+0x31/0x50 pci_unregister_driver+0x40/0x90 iwl_pci_unregister_driver+0x15/0x20 [iwlwifi] __exit_compat+0x9/0x98 [iwlwifi] __x64_sys_delete_module+0x147/0x260 Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: Fix the duplicate dump nameMukesh Sisodiya
Driver is using the dump name generated first time in all generated dump in case of NMI. The validity of dump name should be with each dump created and need to reset after each use. Fixes: 834f920ef34b ("wifi: iwlwifi: yoyo: Add driver defined dump file name") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.6c987f820557.I924f2eae1eef2fe82c7a23be566551653d46f729@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: pcie: work around ROM bug on AX210 integratedJohannes Berg
On 22000 and AX210 devices, there's a ROM bug that causes it to set invalid LTR settings. On 22000 and AX210 non-integrated we can fix up these settings from the driver (as done in the code here), but on AX210 integrated these registers are not available to the driver. Attempt to work around the issue by spinning while the IML is being loaded, the IML will then reprogram the LTR values itself after it's loaded, so only the brief IML load (which the ROM is doing) is affected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.aaa0a4339984.If08da23e960b6236f8c05c06fc8b26041ac89f1e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: add DSM_FUNC_ENABLE_6E value to debugfsJohannes Berg
In order to simplify checking that this value was set up correctly, add it to debugfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c9a787710e1e.If509b2e510e22d62f3eefb2c54ff1645e331dc23@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: cleanup beacon_inject_active during hw restartMiri Korenblit
beacon_inject_active turns true and false via debugfs when we inject a beacon. During the time of the beacon injection we can't configure the FW with a beacon cmd. If we have a hw restart during the beacon injection then in the recovery flow we will not be able to configure the beacon cmd to the FW. Fix this by cleaning up this variable after an hw restart. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.b021bce5e162.Ia5a0a0b5d8734f63077ceaac936176a345f8d3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: support wowlan info notification version 2Haim Dreyfuss
As part of version 2 we don't need to have wake_packet_bufsize and wake_packet_length. The first one is already calculated by the driver, the latter is sent as part of the wake packet notification. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: make HLTK configuration for PASN station optionalAvraham Stern
When secure LTF is not used, the HLTK is not derived during the PASN authentication. Make the HLTK optional when adding a PASN station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: request limiting to 8 MSDUs per A-MSDUJohannes Berg
Due to hardware limitations when splitting up A-MSDUs, it cannot handle an arbitrary number of MSDUs per A-MSDU. Set the bits to ask transmitters to send only 8 MSDUs in one A-MSDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.e6c518f2724f.I15c13d13b38289edbcd64f67d57cf18f6026457a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: fix shift-out-of-boundsAvraham Stern
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is later used for a bitmask of the queue, which results in a shift-out-of-bounds. Fix it. Fixes: b85f7ebb2497 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: acpi: support modules with high antenna gainAlon Giladi
Starting from version 4 of ANT_GAIN_CMD verification of ppag table values is done by the FW. Driver has to send the complete table as it appears in the BIOS. Make this change. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: don't drop unencrypted MCAST framesAyala Beker
MCAST frames are filtered out by the driver if we are not authorized yet. Fix it to filter out only protected frames. Fixes: 147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: dbg: print pc register data once fw dump occurredMukesh Sisodiya
Add debug print for different FW program counter details of different CPU. Program counter pc details will be read from TLV during init. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14Merge branch 'msg_control-split'David S. Miller
Kevin Brodsky says: ==================== net: Finish up ->msg_control{,_user} split Commit 1f466e1f15cf ("net: cleanly handle kernel vs user buffers for ->msg_control") introduced the msg_control_user and msg_control_is_user fields in struct msghdr, to ensure that user pointers are represented as such. It also took care of converting most users of struct msghdr::msg_control where user pointers are involved. It did however miss a number of cases, and some code using msg_control inappropriately has also appeared in the meantime. This series is attempting to complete the split, by eliminating the remaining cases where msg_control is used when in fact a user pointer is stored in the union (patch 1). It also addresses a couple of issues with msg_control_is_user: one where it is not updated as it should (patch 2), and one where it is not initialised (patch 3). v1..v2: * Split out the msg_control_is_user fixes into separate patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net/ipv6: Initialise msg_control_is_userKevin Brodsky
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the IPV6_2292PKTOPTIONS case. Make sure to initialise msg_control_is_user accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net/compat: Update msg_control_is_user when setting a kernel pointerKevin Brodsky
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how the kmsg->msg_control* fields are used. The input struct msghdr holds a pointer to a user buffer, i.e. ksmg->msg_control_user is active. However, upon success, a kernel pointer is stored in kmsg->msg_control. kmsg->msg_control_is_user should therefore be updated accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: Ensure ->msg_control_user is used for user buffersKevin Brodsky
Since commit 1f466e1f15cf ("net: cleanly handle kernel vs user buffers for ->msg_control"), pointers to user buffers should be stored in struct msghdr::msg_control_user, instead of the msg_control field. Most users of msg_control have already been converted (where user buffers are involved), but not all of them. This patch attempts to address the remaining cases. An exception is made for null checks, as it should be safe to use msg_control unconditionally for that purpose. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14vsock/loopback: don't disable irqs for queue accessArseniy Krasnov
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'. The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'. There is no need to disable interrupts in the loopback transport as there is no access to the queue with skbs from interrupt context. Both virtio and vhost transports work in the same way. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_aggGwangun Jung
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device. The MTU of the loopback device can be set up to 2^31-1. As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX. Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors. The following reports a oob access: [ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301 [ 84.583686] [ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1 [ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 84.584644] Call Trace: [ 84.584787] <TASK> [ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) [ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) [ 84.585570] kasan_report (mm/kasan/report.c:538) [ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255) [ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776) [ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212) [ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228) [ 84.589460] ip_output (net/ipv4/ip_output.c:430) [ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606) [ 84.590285] raw_sendmsg (net/ipv4/raw.c:649) [ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.592084] __sys_sendto (net/socket.c:2142) [ 84.593306] __x64_sys_sendto (net/socket.c:2150) [ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.594070] RIP: 0033:0x7fe568032066 [ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c Code starting with the faulting instruction =========================================== [ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066 [ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003 [ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010 [ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001 [ 84.596218] </TASK> [ 84.596295] [ 84.596351] Allocated by task 291: [ 84.596467] kasan_save_stack (mm/kasan/common.c:46) [ 84.596597] kasan_set_track (mm/kasan/common.c:52) [ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384) [ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974) [ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938) [ 84.597100] qdisc_create (net/sched/sch_api.c:1244) [ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680) [ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174) [ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574) [ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365) [ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942) [ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.598016] ____sys_sendmsg (net/socket.c:2501) [ 84.598147] ___sys_sendmsg (net/socket.c:2557) [ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586) [ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.598688] [ 84.598744] The buggy address belongs to the object at ffff88810f674000 [ 84.598744] which belongs to the cache kmalloc-8k of size 8192 [ 84.599135] The buggy address is located 2664 bytes to the right of [ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0) [ 84.599544] [ 84.599598] The buggy address belongs to the physical page: [ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670 [ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000 [ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000 [ 84.601009] page dumped because: kasan: bad access detected [ 84.601187] [ 84.601241] Memory state around the buggy address: [ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602069] ^ [ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602693] ================================================================== [ 84.602924] Disabling lock debugging due to kernel taint Fixes: 3015f3d2a3cd ("pkt_sched: enable QFQ to support TSO/GSO") Reported-by: Gwangun Jung <exsociety@gmail.com> Signed-off-by: Gwangun Jung <exsociety@gmail.com> Acked-by: Jamal Hadi Salim<jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14Merge branch 'mana-jumbo-frames'David S. Miller
Haiyang Zhang says: ==================== net: mana: Add support for jumbo frame The set adds support for jumbo frame, with some optimization for the RX path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: mana: Add support for jumbo frameHaiyang Zhang
During probe, get the hardware-allowed max MTU by querying the device configuration. Users can select MTU up to the device limit. When XDP is in use, limit MTU settings so the buffer size is within one page. And, when MTU is set to a too large value, XDP is not allowed to run. Also, to prevent changing MTU fails, and leaves the NIC in a bad state, pre-allocate all buffers before starting the change. So in low memory condition, it will return error, without affecting the NIC. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: mana: Enable RX path to handle various MTU sizesHaiyang Zhang
Update RX data path to allocate and use RX queue DMA buffers with proper size based on potentially various MTU sizes. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: mana: Refactor RX buffer allocation code to prepare for various MTUHaiyang Zhang
Move out common buffer allocation code from mana_process_rx_cqe() and mana_alloc_rx_wqe() to helper functions. Refactor related variables so they can be changed in one place, and buffer sizes are in sync. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14net: mana: Use napi_build_skb in RX pathHaiyang Zhang
Use napi_build_skb() instead of build_skb() to take advantage of the NAPI percpu caches to obtain skbuff_head. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-14ALSA: hda/hdmi: disable KAE for Intel DG2Kai Vehmanen
Use of keep-alive (KAE) has resulted in loss of audio on some A750/770 cards as the transition from keep-alive to stream playback is not working as expected. As there is limited benefit of the new KAE mode on discrete cards, revert back to older silent-stream implementation on these systems. Cc: stable@vger.kernel.org Fixes: 15175a4f2bbb ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8307 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230413191153.3692049-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-13Merge tag 'mlx5-updates-2023-04-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-04-11 1) Vlad adds the support for linux bridge multicast offload support Patches #1 through #9 Synopsis Vlad Says: ============== Implement support of bridge multicast offload in mlx5. Handle port object attribute SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED notification to toggle multicast offload and bridge snooping support on bridge. Handle port object SWITCHDEV_OBJ_ID_PORT_MDB notification to attach a bridge port to MDB. Steering architecture Existing offload infrastructure relies on two levels of flow tables - bridge ingress and egress. For multicast offload the architecture is extended with additional layer of per-port multicast replication tables. Such tables filter loopback traffic (so packets are not replicated to their source port) and pop VLAN headers for "untagged" VLANs. The tables are referenced by the MDB rules in egress table. MDB egress rule can point to multiple per-port multicast tables, which causes matching multicast traffic to be replicated to all of them, and, consecutively, to several bridge ports: +--------+--+ +---------------------------------------> Port 1 | | | +-^------+--+ | | | | +-----------------------------------------+ | +---------------------------+ | | EGRESS table | | +--> PORT 1 multicast table | | +----------------------------------+ +-----------------------------------------+ | | +---------------------------+ | | INGRESS table | | | | | | | | +----------------------------------+ | dst_mac=P1,vlan=X -> pop vlan, goto P1 +--+ | | FG0: | | | | | dst_mac=P1,vlan=Y -> pop vlan, goto P1 | | | src_port=dst_port -> drop | | | src_mac=M1,vlan=X -> goto egress +---> dst_mac=P2,vlan=X -> pop vlan, goto P2 +--+ | | FG1: | | | ... | | dst_mac=P2,vlan=Y -> goto P2 | | | | VLAN X -> pop, goto port | | | | | dst_mac=MDB1,vlan=Y -> goto mcast P1,P2 +-----+ | ... | | +----------------------------------+ | | | | | VLAN Y -> pop, goto port +-------+ +-----------------------------------------+ | | | FG3: | | | | matchall -> goto port | | | | | | | +---------------------------+ | | | | | | +--------+--+ +---------------------------------------> Port 2 | | | +-^------+--+ | | | | | +---------------------------+ | +--> PORT 2 multicast table | | +---------------------------+ | | | | | FG0: | | | src_port=dst_port -> drop | | | FG1: | | | VLAN X -> pop, goto port | | | ... | | | | | | FG3: | | | matchall -> goto port +-------+ | | +---------------------------+ Patches overview: - Patch 1 adds hardware definition bits for capabilities required to replicate multicast packets to multiple per-port tables. These bits are used by following patches to only attempt multicast offload if firmware and hardware provide necessary support. - Pathces 2-4 patches are preparations and refactoring. - Patch 5 implements necessary infrastructure to toggle multicast offload via SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED port object attribute notification. This also enabled IGMP and MLD snooping. - Patch 6 implements per-port multicast replication tables. It only supports filtering of loopback packets. - Patch 7 extends per-port multicast tables with VLAN pop support for 'untagged' VLANs. - Patch 8 handles SWITCHDEV_OBJ_ID_PORT_MDB port object notifications. It creates MDB replication rules in egress table that can replicate packets to multiple per-port multicast tables. - Patch 9 adds tracepoints for MDB events. ============== 2) Parav Create a new allocation profile for SFs, to save on memory 3) Yevgeny provides some initial patches for upcoming software steering support new pattern/arguments type of modify_header actions. Starting with ConnectX-6 DX, we use a new design of modify_header FW object. The current modify_header object allows for having only limited number of these FW objects, which means that we are limited in the number of offloaded flows that require modify_header action. As a preparation Yevgeny provides the following 4 patches: - Patch 1: Add required mlx5_ifc HW bits - Patch 2, 3: Add new WQE type and opcode that is required for pattern/arg support and adds appropriate support in dr_send.c - Patch 4: Add ICM pool for modify-header-pattern objects and implement patterns cache, allowing patterns reuse for different flows * tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Add modify-header-pattern ICM pool net/mlx5: DR, Prepare sending new WQE type net/mlx5: Add new WQE for updating flow table net/mlx5: Add mlx5_ifc bits for modify header argument net/mlx5: DR, Set counter ID on the last STE for STEv1 TX net/mlx5: Create a new profile for SFs net/mlx5: Bridge, add tracepoints for multicast net/mlx5: Bridge, implement mdb offload net/mlx5: Bridge, support multicast VLAN pop net/mlx5: Bridge, add per-port multicast replication tables net/mlx5: Bridge, snoop igmp/mld packets net/mlx5: Bridge, extract code to lookup parent bridge of port net/mlx5: Bridge, move additional data structures to priv header net/mlx5: Bridge, increase bridge tables sizes net/mlx5: Add mlx5_ifc definitions for bridge multicast support ==================== Link: https://lore.kernel.org/r/20230412040752.14220-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13Merge branch ↵Jakub Kicinski
'add-kernel-tc-mqprio-and-tc-taprio-support-for-preemptible-traffic-classes' Vladimir Oltean says: ==================== Add kernel tc-mqprio and tc-taprio support for preemptible traffic classes The last RFC in August 2022 contained a proposal for the UAPI of both TSN standards which together form Frame Preemption (802.1Q and 802.3): https://lore.kernel.org/netdev/20220816222920.1952936-1-vladimir.oltean@nxp.com/ It wasn't clear at the time whether the 802.1Q portion of Frame Preemption should be exposed via the tc qdisc (mqprio, taprio) or via some other layer (perhaps also ethtool like the 802.3 portion, or dcbnl), even though the options were discussed extensively, with pros and cons: https://lore.kernel.org/netdev/20220816222920.1952936-3-vladimir.oltean@nxp.com/ So the 802.3 portion got submitted separately and finally was accepted: https://lore.kernel.org/netdev/20230119122705.73054-1-vladimir.oltean@nxp.com/ leaving the only remaining question: how do we expose the 802.1Q bits? This series proposes that we use the Qdisc layer, through separate (albeit very similar) UAPI in mqprio and taprio, and that both these Qdiscs pass the information down to the offloading device driver through the common mqprio offload structure (which taprio also passes). An implementation is provided for the NXP LS1028A on-board Ethernet endpoint (enetc). Previous versions also contained support for its embedded switch (felix), but this needs more work and will be submitted separately. v4: https://lore.kernel.org/netdev/20230403103440.2895683-1-vladimir.oltean@nxp.com/ v2: https://lore.kernel.org/netdev/20230219135309.594188-1-vladimir.oltean@nxp.com/ v1: https://lore.kernel.org/netdev/20230216232126.3402975-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20230411180157.1850527-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net: enetc: add support for preemptible traffic classesVladimir Oltean
PFs which support the MAC Merge layer also have a set of 8 registers called "Port traffic class N frame preemption register (PTC0FPR - PTC7FPR)". Through these, a traffic class (group of TX rings of same dequeue priority) can be mapped to the eMAC or to the pMAC. There's nothing particularly spectacular here. We should probably only commit the preemptible TCs to hardware once the MAC Merge layer became active, but unlike Felix, we don't have an IRQ that notifies us of that. We'd have to sleep for up to verifyTime (127 ms) to wait for a resolution coming from the verification state machine; not only from the ndo_setup_tc() code path, but also from enetc_mm_link_state_update(). Since it's relatively complicated and has a relatively small benefit, I'm not doing it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net: enetc: rename "mqprio" to "qopt"Vladimir Oltean
To gain access to the larger encapsulating structure which has the type tc_mqprio_qopt_offload, rename just the "qopt" field as "qopt". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: taprio: allow per-TC user input of FP adminStatusVladimir Oltean
This is a duplication of the FP adminStatus logic introduced for tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload structure embedded within tc_taprio_qopt_offload. So practically, if a device driver is written to treat the mqprio portion of taprio just like standalone mqprio, it gets unified handling of frame preemption. I would have reused more code with taprio, but this is mostly netlink attribute parsing, which is hard to transform into generic code without having something that stinks as a result. We have the same variables with the same semantics, just different nlattr type values (TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12; TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and consequently, different policies for the nest. Every time nla_parse_nested() is called, an on-stack table "tb" of nlattr pointers is allocated statically, up to the maximum understood nlattr type. That array size is hardcoded as a constant, but when transforming this into a common parsing function, it would become either a VLA (which the Linux kernel rightfully doesn't like) or a call to the allocator. Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE" and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE" use cases. HOLD and RELEASE events are emitted towards the underlying MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space, one can distinguish between the 2 use cases by choosing whether to use the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES. A small part of the change is dedicated to refactoring the max_sdu nlattr parsing to put all logic under the "if" that tests for presence of that nlattr. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: mqprio: allow per-TC user input of FP adminStatusVladimir Oltean
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each packet priority can be assigned to a "frame preemption status" value of either "express" or "preemptible". Express priorities are transmitted by the local device through the eMAC, and preemptible priorities through the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge layer). The FP adminStatus is defined per packet priority, but 802.1Q clause 12.30.1.1.1 framePreemptionAdminStatus also says that: | Priorities that all map to the same traffic class should be | constrained to use the same value of preemption status. It is impossible to ignore the cognitive dissonance in the standard here, because it practically means that the FP adminStatus only takes distinct values per traffic class, even though it is defined per priority. I can see no valid use case which is prevented by having the kernel take the FP adminStatus as input per traffic class (what we do here). In addition, this also enforces the above constraint by construction. User space network managers which wish to expose FP adminStatus per priority are free to do so; they must only observe the prio_tc_map of the netdev (which presumably is also under their control, when constructing the mqprio netlink attributes). The reason for configuring frame preemption as a property of the Qdisc layer is that the information about "preemptible TCs" is closest to the place which handles the num_tc and prio_tc_map of the netdev. If the UAPI would have been any other layer, it would be unclear what to do with the FP information when num_tc collapses to 0. A key assumption is that only mqprio/taprio change the num_tc and prio_tc_map of the netdev. Not sure if that's a great assumption to make. Having FP in tc-mqprio can be seen as an implementation of the use case defined in 802.1Q Annex S.2 "Preemption used in isolation". There will be a separate implementation of FP in tc-taprio, for the other use cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: pass netlink extack to mqprio and taprio offloadVladimir Oltean
With the multiplexed ndo_setup_tc() model which lacks a first-class struct netlink_ext_ack * argument, the only way to pass the netlink extended ACK message down to the device driver is to embed it within the offload structure. Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload. Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload structure, and since device drivers might effectively reuse their mqprio implementation for the mqprio portion of taprio, we make taprio set the extack in both offload structures to point at the same netlink extack message. In fact, the taprio handling is a bit more tricky, for 2 reasons. First is because the offload structure has a longer lifetime than the extack structure. The driver is supposed to populate the extack synchronously from ndo_setup_tc() and leave it alone afterwards. To not have any use-after-free surprises, we zero out the extack pointer when we leave taprio_enable_offload(). The second reason is because taprio does overwrite the extack message on ndo_setup_tc() error. We need to switch to the weak form of setting an extack message, which preserves a potential message set by the driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: mqprio: add an extack message to mqprio_parse_opt()Vladimir Oltean
Ferenc reports that a combination of poor iproute2 defaults and obscure cases where the kernel returns -EINVAL make it difficult to understand what is wrong with this command: $ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1 $ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 RTNETLINK answers: Invalid argument Hopefully with this patch, the cause is clearer: Error: Device does not support hardware offload. The kernel was (and still is) rejecting this because iproute2 defaults to "hw 1" if this command line option is not specified. Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: mqprio: add extack to mqprio_parse_nlattr()Vladimir Oltean
Netlink attribute parsing in mqprio is a minesweeper game, with many options having the possibility of being passed incorrectly and the user being none the wiser. Try to make errors less sour by giving user space some information regarding what went wrong. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net/sched: mqprio: simplify handling of nlattr portion of TCA_OPTIONSVladimir Oltean
In commit 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt)) and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space) following immediately afterwards. In commit feb2cf3dcfb9 ("net/sched: mqprio: refactor nlattr parsing to a separate function"), we've moved the nlattr handling to a smaller function, but yet, a small parse_attr() still remains, and the larger mqprio_parse_nlattr() still does not have access to the beginning, and the length, of the TCA_OPTIONS region containing these other nlattrs. In a future change, the mqprio qdisc will need to iterate through this nlattr region to discover other attributes, so eliminate parse_attr() and add 2 variables in mqprio_parse_nlattr() which hold the beginning and the length of the nlattr range. We avoid the need to memset when nlattr_opt_len has insufficient length by pre-initializing the table "tb". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net: ethtool: create and export ethtool_dev_mm_supported()Vladimir Oltean
Create a wrapper over __ethtool_dev_mm_supported() which also calls ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code layers, such as tc, to make sure that preemptible TCs are supported (this is true if an underlying MAC Merge layer exists). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13tools: ynl: Rename ethtool to ethtool.pyRahul Rameshbabu
Make it explicit that this tool is not a drop-in replacement for ethtool. This tool is intended for testing ethtool functionality implemented in the kernel and should use a name that differentiates it from the ethtool utility. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20230413012252.184434-2-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13tools: ynl: Remove absolute paths to yaml files from ethtool testing toolRahul Rameshbabu
Absolute paths for the spec and schema files make the ethtool testing tool unusable with freshly checked-out source trees. Replace absolute paths with relative paths for both files in the Documentation/ directory. Issue seen before the change Traceback (most recent call last): File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 424, in <module> main() File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 158, in main ynl = YnlFamily(spec, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/ynl.py", line 342, in __init__ super().__init__(def_path, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/nlspec.py", line 333, in __init__ with open(spec_path, "r") as stream: FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/google/home/sdf/src/linux/Documentation/netlink/specs/ethtool.yaml' Fixes: f3d07b02b2b8 ("tools: ynl: ethtool testing tool") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20230413012252.184434-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13Merge branch 'macb-ptp-minor-updates'Jakub Kicinski
Harini Katakam says: ==================== Macb PTP minor updates - Enable PTP unicast - Optimize HW timestamp reading ==================== Link: https://lore.kernel.org/r/20230411123712.11459-1-harini.katakam@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 16:19:11 +0000