summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-20net/tls: don't leak IV and record seq when offload failsJakub Kicinski
When device refuses the offload in tls_set_device_offload_rx() it calls tls_sw_free_resources_rx() to clean up software context state. Unfortunately, tls_sw_free_resources_rx() does not free all the state tls_set_sw_offload() allocated - it leaks IV and sequence number buffers. All other code paths which lead to tls_sw_release_resources_rx() (which tls_sw_free_resources_rx() calls) free those right before the call. Avoid the leak by moving freeing of iv and rec_seq into tls_sw_release_resources_rx(). Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20net/tls: avoid potential deadlock in tls_set_device_offload_rx()Jakub Kicinski
If device supports offload, but offload fails tls_set_device_offload_rx() will call tls_sw_free_resources_rx() which (unhelpfully) releases and reacquires the socket lock. For a small fix release and reacquire the device_offload_lock. Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20selftests/net: correct the return value for run_afpackettestsPo-Hsu Lin
The run_afpackettests will be marked as passed regardless the return value of those sub-tests in the script: -------------------- running psock_tpacket test -------------------- [FAIL] selftests: run_afpackettests [PASS] Fix this by changing the return value for each tests. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20staging: kpc2000: add initial set of Daktronics driversGreg Kroah-Hartman
These drivers have been outside of the kernel tree since the 2.x days, and it's time to bring them into the tree so they can get properly cleaned up. This first dump of drivers is based on a tarball Matt gave to me, minus an odd "dma" driver that I could not get to build at all. I renamed a few files, added the proper SPDX lines to it, added Kconfig entries and tied it into the kernel build. I also fixed up a number of initial obvious kernel build warnings, but left the odd bitfield warning that gcc is spitting out, as I'm not quite sure what to do about that. There's loads of low-hanging coding style cleanups in here for people to start attacking, as well as the more obvious logic and api cleanups as well. Cc: Matt Sickler <Matt.Sickler@daktronics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20Staging: rtlwifi: Replace return typeMadhumitha Prabakaran
Replace return type and remove the respective assignment. Issue found by Coccinelle. Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20Staging: rtl8723bs: core: Replace return typesMadhumitha Prabakaran
Remove unwanted assignments and replace return types. Issue suggested by Coccinelle. Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20Merge tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Fix a regression in which an RPC call can be tagged with an error despite the transmission being successful" * tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Ignore queue transmission errors on successful transmission
2019-04-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three minor fixes: two obvious ones in drivers and a fix to the SG_IO path to correctly return status on error" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aic7xxx: fix EISA support Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO" scsi: core: set result when the command cannot be dispatched
2019-04-20Merge tag 'for-linus-20190420' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of small fixes that should go into this series. This contains: - Removal of unused queue member (Hou) - Overflow bvec fix (Ming) - Various little io_uring tweaks (me) - kthread parking - Only call cpu_possible() for verified CPU - Drop unused 'file' argument to io_file_put() - io_uring_enter vs io_uring_register deadlock fix - CQ overflow fix - BFQ internal depth update fix (me)" * tag 'for-linus-20190420' of git://git.kernel.dk/linux-block: block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue io_uring: fix CQ overflow condition io_uring: fix possible deadlock between io_uring_{enter,register} io_uring: drop io_file_put() 'file' argument bfq: update internal depth state when queue depth changes io_uring: only test SQPOLL cpu after we've verified it io_uring: park SQPOLL thread if it's percpu
2019-04-20Merge tag 'i3c/fixes-for-5.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pill i3c fixes from Boris Brezillon: - fix the random PID check - fix the disable controller logic in the designware driver - fix I3C entry in MAINTAINERS * tag 'i3c/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: MAINTAINERS: Fix the I3C entry i3c: dw: Fix dw_i3c_master_disable controller by using correct mask i3c: Fix the verification of random PID
2019-04-20Merge tag 'sound-5.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Two core fixes for long-standing bugs for the races at concurrent device creation and deletion that were (unsurprisingly) spotted by syzkaller with usb-fuzzer. The rest are usual small HD-audio fixes" * tag 'sound-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - add two more pin configuration sets to quirk table ALSA: core: Fix card races between register and disconnect ALSA: info: Fix racy addition/deletion of nodes ALSA: hda: Initialize power_state field properly
2019-04-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Misc clocksource driver fixes, and a sched-clock wrapping fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze() clocksource/drivers/timer-ti-dm: Remove omap_dm_timer_set_load_start clocksource/drivers/oxnas: Fix OX820 compatible clocksource/drivers/arm_arch_timer: Remove unneeded pr_fmt macro clocksource/drivers/npcm: select TIMER_OF
2019-04-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - various tooling fixes - kretprobe fixes - kprobes annotation fixes - kprobes error checking fix - fix the default events for AMD Family 17h CPUs - PEBS fix - AUX record fix - address filtering fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Avoid kretprobe recursion bug kprobes: Mark ftrace mcount handler functions nokprobe x86/kprobes: Verify stack frame on kretprobe perf/x86/amd: Add event map for AMD Family 17h perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf() perf tools: Fix map reference counting perf evlist: Fix side band thread draining perf tools: Check maps for bpf programs perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info() tools include uapi: Sync sound/asound.h copy perf top: Always sample time to satisfy needs of use of ordered queuing perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user) tools lib traceevent: Fix missing equality check for strcmp perf stat: Disable DIR_FORMAT feature for 'perf stat record' perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view perf header: Fix lock/unlock imbalances when processing BPF/BTF info perf/x86: Fix incorrect PEBS_REGS perf/ring_buffer: Fix AUX record suppression perf/core: Fix the address filtering fix kprobes: Fix error check when reusing optimized probes
2019-04-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes all over the place: a console spam fix, section attributes fixes, a KASLR fix, a TLB stack-variable alignment fix, a reboot quirk, boot options related warnings fix, an LTO fix, a deadlock fix and an RDT fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority x86/cpu/bugs: Use __initconst for 'const' init data x86/mm/KASLR: Fix the size of the direct mapping section x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness" x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info" x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T x86/mm: Prevent bogus warnings with "noexec=off" x86/build/lto: Fix truncated .bss with -fdata-sections x86/speculation: Prevent deadlock on ssb_state::lock x86/resctrl: Do not repeat rdtgroup mode initialization
2019-04-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A deadline scheduler warning/race fix, and a cfs_period_us quota calculation workaround where the real fix looks too involved to merge immediately" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Correctly handle active 0-lag timers sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup
2019-04-20Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "A lockdep warning fix and a script execution fix when atomics are generated" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Don't assume that scripts are executable locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again
2019-04-20hwmon: (max6650) add thermal cooling device capabilityJean-Francois Dagenais
This allows max6650 devices to be referenced in dts as a cooling device. The pwm value seems duplicated in cooling_dev_state but since pwm goes through rounding logic into data->dac, it is modified and messes with the thermal zone state algorithms. It's also better to serve a cache value, thus avoiding periodic actual i2c traffic. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-20RAS/CEC: Increment cec_entered under the mutex lockWANG Chao
Modify ->cec_entered in the critical section of the mutex. Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190418034115.75954-2-chao.wang@ucloud.cn
2019-04-20random: add a spinlock_t to struct batched_entropySebastian Andrzej Siewior
The per-CPU variable batched_entropy_uXX is protected by get_cpu_var(). This is just a preempt_disable() which ensures that the variable is only from the local CPU. It does not protect against users on the same CPU from another context. It is possible that a preemptible context reads slot 0 and then an interrupt occurs and the same value is read again. The above scenario is confirmed by lockdep if we add a spinlock: | ================================ | WARNING: inconsistent lock state | 5.1.0-rc3+ #42 Not tainted | -------------------------------- | inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. | ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes: | (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0 | {SOFTIRQ-ON-W} state was registered at: | _raw_spin_lock+0x2a/0x40 | get_random_u32+0x3e/0xe0 | new_slab+0x15c/0x7b0 | ___slab_alloc+0x492/0x620 | __slab_alloc.isra.73+0x53/0xa0 | kmem_cache_alloc_node+0xaf/0x2a0 | copy_process.part.41+0x1e1/0x2370 | _do_fork+0xdb/0x6d0 | kernel_thread+0x20/0x30 | kthreadd+0x1ba/0x220 | ret_from_fork+0x3a/0x50 … | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(batched_entropy_u32.lock); | <Interrupt> | lock(batched_entropy_u32.lock); | | *** DEADLOCK *** | | stack backtrace: | Call Trace: … | kmem_cache_alloc_trace+0x20e/0x270 | ipmi_alloc_recv_msg+0x16/0x40 … | __do_softirq+0xec/0x48d | run_ksoftirqd+0x37/0x60 | smpboot_thread_fn+0x191/0x290 | kthread+0xfe/0x130 | ret_from_fork+0x3a/0x50 Add a spinlock_t to the batched_entropy data structure and acquire the lock while accessing it. Acquire the lock with disabled interrupts because this function may be used from interrupt context. Remove the batched_entropy_reset_lock lock. Now that we have a lock for the data scructure, we can access it from a remote CPU. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19nfp: add SR-IOV trusted VF supportPablo Cascón
By default VFs are not trusted. Add ndo_set_vf_trust support to toggle a new per-VF bit. Coupled with FW with this capability allows a trusted VF to change its MAC even after being administratively set by the PF. Also populate the trusted field on ndo_get_vf_config. Add the same ndo to the representors. Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19random: document get_random_int() familyGeorge Spelvin
Explain what these functions are for and when they offer an advantage over get_random_bytes(). (We still need documentation on rng_is_initialized(), the random_ready_callback system, and early boot in general.) Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19random: fix CRNG initialization when random.trust_cpu=1Jon DeVree
When the system boots with random.trust_cpu=1 it doesn't initialize the per-NUMA CRNGs because it skips the rest of the CRNG startup code. This means that the code from 1e7f583af67b ("random: make /dev/urandom scalable for silly userspace programs") is not used when random.trust_cpu=1. crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314029] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $6 = (struct crng_state **) 0x0 After adding the missing call to numa_crng_init() the per-NUMA CRNGs are initialized again: crash> dmesg | grep random: [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0 [ 0.314031] random: crng done (trusting CPU's manufacturer) crash> print crng_node_pool $1 = (struct crng_state **) 0xffff9a915f4014a0 The call to invalidate_batched_entropy() was also missing. This is important for architectures like PPC and S390 which only have the arch_get_random_seed_* functions. Fixes: 39a8883a2b98 ("random: add a config option to trust the CPU's hwrng") Signed-off-by: Jon DeVree <nuxi@vault24.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19random: move rand_initialize() earlierKees Cook
Right now rand_initialize() is run as an early_initcall(), but it only depends on timekeeping_init() (for mixing ktime_get_real() into the pools). However, the call to boot_init_stack_canary() for stack canary initialization runs earlier, which triggers a warning at boot: random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0 Instead, this moves rand_initialize() to after timekeeping_init(), and moves canary initialization here as well. Note that this warning may still remain for machines that do not have UEFI RNG support (which initializes the RNG pools during setup_arch()), or for x86 machines without RDRAND (or booting without "random.trust=on" or CONFIG_RANDOM_TRUST_CPU=y). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-19Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: add some DFX info for HNS3 driver This patch-set adds some DFX information to HNS3 driver, for easily debug some problems, and fixes some related bugs. [patch 1/12 - 4/12] adds debug info about reset & interrupt events [patch 5/12 - 7/12] adds debug info about TX time out & fixes related bugs [patch 8/12] adds support for setting netif message level [patch 9/12 - 10/12] adds debugfs command to dump NCL & MAC info [patch 11/12] adds VF's queue statistics info updating [patch 12/12] adds a check for debugfs help function to decide which commands are supportable ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add function type check for debugfs help informationYufeng Mo
PF supports all debugfs command, but VF only supports part of debugfs command. So VF should not show unsupported help information. This patch adds a check for PF and PF to show the supportable help information. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add queue's statistics update to service taskliuzhongzhu
This patch updates VF's TQP statistic info in the service task, and adds a limitation to prevent update too frequently. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: Add handling of MAC tunnel interruptionWeihang Li
MAC tnl interruptions are different from other type of RAS and MSI-X errors, because some bits, such as OVF/LR/RF will occur during link up and down. The drivers should clear status of all MAC tnl interruption bits but shouldn't print any message that would mislead the users. In case that link down and re-up in a short time because of some reasons, we record when they occurred, and users can query them by debugfs. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add support for dump ncl config by debugfsWeihang Li
This patch allow users to dump content of NCL_CONFIG by using debugfs command. Command format: echo dump ncl_config <offset> <length> > cmd It will print as follows: hns3 0000:7d:00.0: offset | data hns3 0000:7d:00.0: 0x0000 | 0x00000020 hns3 0000:7d:00.0: 0x0004 | 0x00000400 hns3 0000:7d:00.0: 0x0008 | 0x08020401 Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: Add support for netif message level settingsYonglong Liu
This patch adds support for network interface message level settings. The message level can be changed by module parameter or ethtool. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: dump more information when tx timeout happensJian Shen
Currently we just print few information when tx timeout happens. In order to find out the cause of timeout, this patch prints more information about the packet statistics, tqp registers and napi state. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: fix loop condition of hns3_get_tx_timeo_queue_info()Jian Shen
In function hns3_get_tx_timeo_queue_info(), it should use netdev->num_tx_queues, instead of netdve->real_num_tx_queues as the loop limitation. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: refine tx timeout count handleJian Shen
In current codes, tx_timeout_cnt is used before increased, then we can see the tx_timeout_count is still 0 from the print when tx timeout happens, e.g. "hns3 0000:7d:00.3 eth3: tx_timeout count: 0, queue id: 0, SW_NTU: 0xa6, SW_NTC: 0xa4, HW_HEAD: 0xa4, HW_TAIL: 0xa6, INT: 0x1" The tx_timeout_cnt should be updated before used. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add some debug info for hclgevf_get_mbx_resp()Huazhong Tan
When wait for response timeout or response code not match, there should be more information for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add some debug information for hclge_check_event_causeHuazhong Tan
When received vector0 msix and other event interrupt, it should print the value of the register for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add reset statistics for VFHuazhong Tan
This patch adds some statistics for VF reset. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: hns3: add reset statistics info for PFHuazhong Tan
This patch adds statistics for PF's reset information, also, provides a debugfs command to dump these statistics. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19Merge branch 'for-5.1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "A patch to fix a RCU imbalance error in the devices cgroup configuration error path" * 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: device_cgroup: fix RCU imbalance in error case
2019-04-19libbpf: fix BPF_LOG_BUF_SIZE off-by-one errorMcCabe, Robert J
The BPF_PROG_LOAD condition for kernel version <= 5.1 is log->len_total > UINT_MAX >> 8 /* (16 * 1024 * 1024) - 1 */ Signed-off-by: McCabe, Robert J <robert.mccabe@rockwellcollins.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-19tcp: properly reset skb->truesize for tx recyclingEric Dumazet
tcp sendmsg() and sendpage() normally advance skb->data_len and skb->truesize by the payload added to an skb. But sendmsg(fd, ..., MSG_ZEROCOPY) has to account for whole pages, even if a single byte of payload is used in the page. This means that we can not assume skb->truesize can be adjusted by skb->data_len. We must instead overwrite its value. Otherwise skb->truesize is too big and can hit socket sndbuf limit, especially if the skb is recycled multiple times :/ Fixes: 472c2e07eef0 ("tcp: add one skb cache for tx") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19selftests/ipc: Fix msgque compiler warningsKees Cook
This fixes the various compiler warnings when building the msgque selftest. The primary change is using sys/msg.h instead of linux/msg.h directly to gain the API declarations. Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-04-19selftests/efivarfs: clean up test files from test_create*()Po-Hsu Lin
Test files created by test_create() and test_create_empty() tests will stay in the $efivarfs_mount directory until the system was rebooted. When the tester tries to run this efivarfs test again on the same system, the immutable characteristics in that directory will cause some "Operation not permitted" noises, and a false-positve test result as the file was created in previous run. -------------------- running test_create -------------------- ./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- running test_create_empty -------------------- ./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- Create a file_cleanup() to remove those test files in the end of each test to solve this issue. For the test_create_read, we can move the clean up task to the end of the test to ensure the system is clean. Also, use this function to replace the existing file removal code. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-04-19selftests: fix headers_install circular dependencyShuah Khan
"make kselftest" fails with "Circular Makefile.o <- prepare dependency dropped." error, when lib.mk invokes "make headers_install". Make level 0: Main make calls selftests run_tests target ... Make level n: selftests lib.mk invokes main make's headers_install The secondary level make inherits builtin-rules which will use the rule to generate Makefile.o and runs into "Circular Makefile.o <- prepare dependency dropped." error, and kselftest compile fails. Invoke headers_install target with --no-builtin-rules to avoid circular error. In addition, lib.mk installs headers in the default HDR_PATH, even when build relocation is requested with O= or export KBUILD_OUTPUT. Fix the problem by passing in INSTALL_HDR_PATH. The headers are installed under the specified output "dir/usr". Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-04-19Merge branch 'for-5.1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fixlet from Dennis Zhou: "This stops printing the base address of percpu memory on initialization" * 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: stop printing kernel addresses
2019-04-19Merge tag 'mlx5-fixes-2019-04-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-04-19 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.7: ('net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query') For -stable v4.19: ('net/mlx5e: Fix the max MTU check in case of XDP') For -stable v5.0: ('net/mlx5e: Fix use-after-free after xdp_return_frame') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19mlxsw: spectrum: Assume CONFIG_NET_DEVLINK is always enabledJiri Pirko
Since commit f6b19b354d50 ("net: devlink: select NET_DEVLINK from drivers") adds implicit select of NET_DEVLINK for mlxsw, the code does not have to deal with the case when CONFIG_NET_DEVLINK is not enabled. So remove the ifcase and adjust Makefile. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19tipc: introduce new socket option TIPC_SOCK_RECVQ_USEDTung Nguyen
When using TIPC_SOCK_RECVQ_DEPTH for getsockopt(), it returns the number of buffers in receive socket buffer which is not so helpful for user space applications. This commit introduces the new option TIPC_SOCK_RECVQ_USED which returns the current allocated bytes of the receive socket buffer. This helps user space applications dimension its buffer usage to avoid buffer overload issue. Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19team: fix possible recursive locking when add slavesHangbin Liu
If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19selftests/net: correct the return value for run_netsocktestsPo-Hsu Lin
The run_netsocktests will be marked as passed regardless the actual test result from the ./socket: selftests: net: run_netsocktests ======================================== -------------------- running socket test -------------------- [FAIL] ok 1..6 selftests: net: run_netsocktests [PASS] This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: dsa: mv88e6xxx: Only reconfigure MAC when something changesAndrew Lunn
phylink will call the mac_config() callback once per second when polling a PHY or a fixed link. The MAC driver is not supposed to reconfigure the MAC if nothing has changed. Make the mv88e6xxx driver look at the current configuration of the port, and return early if nothing has changed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19net: socket: implement 64-bit timestampsArnd Bergmann
The 'timeval' and 'timespec' data structures used for socket timestamps are going to be redefined in user space based on 64-bit time_t in future versions of the C library to deal with the y2038 overflow problem, which breaks the ABI definition. Unlike many modern ioctl commands, SIOCGSTAMP and SIOCGSTAMPNS do not use the _IOR() macro to encode the size of the transferred data, so it remains ambiguous whether the application uses the old or new layout. The best workaround I could find is rather ugly: we redefine the command code based on the size of the respective data structure with a ternary operator. This lets it get evaluated as late as possible, hopefully after that structure is visible to the caller. We cannot use an #ifdef here, because inux/sockios.h might have been included before any libc header that could determine the size of time_t. The ioctl implementation now interprets the new command codes as always referring to the 64-bit structure on all architectures, while the old architecture specific command code still refers to the old architecture specific layout. The new command number is only used when they are actually different. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-27 01:14:18 +0000